To print transfer order and storage unit labels in lt31
Hi SAP Gurus
1>Is it possible to print Transfer order and Labels simultaneously in tcode LT31(At a time when LT31 is executed
If yes please guide me the selection parameter in Tcode LT31 and if any configuration required in the background
2>Is it possible to print Transfer order and storage unit labels automatically when MIGO is posted.what are the settings required
My client raised a query that before he was able to print both once Migo is posted .But now only trnasfer orders is getting printed but not SU.
Requesting to help in this issues
Thanks in advance
Regards
chandu
you need to define the print control parameter in the customizing and whether you can print both(SU & TO) is depend on the print code which you specify in the setting under
LE----WM---Activities-----Define print control
After MIGO are you transferring the stock to SU managed storage type , as per STANDARD SAP stock goes to 902 which is Non SU managed so here you need to tell us the flow and the storage type where stock goes after MIGO also is that storage type is SU managed or not
Similar Messages
-
How can I reprint a storage unit label (without having to create a new TO)? Assume that the label is damaged and I have to print a new one and replace the damaged one.
Thanks.LT32 prints SU label according to open transfer orders that contain the SU. This is not what I need. I need to reprint the label for an existing SU without having to use a TO. The material is not moved at all.
-
How to cancel more than one transfer order and delivery as once
hi everyone
Thanks for taking the time to read this message.
I need to cancel about 500 transfer order # and corresponding deliveries. I know that using lt15 and vl02n i can achieve this for individual orders. As to Lt16, I donot have authorization to use so i can cotacted my colleague who does. But we could not work out the Storage Unit. What is that?
Is there another transaction that would let me enter a sequence of transfer order# and also Delivery# and let me cancel it at once?
Thanks in AdvanceI would try going route of VL09 to address the deliveries in mass quantity. Can't remember if this will take care of the transfer orders as well. Working at service based company now, so can't really check. If not, perhaps get an ABAPer to write a BDC session to run LT15 in background and delete the transfer orders required. I guess the real point to consider here are the transfer orders confirmed as well? Anyway, give a try with VL09 first.
Thanks,
Jay -
Storage unit labels along with pallet labels in wm
Hello,
could you please explain how to generate storage unit label along with pallet label in wm. for example if 1pallet contains 4 boxes and each box will have20 bottles then we need to print pallet label for 4boxes and unit label for each box with 20 bottles information.
Thanks
Regards,
Pavan KumarHi Pavan,
Based on your requirement and as far as standard SAP are concern there is no form which will help to generate the label in the above format. You need to take the help from development team who can design the format using SMARTFORM functionality as per your requirement. once the form is ready you can assign the print code and the SU lable form to below mentioned node. which will print the label on the printer specified
SPRO ---LE---WM ---Storage unit ---Define print control
additionally have a look on the below mentioned SAP standard link which will give you an idea about the printing of SU
Printing SU Documents Manually - Warehouse Management System (WMS) - SAP Library
Let me know if you need any further information -
Printing transfer order ( tx LT31 ) with smartforms ?
Hi all,
Is it possible to assing a smartform for printing transfer orders? I didn't find any informations about that in this forum...
Thank you in advance !
Olivier.No. The Transfer Order configuration can only accept the SAPScripts.
But however there is a work around.
Create a Smartform.
You can create own your program to select the data for the transfer order and use the smartform in it.
In the Configuration, you can assign this program and a DUMMY SAPScript name (you may leave the standard SAPScript name).
Regards,
Naimesh Patel -
Hi all.
I tested that when in material master (Warehouse management view2) is maintained the relation between loading equipment quantity and storage unit type, system divide total quantity in GR based on this relation and thus there is a TO split. This is OK.
I tried to do this calculation but manually during GR in MIGO, this means, during GR I go to "WM" tab in MIGO transaction and manually introduce this same relation. In this case, no TO split happens, it seems as the system doesn´t recognize the relation introduced in MIGO, just the one introduce in material master. Is it something missing? Is it necessary to activate anything in MIGO? anything related to transfer this informaiton from MIGO into WM?
Thanks!!!!!Even I have faced the same problem. Even if you specify the quantities in the WM tab, the values from master gets picked up while creating TO against material document. You will have to take help of a development for this.
Regards,
Aroop -
Printing Transfer Orders based on Manifest Number (Shipment Number)
Hi All,
We are on R/3 4.6c with Lean Warehouse Management.
We have a requirement to be able to print Transfer Orders which are linked to a given Manifest - wondering if SAP has a standard way of doing this?
Sales Order 01 -> Delivery01 -> Transfer Order_01 \
Sales Order 02 -> Delivery02 -> Transfer Order_02 ]----->>> Manifest_01
Sales Order 03 -> Delivery03 -> Transfer Order_03 /
We would to be able to say for 'Manifest_01' print all related Transfer Orders
All help greatly appreciated.
Thanks,
RavelleA solution has not been identified...query closed.
-
Diff between stock transfer order and stock transport order
pls any body tell me diff between stock transfer order and stock transport order .is both are use for same pursose?pls explain
Check
very imp stock transfer and stock transport order -
BAPI Print transfer order (LT31)
Hi,
Is there any BAPI exist for Transaction LT31 Print Transfer Order?
If anybody hv the code for finding BAPI for particular transaction?
Thanks
SandeepHi Sandeep,
check FM
<b>WS_LM_TRANSFER_ORDER_DISPLAY</b>
<removed_by_moderator>
Regards,
Hemant
Edited by: Julius Bussche on Aug 29, 2008 8:21 PM -
Change in Transfer Order for Storage Type & bin
Hi,
I want to change destination bin change during TO Creation. Steps are given below.
a) SPRO : Storage type setting: Two options are t there in stock placement section
Storage bin cannot be changed during confirmation
1 Storage bin can be changed during confirmation
I set it to 1.
b) LT06 : TO Created.
c) LT12: TO Confirmation: TO lines are coming grayed out. We can not change Destination storage bin, storage type , and section.
Could you please advice me how to change TO Bins change during confirmation.
Clients requirement: System will pick bin automatically. Print will be taken for this. Once placement is done & some of material are not kept as per TO Bin number. its a different bin,. Now User want to change bin number during TO Confirmation.
Thanks ,
GuptaHi Gupta,
In WM customizing - master data - storage type - in the detail data of
the relevant destination storage type you set the flag
'Dst bin ch. during confirm.' from space to 1. Then the destination
storage bin "in general" can be changed at confirmation time.
Additionally you need to setup for the movement types that you are using
that you work with the new confirmation list, see detail of the movement
types, box screen control. (Try changing this setting to '1').
Please also read in the R/3 library - logistics - logistics execution -
warehouse management - warehouse movements - transfer orders - transfer
order confirmation - confirming transfer orders.
Here it is described when the destination bin can't be changed even
with the correct customizing settings.
If you set the indicator for Destination bin change during confirmation
for the desired storage type in Customizing for Warehouse Management
under Logistics Execution -> Warehouse Management -> Master Data ->
Define Storage Type, you will be able to change the destination bin when
confirming a transfer order if, for example, the destination bin
proposed by the system is damaged.
NO destination bin can be entered during confirmation for:
- dynamic coordinates
- return items
- Lean WM (if the destination bin is defined in the movement type)
- posting change TOs
- inventory based on putaway
- additions to existing stock in storage units
- transaction Confirm single item
Please check if your TO is related to one of these cases !!!
Regards,
Mauro -
Hi all ,
I am in need of a fuction module to create a transfer order ( LT03 ) where i am able to pass / specify the source storage unit / handling unit from which the materials can be taken for the TO.
I also need a function module where i can confirm this TO in LT12.
Thank you in advance.
Ponits for sure!!!Hi,
Use FM : L_TO_CONFIRM to confirm the transfer order.
MOVE wa_to_tab4-tanum TO g_confirm_tab-tanum.
MOVE wa_to_tab4-tapos TO g_confirm_tab-tapos.
MOVE wa_to_tab4-altme TO g_confirm_tab-altme.
MOVE wa_to_tab4-nista TO g_confirm_tab-pickm.
IF NOT wa_to_tab4-vlenr IS INITIAL.
MOVE wa_to_tab4-vlenr TO g_confirm_tab-lenum.
ELSE.
MOVE g_vscfld TO g_confirm_tab-lenum.
ENDIF.
MOVE 'X' TO g_confirm_tab-parti.
IF NOT wa_to_tab4-nlpla_old IS INITIAL AND
NOT wa_to_tab4-nltyp_old IS INITIAL.
MOVE wa_to_tab4-nlpla TO g_confirm_tab-nlpla.
g_confirm_tab-squit = 'X'.
ENDIF.
IF wa_to_tab4-nistm > wa_to_tab4-nista.
l_diff = 'X'.
g_confirm_tab-kzdif = wa_to_tab4-kzdif.
ENDIF.
PERFORM get_bint_param USING g_lgnum wa_to_tab4-vltyp
CHANGING l_returns.
CASE l_returns.
WHEN '1' OR '3'.
IF l_diff EQ 'X'.
MOVE wa_to_tab4-nista TO g_confirm_tab-nista.
g_confirm_tab-ndifa = wa_to_tab4-vsolm - wa_to_tab4-nista.
ELSE.
MOVE wa_to_tab4-nista TO g_confirm_tab-nista.
ENDIF.
WHEN '2'.
IF l_diff EQ 'X'.
g_confirm_tab-diffm = wa_to_tab4-verme - wa_to_tab4-nista.
g_confirm_tab-restm = 0.
ELSE.
g_confirm_tab-restm = wa_to_tab4-verme - wa_to_tab4-nista.
g_confirm_tab-diffm = 0.
ENDIF.
g_confirm_tab-pickm = wa_to_tab4-nista.
CONCATENATE '00' wa_to_tab4-vlenr INTO g_confirm_tab-lenum.
ENDCASE.
APPEND g_confirm_tab.
CALL FUNCTION 'L_TO_CONFIRM'
EXPORTING
i_lgnum = wa_to_tab4-lgnum
i_tanum = wa_to_tab4-tanum
I_SQUIT = ' '
I_QUKNZ = ' '
I_SUBST = ' '
i_qname = sy-uname
i_ename = sy-uname
I_SOLEX = 0
I_PERNR = 0
I_STDAT = INIT_DATUM
I_STUZT = 0
I_ENDAT = INIT_DATUM
I_ENUZT = 0
I_ISTWM = 0
I_KOMIM = ' '
I_EINLM = ' '
I_TBELI = ' '
I_UPDATE_TASK = ' '
i_commit_work = 'X'
I_AUSFB = ' '
TABLES
t_ltap_conf = g_confirm_tab
T_LTAP_CONF_HU =
T_LTAP_CONF_HU_SERIAL =
EXCEPTIONS
to_confirmed = 1
to_doesnt_exist = 2
item_confirmed = 3
item_subsystem = 4
item_doesnt_exist = 5
item_without_zero_stock_check = 6
item_with_zero_stock_check = 7
one_item_with_zero_stock_check = 8
item_su_bulk_storage = 9
item_no_su_bulk_storage = 10
one_item_su_bulk_storage = 11
foreign_lock = 12
squit_or_quantities = 13
vquit_or_quantities = 14
bquit_or_quantities = 15
quantity_wrong = 16
double_lines = 17
kzdif_wrong = 18
no_difference = 19
no_negative_quantities = 20
wrong_zero_stock_check = 21
su_not_found = 22
no_stock_on_su = 23
su_wrong = 24
too_many_su = 25
nothing_to_do = 26
no_unit_of_measure = 27
xfeld_wrong = 28
update_without_commit = 29
no_authority = 30
lqnum_missing = 31
charg_missing = 32
no_sobkz = 33
no_charg = 34
nlpla_wrong = 35
two_step_confirmation_required = 36
two_step_conf_not_allowed = 37
pick_confirmation_missing = 38
quknz_wrong = 39
hu_data_wrong = 40
no_hu_data_required = 41
hu_data_missing = 42
hu_not_found = 43
picking_of_hu_not_possible = 44
not_enough_stock_in_hu = 45
serial_number_data_wrong = 46
serial_numbers_not_required = 47
no_differences_allowed = 48
serial_number_not_available = 49
serial_number_data_missing = 50
to_item_split_not_allowed = 51
OTHERS = 52
Regards
Kannaiah -
Palletization and storage unit management
Hi,
On the WM view 2 in material master, there is a section call palletization.
Question:
1 u2013 If this material is going to be used in a storage unit environment, is it COMPULSORY to maintain it? If not maintain it, will I face error during TO creation for SU process?
2 u2013 Because we wouldnu2019t know the Storage unit type upfront until when the truck actually stop at our warehouse, and we using scanner to perform TO creation. Thus, under such scenario, is there a way in the system setup to bypass this maintenance in the material master and later still allow me to put in the SUT Type I desire on the spot?
tuffpalleteziation data is maintained in material master so that at the time of TO system can know how much quantity will be stored on which type of pallet and accordingly system will search for the BIN or it will find out that the bin is full
In case you do not mention it in material master then ceratinly you will get the error that please enter the palletelization data during Transfer order creation
Regards
Rahul -
Set Up stock transfer order between storage location
Hi,
We are already using Inter company Stock transfer order.
Now we have found that it is possible to set up Inter company stock transfer order between two storage location.
Can i have some configuration steps. I have tried it but not working.
Thanks in Advance
Samir BhattHI,
Create a puchase order ME21N ---> Save
Delivery VL10 G ---> Calculation rule (appropriate) --> Assaign the purchase order number here and execute.
Select the Delivery creation line and do the back ground process.
Start the log display and see the delivery document number by the documents button
Goto VL02N --> do picking and PGI --> Then do the MIGO with respect to the delivery document.
Billing (Intercompany pricing conditions should be set).
Regards,
Chetan. -
To print transfer order by range
Hi,
I had 20 transfer order created and I would like to kick off the printing by selection on screen from TO#1 to TO#20.
Is it possible to do so in LT31?
There is a program, RLVSDR40 but it does not have any TCODE linked to it.
Is there a standard TCODE to do so?
ThanksUse LX21 there you have dynamic selection option.Select the option transfer order here you can give the range.
To print a group of transfer orders by a single group number or for a range of group numbers:
In the SAP menu, choose the path Logistics ® Logistics Execution ® Outbound Process ® Goods Issue for Outbound Delivery ® Communication / Printing ® Reprint Picklist -
Hello Gurus
I have this issue, where i have a Transfer Order, when i select Print, it is printing 3 copies of the TO's. i need to change the config so that when i print TO's , it shud print 2 copies only instead of 3 copies.
Could you please help me with this issue.
Thanks in Advance
NidhiHello Nidhi,
Check the settings in OMLV transaction code and change the quantity field in that.
Hope this helps.
Regards
Arif Mansuri
Maybe you are looking for
-
Intel Mac Mini Core Duo Midi USB Issues
Is anyone else having issues getting Midi devices to work with the Intel Mac Mini's? I have several Midi devices that are't working correctly event though I have installed the newest drivers. Currently I am having issues with a M-Audio Midisport 2x2
-
I had to update to IOS 6. In the process it crashed and I had to restore my iPad to factory settings. I've lost Pages and Numbers. They are not listed in the App Store as previously downloaded. How can I get them back without paying for them agai
-
Hi, I had this mssg and i followed the steps as posted by the experts here. <b> Be aware of Note number 597909 when setting line item DataSources Message no. GQPI 063 Diagnosis You have successfully generated an extraction structure for the FI-SL lin
-
DOCUMENTATION BUG: Broken link in APEX 4.0 API Reference
In the See also section of the <tt>apex_util.remove_preference</tt> method, the *"Managing Session State and User Preferences"* link is dead: olink:AEADM110|Managing%20Session%20State%20and%20User%20Preferences
-
View of the adressbook suddenly wrong
i have a problem with the view of my adressbook. after doing something with my mouse ( i think i move something from my name to group) i have a view which looks like 2 layers. the letters overlaps each other with some displacement. i know its very di