To recover a database with old and new datafiles.

Hi;
Please Give a Solution for the following problem.
First I shutdown the databae.
Copy all the redolog,control file and Datafile except one.
One datafile i miss at the time of copy.
Then I start the database and do some transactions.
At that time my system tablespace has been corrupted.
So i copy the old backup and overwrite with the actul file.
So one file backup is not there, that i forgot to take.
At the time of opening the database it shows that datafile version is higher than the controlfile.
Now what i did is came to mount stage and type the following command.
ALTER DATABASE DATAFILE <FILENAME> OFFLINE DROP;
After that i open the database.
Now the problem is that missing file contain very important data.
Is it possible to recover the data?
Please give me an immediate solution.

Is the database running in archive log mode? Do you have any export dump files for the data in question?

Similar Messages

New camera dies Rebel t5i with old and new battery

Camera is 12 months old and the original battery appears as if not holding a charge. After charging, the camera will come on and die when pressing the shutter button to take a picture. I purchased a new battery, charged it and the same happens again. Seems that maybe the old battery may not be dead after all. Could this be the charger or is this a camera issue. If a camera issue where do I go to get this looked at. Bought camera at best buy. You think this caliper camera would last longer than a year???

Are there any third party components involved in charging or using your camera? Did you, for example, add a 3rd party battery grip?
I ask, because just occcasionally we'll get this sort of question where the camera fails to perform as expected but the person seeking help didn't mention the 3rd party component. Once we find out about it and eliminate it from the test... suddenly the camera works fine again.
Canon factory batteries tend to last many years assuming you are using the original Canon charger (I do NOT like to use "fast" chargers as they stress the battery trying to charge it in a hurry and shorten it's life.)
When you insert a freshly charged battery and power it up... does the rear LCD screen come to life and, if so, do you see the battery charge level indicator showing that the battery is full?
This may be a problem with the camera itself and/or with one of it's cut-off switches. There are two micr-switches will cause the camera to immediately power down if they are not engaged. One is on the battery compartment door. The other is on the memory card door. If you power up the camera then VERY SLOWLY open these doors, you should find that you can open them about 1mm and then the camera will power off. If you barely touch the door and the camera shuts down, then it may be that you have a bad switch. Make sure the two doors are undamaged and able to close easily without any obstructions (if they aren't fully closed, it would make sense that your camera spontaneously shuts down.)
You may need to contact Canon service for help as there's no "setting" that would make the camera do this. The T5i is a good camera, but it's just possible you have a problem with yours -- it happens and it's not an indicator of low quality. I bought a new car that had a water pump failure within the first 5000 miles (that was a shock) even though everybody else with the same model car didn't have a problem with their water pump. It happens. Could they increase quality control to the point that it'd be very hard to get a car released with a bad water pump? Well... they could improve build standards, testing standards, and inspection standards... that would REALLY drive up the price tag of that car... and just occasionally they'd still get a bad one anyway. You can never get quality to 100% for any product.
Tim Campbell
5D II, 5D III, 60Da

Problems with Old and New Appraisals (switch HAP00 / REPLA)

Hello Experts,
I'm working on a HCM Global implementation and my country is joining now, and there are others countries that have already been there since 2002.
Through of switch HAP00/REPLA (transaction OOHAP_SETTINGS_PA), it is possible enable the use of Appraisal Systems subcomponent (Old Version) or Objective Setting and Appraisals subcomponent (New Version).
The others countries are using the Old version and we need use the New version.
When I activated of switch to flag u201CXu201D and after I tried create appraisals to employees through transactions APPCREATE or PHAP_PREPARE_PA, I could see only the new appraisals forms templates that Iu2019ve created through transaction HAP_CATALOG_PA and I could not see the old ones that I created through transaction OOB1.
After this problem I have tested activation of switch HAP00/REPLA and the screen in infotype 24, tab Appraisals where appraisee changed after the switch was activated, in other hands all the Appraisals on tab u201CAppraisals where appraiseeu201D disappeared and the columns are totally different comparing to old version.
My question is how can I activate (flag X) the switch HAP00/REPLA and without losing the existing Appraisals on TAB u201CAppraisals where appraiseeu201D in Infotype 0024?
Thanks in advance

Hi Lima,
The old appraisal system only supports appraisal templates with object type BA where as the new template uses object type VA. It is therefore you cannot view both of the appraisals in one tab 'Appraisals where Appraisee' or 'Appraisals where Appraiser'.
I suggest either use new or the old appraisal because by the time you run APPCREATE report for creating appraisals, the SAP systems queries the table OOHAP_SETTINGS_PA to identify which appraisal system is used. Based on the selection made in this table, the system opts for the settings.
I've went through your issue but cannot find the solution to it. It seems to be impossible.
Thanks,
Irfan Malik
SAP HR Consultant
SIEMENS Engineering Co. Ltd Pakistan

BB DESKTOP SOFTWARE STOPPED WORKING WITH OLD AND NEW PHONE

Im running 10.6.8 on my Macbook pro. The problem started with previous Mac already. The BDS starts up, connects with phone but can not backup, restore or update phone. Get the following error msg. "DBS failed, device could not be backed up. This started on my previous mac already, older version of software.
I uninstalled, re-isntalled the software many times and in the end thought it must be by phone - BB9700. Now on new phone BB9900 and same problem. Tried again re-installing the software, dumping all prefs etc - no luck. i installed the software on a different Mac at the office running same software and the phone backed-up, no problem.
can anyone help. what can i try.

I guess that you are using the latest software available for BDS.
From what I see there, this could indeed come from a corrupt file on your MB Pro.
I would suggest to uninstall completely the BDS software and to be sure that all related files have been deleted too. This is probably the most "challenging part". If I remember correctly there is an uninstaller provided with the disk image, so use this one and then search for any other BDS file using Spotlight or the shareware "AppZapper" which is used to delete all files related to a specific software at once!
If you say that it is working perfectly on another computer, the phone is not the cause of the problem logically.
A good idea is also to repair the permissions on your Mac starting up from the original DVD and using the disk utility software. This will help your Mac anyway
Hope this helps.
Please don't forget to mark as "solved" if your question is replied and to "like" a useful reply to your post ;-)

Best Airport Extreme Wireless Radio Mode with Old and New Macs and PC

I'm running Airport Utility 5.3.2 and am running / connecting to the Internet with a new Airport Extreme 802.11n Gigabit Ethernet (the new squared off one) with "Version 7.3.2".
In addition to my new MacBook Black (which has 802.11n, I have two other older Maxs that run 802.11b/g (and also a PC that has 802.11.b/g/n).
Currently, the Airport Extreme's "Wireless" "Radio Mode" is set to
802.11n (802.11b/g compatible)
But, reviewing the Radio Mode menu, I see there are a number of choices that seem "faster" - 802.11n only (2.4 GHz), 802.11n (802.11a compatible) and 802.11n only (5 GHz).
Can I set the Radio Mode to any of these other settings and still have my older Macs (and the PC) connect to the internet using this Airport Extreme? Or, do I have to leave my Airport Extreme Radio Mode set to what appears to be a slower speed 802.11n (802.11b/g compatible) setting to allow others to use this Airport Extreme Base Station?
FWIW, I do have an older Airport 802.11g version 5.7 still connected and set up and the older computers can / could connect through that. However, I was hoping to give that one to a friend for their use elesewhere and wanted to have only one Airport Extreme set up at my house.

"you'll use N+B/G at 2.4 GHZ."
I guess you means that I should continue with my current setting on the Airport Extreme - which is "802.11n (802.11b/g compatible)" - if I want all my computers to access the web via the Extreme. Correct?
I'm too much of a novice to try a "bridge" mode setup.
However, your suggestion (I think) "It would be more reliable and faster speed if you could connect both routers to using ethernet" does give me hope.
My Verizon Fios modem is actually a router. Indeed, I have my TiVo box connected to the Fios modem/router.
If I connect BOTH of my Airport Base Stations to the Fios modem/router and then do the following:
(1) set the newer "Extreme" Base Station to "802.11n only (5 GHz)" and
(2) keep the older Base Station (running 802.11g) as is
then my (and others') newer computer(s) with 802.11n can connect at high speed via the Extreme and older computers can still connect using the older Base Station.
Correct?
Message was edited by: JoeS

Creating new database with old database datafile

is it possible to create new database with old datafile
i lost my database ,i have no back up, just i have datafiles,
i want to create new database and want to create tablespaces with old datafiles
pls suggest me right one
tahnk you

SQL> recover database using backup controlfile until cancel;
ORA-00279: change 339559282 generated at 03/09/2008 12:23:01 needed for thread 1
ORA-00289: suggestion : F:\ORA9IAS\RDBMS\ARC01901.001
ORA-00280: change 339559282 for thread 1 is in sequence #1901
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log 'F:\ORA9IAS\RDBMS\ARC01901.001'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: 'F:\ORA9IAS\ORADATA\IASDB\SYSTEM01.DBF'

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck.

How can I find my email in Apple Mail from before my company switched hosting providers? People with Outlook have all of their old and new emails. My old emails have vanished from Apple Mail.

How can I find my email in Apple Mail from before my company switched hosting providers? People with Outlook in my company have all of their old and new emails. My old emails have vanished from my Apple Mailbox on my macbook and other Apple devices. I do not have my mail backed up in time machine recently nor did I export my emailbox recently. Any ideas?

Try looking in your User folder.
Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I have to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

Solaris Login with both Old and New Passwords!!!!!

After password expiration in Solaris we discovered that users can do o/s login into the system both with old and the new password (!!!). I read something about LDAP and Kerberos password synchronization, it is possible???
Thanks
Christopher.

SolarisSAinPA thanks for your helpfully answer...but before a couple of hours department IT of company where I work answered in my question:
......Solaris 8 and 9 use the old unix cryptographic algorithm, which can encrypt a string of "at most" 8 characters (if you enter a 10-character string, the OS accepts it and then silently throws away the last 2)......
Thanks
Christopher.

When I installed CC 2014, I ended up with the old and new applications.

When I installed CC 2014, I ended up with the old and new applications. When I uninstall the old one, it takes out the new one too. Suggestions?

Hi LeoOfMars,
This is an expected behavior. Please check : http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
If you dont want to use the older version you can uninstall them.
Regards,
Rave

T.code FF7A: how to see old and NEW open items?

Hi All,
I've filled the "Cash Managemeng Group" in the master data of a Customer.
The report Cash Manag.& Forecast doesn't update its old open line Items.
Only the documents successive to the insertion of the "Cash Managemeng Group" in the master data are updated in the report.
Could anyone tell how to obtain all the items (old and new) in the report?
Thanks
Gandalf

There are a couple options depending on the additional details of your situation....
Within t-code FDFD, there is a button labeled Data Setup. This button is intended for use when cash management (CM) is activated for an existing company code and CM needs to be updated with transactions created prior to the activation. It deletes all data in cash management for the Co.Cd. and then builds the CM data for all GL, customer and vendor accounts. There are also options to update CM for other areas (Sales, Procurement, Treasury, etc.)
Also within t-code FDFD, there is a button labeled Correct Data. This button can be used instead of the Data Setup button, if the CM data for a particular area needs to be corrected. This function has the following options: All GL accounts, All GL accounts with open items, All GL accounts w/o open items (non-open item managed accounts), All Customers/Vendors, All Customers, All Vendors.
It's best to run these functions when transactions are not being created on the system.
Regards,
Shannon

Please help me to merge two places.sqlite to get my old and New history at the same time, every time i rename my two places.sqlite to see my old and new history

every time i rename my new places.sqlite to see my old history and come back rename old places.sqlite to see my new history, i tired and i found No Way to merge two places.sqlite :( but it's must be found this way for The PPL to see their old and new history :(
Thank You all in Advance

You can't merge history otherwise then using Sync to store the history and bookmarks of one places.sqlite on the Sync server and then disconnect.<br />
Copy the second places.sqlite file to your Firefox profile folder with Firefox closed.
Then setup Sync once again using that account and merge the content on the Sync server with your computer.
* Merge this device's data with my Sync data

I accidently created a new apple account on my new phone, How do I merge my old and new accounts

I had an old account but had lost access to the email. In frustration I created a new account to use with iTunes on windows. Now history repeats itself and I've a new iPhone 4 that I want to load with data from both old and new accounts. Do I need to just go to the Genius bar next time I'm in town or is there some way to log into each account, back up the data and merge to the new account?

Actually not trying to merge the accounts, but back up the DATA i have stored in those accounts. Once I've pulled the many songs I purchased under the old account I'll burn them to something and delete the old account... and I think I've just answered my own question.
i.e. Don't try to merge anything, just salvage music and other data (contacts, notes)

Error : Old and new exceptions cannot be used at the same time.

HI ALL,
i build a new exception class with message class and i want to replace the
old exception that i had in the method ,what i did is delete the exception from the method
signature and add the exception class .
the problem is that when i try to activate the method i get error :
Old and new exceptions cannot be used at the same time.
CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
      EXPORTING
        alg            = 'MD5'
        data           = iv_iss
      IMPORTING
        hash           = lv_issu
      EXCEPTIONS
        unknown_alg    = 1
        param_error    = 2
        internal_error = 3
        OTHERS         = 4.
    IF sy-subrc <> 0.
      RAISE EXCEPTION TYPE cx_user_mng EXPORTING
      textid = cx_user_mng=>wrong_isrs.
    ENDIF.
I want to use the new exception class ,
how can i avoid this error ?
Best Regards
Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
Edited by: Joy Stpr on Jul 22, 2009 3:16 PM

Hi Joy,
Check this link.
[Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
Old and new exceptions cannot be used the same time, what does this mean???
Regards,
Lakshman.

Urgent help : Need to recover a database without backup and archivelogs

Hi,
We are in urgent need to recover a database without backup and archivelogs
one datafile seems corrupted
SQL> recover automatic database until cancel using BACKUP CONTROLFILE;
ORA-00279: change 10527325422479 generated at 07/27/2011 03:13:04 needed for
thread 1
ORA-00289: suggestion : /pys/u5/oradata/PYS/PYSarch/arch0001.0000181845.arc
ORA-00280: change 10527325422479 for thread 1 is in sequence #181845
ORA-00278: log file '/pys/u5/oradata/PYS/PYSarch/arch0001.0000181845.arc' no
longer needed for this recovery
ORA-00308: cannot open archived log
'/pys/u5/oradata/PYS/PYSarch/arch0001.0000181845.arc'
ORA-27037: unable to obtain file status
HP-UX Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/pys/u2/oradata/PYS/pay_system_01.dbf'

N Gasparotto wrote:
bsac14 wrote:
my database is in no archive mode
can you please tell how to restore
yes it is a datafile corruptionYou did not say how you defined that's a datafile corruption. You provide minimum to zero information.
I just need to bring the database up,no need any exact data
I can refresh from prod laterThen drop and recreate database. Basically and since you are not in archive mode, no recover is possible. Period.
Nicolas.Hi,
How did you come to the conclusion that your datafile is corrupted? Can you provide and supported logs?
Regards .....

To recover a database with old and new datafiles.

Similar Messages

Maybe you are looking for