To remove a cube frm PC

hI all,
how do i remove a cube from several diff PC's, (the cube is to be no longer valid),
when(the time) and how do i transport these PC's in this process.
Thanks,
Your help will be rightly appreciated

Vj,
You will have some table where all te info related to a particular process chain exists. I don't have system access now because of which I can't search for that table.
Also you can go to the respective PC and delink and delete teh process loading to that cube and transport that using transport connection.

Similar Messages

To remove a cube

Hi guys,
The requirement is to analyze the removal of a cube (an overview cube),
can u guys tell me the precaution and steps to take like archival, performance if
any and the functions this is doin has to be replaced by detail cube.
thanks,
your help will be greatly appreciated

Vj,
Replacing a cube with another one needs to be analyzed right from source till reporting. If the reports on the existing cube can be transfered to the detail cube(copied). Again, check if you need the xisting cube data or not. If needed you can keep it as it is and link the detail cube inbetween. just go ahead with impact analysis.

Permissions for role in OLAP cube are removed when cube is rebuild

Project Server rebuilds the OLAP cubes every 6 hours. I've recently added a role with "Process database" permissions, but this permission is removed each time the OLAP cube is rebuilt.
I've read in a different thread (slightly older software versions) that to solve this issue, you can script and schedule the handling of permissions for that specific role, but it's not really a solution. The duration for the OLAP cube to rebuild varies
in duration over time, and I'm not sure it's healthy to change the role permission on a cube when it's being rebuild.
Is there a different, elegant way to solve this? I'm sure this can't be the intention?
I'm running SQL Server 2008, Sharepoint 2010 SP2 and Project Server 2010 SP2

sorry, i dont have much experience with project server. But, from the quick glance, it does look like as you said the configs are very limited including the ability to change user roles. My suggestion is that you take the cube solution and add the user to
the role and redeploy to the AS. The assumption here is that, though you add the user manually, it is being written over with the old solution.
of course if you want to proceed with changing the roles via a script, you can schedule a job to run right after the cube has been processed each time.
probably better maintenance solution is to redeploy SSAS solution and reprocess.

Removed Process chain frm schedule by mistake

Hi Team,
just to check , i went in to the planing view of the PC & removed 1 of the sub chains from the schedule.
then I do shift f1 (that show current status for all chains in meta chain) .I see that subchain in grey color , in fact it shld hav been in red according to todays loads tht happened.
Tomm this meta chain trigger's at 12:05 noon, i doubt if tht sub chain will get triggered.
Again i checked in planing view for the Meta chain-right clicked on tht particular subchain ->display schedule jobs->It shows BI_PROCESS_CHAIN job scheduled.
even checked the variant , it doesnt show , changed by my id or somethg , even schedule option is same as before.(using meta chain).
can somebody tell me other ways to chk, if sub chain ill schedule tomm or not.if u feel its gonna trigger ,in what case do we go for planing view -->remove from schedule option.

Hi Gemita.........
In a meta chain I mean main chain all the sub chains are scheduled as immediate............and if you open the local chain then it will always be in descheduled mode........and it will only trigger when the predecessor process of that lacal chain will completed.............so you cannot remove a local chain from scheduling because by default it will be in descheduled.......to deschedule a local chain you have to right click on the local chain from outside(......ie without going inside the local chain) >> Display scheduled jobs >> from there you have to delete the release job BI_PROCESS_CHAIN...........so I don't think the loacal chain is desheduled...........
But you have said Again i checked in planing view for the Meta chain-right clicked on tht particular subchain ->display schedule jobs->It shows BI_PROCESS_CHAIN job scheduled.......
I don't think there is any problem.....
Is the loacal chain is in grey colour from outside also ? I mean without going inside the loacal chain.........
Still if you have any doubt........do one thing..........deschedule the meta chain and scedule it back again.........
Hope this helps........
Regards,
Debjani........

How to remove character from cube

Dear Friends,
How to remove character from info cube.
I have removed from info source and update rules.
but unable to remove from cube.
Regards
Ramu

Hi,
If you are working in BI 7.0, then you can use remodelling to remove the characteristic from the cube without deleting the data.
But, if you are working in BW3.x, then definately you need to first delete the data, then delete the characteristic and then again activate the cube and load the data.
There is no other solution except the above one...

Data movement between cubes.

hi experts,
Am facing problem while moving data from two different cubes in to another cube. Am able to map all the fields but while executing it is giving some process error.. Please let me know how to do this...
with regards,
Latha Shree

Inorder to load into an infocube from 2 other cubes, create a transformation between final cube & first cube(frm where you are extracting data) with, first cube as the source & final cube as the target. Map respective fields and activate the transformation. Then create DTP and activate it.
similarly, create one more Transformation betwn second nd final cube and DTP and activate it.
Then execute the two DTPs which will load the data from first and second cubes in to the final cube..
U can also refer the following link for more info...
BI to BPC Mapping

FRM-18108 When loading form (due to change in olb)

Hello,
I am working with oracle forms 6i and have an object library and pl/sql library that are both utilized in all forms I work with. There was a duplicate stored procedure in the object library and pl/sql library so I removed the duplicate from the object library. This stored procedure that i removed from the olb was subclassed or copied to many of the forms I work with so I have been manually deleting that stored procedure from the forms so that my application will pick up the current version in the attached pl/sql library. The forms run fine however every time I open the forms that had the subclassed library object removed I get FRM-18108 Failed to load the following objects (the message references the object library as the source module and the stored procedure that was removed as the source object.)
I am not sure why forms is still looking for the stored procedures in the olb, I am confident that the subclassed copies from the olb have been removed form the form and there is no trace of the original code in the olb either. When running the form and calling that stored procedure it picks up the version from the pl/sql library without issue.
Both the object library and pl/sql library are correctly attached to the form and the registry does contain the path of their physical location. The form has been recompiled several times but I can't seem to get rid of the error.
Anyone have any idea what I can do to get rid of the FRM-18108 when opening forms that contained this subclassed unit that has been completely removed? It doesn't hurt anything but is annoying. Been searching through the forms but all I could find was issues with attaching the libraries which didn't help me on this.
Thanks!
Terra

use
SELECT      ...
TO_DATE(decode(warrenty_flag_yn, 'Y', TO_DATE(warrenty_upto),
                                   'W', TO_DATE(warrenty_upto),
                                   'A', TO_DATE('31-MAR-'||v_year),
                                   'C', TO_DATE('31-MAR-'||v_year),
                                   'X', TO_DATE('31-MAR-'||v_year),
                                   'N', TO_DATE('31-MAR-'||v_year)
                ),'DD-MM-RR'
         ) AS amc_date
FROM      pc_item_procurement_history a,
...

Process Chain for Real Time Demon

Please help I am stuck I followed the step by sdn but this is missing in step. how to create now process chain.
I created the below
DSO CONNECTED TO dATASOURCE via Trans,
Real Time IP
Real Time DTP
assigned to Datasource and assigned the DS, IP, DTP to Deamon in RSRDA. NOW I started also manually via start all IP. but How to set the process chains now.
PLEASE HELP ME STEP BY STEP TO PROCESS CHAIN SINCE i am new to this daemon in process chains
Thanks
Soniya
null

Hi
refer to this
CREATION OF PROCESS CHAINS
Process chains are used to automated the loading process.
Will be used in all applications as you cannot schedule hundreds of infopackages manually and daily.
Metachain
Steps for Metachain :
1. Start ( In this variant set ur schedule times for this metachain )
2.Local Process Chain 1 ( Say its a master data process chain - Get into the start variant of this chain ( Sub chain - like any other chain ) and check the second radio button " Start using metachain or API " )
3.Local Process Chain 2 ( Say its a transaction data process chain do the same as in step 2 )
Steps for Process Chains in BI 7.0 for a Cube.
1. Start
2. Execute Infopackage
3. Delete Indexes for Cube
4.Execute DTP
5. Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Execute DTP
5. Activate DSO
For an IO
1. Start
2.Execute infopackage
3.Execute DTP
4.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage ( loads till psa )
3.Execute DTP ( to load DSO frm PSA )
4.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute DTP ( to load Cube frm DSO )
8.Create Indexes for Cube
3.X
Master loading ( Attr, Text, Hierarchies )
Steps :
1.Start
2. Execute Infopackage ( say if you are loading 2 IO's just have them all parallel )
3.You might want to load in seq - Attributes - Texts - Hierarchies
4.And ( Connecting all Infopackages )
5.Attribute Change Run ( add all relevant IO's ).
Start
Infopackge1A(Attr)|Infopackge2A(Attr)
Infopackge1B(Txts)|Infopackge2B(Txts)
/_____________________|
Infopackge1C(Txts)______|
\_____________________|
\___________________|
__\___________________|
___\__________________|
______ And Processer_ ( Connect Infopackge1C & Infopackge2B )
__________|__________
Attribute Change Run ( Add Infobject 1 & Infoobject 2 to this variant )
1. Start
2. Delete Indexes for Cube
3. Execute Infopackage
4.Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Activate DSO
For an IO
1.Start
2.Execute infopackage
3.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage
3.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute Infopackage
8.Create Indexes for Cube

Issue while creating Purchase order (ME21N)

Hi Friends,
Hope U Have a Good Day...
My issue is while creating purchase order , I enter vendor and in org.data tab I enter Pur.Org,company code and purchase group. After entering these values if I check in communication tab, the sales person and telephone fields are filled with corresponding data.
Now my requirement is after entering Pur.Org, Company code and purchase group, and if I go and check in Communication tab, these two fields ( sales person, telephone ) should be blank.
Please help me in this issue...
Thanks & Regards
Ganesh Reddy

Hi Ganesh,
This is being fetched frm the vendor master and if u wan this field to be blank
Then u hav to remove those data frm the vendor master .
Put tat vendor, comp code n purchase org
Then select pur org data alon - >chk in purch data
u can find tat sales person n telp no being appeared in the PO
lemme know if u hav any prob in getting tat .

Updating an existing process chains created in 3.5 upgraded to 7.0

I added DTP's to my process chain, see below process.
1) Load Inventory data to PSA (R3 to BI)
2) Run ODS DTP
3) Activate ODS
4A) Run DTP to Cube (If I add this, it works, but the Process Chain shows warning, must have Further processing before DTP to Cube.) Is a warning okay?
4B) Run Further Processing (Data Store object, ODS_BF). The Process chain check shows no warning, no error. But, when the process chain is executed, this last process executes DTP to the cube and also executes the Info Package from BI to BW (8ODS). We are not using the Info Package of BI to BW at this time, we did not migrate this info package.
Please help me understand how this should work.
Thanks,
Maximina Barry

Warning is okay but its no harm to have " Further Processing " in ur chain.
1. Start
2. Execute Infopackage ( loads till psa )
3.Execute DTP ( to load DSO frm PSA )
4.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute DTP ( to load Cube frm DSO )
8.Create Indexes for Cube
Infopackages n DTPs shud all be delta in update type.
Delete n Creating Indexes if preffered for performance.
Also look at : Further Processing Type In Process Chain

BPEL process with no payload

Is a BPEL process required to have a payload? If not how do you create one? I have a process that I need to invoke that requires no input. When I invoke it from the test screen I have to enter a meaningless value into the payload field to execute it.
This is for 11g.
Edited by: user3161913 on Jan 13, 2011 9:31 AM
Edited by: user3161913 on Jan 13, 2011 9:31 AM

Hi,
It not mandatory to have the payload ...u can remove that element frm the xsd and just invoke the BPEL.

View + stored function + synonym for other user

Dear All!
I've got a quite strange problem which I cannot decide whether it's caused by my lack of knowledge on the appropriate topic or by an Oracle bug. I'm already after some heavy googling on the topic and I was unable to track any valuable answers neither in forums nor in the Oracle documentation. I'll try to be as short and specific as possible.
Database: Oracle 10g
Result of "SELECT BANNER FROM V$VERSION":
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
"CORE 10.2.0.4.0 Production"
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
I have two users in the database for a single Web application: UAPP01, which is the owner of application DB objects and UAPP02 which is the application user connecting to the DB. The application runs for quite many years by now and DB structure layout has always been following a simple logic: for each DB object used by the app. (tables, views, packages and stored procedures/functions) and found in the UAPP01 there exists a synonym in the UAPP02 schema. For the privileges to be set correctly a role is created: RL_MY_APPL which is granted the necessary privileges on objects of UAPP01 (CRUD on tables, SELECT on views, EXECUTE on procedures, etc..). This role is granted to UAPP02.
In the previous days I was about to extend the DB with a view that invokes a stored function. This pattern has already occured in the DB previously so I kept following existing conventions: I've created the stored function and the view in the UAPP01 schema, granted SELECT on the view to RL_MY_APPL and created the synonym for it in the UAPP02 schema. This is where the entire functionality began to act strange. I'll try to explain with a simplified example that was sufficient to reproduce the problem:
REM ========================================
REM Execute below code as UAPP01 user.
REM ========================================
REM Test function.
CREATE OR REPLACE FUNCTION testfunction(p_param NUMBER) RETURN NUMBER IS
BEGIN
RETURN p_param *2;
END;
REM Testview version 1. causing trouble.
CREATE OR REPLACE VIEW testview AS
WITH testdata AS
SELECT /*+ materialize*/ LEVEL AS d
FROM dual CONNECT BY LEVEL <= 100
SELECT a, b, c, SUM(d) AS sum_d
FROM
SELECT FLOOR(dbms_random.VALUE(1, 100)) a, FLOOR(dbms_random.VALUE(1, 100)) b, FLOOR(dbms_random.VALUE(1, 100)) c, testfunction(d) AS d
FROM testdata
GROUP BY CUBE(a, b, c)
REM Testview version 2. not causing trouble.
CREATE OR REPLACE VIEW testview AS
SELECT a, b, c, SUM(d) AS sum_d
FROM
SELECT FLOOR(dbms_random.VALUE(1, 100)) a, FLOOR(dbms_random.VALUE(1, 100)) b, FLOOR(dbms_random.VALUE(1, 100)) c, testfunction(d) AS d
FROM
SELECT LEVEL AS d FROM dual CONNECT BY LEVEL <= 100
GROUP BY (a, b, c)
REM Synonym.
CREATE OR REPLACE SYNONYM UAPP02.testview FOR UAPP01.testview;
REM Grants.
GRANT SELECT ON testview TO RL_MY_APPL;
When creating TESTVIEW with the 1 ^st^ version I cannot query it using the UAPP02 user, I'm constantly getting the error: ORA-00904: : invalid identifier. However, when I use the 2 ^nd^ version everything runs perfectly. What is common in the two cases is that both versions use the TESTFUNCTION function. I have not granted the EXECUTE rights on TESTFUNCTION to the RL_MY_APPL since it was never needed previously (for other views using stored functions) and as far as I know it's not necessary (as both the view and the function are owned by UAPP01). The strange thing in the above behaviour is that the function is used by both versions, however only one of them fails. This is where I thought it's not a granting issue, otherwise neither of the versions would have worked and I think I would have received a different error stating that UAPP02 lacks the necessary privileges on underlying objects of the view.
As I further digged into the problem by examining the EXPLAIN PLAN output for the two versions I found that version 1. leads to a TEMP TABLE TRANSFORMATION and to MULTI TABLE INSERTs, whereas version 2. simply executes the query without doing such things. In my setup I presume the MULTI TABLE INSERTs were caused by the GROUP BY CUBE. When I simply removed the CUBE and used only GROUP BY the TEMP TABLE TRANSFORMATION remained in place but the MULTI TABLE INSERTs disappeared. As a result of this small modification the view again began to work when I executed it through the synonym and using the UAPP02 user.
With the original DB objects of our application the behaviour is even more strange: the error comes up if I select from the view and filter for a column that is grouped in the query whereas it works correctly if I filter for the aggregated columns. However, I couldn't reproduce this with the above simplified example.
No problem occurs with any of the versions if I query the view using the UAPP01 user.
This hectic behaviour made me suspect that the TEMP TABLE TRANSFORMATION + MULTI TABLE INSERT + synonym + stored function combo appears to bring a strange Oracle bug to the surface...
As a final note: when executing GRANT EXECUTE ON TESTFUNCTION TO RL_MY_APPL everything works fine in all cases. I know I could simply live with this but I'd really like to get to the bottom of this. Although this extra GRANT appears to solve the problem I don't really trust it. I'd really like to avoid the bug emerging again in Production in case this extra GRANT were not sufficient due to some unknown misteries.
Excuse me, the post has become a bit lengthy. Thanks in advance for anyone who's willing to read through and answer it!
Regards,
Krisztian Balazs Szaniszlo

The error is thrown at run-time and only for the UAPP02 (second) user.
The problem is that the appearance of errors is independent of whether the query contains the call to the stored function or not.
So far I thought that if I use a stored function indirectly, like in this setup: UAPP02.synonym -> UAPP01.view -> UAPP01.stored function, then I don't need the grant. Of course, I understand that if I had used it directly, like :UAPP02.synonym -> UAPP01.stored function then I'd need the GRANT EXECUTE.
Shall I just ignore the strange behaviour and go on by adding GRANT EXECUTE privilege on all the functions used indirectly through views? It seems to solve the problem, but this behaviour is disturbing me quite and I fear the real root cause of the problem can emerge later in a different fashion.

DTP step taking longer time

Hello Experts
As Iam new to SDN I tried to find an answer to this issue. Please find below is the Issue
There is a process chain. In this PC, After deleting the Index step, there is a DTP step, which updates the Cube with one DSO; the first DTP step is much delayed for update to cube. But where as the immediate DTP step to the same cube with another DSO is finishing so faster.
The prob is with the first DTP step which updates the cube frm DSO In this there is one Job with the namingconvention shown as BIDTPR_545787_1 was running more than 10000sec to update the Cube. Dont know why this job is running beyond so much time, where as it usually prior to some days back completes within 3000 secs.
Now the prob. is that the Data loading performance of the Prod system effected, where this DTP step is ruuning beyond time. Please can someone suggest how to find and resolve this issue as not sure why the below kind of JOBS are running for more time causing the PC much delayed for completion
BIDTPR_545787_1
BIDTPR_545689_1 etc of the First DTP are running longer. Pls help!
Regards
MD

Hi
There could have been many reasons like
during that particular DTP is scheduled,there will not be neough work processors,this is due to the some other long running loads/jobs are running and which would have been occupied.hence during this DTP runs,parallely crosscheck in SM12,SM50&SM51.
And also check that particular job in SM37 and understand where does its taking more time.
There could have been expensive select statement,if any routines used in the transformations.
Try to find out this.
Regards
Jagadish

How to turn off the authorization checks for a object in infoproviders?

Hi - how can I turn off the authorization check for an object (ex: 0orgunit) in infoproviders?
I have 0orgunit as an authorization-relevant object and is used in one of the cubes. When reports are run for this cube, this is causing authorization issues. The object is present in other cubes also but I have to remove or turn off the authorization check of this cube alone. How to do this? Please help.
Thanks,
Raj.

Hi Raj,
Srinivas, is right , however in BI7 the correct transaction is RSECADMIN and not RSADMIN.
In BW3.5, use RSSM transaction to do thins.
OR
Go to transaction RSECAUTH ---> Choose the authorization object that has been created for org unit(and has been assigned to the user). Go to change mode. Remove the cube from the dimension 0TCAIPROV
If you are using old authorization concept in 3.5 or in 7.0
Go to RSSM. In the checks for infoprovider, enter your infoprovider name. Choose change.Here you will see a checkbox to switch off the authorization.
Hope this helps you,
Best regards,
Sunmit.

How to create process chains, infopackage groups & Meta chains

Hi,
can anyone explain me about process chains,infopackage groups & Meta chains.
if possible give me examples for each.
Thanks & Regards,
cheta

Metachain
Steps for Metachain :
1. Start ( In this variant set ur schedule times for this metachain )
2.Local Process Chain 1 ( Say its a master data process chain - Get into the start variant of this chain ( Sub chain - like any other chain ) and check the second radio button " Start using metachain or API " )
3.Local Process Chain 2 ( Say its a transaction data process chain do the same as in step 2 )
Steps for Process Chains in BI 7.0 for a Cube.
1. Start
2. Execute Infopackage
3. Delete Indexes for Cube
4.Execute DTP
5. Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Execute DTP
5. Activate DSO
For an IO
1. Start
2.Execute infopackage
3.Execute DTP
4.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage ( loads till psa )
3.Execute DTP ( to load DSO frm PSA )
4.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute DTP ( to load Cube frm DSO )
8.Create Indexes for Cube
3.X
Master loading ( Attr, Text, Hierarchies )
Steps :
1.Start
2. Execute Infopackage ( say if you are loading 2 IO's just have them all parallel )
3.You might want to load in seq - Attributes - Texts - Hierarchies
4.And ( Connecting all Infopackages )
5.Attribute Change Run ( add all relevant IO's ).
Start
Infopackge1A(Attr)|Infopackge2A(Attr)
Infopackge1B(Txts)|Infopackge2B(Txts)
/_____________________|
Infopackge1C(Txts)______|
\_____________________|
\___________________|
__\___________________|
___\__________________|
______ And Processer_ ( Connect Infopackge1C & Infopackge2B )
__________|__________
Attribute Change Run ( Add Infobject 1 & Infoobject 2 to this variant )
1. Start
2. Delete Indexes for Cube
3. Execute Infopackage
4.Create Indexes for Cube
For DSO
1. Start
2. Execute Infopackage
3. Activate DSO
For an IO
1.Start
2.Execute infopackage
3.Attribute Change Run
Data to Cube thru a DSO
1. Start
2. Execute Infopackage
3.Activate DSO
5.Further Processing
6.Delete Indexes for Cube
7.Execute Infopackage
8.Create Indexes for Cube

To remove a cube frm PC

Similar Messages

Maybe you are looking for