To record voice with a few second pre roll time

When I record my voice, I want to hear pre-recorded voice a few second just like voice over tool in FCP.
Has Soundtrack pro the fuction?

No there isn't preroll.

Similar Messages

  • Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

    Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

    Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
    Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

  • Can i record voice with garageband?

    Can i record voice with garageband?

    Hi,
    I am a Garage Band dunce (first time user). I’ve imported a guitar track as track 1.
    I launched a “new basic track” with no effects for the vocal track, but cannot get any vocals to show up on the meter before recording.
    I can click on track one (my guitar track) and I can see the meter move when speaking into the mic, but when I click on track two, I get nothing from the mic.
    I’m sure the answer is obvious, but I don’t see it. Any tips?
    Thanks,
    Terry

  • I have purchased a new laptop thats running windows 7  and i am running mozilla firefox and itunes will download to 99% with a few seconds to go then doesnt finish downloading i have tried everything to download itunes . any suggestions

    I purchased a new laptop with windows 7 and i am using mozilla firefox as browser and i cannot get itunes to download at all. it will download to 99% with a few seconds remaining but will not complete the download. Any suggestions on what to try next as i have tried turning off firewalls etc. I have wiped the computer and reloaded everything again but still i cannot get itunes to load 

    I purchased a new laptop with windows 7 and i am using mozilla firefox as browser and i cannot get itunes to download at all. it will download to 99% with a few seconds remaining but will not complete the download. Any suggestions on what to try next as i have tried turning off firewalls etc. I have wiped the computer and reloaded everything again but still i cannot get itunes to load 

  • I'm trying to play a movie but my iPad only plays for a few seconds at a time...how do I change this

    I'M trying to view a movie on my iPad but it wont play but a few seconds at a time
    How do I make it play the movie without stopping all the time

    Movie from where?
    Is it downloaded on the device or streaming over the Internet?

  • How do you get rid of 'empty' pre-roll time in logic pro 9?

    how do you get rid of the pre-roll time in logic pro 9?  
    My project's start time is 8-bars before any material, or tempos, or anything...  
    Can't move the start time back to ")" (zero)    STUCK!!  at -8
    The song now has 20 seconds of dead air time in a pre-roll.
    None of these worked or revealed anything...
    -tried making a new copy of song
    -looked into every track's file information looking for a spurious entry
    -tried deleting the time/space

    Hi
    Check for any Track Automation nodes in the "preroll'.
    CCT
    Edit
    You should note that generally negative (or zero) project start numbers should be avoided at all cost: there are many peculiar behaviour problems associated with them.

  • Record voice with microphone into local file.

    I would like to build a small application in AS3 adobe Air so that my users can record their voice with microphone.
    I know there is a Microphone class but I don't know if AS3  adobe Air allows to record the voice into a file locally.
    Is that possible to do so with AS3 adobe Air?
    Do I absolutely need Flash Media Server or is there a way around?

    The Microphone class doesn't allow access to the bytes that are being streamed.  Join the cause to open the access! http://www.getmicrophone.com/
    Although, you can accomplish this by using a streaming server I believe.  I've not yet experiemented with just audio recording, but I have with video/audio recording and that works just fine.

  • Audio recording stops after a few seconds on iPad 1. Any suggestions?, Audio recording stops after a few seconds on iPad 1. Any suggestions?

    On an IPad 1 even after a full restart, and only application running, I'm finding that Audio recoding stops after a few seconds. The duration seems to be fairly random between 5 seconds to 25 seconds. Creating other tracks seems OK.
    Any ideas would be appreciated.

    I've seen this issue in the past.  I think it is connected to the operating system itself.  I say this because I reinstalled the os using itunes and then restored a backup.  Then garageband started behaving again.  Then the issue came back - after I did an os update.  So I'd try reverting back to a fresh version of the latest os, and then restoring your apps using a backup.
    Hope it helps
    @zorin

  • Podcast skipping a few seconds at a time

    When playing Tiesto's Clublife Podcast (I don't really play much else), the Podcast starts out OK with a small static-y type noise in the backround. As the podcast progresses (just checked in this instance ~12min in) it starts to rapidly play 3-4 seconds as if in fast forward, then stop for a second or two, then rapidly play a few seconds again repeatedly.
    If I stop and replay the podcast from the beginning sometimes it plays fine, other times it continues to play in fast forward. If I hit pause and then play it still plays up.
    Is this an easy answer? Or am I going to have to monitor the problem and get more info?

    Hey Sally,
    We have an article that outlines a few troubleshooting steps if your Mac is running a bit slowly.
    OS X Lion: If your Mac runs slowly
    http://support.apple.com/kb/PH3915
    If you find your Mac is running slowly, check any open applications to make sure they’re compatible with your computer. Or you may need to increase your hard disk space or repair your hard disk.
    An application you’re using may require more memory than your computer has. To see how much memory your computer has, choose Apple menu > About This Mac. See the documentation that came with the application to find out what it requires. To find out how to increase your computer’s memory, see the documentation that came with it.
    Quit any application that isn’t compatible with your computer. For example, an application may require a different processor or graphics card. See the documentation that came with the application to find out what it requires.
    To see what processor your computer has, choose Apple menu > About This Mac.
    To see what graphics card your computer has, choose Apple menu > About This Mac, click More Info, and then click Displays.
    There might not be enough free disk space on your computer’s startup disk. To make disk space available, you can move files to another disk and then delete files you no longer need on the startup disk.Increase disk space
    Quit any applications you’re not using.
    If none of these suggestions work, you may need to repair your computer’s disk in Disk Utility.Repair a disk
    Hope this helps,
    David

  • Macbook Air only connects to the internet for a few seconds at a time.

    My 2013 Macbook Air (10.8.5) will only connect to the internet for a few seconds. It recognizes the wifi, but will just timeout when trying to access a website. If I turn Wifi off and then back on, it will work for another few seconds, only for the same issue to come up. I've tried EVERY SINGLE troubleshooting tip I could find and nothing works. I've renewed DCHP, rebooted my Mac, rebooted the router, network diagnostics, everything. I've scanned with Sophos multiple times and nothing has been detected. My 2007 MacBook Pro works just fine on the network as well as my roommates Macbook and my Apple TV. I have no clue how to fix it and am praying someone knows what to do. Please help!

    Start by getting rid of "Sophos," which is worse than useless.
    Remove the Sophos product by following the instructions on this page, and also this one, if applicable. If you have a different version, the procedure may be different.
    Back up all data before making any changes.

  • Airport Extreme drops connection for a few seconds at a time

    My airport extreme seems to drop its connection for about 5 seconds at a time and then is back up.  It does it every 10-15 minutes or so.  I am not really sure why it is doing this because it has just started happening recently and worked fine for months and months.  I need help because I dont know much about networking.

    When you inserted your AirPort Extreme (It was an AirPort Extreme card, right?) card in your G5, did you attach the antenna cable AND the external "T" antenna?

  • Unwanted Noise Recording Voice with GarageBand

    Hi everyone, I'm using podcast factory as mic for my podcasts, and GarageBand to record them.
    The trouble is, that even shifting a little in my chair is picked up by the mic, and I daren't type on the keyboard or really move at all for fear of putting really heavy noise on the track.
    Im not sure what to do about this, as my voice sounds great apart from that!
    Anyone help me out? thx..

    Hello Nick,
    Along with the excellent advice already given, here's what I would suggest: If you're using a desktop mic stand, avoid putting it on the same table or desk as your computer. You'd be surprised at how much rumble and hum the computer is creating. Also, use a foam wind cover over the mic.
    If you don't have access to a "dead" room get a floor stand for your mic and record in a clothes closet. Yeah, I know it sounds stupid but I tried and got better results than sitting in my den. Rooms with hardwood floors, sliding glass doors and bare walls will affect the quality of your sound.
    I'll mention one other thing that worked for me until I could afford better equipment; the Logitech 350 headset mic. It's USB and does a pretty good job of isolating your voice while you record.
    Hope this helps. Good luck!

  • Just want to record voice with my built in iMac microphone...guidance?

    evental goal is to use audo voice track for FCE, but want to lay down an audio track for a placeholder to measure length (time) and make some queues... any suggestions? Garage Band or something else.
    thanks
    -Russ

    Ok i have recorded a little sample with both Audicity and with QT. 
    it look like either will serve my 3 purposes 1) see how long copy is. 2) have something to put down in FCE  and 3 send to my VO guy so he has a "go-by"

  • Will not allow me to capture more than a few seconds at a time, with correct settings?

    I'm trying to edit a wedding video and the program will only import a few short seconds before stopping import and creating another clip. I'm using a 15 inch 2011 macbook pro, and a canon XL2

    Cannot start DV or HDV video capture in Premiere Pro CS4 or later 

  • Macbook Pro Retina blacks out for a few seconds at a time

    I have a new (2-3 weeks) Macbook Pro 13" retina display. A few times since I've had it, the screen went black for about 10 seconds and then came back. Any idea what's up with this? Is this something to return the machine for, or is a software issue? Has anyone else had this happen?
    Thanks!
    Stacey

    You are still under warranty.  Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty. 
    #1 - You have 14 days from the date of purchase to return your computer with no questions asked.
    #2 - You have 90 days of FREE phone tech support.
    #3 - You have the standard one year Apple warranty.
    #4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years.   You can obtain AppleCare anytime up to the first year of the purchase of your computer.
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

Maybe you are looking for

  • How to keep file name in print queue when printing crystal report

    We are using VB .Net 2003 + Crystal Report 2008 SP2 up to Fix Pack 2.6 When the VB program spools crystal report files to print queue, the print queue only shows "Crystal Report" for each document.  How to keep the original file name?  In the past wh

  • Bridge CS6 (64bit) becomes unresponsive

    Bridge CS6 becomes untresponsive for general operation keys. Lasts for a minute. CS5 is OK. Waht do I do?

  • Execute stored procedure from batch file

    Hi, can someone helpme hoe to run my stored procedure from a bacth file. I need it urgently. Can some one help Thanks, Sri

  • Mac OS x lion clean install problems

    While trying to do a clean install of OS X lion, my macbook pro is stuck at "downloading additioal components required to install mac os x lion. though i have wifi access, there is no bandwidth usage in the whole process.. it starts with 22 minutes,

  • Internet Explorer 10 crashing with PDF

    Good morning from Ireland, I recently installed Internet Explorer 10 and now it crashes when I try to open a PDF file Hope you can help..CB