To provide financial data with segment info for Statutory consolidation

Hello.
I'd like to know which is the better solution in order to provide company P/L and B/S data with segment info for Statutory consolidation purpose like SEM-BCS or BO-Finance.
(Segment info means like business division for disclosing)
Sometimes PCA accounting info is used and roll-up into FI-SL.
(FI posts Profit center directly or allocates into segment for consolidation)
Do you have any other way to provide financial data with segment from FI?
New GL is good solution??
Please kindly help.
Thanks,
SEM_BW

Hi
Development of New GL and Document splitting is based on to provide the solution for segment reporting to meet the local legal requirements and also to meet company aspirations. Create n number of segments for n number of business requirements.
Cheers
Srinivas

Similar Messages

I'm converting from a PC to iMac. On the PC I have many Inbox folders with PR info for distribution. How do I get these folders from the PC to the iMac?

I'm converting from a PC to iMac. On the PC I have many Inbox folders with PR info for distribution. How do I get these folders from the PC to the iMac? I've used the Windows e mail Inbox folders for an easy access filing cabinet for years, as this all goes out on e mail. Thanks for assisting me!

I think the easiest way would be to use Migration Assistant to get all that over...
http://support.apple.com/kb/HT2518
http://support.apple.com/kb/DL1415

Flexible upload of Reported Financial Data with Dr/Cr Sign

Hi! All.
I want to upload the reported financial data of Cons. Unit with Dr./Cr. Signhowever, there is no field in
Flexible upload that Dr/Cr Sign can be mapped to. If I map Dr/Cr Sign to Free Field , the system does not recognize that (Dr/Cr Sign) field..Please advise.
Secondly, Does the Reptd. Financial data has to have signs for FS Items.why does not the system pick up the signs of the FS Items of Cons. Units from the FS Items defined in BCS??
Thanks for your input.
Victor

Hi Victor,
Do you know the concept of master and transaction data? -- As usually, you populate master data (attributes, like DR/Cr sign as in your case) first, and only then - the transaction data.
Load attributes of FS items through flexible upload or enter them manually.
After that the system will interpet incoming totals records according to the signs of the item and data.
Pay attention to the fact that not only item sign, but also a movement type sign might be interpreted by the system during a load.
Check if in your flexible upload method you checked the appropriate flags: take into account signs of item or MovType.
The interpretation is occurred as follows:
For example, your item has a negative sign and want to see in the totals negative amount. In this case the data record for this item should have a positive sign.
If the load method also takes into account a movement type sign, then loading data with 140 MoveType will result in + amount:
''(in data) * '-'(in item) * '-'(in MoveType) = ''.
However, with MoveType 120 you'll bring into the system the negative amnt:
''(in data) * '-'(in item) * ''(in MoveType) = '-'.
I'm assuming here that you set the appropriate (standard) signs for a MovType.
Best regards,
Eugene

Extracting data with zero values for periods without data

Hello Together,
i extracted data from our hfm application from period 1 to 3.
Now i found that some rows begin with period 2 or 3 because there are no data in period 1 or 2.
So my question is, how i can get zero values for periods with no data.
Hope someone can help me.
Many thanks in advance.
Martin
P.S.: Our actual hfm version is 11.1.1.3
edit

For the periods with no data, HFM does not have a "0" to offer for the data extraction. Since the default data extract from HFM has each period on it's own row in the *.dat file, I don't understand your comment about rows starting with period 2 or 3. In the *.dat file the row for period 1 simply won't exist. Are you using a custom approach/tool for data extraction?
The only time HFM will offer a "0" where there is indeed no data, is if you extract derived data. You must include calculated data, and even then I believe HFM will only extract a "0" for the first period after a period where there was data, and only for flow accounts (Revenue/Expense). so if you have "100" in period 1, and no data in period 2, such that the derived value YTD for period 2 is "0", then you must include calculated values in the extract and you should see "0" for period 2. However, I don't believe HFM will extract "0" for period 3 - instead it will be blank/missing.
In general it could be very dangerous to force HFM to give zeros where there is no data.
--Chris

Report with customer info for an Sales Order with batch details

Hi
Can any one please tell me the SAP REPORT with contains data of customers were shipped a specific product (material number) by batch number. report with the name and address of the customer, the sales order number and the number of products that were shipped.
Thanks
Nick

Hi nick,
See if anybody has worked on SIS (sales information system) in your team.
He can help you out to create one info structure , by selecting desired characteristics, key figure with respective update rules. though its require lot of configuration but you can make it without abap development.
(I couldn"t make it in time to provide you detailed configuration but below given path will take you to the configuration area )
IMG - LG -Logistick information system -logistick data werhouse- data basis- field catalogue.
IMG - LG -Logistick information system -logistick data werhouse- data basis -
infostructure.
IMG - LG -Logistick information system -logistick data werhouse- data basis - updating - update defination & update rules.
( MC18, MC21, MC24,& MC30)this transaction help to create field catelogue, info system, update rule & generation log respectively.
karnesh

How to: Hide (delete) Camera 1 and Camera 2 data in 'file info' for jpeg for email

I want to send an email with an attached jpeg. When sending/opening the jpeg in File Info, it shows the make and model of the camera I am using. I do NOT want to include that information. Have tried different things.
Photoshop CS3 (also tried with CS 2 and Bridge CS 2)
Bridge CS 2
I've set the 'preferences' in Bridge CS 2 to not show the XMP data - but I can't seem to get rid of the Camera data.
Dual intel Mac - 10.4.1 (LOTS of ram)
Photoshop CS3 and Bridge CS2
tried it too with another computer:
Dual intel Imac (extra ram)
Photoshop CS2 and Bridge CS2
Hope someone can help!
Thanks

use Save For Web

BAPI With User Info For SalesOrder

Hi Guys,
I created one sales order how can i get the list of all users and also list of users who have access to particular sales orders.in VBAK there is one field ERNAM- name of the person who created the Object but i want this User detains contain in a BAPI. is there any such BAPI contains the user info. thanks in advance.
Thanks
Kiran.B

In my case, trying to set my full name on my user account with
chfn -f <my name here>
gives the following:
chfn: Permission denied.
I went ahead and edited /etc/passwd, which got the job done.
I'm still curious to know why the real name / full name is not editable via chfn, though.
(I noticed this issue a long time ago, but didn't get sufficiently bothered by it until I used GNOME's Lock Screen function and discovered the Leave message dialog was saying "Leave a message for :", with nothing in place of the full name. Of course this isn't the most useful of features, but it's the principle of the thing...)

How do I import binary data files (with header info) into DIAdem?

We have lots of data acquired by nCode datagate. Files are binary data with header info. How do I import this into DIAdem? Typical (short) file attached. Also of interest, can I stream data from Sony PC208/SIR1000 recorders?
Attachments:
Propshft.dac ‏4 KB

I have successfully imported your file into DIAdem using the nCode file filter included with DIAdem. You might have to make that file filter known to DIAdem by following these steps (this assumes you have version 8 of DIAdem):
1. Go to the 'Window' menu in DIAdem and select 'Close all'
2. Go to the 'Settings' menu and select 'GPI-DLL Registration'
3. Click the 'Add' button in the window and select the 'GfSnCode' DLL in the 'DIAdem/AddInfo' directory
4. The program will prompt you to restart.
5. After you have restarted DIAdem, go to the DATA icon, select 'File - Open' from the DATA menu and in the dialog that appears, choose 'nSoft Data File Format' in the 'Files of type:' field.
6. Select your data file and load
That's it.
With regards to your Sony reco
rder data, I would need to get my hands on an actual data file to try it out. In general, DIAdem can import ANY binary file format by creating a header in the 'File - Import via header' section in DATA. If you have lots of data files from the SONY recorder, a DLL can be created for that specific file format with the free DLL toolkit included with DIAdem.
Leave me a message here if you have any additional questions.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Seperating data with multiple headers

Hello,
I have a data set that has 6 columns with headers containing information for one cycle of a part (Data File is Attached). About 200 rows later I have another set of data with 6 columns for cycle 2 with a space and a new header, and at about another 400 rows later I have the data for cycle 5 with a space and a new header. This pattern repeats throughout the data set.
I need a way to seperate this data so that I can plot the individual cycles. When I import this data set into Diadem with the DataPlugin Wizzard it does not recognize the spaces and new headers. It labels the spaces and headers as "NO VALUE", so there are discontinuities in the data. Is there a way to seperate the cycles in this data set in Diadem?
For example, I would like to have rows 6 thru 215, rows 220 thru 630, rows 635 thru 1046, rows 1051 thru 1462, etc. This way I can plot the individual cycles against the running time.
Solved!
Go to Solution.
Attachments:
Sample_Data2.csv ‏774 KB

Hi wils01,
Here's a DataPlugin I created that loads your posted data file with each cycle in a separate Data Portal Group.
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
wils01_Cycles_CSV.uri ‏9 KB

Type FLTP stores data with E+

Hi,
I created key figures of type FLTP, accurate to 8 bytes and of type number. When I load data, I notice the data content of these key figures or IO that of this type store the data with numbers as, for example, ....E00 or ....E07. Is this normal? How can I make it stored without E00 or E07?
Thanks,
RT

Hi Rob,
No need to wory abt this issue bcos the data display in the cube is only of this format. But when you execute a report on this, you will find that the keyfigures will be displayed of the format XX.YY (30.95 for example). You can also restrict the no.of decimal places in your query definition (right clink on ur KF -> Properties -> no. of decimal places)
Regards,
R.Ravi

REG: BALANCE SHEET IN TO MICROSOFT EXCEL , FINANCIAL STATEMENTS WITH IN SAP

Hi to all !
i) I want to know the transactions code or FM or Report program for to send the
MonthEndBalances in to Excel Spread Sheet.
ii) I want to know the correct configuration of financial statements with in SAP for month end balances And to includes the buisness area... How??
Can any body help for me in this...
Thanks in Advance..
Vikram.C
[email protected]

thankx

DSC 8.6.1 wrong timestamps for logged data with Intel dual core

Problem Description :
Our LV/DCS 8.6.1 application uses shared variables to log data to Citadel. It is running on many similar computers at many companies just fine, but on one particular Intel Dual Core computer, the data in the Citadel db has strange shifting timestamps. Changing bios to startup using single cpu fixes the problem. Could possibly set only certain NI process(es) to single-cpu instead (but which?). The old DSCEngine.exe in LV/DSC 7 had to be run single-cpu... hadn't these kind of issues been fixed by LV 8.6.1 yet?? What about LV 2009, anybody know?? Or is it a problem in the OS or hardware, below the NI line??
This seems similar to an old issue with time synch server problems for AMD processors (Knowledge Base Document ID 4BFBEIQA):
http://digital.ni.com/public.nsf/allkb/1EFFBED34FFE66C2862573D30073C329
Computer info:
- Dell desktop
- Win XP Pro sp3
- 2 G RAM
- 1.58 GHz Core 2 Duo
- LV/DSC 8.6.1 (Pro dev)
- DAQmx, standard instrument control device drivers, serial i/o
(Nothing else installed; OS and LV/DSC were re-installed to try to fix the problem, no luck)
Details:
A test logged data at 1 Hz, with these results: for 10-30 seconds or so, the timestamps were correct. Then, the timestamps were compressed/shifted, with multiple points each second. At perfectly regular 1-minute intervals, the timestamps would be correct again. This pattern repeats, and when the data is graphed, it looks like regular 1-sec interval points, then more dense points, then no points until the next minute (not ON the minute, e.g.12:35:00, but after a minute, e.g.12:35:24, 12:36:24, 12:37:24...). Occasionally (but rarely), restarting the PC would produce accurate timestamps for several minutes running, but then the pattern would reappear in the middle of logging, no changes made.
Test info:
- shared variable configured with logging enabled
- data changing by much more than the deadband
- new value written by Datasocket Write at a steady 1 Hz
- historic data retrieved by Read Traces
- Distributed System Manager shows correct and changing values continuously as they are written

Meg K. B. ,
It sounds like you are experiencing Time Stamp Counter (TSC) Drift as mentioned in the KB's for the AMD Multi-Core processors. However, according to this wikipedia article on TSC's, the Intel Core 2 Duo's "time-stamp counter increments at a constant rate.......Constant TSC behavior ensures that the duration of each clock tick is
uniform and supports the use of the TSC as a wall clock timer even if
the processor core changes frequency." This seems to suggest that it would be not be the case that you are seeing the issue mentioned in the KBs.
Can you provide the exact modle of the Core 2 Duo processor that you are using?
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Information Broadcasting(Event Data change in Info provider)

Hi All,
Does anyone have experince on the functionality Information Broadcasting ,Can you please help me where we use Trigger event when change in the info provider in the process chains.I want to know when we use the (Trigger event in the Broadcaster) in the process chains,how will it take effect in the Information Broadcasting scheduler screen when we select the particular Info provider when there is any data change.Can you please elaborate on the topic if any one has used the event data change in the info provider.Actually I Executed and scheduled the pocess chains, when I go to the Process chain log ,It says that the Job is finished and the data change is occured for the Cube,but I dont get any error message and I dont get any mail to my Inbox.Can you please through some light if anyone has worked on this,Answers are always appreciated and rewarded.
Thanks.

Hi,
Usually we trigger an event in SM64 tcode..if u want to create an event u will go for SM62.
In addition to time- and calendar-based job scheduling, the background processing system supports event-driven scheduling.
Triggering an event notifies the background processing system that a particular condition has been met. The background processing system reacts by starting any jobs that were waiting for that event.
Events are not saved. Once an event occurs and triggers any jobs that were waiting for that event, the event is discarded
U can monitor process chain via Tcode 'CCMS'..
Information broadcasting allows you to make objects with Business Intelligence content available to a wide spectrum of users, according to your own requirements.
Go through this
Information Broadcasting:
http://help.sap.com/saphelp_nw04/helpdata/en/a5/359840dfa5a160e10000000a1550b0/content.htm
Including an Event Data Change in a Process Chain :
http://help.sap.com/saphelp_nw04/helpdata/en/ec/0d0e405c538f5ce10000000a155106/content.htm
Regards-
Siddhu
Message was edited by: sidhartha

Cannot provide connect data for database target system CONFIG_DB

Hello,
I'm trying to install SP22 in NW04 but I'm getting an error on step 11 Deploy JDDI
Cannot provide connect data for database target system "CONFIG_DB".
Cannot connect to database: Cannot create class loaders for DB target system CONFIG_DB.
ERROR      2008-10-01 17:51:09
           CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR      2008-10-01 17:51:09 [iaxxinscbk.cpp:289]
           abortInstallation
MUT-02041 SDM call of deploySdaList ends with returncode 4. See output of logfile C:\Program Files\sapinst_instdir\PATCH\MSS\callSdmViaSapinst.log.
callSdmViaSapinst.log:
com.sap.sdm.apiint.serverext.servertype.TargetServiceException: Cannot provide connect data for database target system "CONFIG_DB".
Additional error message is:
com.sap.sdm.serverext.servertype.dbsc.DatabaseConnectException: Cannot connect to database: Cannot create class loaders for DB target system CONFIG_DB.
Additional error message is:
com.sap.sdm.util.classloaders.SDMClassLoaderException: Cannot create class loader for component com.sap.sdm.serverext.servertype.dbsc.SERVEREXT_DBSC_EXTERN(CONFIG_DB): Referenced loader #0 for component com.sap.sdm.serverext.servertype.dbsc.JDBC_DRIVER(D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\base.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\util.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\spy.jar) is not available.
Additional error message is:
com.sap.sdm.util.classloaders.SDMClassLoaderException: Cannot create class loader for component com.sap.sdm.serverext.servertype.dbsc.JDBC_DRIVER(D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\base.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\util.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\sqlserver.jar;D:\usr\sap/WDA/DVEBMGS00/j2ee\jdbc\spy.jar).
Additional error message is:
com.sap.sdm.util.classloaders.SDMClassLoaderException: Cannot create class loader instance: Jar file #1 cannot be read: D:\usr\sap\WDA\DVEBMGS00\j2ee\jdbc\base.jar
Oct 1, 2008 5:51:08 PM   Info: Summarizing the deployment results:
Oct 1, 2008 5:51:08 PM   Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\SYNCLOG.SDA
Oct 1, 2008 5:51:08 PM   Error: Aborted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\J2EE_JDDSCHEMA.SDA
Oct 1, 2008 5:51:08 PM   Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\COM.SAP.SECURITY.DBSCHEMA.SDA
Oct 1, 2008 5:51:08 PM   Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\XML_DAS_SCHEMA.SDA
Oct 1, 2008 5:51:08 PM   Error: Admitted: D:\Software\parches\del18_al22\J2EE-RUNT-CD\J2EE-ENG\JDD\JMS_JDDSCHEMA.SDA
Oct 1, 2008 5:51:08 PM   Error: Processing error. Return code: 4
the spy.jar was there but some how it got deleted.
Any ideas?
Thanks

For others who may be facing the same problem and would like to have a permanent fix, you can download the largest JDBC drivers from http://service.sap.com/msplatforms and refer to note 639702 and if your system is NW7.0 with EHP1 or SR3, you should also refer to note 1109274.

How to provide the user with a list of files to pick from...for downloading

hai..
I have uploaded the file succesfully.. now we need to download the file...... which has been uploaded..... for that we have implemnted the Query as..
select max(id) from APEX_APPLICATION_FILES ,here the latest uploaded record will be retrieved and shown.
Now We want to provide the user with a list of files to pick from for downloading..,Dat is he should be shown the list of files which is available from dat he has to select one file to downlaod ???
can u plz tell me how to do it....
anoo

Hi Anoo,
Create a report using the following SQL statement:
SELECT ID,
FILENAME,
CREATED_ON
FROM APEX_APPLICATION_FILES
ORDER BY CREATED_ON DESCThere are other fields available from the table, but the above gives you a start.
Then edit the report's Report Attributes.
Edit the CREATED_ON column and pick a Number/Date Format to use for the display and Apply Changes
Edit the ID column. In the Column Link section, enter:
Link Text: <img src="#IMAGE_PREFIX#download.gif" alt="Download">
Target: URL
URL: p?n=#ID#
Apply Changes and run your report
Andy

To provide financial data with segment info for Statutory consolidation

Similar Messages

Maybe you are looking for