To print the headings in report based on coloumn for every page

Hi
In multi layout report ,i am getting the data with headings at first page only.
But my requirement is like below:
·     Report Header details applied to every new page of the generated report. A new page is indicated by each change in (<coloumn name)Reporting Basis) for the Summary Intercompany Matching Report
or
by a change in (coloumn name)Entity for the Detail Intercompany Matching Report.
revert back ASAP

revert back ASAP>All forum volunteers are assisting with other issues right now, your request has been logged and will be answered some time within the next six months.
If this is an urgent request please contact your support representative or engage qualified consultants.
As well as being in the wrong place for your urgent answer you are also in the wrong place for a reports question, if it is Oracle reports which you don't say either.
Reports

Similar Messages

  • Anyone used Code128 Barcode to print the BI Publisher Report?

    Hi,
    Anyone used Code128 Barcode to print the BI Publisher Report?
    Meetu

    Hi,
    I have used in some of my reports.
    Before developing reports with Barcode, there are few setups to be implemented.
    1. Install Barcode fonts.
    2. Install Oracle Reports Barcode PLL library.
    3. Call below function in your query.
    idautomation_uni.Code128(<column_value>, 'TRUE')
    For complete information, you can refer below link:
    http://www.idautomation.com/fonts/tools/oracle/
    Thanks,
    Ajay

  • My photosmart 8250 prints the headings & color blocks on the diagnostic pages, but not the text.

    My photosmart 8250 suddenly stopped printing ( I have Windows 7). The cartridges have ink & there are no error mssgs. The self-test disgnostic prints the headings, borders & color blocks, but not the text under each heading. I ran the diagnostic utility & it said there were too many print jobs (?) and I cancelled them as directed.I re-ran the test & It  said there were no problems found. But it still isn't printing. I went to the control panel and ran THAT diagnostic & it said it found some problem with the USB connection, but that it was resolved. But, it STILL won't print.  I tried everything the diagnostic utility suggested - uninstalled and reinstalled the updated  software & driver, restarted the computer, etc. and it still won't print.

    Hi - Try following the steps in this document.  It will walk you through cleaning the rollers, which in many cases is the cause of this type of problem.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Sales report based on Reason for Rejection

    Hi Guru's,
    I have a requirment to get the list of sales orders( Open/ Close) report based on Reason for Rejection.
    Please makesure it should be standard not customization and using tables.
    Thanks & Regards,
    Subbu.

    Hi subburamaiah
    If you want the report you can create a separate SIS report . In that take the input field  as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
    Regards
    Srinath

  • Changing the status of the sales order item based on reason for rejection

    Hi All,
    When a Sales order item is rejected then the status at the item level is changed as 'TECO'.When the reason for rejection is removed the status 'Teco' is reset.This status change can be achieved using the user exit 'MV45AFZZ'.But the exit does not allow re-atp calculation whenver a blocked item is release.I have use the exit 'MV45AFZB' ,through this the status change as well as re-atp calculation takes place.But the status changed(Based on reason of rejection) does not appear in the same screen.The change gets reflected only when the sakes order is saved and i open it again.
    I want the status change to appear in the same screen.I am doing my code in the form 'userexit_check_vbap' of the exit 'MV45AFZB'. Please let me know if there are any user exits or BADI's available for the same(Changing the status of the sales order item based on reason for rejection ).
    Regards,
    S.Subasree

    Hi subburamaiah
    If you want the report you can create a separate SIS report . In that take the input field  as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
    Regards
    Srinath

  • Proxy Server asking for username and password almost 6 times for every page I load, but the same doesn't happen with other browsers like chrome

    The same question keeps popping up again and again "The proxy moz-proxy://proxy.iitm.ac.in:3128 is requesting a username and password. The site says: "moz-proxy://proxy.iitm.ac.in:3128""
    Even after i give the right details, it asks me like 5 more times before it completely loads the page. Some times it happens only 2 times.
    With other browsers like chrome, it asks only in the beginning. it doesn't occur after that.
    This started occurring only recently. i upgraded to firefox 9.0 and it functioned properly for more than 12 hours before it started occuring. i tried downgrading back to 8.0.1 but the problem still continued.

    i'm afraid i need to use proxy settings to connect to internet. The settings are all fine because it used to work properly all this time. i specify the proxy address and the port, which is correct, i am very confident. it is so because the page actually loads on firefox, but not before it asks for my user name and password for it a lot of times, and for every page. for other browsers, it asks only in the beginning, that is, when i start the browser.
    i've put three pics here. under the first two settings, the third image showing the user name and password thingy popping up. this happens a lot of times for every page.

  • Iweb URL is the same for every page

    I have a small website built on iweb with a personal domain name, www.westonbennett.com and if you click on any of my pages the url doesn't change and is still www.westonbennett.com and I would like it to be a unique url for every page. Can anyone help me out?

    Hi,
    welcome to the Apple iWeb Discussion Forums!
    What you did is webforward with cloaking/masking whose result is giving the same url for all pages.
    What you should do to get yourdomain.com/sitename/pagename.html instead is change the CNAME
    Have a look at the following page to know how to achieve that
    http://alyeska.altervista.org/en/iWeb_Domains.html
    Regards,
    Cédric

  • On the old firefox there was a botton for recent pages visited - how can i do it now

    on the old firefox there was a botton for recent pages visited - how can i do it now ?

    You can also hold down the left mouse button on an enabled B/F button to open that list.

  • A Date prompt defaulting the data in Report based on selection

    Gurus,
    I have a requirement , where i have a (in between) date prompt set in the dashboard current defulting to Start Month date and End Month date of current month.
    What the user want is based on the selection using a drop down in dashboard which has got values Last Day, Last week, Last Month , the default values in Date filter should change in dashboard.
    For Eg. If the user select Last Week, the in between date filter show the default date value as Last Week Mon and Last Sun, and should filter out the report based on that.
    Any idea's are welcome....
    Thanks & Regards
    -Saurabh

    Try to see if you can get user to agree on something easier.
    Here are the steps to achieve what you want.
    1. Create a prompt for 1 day, 2 week, and 3 month
    2. Create three separate reports based on above selection, which has page prompt for day/week/month respectively.
    3. Create GN based on step in 1 and then let UI change between three reports you created in step 2
    I hope this helps,
    Best luck

  • Printing the XML Publisher report output  from different trays of printer.

    I am generating the XML Publisher report and the output is in 5 pages and that is sent to the printer
    In the printer there are two trays one tray(tray 1) consists of company watermarked papers and the other tray(tray 2) will be consisting of ordinary papers
    I want to print the first two pages of the report on the papers of first tray and the remaining pages to be printed from another tray consisting of ordinary papers.
    How can i do this in XML Publisher.
    Any response will be appreciated
    Thanks
    Saurav

    Look at the links AJ gave.
    Basically what you will do is create a Data Definition and assign a Data Template to it. Create a (document) Template and assign it to your data definition. You will use the XML Publisher Java API classes to pass parameters to your data template and extract the XML data. Then you will use this in conjunction with your document template and the OAF integration region to present the final output to the user.
    All of these things are in the XML Publisher documentation and Javadocs.

  • How to provide formulae for the columns in report based on date column

    Hi,
    How can we provide formulae for the columns in report, where each column is based on another Date Column.
    Can anyone suggest on this.
    Thanks

    Hi Manu,
    I think you a logical column X on which you created another Logical Column Y.
    Now you want 'Y' to be filtered based on Date Column.
    1. If, my assumption is right - You can do your requirement i.e. Filtering the logical col. 'Y' on Reports.
    Else,
    2. See - Your Logical column 'Y' While creating log. column 'Y' make sure you use any expression builder to filter across Date column. (i.e. using any case statements or where clause).
    Else,
    3. Make sure your First Logical column comes from Table by default (i.e. Create the same col. in d/b so it would be your Physic col. )
    Thank you.
    Edited by: GRK on Jan 28, 2013 7:48 AM

  • Direct Print the pdf of report to default printer

    It is possible to send directly to the default printer the pdf report create by report ??
    Thank's for replay

    Hi,
    please check the following support note.
    Reference
         How to Implement ORARRP with Forms & Reports 9i /10g for Local Printing on Client? (Doc ID 277431.1)
    Disclaimer :
    "orarrp" is supplied "as is" basis, and is NOT supported through Oracle Customer Support Services. This is fully documented in the orarrp documentation provided with the orarrp in the section "Support for orarrp". Should you encounter any problems using "orarrp", please use Oracle Technology Network Forums to direct your questions, rather than logging a Service Requests for Oracle Support Services.
    Hope it helps
    Regards, Roberto

  • The fax confirmation report shows all zeros for officejet 6600 printer

    the fax confirmation page shows all zeors for date and time.  How do I set the printer so it prints the correct date and time?

    Hi CJChristian,
    Welcome to the HP Forums!
    I understand that your confirmation date and time fields are all zeroes with your HP Officejet 6600, and I am happy to help you!
    Please take a look through this guide. Setting Up the Printer Hardware for HP Officejet 6600 and 6700 Premium H711n e-All-in-One Printers. Select the Officejet 6600, and look for Step Seven Set the Date and time.
    Also this guide may help too. Setting up the HP All-in-One to Send and Receive Faxes.
    Hope these guides are useful for you, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Want to print the whole month with or without overtime for each employee

    Hi,
    I have Oracle forms/reports10g R2, Below query returns employee overtime correctly but I want to add the whole month with it in simple words if one employee have overtime for five days in a month I want the query to return the whole month including five overtime days for each employee and let say if we have ten employees query return whole month for each employee either he have or overtime or not how can I implement this in report it becomes agony for me, anyone please suggest a solution.
    Thanks and regards, Khawar.
    ---Query---
    select o.ot_date , o.start_dt_time as start_time, o.end_dt_time as end_time, o.ot_details, et.holiday, et.staff_id, e.staff_name, e.desig
    from overtime o, emp_ot et, employee e
    where o.complain_no = et.complain_no
    and o.inc_type_code = et.inc_type_code
    and et.staff_id = e.staff_id
    order by 1, 2, 3, e.staff_id

    Hi Michael,
    Thanks for reply, I think I didn't explain as I should, I want to print Overtime report for each employee let say employee A123 did overtime for five days in DEC than what I want is to print report for employee A123 for the whole month means when I print report blank cell should come where A123 don't have data (I mean other 25/26 days).
    The structure of tables are as
    SQL> desc overtime
    Name Null? Type
    COMPLAIN_NO NOT NULL NUMBER(5)
    OT_DATE NOT NULL DATE
    START_DT_TIME NOT NULL DATE
    INC_REF_NO NUMBER(5)
    END_DT_TIME NOT NULL DATE
    INC_TYPE_CODE NOT NULL VARCHAR2(10)
    DISTRICT_CODE VARCHAR2(6)
    BUSBAR_VOL VARCHAR2(5)
    OT_DETAILS VARCHAR2(2000)
    SQL> desc EMP_OT
    Name Null? Type
    STAFF_ID NOT NULL VARCHAR2(8)
    COMPLAIN_NO NOT NULL NUMBER(5)
    INC_TYPE_CODE NOT NULL VARCHAR2(10)
    HOLIDAY NUMBER
    Each employee associated with primary key i.e COMPLAIN_NO and INC_TYPE_CODE
    in each OVERTIME table record we may have more than one employee in EMP_OT table.
    above detail may clear my query.
    Thanks and Regards,
    Khawar.

  • How do I print just 1 Crystal Reports Label instead of a whole page?

    I created a label report for our files size 4x6.  We purchased a Brother QL-1050 label printer to print this label.  The problem is, the printer will shoot out a blank label after the printed one.  I am assuming the label printer thinks there are 2 labels on the page instead of 1.  I need to just print the 1 label without getting the second blank label.  Thanks.

    Pam,
    Make sure the Brother printer driver is installed on the development computer and select the the proper label size in the printer setup.
    HTH,
    Jason

Maybe you are looking for