To render or not to

Do I need to " render " my edited video? and if so do I render before I add sound track and also before I save it or save it then " render"
Thanks for your help
Joe Geoffroy

Yes files will do any rendering needed when you export. In that case the render time is added to the export time.
rh

Similar Messages

My Render doest not start help!

My Render doest not start, it appears that isnt even processing anything, not even estimated time or frames in my render folder, please help me as soon as you can i'm desperate!

We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

Maximum Render Quality not installed

I am using Premiere Pro CS4 and did not see the Use Maximum Render Quality when exporting a video, my only choices are "Use Preview Files", "Include Source XMP MetaData", and "File Info".
I found one post that said it was in a update so I checked my verison and it said 4.0.0. I then checked for updated from the Help menu and ran that. version did not change and still no Max Render Quality so I found the download for PP CS4 4.2.1 and downloaded and unsipped it.
When I ran the EXE file it started but then stopped and said "Cannot Install click the Quite button". In the text of the window is said everything for 4.2.1 was installed except the language packs. Verson number is still 4.0.0.
What else can I try?
Thanks.

Thank you Ann
on the reinstall and updates, does the last update (4.2.1) for Premiere Pro CS4 have all the updated combined or do I need to run them one at a time?
also does the Encore update (4.0.1) run or included with the Premiere updates?
I will do this starting monday, i hope to have this 2,000 ft project done tonight so I can deliver it tomorrow but will keep my data and rerun it after the update if Max Render shows up
Thanks again

JSF Design View broken? Fallback Rendering, "Render Kit" not found

Hi,
I just wanted to toy around with JDeveloper 11g TP3, created a new project, added technology scope JSF (+ JSP/Servlets, etc.) then the tag-library ADF Faces Component 11-ji3.
Then I created a data control from a POJO and wanted to visualize this within a JSF page. So I created one (via faces-config visual editor), dragged the appropriate getter-method to the page in the up-to-this-point working WYSIWYG editor, selected ADF-read-only-form and suddenly found myself in the JSF "alternate rendering" (a view like in an hierachical XML editor). I enabled "design time messages in log" to see what the problem was.
Stopping/Starting JDeveloper or removing tag libraries like suggested in other threads did not work. I was unable to reactivate the wysiwyg editor for this page or any new JSF page in this application, always the "alternate rendering".
Log said "oracle.sql.OraData" was missing, so I added ojdbc6.jar to the project classpath. Didn't help, no wysiwyg editor, log now says:
--- snip ---
18.02.2008 14:12:37 oracle.adfinternal.view.faces.lifecycle.LifecycleImpl _isPostback
WARNUNG: Render Kit konnte nicht gefunden werden
WARNING: A problem was encountered executing the page. Using fallback rendering.
java.lang.NullPointerException
     at org.apache.myfaces.trinidad.util.Service.getService(Service.java:82)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl._getExtendedRenderKitService(ViewHandlerImpl.java:333)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:154)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:633)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:244)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:204)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
--- end ---
I have this error even for newly created (ie blank/HelloWorld) JSF pages in my application. I started adding some libraries, but nothing helped. How do I reactivate the wysiwyg editor?
Thanks!

Frank,
thanks for the reply. I will try what you suggested, but the trinidad-config.xml is actually not missing in my project, although it does not include a render kit definition.
As my first step with 11g I also tried one of the tutorials (http://www.oracle.com/technology/obe/obe11jdev/11/ejb/ejb.html) and there the wysiwyg was working nicely the whole time.
In both cases (my project == not working wysiwyg editor, tutorial == nicely working wysiwyg editor) the content of the trinidad-config.xml is the same:
--- trinidad-config.xml ---
<?xml version="1.0" encoding="windows-1252"?>
<trinidad-config xmlns="http://myfaces.apache.org/trinidad/config">
<skin-family>blafplus-rich</skin-family>
</trinidad-config>
--- end-of-file ---
Rgds
Axel

Trying to render, get "Not Found" mesages

Seems like I've had this problem years ago, but I can't remember what caused it.
I have a section with 3 video tracks, 2 of which are nested sequences. When I try to render, it will render a portion of it if I hit "cancel", but if I try to render the whole section there is a message that says "not found" and nothing else was rendered.
I also saw "General Error" once or twice.
Any idea how I can fix this?

What format are you sources and what are your sequence settings? I assume your nests' settings match the containing sequence (but if not, let us know).
You might try rendering within the nest and see if that's successful.

Final render does not replicate what is on canvas

I am creating a highlight reel for a a football player. In order to make the video easy to understand i created a circular highlight to follow the player in the clip. I used the "shape" option and animated with setting keyframes in the motion tab. What i see in the canvas is exactly what i want. However, When i render it out the "circle" does not follow the player as it does when i play it back in the canvas......I tried different render settings and nothing does the job. Please advise to me why it is doing this. The project is complete..... i just cant get it to render the way it should.
This project is due tomorrow and i have never had issues like this before.
Thanks.
thirdfloor

Try using the "classic" PrintToPDF @ http://www.jwwalker.com/pages/pdf.html
This way you will be creating a PDF file using classic instead of OS X's Print To PDF.
 Cheers, Tom

M/AMC - "Ad Render" Functionality not working...

Dear Experts,
System:- SAP IS-M/AMC (Media & Advertisement - Classified)
The landscape of my setup of M/AM & M/AMC is on the same server and I could very well create a simple order and compose a simple ad and save it.
While booking a classified advertisement and choosing a predefined template of "REAL ESTATE" we tried using option -- in the UI Editor Menu, Ad -> "RENDER" the text is not getting updated in the editing area.
Where could be the problem, please revert ASAP.
With Regards,
Ronald Olivera
+91-9821507153

Dear Sandeep,
I know you very well. This question I raised is not a joke to be considered.
Ronald

Render Previews - not working?

I'm attempting to render my Premiere timeline (in AME) using previews. My timeline has been rendered to a Cineform codec. All is green and as expected there, but the transcode from Cineform to H264 is taking hours (with 6-8 minute preview rendered sequences)
am I missing something?

Thanks Ian. So to see if I understand correctly ... when I hover over a template in the print module the preview window will show what the template will look like in print but not necessarily how it will look with the selected photo?

Adobe Premier Pro cs4: Maximum render quality not showing in drop down menu in Export screen

I have been trying to export a movie with settings i previously used but for some reason the Maximum render quality option that comes from the drop down menu next to video audio filter multiplexer etc is not showing up.. will someone plz tell me how to fix this...

Maximum render quality was introduced in an update for Premiere Pro CS4. Choose Help -> Check for Updates.

Export / Render error - "Not found"

Hello all,
A new, frustrating problem came up today. I opened an old FCP project and tried to Export the Timeline (Export > QuickTime Movie). About halfway through exporting, the progress bar disappeared, and an error dialogue popped up. All it said was, "Not found." No specifics about what was "not found," though.
I tried to re-Render the whole timeline (it was fully rendered upon opening the Project) and again got the "Not found" error, halfway through rendering.
I checked the Timeline and the Browser for offline files, but everything that is used in my Timeline appears to be online. I tried to Export the movie both as a Self-Contained File, and not, with the same results.
I even quit FCP and restarted the computer, to no avail.
Can anyone offer advice on what else I should try?
Thank you for your help!
Dual 2 GHz Power PC G5 Mac OS X (10.4.6) 1 GB DDR2 SDRAM

Try FCP rescue. It is a free download. Also update software, rebuild permissions with disk utility, run MacJanitor (also a free download), Reset PRAM. Ensure you have enough free space on the volume you are rendering to.
Can you play the sequence through without any drpooed frames or errors? These might give you a clue a sto where the problem is in your time line. Rarely video files get corrupted and need to be recaptured.
Can you print to video? Errors here can also give you clues to problems.
Hope this helps.
Dave F

Rending problem - "not found!"

When I rendered my sequences with FCP 7, at the end of long time as 2 or 3 hours rendering time,
the message "Not Found!" appeared and I failed rendering. If I render the same sequences again, the same thing happens.
Please let me know why this thing happens and how I can solve this problem.
My sequences are usually more or less 1 hour long.
Last night I didn't sleep at all.
Rending and failure, rendering and failure...
So I rendered the sequence by manually selecting 5 minutes portions so many times in one sequence and at last done.
Please help me about this problem.
Jaehyun from Korea

Why are you rendering? If it is because the material does not match the sequence settings, you should correct that first (then you won't need to render).
If the material is H.264, AVCHD or similar non-native FCP formats, convert them to ProRes (LT is fine for most consumer formats) before you bring the material into FCP.
Either Compressor or Mpeg Streamclip are the standard apps for this purpose.
x

Why are link behaviors working in my render but not my export?

When I export my video, the link behaviors don't behave like they do when I preview the video in the player window. It's like the export feature doesn't even know they're there. What's going on?

Hi Ben, thanks for helping.
I set all of the Render settings as you said, both on the Preview Canvas as well on the Export settings.
My export is still different than my preview. Here are the problems (all link behaviors):
"Link Slit Scan"
Source Parameter: Filters.Insect Eye.Refraction
Apply To: Filters.Slit Scan.Glow
Notes: In the preview, the slit scan is glowing bright white. In the export, it's completely dark.
"Link Halftone"
Source Parameter: Filters.Insect Eye.Refraction
Apply To: Filters.Halftone.Mix
Notes: In the preview, the halftone triggers along with the refraction. In the export, the halftone doesn't exist.
Extra Note: This is the same behavior that keeps changing the target to "Filters.Bad TV.Mix" when I close and reopen the project.
"Link Bad TV"
Source Parameter: Filters.Insect Eye.Refraction
Apply To: Filters.Bad TV.Waviness
Notes: In the preview, the waviness triggers smoothly along with the refraction (when the Bad TV mix is up). In the export, the waviness is jittering out of control.
By the way, Filters.Insect Eye.Refraction is controlled by an audio behavior, but the Refraction itself is working just fine.
I'll check out Ripple Training too. Thanks!

Render will not overwrite files

I have a project which involves generating a number of unique shake scripts. In ironing out the workflow I've discovered that Shake does not want to overwrite an existing file when I render out. Is there some hidden switch I need to set to force file overwrites? At the moment I'm not rendering with a shell script I am doing it from the gui using render of FileOut nodes.
I know this is the case because if I delete the file in question and then go back and select render the new file is there. If I try to rerender again, shake behaves as if it is rendering (flipbook pops up) but when I go to the directory in question, the old file is still there.

This can happen if the file is in use by another application, like Final Cut.
In that case, quit Final Cut before rendering.
It's nice that Shake doesn't tell you there's a problem.

Color Correction -- render does NOT match preview

Something seems very odd about Color Correction.
I select a clip that is too dark. I adjust the slider to lighten it up while previewing. It looks perfect.
Now I APPLY and the rendered video is very different. Typically now way too light.
So I adjust render, adjust render, adjust render. This seems a crazy way to do edit!
Why doesn't the render match the preview?
PS: Sometimes only part of a clip renders with the remainder being black. What's going on?

Hi
Not really knowing.
a. The tool in iMovie HD 6 crude near of no use
b. How do You judge the result. On Your Mac monitor - Not so good just an approx.
I connect my miniDV tape Camera via FireWire
Connect the analog out to a small TV/Monitor
Set in iMovie "Playback via Camera"
This picture on the TV/Monitor is very close to my final product
c. Color-correcting tool in iMovie'08 are better than in previous versions
BUT the link "Playback to Camera" Doesn't exist any longer (MAJOR FAULTH)
d. This made me taking the step over to FinalCut Express with Near Pro tools to
do this. And a setting can be copied and applied to several clips that need same
correction.
Yours Bengt W

Need help with PPro & Speedgrade link - render does not match results

Hello! My problem in a nutshell is that the color correction applied using the speedgrade link once exported does not match the preview montor results in PPro by a fairly large margin.
Process:
Source is AVCHD 60p 28mbps
New sequence to PPRo
Direct link to Speedgrade
Color correct
Send back to PPro
Timeline monitor in PPRo shows correct color correction results from speedgrade
Select and export the timeline (no extra effects added)
Tried MFX 100 Intra, and basic h.264 150mbps MP4
Both rendered out file with incorrect gamma, mushed colors, and missing blacks correction.
Imported both files back into PPro and compared the source montor to the original timeline monitor and they do not match up.
Then I tried exporting directly to a TIFF sequence, and the TIFFs render out with the correct speedgrade look...
So something in the middle of the process in the media encoder is messing up!
Bug probably? Anyone else experiencing this? Are you checking your output results?
-David

Here you go, for the h.264, which is what I normally use.
The visible differences were for example a purple pillow in the shot has its blacks and definition, once exported the purple turns to mush, no blacks and loss of definition, like a bad gain setting.

Opacity and render line not visible

I am currently using premiere cc and my sequences are not showing the yellow render line or opacity filter, it is only showing the FX indicator. How do I get it to display the yellow line and opacity?? I am trying to fade in and fade out with the markers like I was able to in CS6. I've searched but can't find much.
Thanks
David

Dear
For Detail Study about XML ,
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/ee639033-0801-0010-0883-b2c76b18583a&overridelayout=true
Regards
Tushar Dave

To render or not to

Similar Messages

Maybe you are looking for