To remove "&amp" from XML generated file.

Dear All,
I am facing one problem, when XML file is getting generated.
Here when ever special character comes like "&", it shows me in the output of XML file as "&amp".
How should it be avoided? Pls require some suggestions.

Dear Jorg,
Ya that's absolutely true, as i am not getting any error but want to fix that because when i download that XML file, after that i have to again upload that to some portal.
So i request for the solution if anything could be done with it.
Thank You
Vishvesh

Similar Messages

How do I remove & amp; from XML?

Hello,
DB: 11.1.0.7.0
I am trying to use XMLAGG to concatenate multiple fields delimited by "|". However, if the fields have characters like "&" or "<" they are being transformed in the XML. How do I convert them back?
SELECT rtrim (xmlagg (XMLELEMENT (E, mck.concatenated_segments||', ')).extract ('//text()'),', ') concatenated_segments
FROM mtl_category_sets mcs,
 mtl_item_categories mic,
 mtl_categories_kfv mck
WHERE mcs.category_set_name = 'LiDestri Costing Sub Category'
 AND mic.inventory_item_id = 5862
 AND mic.organization_id = 98
 AND mic.category_set_id = mcs.category_set_id
 AND mck.category_id = mic.category_id
 AND mck.structure_id = mcs.structure_idResult (space added so it is not converted in html)
BRANDY &lt ;= 170 PROOFDesired Result
BRANDY <= 170 PROOFHow can I convert it to remove the & amp; type symbols?
Thanks in advance,
--Johnnie

Hi Johnnie,
Use XMLCast :
select rtrim(
 xmlcast(
 xmlagg(
 xmlelement(e, mck.concatenated_segments || ', ')
 as varchar2(4000)
 ) as concatenated_segments
from ...

How to remove Unicode from XML file

I get following error when unmarshal xml:
[java] org.xml.sax.SAXParseException: An invalid XML character (Unicode: 0x15) was found in the element content of the document.
Anyone know how to remove Unicode from xml file? Can I remove the unicode by rebuild the file?
Thanks

These sort of error usually occur when you're using a different character encoding to read the file than the one you wrote it with. Perhaps if you were to post the problem section of the file and/or the code that created it in the first place.

Remove element from xml using dom.

i want to remove an element from an xml file using dom.
i remove the element but the whole content of the file is also deleted.
how can i rewrite the file.

vij_ay wrote:
subject :Remove element from xml,but if empty element in input file then output should be <tag></tag>, not like <tag.xml/>I assume you mean <tag/> but why do you want this? Any application that will not accept this valid XML construct is flawed and a bug report should be raised against it.

Removing namespace from xml

Hi,
I have an xml which has some target namespace.
I need to remove the namespace and the qualifiers and put it on a machine using a file adapter.
Any help in this regard is highly appreciated.
With Regards,
Harsh

Please go throught the below link
Removing namespace from xml created

Remove Namespace from XML File except Attribute

Hi XI Experts ,
1.I have referred to the code of xslt Generic XSLT Code to Remove ALL Namespaces from XML:
http://forums.sdn.sap.com/thread.jspa?threadID=1920630
But this removes the Attribute : id from the records .
My expected output is supposed to be :
<?xml version="1.0" encoding="GBK"?>
<body>
<head>
 <nsrsbh>112001069711</nsrsbh>
 <nsrmc>诺维信（中国）生物技术有限公司出口发票</nsrmc>
 <dcrq>20120209</dcrq>
 <sssq_q>20111201</sssq_q>
 <sssq_z>20120207</sssq_z>
 <records>4</records>
</head>
<data>
 <record id="1">
 <fpdm></fpdm>
 </record>
</data>
</body
But after using this XSLT code it removes :id from <record_1 id=> and generated the below code :
The xml file now doesn't contain teh attribute :id
<?xml version="1.0" encoding="GBK"?>
<body>
<head>
 <nsrsbh>112001069711</nsrsbh>
 <nsrmc>诺维信（中国）生物技术有限公司出口发票</nsrmc>
 <dcrq>20120209</dcrq>
 <sssq_q>20111201</sssq_q>
 <sssq_z>20120207</sssq_z>
 <records>4</records>
</head>
<data>
 <record>
 1
 <fpdm></fpdm>
 </record>
</data>
</body>
Could you please provide your input
Plaese note : Here XI versin iS x1 3.0 SP7 . I have tried suing the Analyzer bean for the Encoing of Chinese : GBK Intsead of UTF-8 in the Namespace . But AF_Modules/XMLAnonymizerBean is not comptacible with XI 3.0 SP7
Hence i have used the following code to remove namespcae and add Encoding :GBK instead of UTF-8:
<?xml version="1.0" ?>
<xsl:stylesheet
xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="GBK"/>
<xsl:template match="node()|@*">
<xsl:copy>
 <xsl:apply-templates select="node()|@*"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>

You could use exclude-result-prefixes.
For example:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:wt="http://www.example.com" exclude-result-prefixes="wt">
</xsl:stylesheet>

Removing color from a PDF file

I am trying to remove the colors from a PDF file.
To do this I print it to "Adobe pdf" setting the parameter in the Paper/Quality tab, Black & White.
But in the generated PDF the color is still there !
How can I remove the color from a PDF file ?
Tks.

Try the print production options under the Advanced menu.

Use of PL/SQL to populate table columns from XML data file

I'm trying to find the easiest way to transfer data from a flat file that is in XML format into a traditional Oracle table. Not retaining the XML but actually map an XML element to a column so standard SQL, Forms, Reports, etc can access like it was created using a Form.
Example: Table A has column names Tom, Dick and Harry and the XML file has elements Tom, Dick and Harry and I just want a function that maps and inserts/loads the data into Table As individual columns.
The process needs to be easily initiated by an end user. The user gets the XML data file via an email attachment and needs to do something like a Concurrent Request to pull in the file and load it. Using PL/SQL would be great.
I appreciate any help that can be provided.

Hi,
HELP!!!!!
We are having the same problem and we are using oracle 10ir2.
We create an object type (sql type globally not in a package):
CREATE OR REPLACE TYPE G_EX AS OBJECT
( EX_ID NUMBER ,
EX_CON VARCHAR2 ( 100 ) ,
EX_L VARCHAR2 ( 30 ) ,
EX_T VARCHAR2 ( 4000 ) );
CREATE OR REPLACE TYPE G_EX LIST AS TABLE OF GEX AS ;
then we insert data through a bulk collect within the package with the table declared of this array of object types:
v_table G_EX _LIST:= NULL;
SELECT G_EX (ex_id
,ex_con
,ex_l
,ex_t )
BULK COLLECT INTO v_table
FROM exs_lookup;
I am using the syntax (below) but it gives PL/SQL: ORA-00902: invalid datatype
sometimes not always:
SELECT G_EX ( ex_id
,ex_con
,ex_l
,ex_t )
BULK INTO v_data_record
FROM TABLE (v_table)
WHERE ex_id = p_key;
where p_key - is a number type
and v_data_record is a G_EX object type.
I was wondering if anyone else encountered a similar problem, and knows what we may have done wrong. Since we dont understand why this piece of code is throwing this ora-00902 errors occasionally not always.
Also, if we restart the database up once this errors occurs it appears to stop throwing this ora_00902 error for a lenght of time. Then it comes up with the ora-00902 error again (why?)
thanks

Data Import from XML Format file

I want to import data from XML file format.Can i do it ? If yes then please give me more details in the step.

Pl read the below link.
It will be helpful.
SAP Business One Application
Jeyakanthan

[solved] remove packages from a txt file list

as the subject header says, I want to run "pacman -R" and have it read a list of packages from a text file.
Is this possible????
text file is formatted as such....
file1
file2
file3
Last edited by orphius (2013-07-09 08:11:53)

Please remember to mark your thread as [Solved] by editing your first post and prepending it to the title.

Script code sample for looping through the records from xml data file in formCalc script

Hi
 I have a xml data file which contains a sequence of repeating applicant data like given below
 US
 II
 CEO
 Mr
 111111111
 0000000111
 GuarantorA
 111
 IN
 11111
 WILLIAMS1
 R3
 KENNETH1
 City1GU
 PA
 1934-03-14
 [email protected]
 GU
 R
 113 Lazlo LaneCA
 Suite 3500CA
 OaklandCA
 TX
 11345
 AL
I want to assign a textfield with a value based on the value of coap_flag.
So i need to loop through all the record and check the value of coap_flag and then assign the textfield a value based on that.
I am new to Adobe livecycle...Please help me how it can be done.
I have developed something like this
foreach Item in ($record.applicant[*].coap_flag) do
test.value=Item
if(test.value=="MA")then
concat($record.applicant.first_name,$record.applicant.middle_name)endif
endfor

Using the data you posted in the forum, I copied it a couple of times to give multiple records and used this code to extract the different values that you wanted. I had to wrap it in a <root> node that I called root (to make it valid XML). In my case I wrote the extracted values to a field, but in your case you can do whatever you want with them. Note that this was done in javascript: var currentElement; var obj; //Get the nodes below the root node in the dataDom obj = xfa.datasets.data.root.nodes; //Set an initial value for the textField TextField1.rawValue = "The values of the coap_flag are: "; //Loop through the nodes in the obj set for (i=0; i< obj.length ; i++){ //set the currentElement to the 1st child node currentElement = obj.item(i); //Check to see if it is an applicant node if (currentElement.name == "applicant"){ //It is an applican, now find the coap_flag node value and write it to the text field TextField1.rawValue += "\n" + xfa.resolveNode("xfa.datasets.data.root.applicant[" + i + "]").coap_flag.value; } }

Loop through the records from xml data file in formCalc script

Hi
 I have a xml data file which contains a sequence of repeating applicant data like given below
 US
 II
 CEO
 Mr
 111111111
 0000000111
 GuarantorA
 111
 IN
 11111
 WILLIAMS1
 R3
 KENNETH1
 City1GU
 PA
 1934-03-14
 [email protected]
 GU
 R
 113 Lazlo LaneCA
 Suite 3500CA
 OaklandCA
 TX
 11345
 AL
I want to assign a textfield with a value based on the value of coap_flag.
So i need to loop through all the record and check the value of coap_flag and then assign the textfield a value based on that.
I am new to Adobe livecycle...Please help me how it can be done.
I have developed something like this
foreach Item in ($record.applicant[*].coap_flag) do
test.value=Item
if(test.value=="MA")then
concat($record.applicant.first_name,$record.applicant.middle_name)endif
endfor

Using the data you posted in the forum, I copied it a couple of times to give multiple records and used this code to extract the different values that you wanted. I had to wrap it in a <root> node that I called root (to make it valid XML). In my case I wrote the extracted values to a field, but in your case you can do whatever you want with them. Note that this was done in javascript: var currentElement; var obj; //Get the nodes below the root node in the dataDom obj = xfa.datasets.data.root.nodes; //Set an initial value for the textField TextField1.rawValue = "The values of the coap_flag are: "; //Loop through the nodes in the obj set for (i=0; i< obj.length ; i++){ //set the currentElement to the 1st child node currentElement = obj.item(i); //Check to see if it is an applicant node if (currentElement.name == "applicant"){ //It is an applican, now find the coap_flag node value and write it to the text field TextField1.rawValue += "\n" + xfa.resolveNode("xfa.datasets.data.root.applicant[" + i + "]").coap_flag.value; } }

How to remove namespace from xml in ALSB?

I have a xquery transformation which works for data without namespace. But the data coming from source system has namespace details in it. Is there a way to strip the xml of namespace details from xml before passing it to xquery transformation?

Hi
silly mistake :P
Following 'bold' declaration was not there!!
Just copy paste following code as xquery and it will be all ok:
declare namespace xf = "http://tempuri.org/vijfhuizen/com/myMessage/";
declare function xf:strip-namespace($e as element())
as element()
element { xs:QName(local-name($e)) }
for $child in $e/(@*,node())
return
if ($child instance of element())
then xf:strip-namespace($child)
else $child
declare variable $e as element() external;
xf:strip-namespace($e)

DataWriter - removing attributes from xml tag at the start of document

Hi,
I'm using DataWriter for generating a large XML document, however I do not want the attributees of the starting xml tag to appear in the final file.
Eg: <?xml version="1.0" {color:#ff0000}encoding="UTF-8" standalone="yes"{color}?>I do not want to output the part highlighted in red.
What could be the possible ways to do it? I prefer if it can be removed in the begining itself instead of parsing the document and removing in the end.
-TIA, saum
Edited by: nkrust on Feb 15, 2010 4:29 PM

try {
 ByteArrayOutputStream baos = new ByteArrayOutputStream();
 Marshaller marshaller = new Marshaller(new OutputStreamWriter(
 baos));
 marshaller.marshal(ResponseContents);
 // Create an object of type Document from the XML document
 // created.
 DocumentBuilderFactory domFactory = DocumentBuilderFactory
 .newInstance();
 domFactory.setNamespaceAware(false);
 DocumentBuilder builder = domFactory.newDocumentBuilder();
 responseDoc = builder.parse(new ByteArrayInputStream(
 ResponseUtils.formatXMLString(baos.toString())));
 } catch (IOException e) {
 e.printStackTrace();
 System.out.println(e.getMessage());
 }

How to remove indents from XML?

I have a xml like this:
<?xml version="1.0" encoding="UTF-8"?>
<view>
 <help>
 <block>No.1</block>
 <device>USB</device>
 </help>
</view>
How could I output the xml to :
<?xml version="1.0" encoding="UTF-8"?><view><help><block>No.1</block> <device>USB</device></help></view>
The reason to output like this is to make the xml comparison passed.
I use org.custommonkey.xmlunit.XMLTestCase.compareXML to compare two xml string, one from Java code, the other from C# code. Now, since there are new lines and whitespaces embedded in the Java generated XML, the comparison always failed. Is there any way to output the indent xml to the one string only?

Try running the strings through something like this before comparing:
String <stringname> = <stringname>.replaceAll("\\n|\\t|\\s|\\r", "");
that should normalize them both to no spaces, tabs, newlines, carrage returns.

To remove "&amp" from XML generated file.

Similar Messages

Maybe you are looking for