To receive material directly into warehouse with out creating TO

Hi all,
Iam having a requirement in warehouse- I want to recive the material directly in to warehouse against a PO with out creating any Transfer order.
I want to know what are all the setups we need to maintain.
Thanks in advance
Venkatesh.

Dear Venkatesh
please understand the client requirement ,
if you want to receipt the good against PO, material post in to inventory management then to warehouse management ,
try this in order to create Automatic TO & Confirm the same
Implementation Guide for R/3 Customizing (IMG)>Logistics Execution>Warehouse Management>Activities>Define Movement Types
in movement type 101 please check the setting under background processing & confirmation for automatic TO creation as well as The transfer order item may be confirmed immediately

Similar Messages

HT1918 Can I receive payment directly into my PayPal account?

Can I receive payment directly into my pay pal account?

If you have funds in your paypal account balance then IF you want to withdraw those funds then click on "withdraw funds" below that balance and you can send it to your bank account.....you can't withdraw to a card.

Hi, I have an early 2008 24" iMac, I need more storage space and was wondering if I could fit a 3TB Western Digital Caviar Green HDD into it with out any problems? This is the one I've seen, Western Digital Caviar 3TB SATA 6 GB/s 64MB Cache 3.5 inch

Hi, I have an early 2008 24" iMac, I need more storage space and was wondering if I could fit a 3TB Western Digital Caviar Green HDD into it with out any problems? This is the one I've seen, Western Digital Caviar 3TB SATA 6 GB/s 64MB Cache 3.5 inch

My bad?
You're original response was questions/post about an iMac. Now you've edited it to ask about a Mac Pro?
You can more easily add internal drives in a Mac Pro.
Not too terribly easy to add/replace drives in an iMac.
If younhave questions about a Mac Pro, try posting in the Mac Pro forums.
Much more knowledgeable users there.

Can position be created with out creating Job..

Hi Experts,
A simple question but quite complicated.
Can position be created with out creating the job. ( yes it will give the warning and create).
Here my actual question comes, what is the need of creating the Job. when we can create position without job in general Scenario.
Is it compulsory to create job whenever we create position.
Your replies are highly appreciated.
Thanks in advance.
Regards,
Dollly

Hi Dolly,
I definitely aggree with what guru Sikindar mentions.
One more point:
SAP advises to create separate positions for each of the employees in your organizational structure.
For example, there may be a hundred "Engineer" positions in your company (with codes: 50000001, 50000002, ... 50000100).
At this point, when you're asked to take a report of all of the "Engineer"s in your company, then you need to enter all these position codes into the selection screen : Nearly impossible scenario!
However, if you had linked all of these positions to a single job named "Engineer" and numbered "50000000", then you would be able to find all the positions linked to this job and all the employees holding these positions by entering a single object ID and evaluation path in the selection screen of a particular report.
Regards,
Dilek

How to read the content from a External Content Type with out creating External List in Sharepoint 2013?

Hi,
I have a requirement to read the External Content Type and storing the Data in a Session Variable. The Reading of the content from External Content Type with out creating a External List.
Please help I am trying to find the solution, but unable to do that.
Thanks,
Pradeep

Hi,
Firstly an external content type designed to work with SharePoint list and there is no way to read apart from this.
If you are looking the solution out of the " Business Connectivity" then find that data source has been exposed through WCF and Web Service ?
So you can use REST API and CSOM to consume those data in SharePoint.
You can also leverage the ADO.NET option if the datasources based on MS technologies.
Murugesa Pandian| MCPD | MCTS |SharePoint 2010

Postings Done to P&L account with out creating CE

Hello Friends,
By mistake P&L account was created with out creating cost element and posting are done with out cost object, so it was not shown in cost and profit center reports, can any one tell me the best approach on how to get already posted transaction flow in to cost and profit center reports.
Thanks in Advance
Regards
Ravi

Hi,
it's possible to create follow-up documents for CO and PCA. For CO documents from FI documents, use OKBA transaction; for PCA documents from FI documents use 1KE8.
There are also transactions for the follow-up postings of logistic documents...
Regards,
Eli

How to install E-bussiness suite with out creating the database?

We are planning to Migrate our Single node Tru64 E-bussines suit installation to multi node IBM-AIX (DB Node) and Sun Solaris(APPL_TOP)
We are thinking to follow below step
1) Install E-Bussines suit with out Oracle Database( Only Oracle DB sotware and Apps Filesystem need to be installed) -- IBM AIX (DB Node) & Sun Solaris (APPL_TOP)
2) Migrate current Oracle DB on Tru64 into IBM AIX using transportable Tablespace method
It is ok to follow this approach?
How to install Oracle E-bussiness suit with out Oracle Database? ( Only Oracle DB sotware and Apps Filesystem need to be installed)
Thanks
John

John,
For migrating the application tier, please refer to the following note:
Note: 238276.1 - Migrating to Linux with Oracle Applications Release 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=238276.1
For the database, you need to export/import the database.
Note: 369693.1 - Using Oracle Applications with a Split Configuration Database Tier on Oracle 10g Release 2
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=369693.1
Note: 362205.1 - 10g Release 2 Export/Import Process for Oracle Applications Release 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362205.1
Note: 304489.1 - Using Oracle Applications with a Split Configuration Database Tier on Oracle 9i Release 2
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=304489.1
Note: 230627.1 - 9i Export/Import Process for Oracle Applications Release 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230627.1
1) Install E-Bussines suit with out Oracle Database( Only Oracle DB sotware and Apps Filesystem need to be installed) -- IBM AIX (DB Node) & Sun Solaris (APPL_TOP)
2) Migrate current Oracle DB on Tru64 into IBM AIX using transportable Tablespace method
It is ok to follow this approach? 1) What about the patches you have applied since the time of the installation? Doing a fresh installation will not include these patches.
2) The supported method to migrate an Oracle Apps database between two Operating Systems which are not binary compatible is by using export/import. I believe transportable Tablespace has some limitations and would not work for such migration.
How to install Oracle E-bussiness suit with out Oracle Database? ( Only Oracle DB sotware and Apps Filesystem need to be installed)You would need to follow the steps in the notes referenced above. However, to answer your question, please refer to:
Oracle Applications Installation Guide: Using Rapid Install - Chapter 5, Installing Technology Stack Components
http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/r115102ins.pdf

WIA import direct into Photoshop *NO FILE CREATED*

This is driving me nuts and I cannot seem to find anything regarding it. I'd use TWAIN happily, but my scanner doesn't seem to have a 64-bit twain driver. So I'm stuck with WIA. But, the thing that drives me crazy is that WIA always creates the file with an arbitrary name and format which I always end up having to delete later. I much preferred the old TWAIN method that just scanned it directly to Photoshop without any file made until you saved it from Photoshop. So, this may actually be more of a Windows M$ question than Photoshop, but I'm giving it a shot here.
Is there anyway to scan directly into Photoshop CS4 64-bit without WIA creating a file at all?

There are no 64 bit TWAIN drivers on Windows.
I think the WIA interface from Microsoft always creates an intermediary file.

How to import a .docx file into Robohelp, with out loosing the embeded images?

OK , so i have a word document which i wanted to import into robohelp 8.02. but when I import it, all the text comes in ok, with formatting, but all the images are left out. the only images that are imported are the bullet points images that I used in word. Please help.

See Snippet 125 on my site.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

TS3850 Cannot capture directly into FCX with my Canon HV20

I am trying to connect my Canon HV20 to capture into Final Cut directly instead of using tape. It shows up but it doesn't control the camera and doesn't capture. Any suggestions?

See if iMovie, will allow you to import, your video footage.
If not, it might be your firewire cable. They do go bad.
Also, does your mac allow firewire 400 and or 800?
Newer ones no longer use firewire, but thunderboldt, which you can get adapert,
for your firewire cable. You can check out Apples web site for those cables, or electronics
store, near were you live.
I have had both firewire 400 & 800 cables go bad on me. I've used the HV30 & HV40.
I've never had or heard of the fw connector on the camera going bad. If it did, you would have to send it back to Canon for repair.

How to change recon.account directly in Table with out changing customizing

Hi Gurus,
I want to change Customer reconciliation account but this is not possible any more due to display option for reconciliation account in customizing.
I know I can change customizing and then change the reconciliation account, but there is a better way doing this.
We can change this directly in the table without changing customizing, but I don't know how to do this. Does any one know how to change directly in the table?
Many thanks in advance

Hi there,
The steps that you should take include:
1. go to SE16
2. put knb1
3. on the field selection input the customer you want to edit
4. Execute
5. type to the transaction field /h and press Enter
6. double click to the customer line item you want to change the recon
7. this will navigate you to the debug environment
8. on the debug environment press find/search button -or- CTRL+F to find a keyword code
9. you should see if code = 'SHOW'.
10. now please double click on the word "code" to set the Breakpoint
11. Press F7
12. you will see the program routine will stop at if code = 'SHOW'.
13. Double click on the word 'code'
14. 'code' will appear on the righ hand side with value = 'SHOW'
15. change the value of 'SHOW' to 'EDIT' by double clicking the Edit icon (pencil) and replacing the value of SHOW to EDIT
16. press Enter
17. press F8
18. you can now change the recon field
19. Press SAVE button
20. Double click 2x (or more) on the STOP sign, until your breakpoint is gone
21. press F8 and you should see the message of "Database Record successfully created"
Good luck!
Regards,
Fausto
Edited by: Fausto Jahja on Jul 21, 2009 5:26 PM
Edited by: Fausto Jahja on Jul 21, 2009 5:50 PM

IIs there any way of loading in a MM54C221J component into multisim with out having to use the component wizard?

Im trying to use a MM54C221J multivibrator in multisim, but it's not in the library.
Does anyone know if I can get hold of one with having to use the component wizard?
Many thanks

Hello GFear,
There are several sources for components that aren't native to multisim.
You can directly contact the manufacturer of the component should they have the multisim model available.
You can also search the web incase another user has created the component.
I have searched for the MM54C221J and have not found one available online.
If you are having trouble using the Component Wizard here is a useful link that breaks down each of the steps.
To create a component you will need a spice model of the component which you should be able to acquire from the manufacture.
http://zone.ni.com/devzone/cda/tut/p/id/3173
I hope this helps.
Regards,
Philip
Applications Engineer
National Instruments
UK Branch
===If this fixes your problem, mark as solution!===

Missing time, so unable to log into system with out changing time.

My issue is missing time. I have a lab with about 20 mac minis on the network for students to log in.
Some days the date and time are off by 6 hours so this prevents users form being able to log in.
We can log in as admin and change the time and date we can log in again.
Has anyone else had this issue where the time is behind about 6 hours?
I dont think it is a battery issue since the day is only behind and reverted back to orginal born on date.
Any assistance would be appricated.
Thanks,

Thanks for the info I will try chaning out the battery on a system and see if that works. Chaning out battery on these things is time comsuming and not an easy thing to do.
I just never seen this type of behavior before on any computer. I seen when batteries die and that will cause issues but not like this.
I will get back to you to award points if this does resolve the issue.
Thanks again for the info a brody.

Record video directly into imovie with external microphone?

Here's what I am trying to, and I am just wondering if it is possible.
I like recording video covers/songs to put up on youtube. i don't have a video camera that takes good video AND sound, and the video quality provided by recording in imovie through the isight is perfectly fine. however, i would like better sound quality than i get with the internal microphone.
i own an mx audio pro system which allows me to connect external microphones to my computer through usb for higher quality recording (i've used it for garageband).
my question is whether i can simultaneously use the isight and external microphone when recording in imovie, and how i would do that??
thanks!

Click System Preferences/Sound/Input and select your USB mic.
I know this works for voiceovers, but it should work for iSight as well.

BI Loading to Cube Manually with out creating Indexes.

BW 3.5
I have a process chain schedules overnight which loads data from the InfoCubes from the ODS after loading to the staging and transformation layer
The data loaded into the InfoCube is scheduled in the process chain as
delete Index > delete contents of the cube> Load Data to the Cube --> Create Index.
Tha above process chain load to cube normally takes 5 - 6 hrs.
The only concern I have is at times if the process chain fails at the staging layer and transformation layer then I have to rectify the same manually.
After rectifying the error, now I have to load the data to the Cube.
I have only left with couple of hours say 2-3 hrs to complete the process chain of the load to the cube because of business hours.
Kindly let me know in the above case where I have short of time to load data to the cube via process chain
can I manually delete the contents of the cube and load the data to the cube. Here I will not be deleting the existing index(s) and create Index(s) after loading to the Cube because creation of Index normally takes a long time which I can avoid where I am short of time.
Can I do the above at times and what are the impacts
If the load to the InfoCube schedules via process chain the other normal working days. Is it going to fail or it will go through
Also deleting contents of the cubes deletes the indexes.
Thanks
Note: As far I understand that Index are created to improve the performance at loading and query performance level.
your input will be appreciated.

Hi Pawan,
Please find below my views in bold
BW 3.5
I have a process chain schedules overnight which loads data to the InfoCubes from the ODS after loading to the staging and transformation layer
The data loaded into the InfoCube is scheduled in the process chain as
delete Index > delete contents of the cube> Load Data to the Cube --> Create Index.
I assume you are deleting the entire contents of the cube. If this is the normal pattern of loads to this cube and if there are no other loads to this cube you may consider configuring a setting in the infocube which " Delete InfoCube indexes before each data load and then refresh" .This setting you would find in Performance tab in create index batch option. Read F1 help of the checkbox. It will provide with more info.
Tha above process chain load to cube normally takes 5 - 6 hrs.
The only concern I have is at times if the process chain fails at the staging layer and transformation layer then I have to rectify the same manually.
After rectifying the error, now I have to load the data to the Cube.
I have only left with couple of hours say 2-3 hrs to complete the process chain of the load to the cube because of business hours.
Kindly let me know in the above case where I have short of time to load data to the cube via process chain
can I manually delete the contents of the cube and load the data to the cube. YES, you can Here I will not be deleting the existing index(s) and create Index(s) after loading to the Cube because creation of Index normally takes a long time which I can avoid where I am short of time.
Can I do the above at times and what are the impacts Impacts :Lower query performance and loading performance as you mentioned
If the load to the InfoCube schedules via process chain the other normal working days. Is it going to fail or it will go through
I dont probably understand the question above, but i assume you mean, that if you did a manual load will there be a failure next day. - THERE WOULDNT
Also deleting contents of the cubes deletes the indexes.
YES it does
Thanks
Pavan - You can skip creating indices, but you will have slower query performance. However if you have no further loads to this cube, you could create your indices during business hours as well. I think, the building of indices demands a lock on the cube and since you are not loading anything else u should b able to furnish it. Lastly, is there no way you can remodel this cube and flow...do you really need to have full data loads?
Note: As far I understand that Index are created to improve the performance at loading and query performance level. TRUE
your input will be appreciated.
Hope it helps,
Regards,
Sunmit.

To receive material directly into warehouse with out creating TO

Similar Messages

Maybe you are looking for