To Retreive Deleted datasource-VERY URGENT

Hi BI Gurus,
There was a requirement for us to delete one cube.
By mistake we have deleted the datasource and the transfer rules related to that cube, but that datasource is used by some other cubes also.
Please let me know the possible ways of retreving the datasource and the transfer rules and this is not transported yet.
Thanks in advance.
Kind Regards,
Raghu

If you have saved your Transfer rules few days back then there is a slight possibility to get it. I am not sure if it will work.
Ask your basis team to take a back dated restore of the system. The date should lie betwwen the date you saved and activated your transfer rules and the date you deleted the DS.
But mind you, when you restore the system on a particular date, the henceforth developments will go away.
Regards
Gajendra

Similar Messages

Need help, MMC tree got deleted, very urgent.

Hi,
My sap MMC tree, got deleted in the server. I have been trying to restore since 2 days and couldnt succeed, please help me.
1) i have uncared the sapmmc.sar from   Kernal\NT\I386\MMC\sapmmc.sar file
2) i got about 7 files, in which there is one sapmmc file i have tried to double click it, n check but no go.
3) i also tried to run the Sapstartsrv.exe file and fill in up the values in pop up window. & filled up the following values :-
                    SID: DEV
                    NR: 00
                    StartProfile: (entire start profile path given)
                    user: devadm
                    passwd; (given)
- but it says "the account name is invalid or does not exist or the password is invalid for account name specified"/
- no go in both the cases.
Please need help very urgent.
Regards,
Satish.

siva,
I am getting same error since 2 days
SID: DEV
NR: 00
Start Profile: (entire start profile path)
User: <hostname>/devadm
passwd: ****
Error:
cannot install service
create service failed:421
The account name is invalid or doesnot exist, or the passwd is invalid for the account name specified.
Edited by: satish c on Jun 4, 2008 11:12 AM

Very Urgent: Deleting Batch from STO and Goos Issue reversal Using BAPI

Hi,
I want to delete outbound delivery for particular shipment number and this should be done using BAPI or a FM not using the tcode VL02N.
I wld be very grateful
Please List out the BAPI 's or FM that can be used for to perform these listed , with using Tcodes:
1) REVERSE BILLING DOCUMENT(VF11)
2) GOODS ISSUe REVERSAL (VL09N)
3) REMOVE DELIVERY FROM SHIPMENT (VT02N)
4) DELETING DELIVERY(VL02N)
5) REMOVE BATCH FROM STO (ME22N)
Its very urgent..
Thank you in advance....

1) REVERSE BILLING DOCUMENT(VF11)
BAPI_BILLINGDOC_CANCEL
2) GOODS ISSUe REVERSAL (VL09N)
BAPI_GOODSMVT_CANCEL
3) REMOVE DELIVERY FROM SHIPMENT (VT02N)
BAPI_SHIPMENT_CHANGE
4) DELETING DELIVERY(VL02N)
5) REMOVE BATCH FROM STO (ME22N)
BAPI_PO_CHANGE

HT202786 my friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)

my friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)

DVDs are encoded into MPEG2, which iMovie cannot edit. So you need to convert the DVD back to something else. For highest quality, I recommend that you convert the DVD to Apple Intermediate Codec. There is a free tool called MPEG Streamclip that will do this. You will also need to install the Apple QuickTIme MPEG2 Playback Component.
Here are the details.
1) Download and install the Apple MPEG2 QuickTime Component ($20) - available online from Apple.
2) Download and install MPEG Streamclip from Squared 5 (free).
3) Start MPEG Streamclip
4) Insert your DVD into your Mac. If DVD Player or Front Row starts automatically quit those.
5) Open a Finder window. Navigate to your DVD to the Video_TS folder.
6) Drag the .VOB files from the Video_TS folder and drop then into MPEG Streamclip.
7) If MPEG Streamclip offers to fix timecode breaks, say yes.
8) Use FILE/EXPORT TO QUICKTIME to convert the files to Apple Intermediate Codec (or h.264 if you prefer)
9a) Optional: You can deinterlace your footage in this step, if you like
9b) optional: If you know the date and or time of the footage, name your file
clip-yyyy-mm-dd hh;mm;ss
(let mpeg streamclip provide the extension). This will provide metadata that iMovie will use to put the event in the right year and month.
9c) Optional: If you don't want to make one huge clip out of your DVD, you can make smaller clips by using MPEG Streamclip. Move the cursor to the "in" point of the clip, and press i. Move the cursor to the "Out" point of the clip, and press o. Then do steps 8 through 10 and repeat until you have done this for all clips you want.
10) Save the resulting file in a place where you can find it, like your Desktop.
11) Open iMovie.
12) In iMovie, choose FILE/IMPORT/From File and choose the file you saved in steps 8, 9, 10.
13) iMovie will generate thumbnails and you can edit.

My friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)

my friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)

Welcome to the Apple Community Diane.
I find that shared video can be troublesome, a few haven't appeared to work as you describe but have done when I've looked at a later date. Hopefully they will work if you give them a bit longer. perhaps it would be a good idea if you make sure they are working before deleting them from the camera roll.

Please i need help very urgent !!! after deleting my exchange account because the company changed the password , I lost 150 200 contacts and i need to get them back very soon ! please help

Please i need help very urgent !!! after deleting my exchange account because the company changed the password , I lost 150 200 contacts and i need to get them back very soon ! i never backed up on itunes ..please help

No. The contacts are "owned" by the Exchange server.
The Exchange server is owned by the company.
Everything on the Exchange server is owned by the company.
If you quit or were terminated, and your access to the system has been revoked, then there is nothing you and do at this point. Once you deleted the account from your phone, all of the associated data was deleted.
NEVER store personal information on company systems.

Delete data dynamically with JSP and servlet (Very Urgent)

Hi,
I am new with servlets and JSP. On my jsp page I am populating customer names in a drop box from database and I have 3 buttons ADD, DELETE and EDIT.
Now when I press DELETE buttong I am calling delete function which is writen in Javascript on my jsp file only,now I want to pass these selcted values ehich I have stored in an array to be pass to servlet,so I can write Delete query for it and delete.
Could anyone help with sample code>
Here what I am trying to say:
<HTML>
<HEAD>
<script language="JavaScript" type="text/javascript">

</script>
</HEAD>
<BODY>
//calling servlet on action tag of form
<FORM METHOD= 'POST' ACTION='Remove_Customer'>
<form ><INPUT TYPE='submit' NAME='DELETE' VALUE='DELETE' onclick="remove()"></TD></form>
<form><INPUT TYPE='submit' NAME='MODIFY' VALUE='MODIFY' onclick="modification()" ></TD></form>
</BODY>
</HTML>
PLEASE HELPME,it's very urgent.
Since the selected Array is in javascrip language , I don't know how can I pass that to servlet.
request.getParameter is not working,since it's an array
Many thanks in Advance.

Hey,
I am having problem deleting multiple values.
If I just select one value,it deletes it
But for multiple values the code is not working right.
If there 2 values selcted then the last value gets deleted,if there are more than 2 values selected none values delete.
Could plese check the code,and let meknow what mistake am I doing?
Please help
String delName="";
int pos = tStr.indexOf(",");
System.out.println(pos);
     if (pos != -1)
               delName = tStr.substring(0, tStr.indexOf(","));
          tStr = tStr.substring(tStr.indexOf(",") + 1 );
               System.out.println("DElName:"+delName);
               System.out.println("tStr::"+tStr);
                    delName = tStr;
                    delete_Customer(delName);
Thanks
ASH

How to write code for this logic, plz help me very urgent

Hi All,
i am new to sap-abap, i got this work and i m working on this can any body help me in writing code, plz help me, this is very very urgent.
here i m giving my logic, can anybody send me the code related to this logic.
this is very urgent .
this program o/p should be in ALV format and need to create one commond 'SAVE" on this o/t list if user clicks save processedon and processedby fields in ZFIBUE should be updated automatically.
i am creating one custom table zfibue having fields: (serialno, bukrs, matnr,prdha,hkont,gsber,wrbtr,budat, credate, cretime,processed, processedon, processedby,mapped)
fields of zfibue:
serailno = numc
bukrs = char
matnr = char
prdha = char
hkont = char
gsber = char
wrbtr = char
budat = date
credate = date
cretime = time
processed= char
processedon = date
processedby = char
mapped = char      are   belongs to above type data types
and seelct-optionfields: s_bukrs for bseg-bukrs
                                    s_hkont for bseg-hkont,
                                     s_budat for bkpf-budat,
                                     s_processed for zfibue-processed,
                                      s_processedon for zfibue-processedon,
                                      s_mapped. for zfibue-mapped
parameters: p_chk1 as checkbox,
                  p_chk2 as checkbox.
                  p_filepath type rlgrap-filename.
1.1 Validate the user inputs (S_BUKRS and S_HKONT) against respective check tables (T001 and SKB1). If the validation fails, provide respective error message. Eg: Invalid input for Company Code.
1.2 Fetch SERIALNO, BUKRS, MATNR, PRDHA, HKONT, GSBER, WRBTR, BUDAT, CREDATE, CRETIME, PROCESSED, PROCESSEDON, PROCESSEDBY, MAPPED from table ZFIBUE into internal table GT_ZFIBUE where BUKRS IN S_BUKRS, HKONT IN S_HKONT, BUDAT IN S_BUDAT, PROCESSED IN S_PROCESSED, PROCESSEDON IN S_PROCESSEDON, and MAPPED IN S_MAPPED.
1.3 If P_CHK2 = X, go to step 1.11. Else continue.
1.4 If P_CHK1 = X, continue. Else go to step 1.9
1.5 Fetch MATNR, PRDHA from MARA into GT_MARA for all entries in GT_ZFIBUE where MATNR = GT_ZFIBUE-MATNR.
1.6 Sort and delete adjacent duplicates from GT_MARA based on MATNR.
1.7 Loop through GT_ZFIBUE where PRDHA = blank.
          Read Table GT_MARA based on MATNR = GT_ZFIBUE-MATNR.
          IF sy-subrc = 0.
                 Move GT_MARA-PRDHA to GT_ZFIBUE-PRDHA.
              Modify Table GT_ZFIBUE. Update Product Hierarchy
             Endif.
    Fetch PRDHA, GSBER from ZFIBU into GT_ZFIBU for all entries in GT_ZFIBUE where PRDHA = GT_ZFIBUE-PRDHA.
    Read Table GT_ZFIBU based on PRDHA = GT_ZFIBUE-PRDHA.
          IF sy-subrc = 0.
                 Move GT_ZFIBU-GSBER to GT_ZFIBUE-GSBER.
              Move X to GT_ZFIBUE-MAPPED.
              Modify Table GT_ZFIBUE.
             Endif.
Endloop.
1.8 Modify database table ZFIBUE from GT_ZFIBUE.
1.9 Fill the field catalog table GT_FIELDCAT using the details of output fields listed in section Inputs/Outputs (above).
   Eg:                 LWA_ FIELDCAT -SELTEXT_L = 'Serial Number.
                          LWA_ FIELDCAT -DATATYPE = NUMC.
                          LWA_ FIELDCAT -OUTPUTLEN = 9.
                          LWA_ FIELDCAT -TABNAME = 'GT_ZFIBUE'.
                          LWA_ FIELDCAT-FIELDNAME = 'SERIALNO'.
          Append LWA_FIELDCAT to GT_FIELDCAT
Note: a) The output field GT_ZFIBUE-PROCESSED will be editable marking INPUT = X in field catalog (GT_FIELDCAT).
         b) The standard ALV functionality will be used to give the user option for selecting all or blocks of entries at a time.
         c) The PF-STATUS STANDARD_FULLSCREEN from function group SLVC_FULLSCREEN will be copied to the program and modified to include a SAVE button.
1.10 Call the function module REUSE_ALV_GRID_DISPLAY passing output table GT_ZFIBUE and field catalog GT_FIELDCAT. Additional parameters like I_CALLBACK_PF_STATUS_SET (= ZFIBUESTAT) and I_CALLBACK_USER_COMMAND (=HANDLE_USER_ACTION) will also be passed to handle user events. Go to 2.14.
1.11 Download the file to P_FILEPATH using function module GUI_DOWNLOAD passing GT_ZFIBUE.
1.12 Exit Program.
Logic to be implemented in routine Handle_User_Action
This routine will have the following interface:
FORM Handle_User_Action USING r_ucomm LIKE sy-ucomm
                                                           rs_selfield TYPE slis_selfield.
ENDFORM.
Following logic will be implemented in this routine:
1.     If r_ucomm = SAVE, continue. Else exit.
2.     Loop through GT_ZFIBUE where SEL_ROW = X. Row is selected
a.     IF GT_ZFIBUE-PROCESSED = X.
i.     GT_ZFIBUE-PROCESSEDON = SY-DATUM.
ii.     GT_ZFIBUE-PROCESSEDBY = SY-UNAME.
iii.     MODIFY ZFIBUE FROM work area GT_ZFIBUE.
Endif.
Endloop.

Hi Swathi,
If it's very very urgent then you better get on with it, don't waste time on the web. Chop chop.

Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!

Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!

That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs          1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI          5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav          8.0.14
org.virtualbox.kext.VBoxNetAdp          4.2.16
org.virtualbox.kext.VBoxNetFlt          4.2.16
org.virtualbox.kext.VBoxUSB          4.2.16
org.virtualbox.kext.VBoxDrv          4.2.16
com.logmein.driver.LogMeInSoundDriver          1.0.2
com.Greatdy.driver.SystemAudioCapture          1.0.0
com.apple.filesystems.smbfs          1.7.2
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleMikeyDriver          2.2.5a5
com.apple.driver.AGPM          100.12.75
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleSMCPDRC          5.0.0d8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics          7.3.2
com.apple.driver.AppleBacklight          170.2.2
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleUSBTCButtons          227.6
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
com.apple.driver.AppleUSBTCKeyboard          227.6
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AppleFWOHCI          4.9.0
com.apple.driver.AirPort.Brcm4331          561.7.22
com.apple.driver.AppleSDXC          1.2.2
com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.driver.DspFuncLib          2.2.5a5
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.2.5a5
com.apple.iokit.IOHDAFamily          2.2.5a5
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleGraphicsControl          3.1.33
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB          7.3.2
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.kext.triggers          1.0
com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
com.apple.iokit.IOBluetoothFamily          4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMultitouch          230.5
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.0.3
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IOFireWireFamily          4.4.8
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IOEthernetAVBController          1.0.1b1
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4

Duplicate records found while loading master data(very urgent)

Hi all,
One infopackage in the process chain failed while laoding the master data(full update).Its showing the following error-->duplicate record found ..1 record used in /BI0/PTCTQUERY and the same record occured in /BI0/PTCTQUERY tables.
can anyone give me the solution...its very urgent...
Thanks & Regards,
Manjula

Hi
You can see the check box in the Processing tab page. Make a tick mark for the check box Ignore Duplicate Data Records indicator . When multiple data records that have the same key are transferred, the last data record in the request is updated to BI. Any other data records in the request with the same key are ignored.
Help says that:
To maintain consistency, ignoring duplicate data records is only possible if the data is updated serially. A serial update is when data is first updated into the PSA then, after it has been successfully written to the PSA, it is updated into the master data or text tables of the InfoObject.
If a DataSource transfers potentially duplicate data records or if you manually set the Ignore Duplicate Data Records indicator, the PSA Only update type is automatically selected in the scheduler.
hope it clears ur doubt, otherwise let me know.
Regards
Kiran

Upload file in clustered environment- Very Urgent

Hi,
My requirement is to upload a file onto the WebServer and also list out the file names on the front end and provide a funcionality to delete them from the server.
Environment Details:
-Product: WebSphere Portal
-Type - Clustered Enviroment with 2 nodes
-Framework: JSF
The problem I am facing here is:
1) I login to the application using a common URL: Say abc.com/wps/portal
2) I dont know which node I am logged into, it can be either Primary(X1) or Secondary(X2).
3) I click on the browse button and select a file and click on the Upload button. The file is uploaded successfully on say primary node X1.
4) I can at that time read the name of the file and display it on screen and also select and delete it. But if I log off and login again and say I am now redirected to secondary node, I am not able to read the name of the file I uploaded as it is stored on the primary node.
Can some body provide me a solutions to this.
What I can think of is , While uploading the file, I will check if I am on the primary node or secondary node and Upload the file only on one node rather than uploading them on both. Say uploading only on primary node X1, Now if I am logged into primary I can just mention the directory name and upload it.
But I f am on the secondary node I need to upload the file on the primary node using URL connection.
Can some body tell me the feasibility of this approach ?? Also how do I upload a file on a remote machine(Logged into the secondary but putting the file onto the primary node.) ???
Please help me this very very urgent.
Thanks.

Hi!
I would simply use a network share which is accessible from both nodes as storage. This way you don't have to care to which server the file is uploaded too, because both share the same filesystem.
If you are on windows, simply share a folder and access it from both nodes. In Linux I'd suggest using samba & mount, on solaris use share & mount.
Another approach would be to use a database as storage.
hth Chris

HT201317 I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help

I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help

Photo stream only keeps photos in iCloud for 30 days, even though up to 1000 photos will remain on your device until you delete them (such as by restoring your phone). When you turned on photo stream again you only got back the photos added in the last 30 days as the others have already been removed.
If the missing photos were still in your camera roll when you last backed up, restoring the backup should recover them. (The backup includes camera roll photos but not photo stream photos.)

How to go about with a finance project in BW - very urgent

Dear Guru's
As i need to extract the data from R/3 for the first time, how should i decide to go for extractors. those are financial datas. should i go to COPA or FISL or Generic Extraction. how to proceed with, kindly help me in this regards, it's very urgent.
Thanks and Regards
C.S.Ramesh
Edited by: cs ramesh on Feb 14, 2008 6:12 PM

Hello Ramesh,
Please find the links of the datasources,Infocubes etc
5. Business Analytics to be available at single click of a button giving important business insights such as
a. Vendor wise expenditure
b. Customer wise revenue
[Customer / Vendor Analysis (FI-AP & FI-AR)|http://help.sap.com/saphelp_bw33/helpdata/en/ea/cd143c5db89b00e10000000a114084/content.htm]
c. Revenue streams for varying time windows (monthly, quarterly, annually)
d. Comparison reports (against similar time windows)
e. Category wise expenses
[General Ledger Accounting |http://help.sap.com/saphelp_bw33/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm]
f. Statistical reports (highs, lows, averages etc)
1. [Overhead Cost Controlling|http://help.sap.com/saphelp_bw33/helpdata/en/83/7593020c9b9d468746a2e4a132838b/content.htm]
Statistical key figure analysis
Thanks
Chandran
Edited by: Chandran Ganesan on Feb 14, 2008 8:59 AM

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

Generic Data Source Creation (Very Urgent)

Hi Friends,
I am getting errors while i am creating Generic Data source using Table "ECMCT" .This table contains all fields which is required for my Data Source.
---> I gave <b>ECMCT</b> table in "Extraction from DB view " but when i click save its showing error message "INVALID EXTRACT STRUCTURE TEMPLATE ECMCT OF DATASOURCE ZFI_ECMCT(is name of my data source)".
> I created Function Module using this Table.
In Function Module "Tables tab"
i gave "ITAB LIKE ECMCT".
In "Source Code tab"
i gave "SELECT * FROM ECMCT INTO TABLE ITAB".
In RSO2 "Extraction Using Function Module"
i gave FM name and Extract Structure name as ECMCT. After clicking save its showing ERRORS:
1) ZFI_ECMCT(is my data source name) : Tables parameter E_T_DATA for Extractor ZFI_CONSOLIDATION(is my Function module)
2) Units field CURR1 for feild HSLVT of datasource ZFI_ECMCT is hidden.
3) ......................................HSL01.....................................................
4)........................................HSL02...................................................
;etc.
Could u anybody suggest me where i am doing wrong. This is very very urgent for me.
Thanks,
Mani.

Hi,
For " Extraction Using Table" the system does not create an extract structure automatically if the Amount field (type CURR) and currency key field (type CUKY ) are in different tables . Hence u create a View of the data table and the reference table (Say PA0002 and T001) wherein, include all the fields from PA0002 and just the referenced fields from T001 so that all the fields come under the view.
But if the above solution is not possible say for ex. if the key fields don't match , then u should go for function modules.
Regards

To Retreive Deleted datasource-VERY URGENT

Similar Messages

Maybe you are looking for