To Reclaim space in backend server for oracle ebs

We need to reclaim some space in backend servers for the Oracle Ebs application in Non Prod servers.For this we are already deleting fnd_lobs data while cloning from production to non production.
What else can be done so that we can reclaim much space in the backend.
Kindly assist.

989798 wrote:
We need to reclaim some space in backend servers for the Oracle Ebs application in Non Prod servers.For this we are already deleting fnd_lobs data while cloning from production to non production.
What else can be done so that we can reclaim much space in the backend.
Kindly assist.https://forums.oracle.com/forums/search.jspa?threadID=&q=Purging+AND+Strategy&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Similar Messages

How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

Hi Every Body,
1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
-- I have download all files from e-delivery and check the md5 and all files are OK.
I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
2- Was that a problem ?
-- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
thanks in advance.

Hi,
Most of the instructions you have mentioned , already was configured.
except for the tmp and temp directories.
And even I changed them from System Properties >> Advanced >> Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
I attach the conf_VIS.txt file because I thought it may help.
http://www.4shared.com/document/1bS6aio5/conf_VIS.html
Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

Version of Application Server for Oracle E-Business suite 12.0.4 ?

Hi ,
I want to know the complete version of Application Server for Oracle E-Business suite 12.0.4 . The installation guide/ rapid install mention this :
A) Oracle database 10.2.0.3
B)Applications Server : 10.1.3 oc4j
C) Application Server : 10.1.2.2 (forms)
D) E-business Applications
But I want to know the complete version for 10.1.3 .Is it 10.1.3-3 or is it 10.1.3.4 or both ? This will help us ind determining the patches which can be applied ?
Thanks.
Best Regards,
brinda

Hi,
Please refer to:
Note: 468311.1 - Script to find Apache, Java, JRE, Forms version for Oracle E-Business Suite R12
Note: 454811.1 - Upgrading to the Latest OracleAS 10g 10.1.3.x Patch Set in Oracle E-Business Suite Release 12
Regards,
Hussein

Memory and No. of Processor calculation for Oracle EBS R11 and R12

Can some one please tell me …. How to calculate required Memory and No. of Processors for Oracle EBS R11 and R12.
For example we have 50 Concurrent users and 100 named (i.e. the users which are doing only Data entry.), so how to How to calculate required Memory and No. of Processors
Please guide me on the same.
Thanks,

Please refer to the following links, it may be helpful:
Oracle Applications Benchmark White Papers
http://www.oracle.com/apps_benchmark/html/white-papers-e-business.html
Oracle Applications Standard Benchmark White Papers
http://www.oracle.com/apps_benchmark/html/white-papers.html
Hardware requirements for Oracle APPS
Hardware requirements for Oracle APPS

HRMS Analytics configuration for Oracle EBS

Hi ,
I have to configure HRMS Analytics for Oracle EBS(Referring Configuration Guide for OBIA 7.9.6.3) , I am new to OBIA :
I just started working domain Values (csv files), I have few queries for the same:
1. Is is necessary to Use the query mentioned in the OBIA Setup guide , to get the Domain Values. Can we use different query to extract the Domain Values ?
What is the effect if query is changed ?
2. Some csv are for 11i instance ,so does it mean , it is not required to configure those csv files for R12 ?
Any help in this regard will be highly appreciated.
Thanks,
Razi

Here are the answers to the questions:
1. Is is necessary to Use the query mentioned in the OBIA Setup guide , to get the Domain Values. Can we use different query to extract the Domain Values ?
What is the effect if query is changed ?
A: Not necessairily. The query is there to help you gather the relevant data but this is a functional exercise. If a HR Functional person on your team can identify the relevant domains, events, etc, then you can populate it manually. The goal is to get the relevant EBS domain values and map to the BI requirements. The query is a fast way to get the list of the existing values from the EBS DB.
2. Some csv are for 11i instance ,so does it mean , it is not required to configure those csv files for R12 ?
A: If the COnfig Guide specifically has a section for R12 versus 11..then you need to follow for the version you are on. However, there are general "EBS" configurations that you need to do for both versions. Rule of thumb, if it doesnt specific the version, then it needs to be done for both.
If helpful, pls mark correct or helpful

How to find my SOA version for Oracle EBS?

How to find my SOA version for Oracle EBS?
Thanks!
Wei

please see
SOA 11g Integration Support for Oracle E-Business Suite (Doc ID 1278194.1)
AppsMaSti
Sharing Is Caring

Certification AMP for Oracle EBS on Grid Control v10.2.0.5

Hi,
Our company is currently using Grid Control v10.2.0.2 and different agent versions on 32-bits linux servers.
We are using this version for about 3 years and now we want to start with a fresh Grid Contol enviroment so started a new project.
The goal of the project is to use the latest version of Grid Control and 64bits linux servers, but also to monitor our EBS enviroments.
Is Oracle currently working to certify AMP(3.0) for Oracle Ebs for Grid Control 10.2.0.5 and agents version 10.2.0.5 on 64-bits linux servers??
I searched OTN and metalink but couldnt find anything about it.
greetings

Hi,
You can check this Doc :Installing Enterprise Manager Grid Control
Section. Installing Enterprise Manager Grid Control Using an Existing Database its included RAC database also.
HTH

WebSphere Adpater for Oracle EBS

Is anyone familiar with WebSphere Adapter for Oracle?
I am trying to use the WebSphere Adapter for Oracle EBS to create a Cash Receipt into Oracle EBS v12 and I am getting the error "ORG ID is invalid", even though I am specifying a valid Org Id. I have tried also not specifing the Ord Id parameter and it says "Org id is required". My EBS is hosting 3 Organisations. I wonder whether something else is required.
I am using the API ar_receipt_api_pub.create_cash
Has anyone used this adapter? Any tips?

Duplicate post -- API HZ_CUST_ACCOUNT_SITE_V2PUB.CREATE_CUST_ACCT_SITE fails in R12

How to choose a right server for Oracle Database!

Hi all,
Is there any formular that allows me to find the appropriate server configuration for Oracle database 11g?
Please help!
Thank you all.
Dan.
Edited by: Dan on 01:45 06-01-2013

Simply put ... no.
Determining the correct server is a dance between hardware vendors (one point of input to be treated with general distrust), internal expertise and experience working with similar systems, and most importantly understanding the behaviour of what you are building.
Here are some sample questions to start the ball rolling.
1. What operating system expertise does your organization have?
2. What operating system expertise is readily available in the community from which you hire applicants?
3. What type of application?
4. What are up-time expectations?
5. Requirements for high availability?
6. Requirements for time to perform a full recovery?
7. Requirements for security?
8. Storage footprint (dictates internal storage versus SAN, NAS, or ZFS)
9. Anticipated growth (3-7 years)
Everyone wants to sell you CPU clock-ticks, more RAM, more IOPS, etc. But the first thing you need to understand is the capabilities you require that are generic: Required of any solution. Only when you have a clear understanding of these factors are you ready to discuss whether the solution is a pizza box or an ODA ... an Exadata or an IBM System Z.
Far too often I find people purchasing RAM they don't need with CPU speeds that exceed the ability of their network infrastructure to move the data so pay special attention when you are ready to make your purchase to engineered systems like the ODA.

HTTP Server Patch - 4393827 for Oracle EBS 11i

Hi,
Our env is Oracle EBS 11i (11.5.10) + CU2 +ATG RUP6. We are currently on 9.2.0.8.0
I am currently applying Minimum Baseline Patches for extended support - +Patch Requirements for Extended Support of Oracle E-Business Suite Release 11.5.10 [ID 883202.1]+.
For the HTTP Server Patch - 4393827 do I need to apply patches for all the below components? It prompted me 4 times to apply the patch for each component.
OHS_1.0.2.2 component
MODPLSQL component
Webcache_1.0.2.2
DB_8.1.7.4
Rgds,
Thiru

Thanks.
I applied HTTP Server Patch - 4393827 in my upgraded instance 11.5.10 CU2ATG RUP6.
Now the Apache version is:
Server version: Oracle HTTP Server Powered by Apache/1.3.19 (Win32)
Server built: Jun 14 2005 15:26:57 (iAS 1.0.2.2.2 rollup 5)
While applying HTTP Server Patch - 4393827, I was prompted to enter Y or N to apply patch for the following components individually. I had the option to enter N also.
OHS_1.0.2.2 component
MODPLSQL component
Webcache_1.0.2.2 component
DB_8.1.7.4 component
I entered Y(Yes) for all the components and the patching was successful for all the components.
I am doubtful about the DB_8.1.7.4 component patch. Should I say Y to this also?. Since my Instance is on 9.2.0.8.0 is it required to apply this component (DB_8.1.7.4 component) also?
Rgds,
Thiru

Need caring server for Oracle XE

My apologies if this is an inappropriate question or the wrong place to ask it.
I'm a small company that would like to showcase some APEX applications and need a secure and accessible server to be able to do this.
Does anyone have any experience with companies that provide leased dedicated servers that allow installing Oracle XE (or proper 10g) on it ? I've tried one and they were not very helpful. Their server was very instable and sometimes refused to reboot even when no changes had taken place yet ! I'm looking for a minimal spec'ed Linux server that will allow me to (safely) install Oracle. Speed and bandwidth are not critical but should not be too restrictive either. I'm based in the UK so this may restrict the choice of providers. Before anybody asks, I have considered hosting my own web/database server from home but my broadband connection is only 512Kbps here and not fast enough to serve my customers.
Thanks in advance.
Ruud Mantingh

winner wrote:
Hello team,
We need a raccheck script to do a health check for oracle rac on HP-UX host, can you pls help,or the below tool not supported on hp-ux?
RACcheck - RAC Configuration Audit Tool [ID 1268927.1]
Regards....!At this time, the tool is supported on the following UNIX platforms:
- Intel Linux* (Enterprise Linux, RedHat and SuSE 9 & SuSE 10)
- Oracle Solaris* SPARC
- Oracle Solaris x86-64
- AIX (requires bash shell installed)
So no hp-ux

Ntp Server for Oracle 11gr2 (oracle clusterware) on HP-UX

we are planning to configure a ntp server on Windows 2003 server for our Oracle 11gr2 RAC (2 nodes) on HP-UX but we have some issues to be clear. Following are the details for our environment.
RAC : Oracle Clusterware (2 nodes)
Database : 11gr2
OS: HP-UX B11
Hardware: HP Intergrity Blade Servers BL860c i2
ntp server : HP Proliant
if our ntp server fails how the both nodes will manage the time?

if our ntp server fails how the both nodes will manage the time?Use NTP insure that all cluster nodes must be synchronized to the same time ,in 9i , 10g and 11gR2 Oracle Clusterware includes the Cluster Time Synchronization Service (CTSS) . On startup Clusterware checks for a NTP configuration, if found, CTSS goes into Observer mode. This means it will monitor the clock synchronization and report in the Oracle Clusterware alert log if it finds a problem. If it does not find a NTP configuration, CTSS will be active .
Check
http://docs.oracle.com/cd/E26996_01/E18548/html/manager_ntpconfig.html
http://docs.oracle.com/cd/E23824_01/html/821-1454/time-20.html

Cannot connect HTTP Server for oracle 9i database

I tried starting the HTTP Sever for oracle 9i, but i keep getting this error:
Could not start the OracleOraHome92HTTPServer service on Local Computer.
The service did not return an error. This could be an internal Windows error or an intrenal service error.
If the problem persists, contact your system administrator.
Any thoughts??
Also I get an ORA- 12535 TNS:timed- out error when I try accessing oracle 9i to create a new database...
Help....
Thanks in advance

Hi Jim,
the command is 'apachectl start'. You find the executable apachectl under $ORACLE_HOME/Apache/Apache/bin .
Best regards
Werner

Oracle ILM assistant for Oracle EBS R12.1 application with 11.1.0.7 DB

Oracle ILM through its ILM Agent, which is a database component provides option for data archiving.
Need to know how ILM agent can be used against Oracle EBS R12 and the options available:
a. Does ILM assistant map to industry Compliance requirements and can we add or modify based on additional Client requirements
b. Is this configured for all components and are the business rules (default) taken care in terms of archiving related data, if not what are the options available
c. What are the options to archive data
i. On Same and archive database
ii. Other RDBMS (mysql, or open source database)
d. Access to archived data
i. Is archive data available from the existing application or only from backend database
ii. Does ILM assistant provide options to access archived data (same Oracle RDBMS or heterogeneous database)
e. Retention options
i. Does ILM assistant provide multi tier retention options for archived data for different range (# of years)
Edited by: user9031099 on May 9, 2013 11:00 PM
Any update on my query please...?

Limits the Preferred Read-Write Tablespace to only 1 where as in Oracle EBS we would require multiple tablespaces to be Preferred Read Write. Can we extend the functionality of ILM assistant to have multiple Read-Write tablespaces...?

Login Button for Oracle EBS 12.1.3

We have an environment of Oracle EBS 12.1.3 with OracleAS SSO Server 10g. Now with this configurations, if the login page of Oracle EBS is accessed directly, the login butting gives a dynamic value by generating a random number with it, <button title="Login" class="x7m" id="SubmitButton" style="background-image: url(/OA_HTML/cabo/images/swan/btn-bg1.gif);" onclick="submitForm('DefaultFormName',1,{'_FORM_SUBMIT_BUTTON':'SubmitButtong3weV873'});return false" type="submit">.
However, on a different installation of Oracle EBS 12.1.3 without the OracleAS SSO Server, the login button does not present this dynamic value. We did some troubleshooting and found out that this value of the login button changes because of the OracleAS SSO server. Now although we have removed and de-registered the Oracle EBS from OracleAS SSO server, the value of the login button is still dynamic.
Now need help here to know if there is any setting of the OracleAS SSO Server still present which has the Oracle EBS perform this way. How can I ensure a complete removal of OracleAS SSO server.
Secondly, if anybody might be aware of the cause of the dynamic value of the login button only in this installation.
Need some urgent help here.

Yes, based the the value of the dynamic value of the login button
This should not be the reason of suspecting that SSO is not completely deregistered from the application.
Please run the SSO diagnostic script(s) to verify the above.
R12.0.6+ : Oracle Application Object Library Is SSO Mode On Health Check Test (Doc ID 732285.1)
Diagnostic Test Catalog for 12.1.3 (Doc ID 1083807.1) -- SSO Setup Tests
Thanks,
Hussein

To Reclaim space in backend server for oracle ebs

Similar Messages

Maybe you are looking for