To restrict Multiple Entries in IT 2006
Hi All,
We are generating the absence quotas using the report RPTQTA00.
Problem is if the some one is running this report multiple times for the same period multiple entries are getting generated with same quota type and same dates. Please advice how to restrict this using standard settings.
e.g.
Report runs for First time
Entry created is
Quota type Days Start date End date
01 10 01012011 31122011
Report runs for Second time
Entry created is
Quota type Days Start date End date
01 10 01012011 31122011
So in IT 2006 there are 2 entries
01 10 01012011 31122011
01 10 01012011 31122011
We want to restrict these multiple entries.
Please suggest.
Regards,
Umesh Chaudhari.
Hi Wilfred Krens,
I thought the same and tried making the changes in the table V_554Y_B with following settings
Infotype 2006
Time Con Class 01
20006 01 E
But problem with this is all the other quota type also have the time constrain as 01 and with the above setting it does not allow to generate an of the quota.
Regards,
Umesh Chaudhari.
Similar Messages
-
Restricting multiple entries in IT 14
Hi Folks,
They are some WT which requires multiple entry ( Time constraint -2)
they are somwagetypes which requires only single entry
but when i tried through the table
V_T582A- this is for the infotype whole infotype level
also tried infotype sub type obligation inthis above table that is also not workig
V_T512Z(permisiblity per infotype) not working
So is there any other way to restrict single entry to wagetype level
Regards,
DeepakHi,
IT0014 is subtype (wage type) driven, you should use table V_T512Z to configure time constraint.
There are no other ways.
Cheers -
FBZP bank determination - restricting multiple accounts
Hi Experts,
Would anyone know why SAP is limiting the number of Account IDs that can be maintained per House Bank in FBZP - Bank Determination - Bank Accounts?
i.e.
Payment Method: C
Currency: PHP
House Bank: XXX1
Account IDs:
CA01
CA02
CA03
FBZP only allows the following entries:
XXX1 C ____ CA01 110123
XXX1 C PHP CA02 110124
SAP is not allowing more than 2 entries with the same HouseBank and PM.
I don't see any risk of allowing the maintenance of multiple entries and I am wondering why this restriction is put up by SAP at all.. Could someone please enlighten me?
ThanksHello David,
You can maintain bank detials with more than two bank IDs but currency should be different.
System will not allow to maintain even more than one ID if currency will be same.
Now the question is why system will not allow more than one IDs if the currency is same.
In Ranking Order you have to maintain,
Payment method, currency, Ranking order and house bank.
Now suppose you enter payment method C for currency PHP keeping ranking order 1 for house bank XXX1 which is having account IDs CA01, CA02 and CA03.
If you will maintain two IDs or more than two IDs for payment method C currency PHP and house bank XXX1 in Bank details, in this case system will not be able to decide the account ID to post due to having the same payment method, currency and house bank.
Hence, SAP does not allow to maintain more than one ID for same payment method and same currency.
Regards,
Mohammed Kalim -
How to pass Multiple entries of select-options to FM
Hi friends,
i need to pass values date_from and date_to of FM BAPI_AR_ACC_GETSTATEMENT in my report. i have select-option in the selection screen for the posting date i.e, s_pstgdate-low = date_from and s_pstgdate-high = date_to.
My question is how to pass values if the user enters multiple entries in s_pstgdate (selection-screen).
Hope i'm clear with my question.
Thanks in anticipation.
Regards
PoornaHi,
This is not possible.
You may wish to call it multiple times with each row of your select-option, and consolidate the returned records.
Better is to restrict the select-option with no-extension.
cheers, -
Im using Call transaction FBB1. I have a output table, by looping it i'm updating that FBB1 so for each record its creating single document. But I need that all the record will be in 1 doc not individual one...SO FOR MULTIPLE entry i have to give entry in SAPMF05A 0330 field which will continue for that next record....how to do it??
RegardsHi,
For that you have populate 2 internal table one with header record other with item record and then you should use nested loop on which outer loop for header record and inner loop on item records but restriction of innerloop should be powered by header table. for example.
loop at ekko.
ebeln
aedat
loop at ekpo where ebeln = ekko-ebeln.
ebeln
ebelp..(will take all item for that po number).
matne
endloop.
endloop.
rewards if helpful.
Regards
Gagan -
Hi,
I have 2 DSO & 1 Cube I need to combine these 3. I can not use multiprovider as keys are different in all 3. I can not do look up on cube. I am trying infoset but getting multiple entries
Structure of DSO1
Key - A1
Key - A2
Key - A3
Key -A4
No Data fiels
Structure of DSO2
Key - B1
Key - B2
Data field - A1
Strcture of Cube
Char - C1
Char - C2
Char - A1
Only common field between these 3 is A1which is key field of DSO1 but when I am joining these 3 Data targets on the basis of IO A1 multiple entries are generated as keys are getting mutiplied.
Is there any solution for my problem?
Regards,
SonalSonal,
You need to restrict the objects to specific Infoprovider in the Query Designer.
Veerendra. -
What causes multiple entries in my calender events in my iPhone 4s?
What causes multiple entries in my calender events on my iPhone 4s?
Hi jeffpetit,
Here is a link that will help you troubleshoot this issue with the camera on your iPhone:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
Batch element raise error for few cases as Multiple entries are not allowed
Dear
Element type :' NON-RECURRING'
Multiple entry :' un-checked'
We have a commission element as non-recurring. As per company policy we allow this commission on Assignment criteria and it got successfully transfer we run it previous month. But today we are doing the same activity and getting error “Multiple entries are not allowed for this entry” in two cases while batch validation. However when we enter this element manually under the assignment element entry window, it allow user to save without any restriction.
So, why system not allow it through batch window.
I am very thank full to you, pls very critical.
Pls advice.User uploaded duplicate assignment for the same element, therefore system was not being allowed to process for that batch. we removed duplicate record and the error was removed.
-
Data in the cube is showing multiple entries when compared with ODS
Hello BW Gurus,
We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
An Example:
Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
Here is the ODS Code:
tables: /BI0/PPRODORDER.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
modify data_package.
endloop.
Here is Cube Code:
tables: /BI0/PPRODORDER,
/BIC/ODS.
TYPES:
BEGIN OF ys_mat_unit,
material TYPE /bi0/oimaterial,
mat_unit TYPE /bi0/oimat_unit,
numerator TYPE /bi0/oinumerator,
denomintr TYPE /bi0/oidenomintr,
END OF ys_mat_unit.
DATA:
l_s_mat_unit TYPE ys_mat_unit,
e_factor type p decimals 5.
loop at data_package.
select single COORD_TYPE
PRODVERS
into (/BI0/PPRODORDER-COORD_TYPE,
/BI0/PPRODORDER-PRODVERS)
from /BI0/PPRODORDER
where PRODORDER = data_package-PRODORDER
and OBJVERS = 'A'.
if sy-subrc = 0.
if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
data_package-PRODVERS = space.
else.
data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
endif.
endif.
if data_package-calday = space
or data_package-calday = '00000000'.
if data_package-TGTCONSQTY NE 0.
data_package-calday = data_package-ACTRELDATE.
endif.
endif.
data_package-agsu = 'GSU'.
data_package-agsu_qty = 0.
select single gr_qty
base_uom
into (/BIC/ODS-gr_qty,
/BIC/ODS-base_uom)
from /BIC/ODS
where prodorder = data_package-prodorder
and material = data_package-material.
if sy-subrc = 0.
if /BIC/ODS-base_uom = 'GSU'.
data_package-agsu_qty = /BIC/ODS-gr_qty.
else.
SELECT SINGLE * FROM /bi0/pmat_unit
INTO CORRESPONDING FIELDS OF l_s_mat_unit
WHERE material = data_package-material
AND mat_unit = 'GSU'
AND objvers = 'A'.
IF sy-subrc = 0.
IF l_s_mat_unit-denomintr <> 0.
e_factor = l_s_mat_unit-denomintr /
l_s_mat_unit-numerator.
multiply /BIC/ODS-gr_qty by e_factor.
data_package-agsu_qty = /BIC/ODS-gr_qty.
ENDIF.
else.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = /BIC/ODS-gr_qty
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = /BIC/ODS-base_uom
UNIT_OUT = 'GSU'
IMPORTING
OUTPUT = DATA_PACKAGE-gsu_qty
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10.
endif.
endif.
endif.
modify data_package.
endloop.
some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
your suggestion and solutions would be highly appreciated.
thanks,
Swathi.Hi Swathi
In ODs we have option of overwriting and addition however in Cube we have only adition.Thats why you are getting multiple enteries.
If you are running daily full load on the cube then please delete the earlier requests.
So at one point of time there should be only one full load request in cube. Hope this will solve your problem.
Regards,
Monika -
Can I combine multiple entries into a single statement?
I am relatively new to Live Cycle so forgive my lack of technical wording.
I would like to use multiple entry fields to fill in a statement.
For example:
I'd like the user to see this:
Target Dropdown Endo Dropdown Type Dropdown Version # Entry Date 1 Entry Date 2 Entry
and then have the form merge all that together into a line that looks like this:
RS_(target)_(endo)_(type)\(version)_(date)_(date)
Preferably without repeating information on the page as we'll have multiple of these entries and the page will get hectic quick.
Is this possible?
I first had each dropdown in individual table fields, but due to regulations we follow the entries need to be merged without spaces.
I always have a backup if this can't be done, but any help is appreciated.Not sure where you're sending it, but if you have a global variable named "bob".
bob.value = "RS_"+target.rawValue+"_"+endo.rawValue+"_"+type.rawValue+"\"+version.rawValue+"_"+date.r awValue+"_"+date2.rawValue;
Something like that should work. -
I got use to using Calendar app where multiple entries are stacked under IOS6. Under iOS7.0.2 I enter a new appointment and after the entry I can not find the new appointment after i click on done. Am I doing something incorrect HELP!
The list view does not appear to be among the "standard views" for the Calendar app in iOS 7.0.x. You can still get the list view by going to the day view and hitting the search button (magnifying glass icon).
-
Picking the value of PBEG and PEND incase of multiple entries 2002 on a day
Hi Experts,
Our client's business requirement is to have provision handling multiple entries multiple entries of same subtype of IT 2002 on same day with different Time entries.For example one IT 2002 Styp 1 has entry 10 am to 14 pm & other entry of IT 2002 styp 1 as 14 pm to 16 pm.
In this scenario I want to have TWT with start time of 1st 2002 record i.e 10 & another TWT with end time of last 2002 record i.e. 16.
I have written a PCR as
OUTTPORIGS Origin status
COLOP* TIP >TOP curr.TType
P
HRS=PBEG Set
ADDDB90T3 Add to day balance
HRS=PEND Set
ADDDB90T4 Add to day balance
But its giving me value of 2002 start time as (1014=24) & END time (1416=30) respectively.
Since TIP will have entries with origin E & A as well with P and any entry can be 1st or last entry depending on time, I can't use VRSTFIRST & VARSTLAST.
Please suggest me how to handle such scenario through PCR. Is there a way we can make decision on From & To of TIP entries.
You can also suggest me if such need can be handled at masterdata level so that we can have just one entry
Regards
S S
Hi All,
Please also suggest me a better operation to pick the value of PBEG and PEND incase of multiple entries various subtypes of 2002 on same day.I need to compare start- end time of 2002 with 2011 entries and calculate total attendence hrs. Once again, I can't use VRSTFIRST & VRSTLAST as 1st & last TIP entry could be come from any infotype viz 2011,2002, 2001.
Regards
Sunita
Edited by: Sunita on Feb 5, 2011 10:02 AMIf you want to do it the T-SQL way, follow this article I wrote on deleting duplicates..
http://sqlsaga.com/sql-server/how-to-remove-duplicates-from-a-table-in-sql-server/
To read about what ranking functions does and how will they help you use this link..
http://sqlsaga.com/sql-server/what-is-the-difference-between-rank-dense_rank-row_number-and-ntile-in-sql-server/
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles. -
Restrict multiple log in with same user ID
I have a JSF Project where I use Oracle JAAS for Login.
The login works perfectly and also the components on the JSF page shows as per User Role. I am using OAS 10.1.3.3.
I want to now implement the code so as to restrict simultaneous logins with the same user id. That is a user id cannot be looged in at once to the server from more than one machine.
The login.html is:
<form name="loginFrm" method="post" action="j_security_check">
<p>Log in to access restricted zone.</p>
<table>
<tr>
<td>User name</td>
<td>
<input id="j_username" type="text" name="j_username"/>
</td>
</tr>
<tr>
<td>Password</td>
<td>
<input type="password" name="j_password"/>
</td>
</tr>
<tr>
<td> </td>
<td>
<input type="submit" value="Login" onclick="document.body.style.cursor='wait';"/>
</td>
</tr>
</table>
</form>The securityconfig int he web.xml file is:
<login-config>
<auth-method>FORM</auth-method>
<realm-name>jazn.com</realm-name>
<form-login-config>
<form-login-page>/login.html</form-login-page>
<form-error-page>/loginError.html</form-error-page>
</form-login-config>
</login-config>
<security-role>
<role-name>ADMINISTRATOR</role-name>
</security-role>
<security-role>
<role-name>MANAGER</role-name>
</security-role>
<security-role>
<role-name>INSURER</role-name>
</security-role>
<security-role>
<role-name>TRACKER</role-name>
</security-role>
<security-role>
<role-name>INSURER_MANAGER</role-name>
</security-role>Then I would say it is not possible: Restrict multiple login in SAP Business Objects 4.0 SP6 for single user
multiple login disable in BO | SCN -
How to restrict multiple ess session and access?
Hi experts,
how to restrict multiple session for ess user? and multi access for same ess user?
our problem is when user login to ess (doing session, for example leave request) and at the same time their manager is accessing travel approval task for that user, the approval process getting error. (we use travel workflow to approve travel request)
how to overcome this situation?
thanks.but there is no information on ESS screen for user being lock.
how to show the information on ess screen?
thanks -
Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''<u>may</u>''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''<u>but use IE</u>''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''<u>Download link and other information</u>''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
Maybe you are looking for
-
I am spitting nails After all the STUPID problems outlined here https://support.mozilla.org/en-US/questions/999831?esab=a&s=&r=0&as=s I set Firefox to stop auto updating, Then the other day I installed a new user on my laptop, when they loaded Firefo
-
Mail with Address Book & iCal, compared to Outlook 2011. What to do?
Suffice it say, if other conditions permitted, I might do away with both Apple & Microsoft's toolsets and go with a complete, cloud based business management app-Google or otherwise. I graduated from Entourage in Office 2004 to Mail, iCal, Address Bo
-
1st gen iPod incompatible with Leopard?
I have a 5GB gen. 1 iPod which still works fine. However, when I hook it to a Mac running OS 10.5.7, it slowly goes to heck, taking the whole FireWire buss down with it. I then have to power everything off, unplug power to all FW devices, and reboot
-
Change STB name in Mobile Remote
Is there a way to change the STB name in Mobile Remote? Currently, they show up as STB1, STB2, STB3 and STB4. I would like to be able to name them the way I have on the 'My Verizon' page as Living_Room, Den, Bedroom, Basement.
-
Question/Problem with BAPI_ACC_DOCUMENT_POST in TAXACCOUNT with TAX_CODE
Hi all: I've got a problem when I use bapi BAPI_ACC_DOCUMENT_POST. The vendor accounts with general leader accounts associated are implemented in the position of table ACCOUNTPAYABLE and the general leader accounts go to table GLACCOUNT. Refering to