To retreive the Maintenance Cycle for a Maintenance Package

Hi All,
I am trying to retrieve the 'Maintenance cycle' for a Package in the Maintenace package of the Maintenance strategy.
I tried table T351P, but except 'Maintenance Cycle' i can see all other fields.
In IP11 and in IP03 transactions i can see the Maintenace cycle field in the grid where maintenance packages are listed.
But could not find a way to retrieve the maintenance cycle.
Appreciate if you guys could help me out in getting the Maintenance Cylce.
Cheers,
Jaffer Ali.S

Hi,
Check the table MMPX Maintenance cycle short texts .
Regards,
Ankur Parab

Similar Messages

ChaRM: Several maintenance cycles in one maintenance project?

Hi!
We are working with urgent correction within ChaRM and thinking about to implement the normal corrections as well.
Our ChaRM workflow for normal corrections is characterized by:
a)corrections with different Life cycle (those who will be processed within 1 week, other with 2 week, etc.)
Questions:
1) Is it possible to have several maintenance cycles for one maintenance project to handle condition u201Ca)u201D?
2) What will happen with all the normal corrections and urgent corrections that have a long life cycle (status: in development, test, etc.) when the charm manager set the status of maintenance cycle in u201CGo liveu201D?
Thank you very much!
H. Thomasson

Hi Holger,
Maintenance cycle and SMI project is a 1:1 relationship.
In status GoLive you will be able to continue developement/work on normal corrections but you will not be able to release any transport requests/create transport of copies so your testings in QA will be limited.
In phase GoLive you are able to import requests into production.
Normal Corrections which have not been released yet are not lost. Depending on your scenario you may switch phases back to "in dev with rel." after you imported into production. It is not necessary to close and recreate maintenance cycles if you use one project for daily/weekly maintenance.
/cheers

Not able to complete Maintenance Cycle in CHARM Maintenance Project

Hi,
While completing the CHARM Maintenance Project, getting following error:
"Error RFC destination
/TMWFLOW/TL_COMPL_CHK_TR_WO_TL: New Maintenance
Cycle M000000177"
Because of this error I am not able to complete the Maintenance Cycle, i.e. not able to change the status of Maintenance Cycle to 'Completed'
Regards
PK

hi PK
please refer the posiblities on
[cannot close maintenance cycle|Cannot Close Maintenance Cycle in CHARM;
jansi

What is the implementation cycle for Pharmaceuticals & Chemicals industry

i am preparing for the interview. could anybody help me by telling the implementation cycle for Pharmaceuticals & Chemicals industry.
i know the cycle of manufacturing company.
thank you.

ASAP Methodology:
Project Preparation:
The first step in ASAP is Project Preparation. In this step the Functional Consultant will analyse the business process and define the system for SAP and will give the time line for the project. The Manpower required and the budgets are also considered in this step.
Blue Print Preparation:
This is second step in ASAP Methodology. In this step the Project Preparation scenarios are finalised. A out line of the Project is given in this step.
Realisation:
In this step actual development is taken place. The ABAPer is responsible for this step.
Testing:
In this step the development done by the abaper is being tested. This is the area where the Unit Test Document is prepared (i.e. Positive Testing and Negative Testing).
GO live and Support:
This is the final stage where the project is running in the live environment. In this step the bugs if any that are found in the go live procedure are fixed and the project will be considered as support project.
Rewards if useful.

What are the standard tables for plant maintenance in r/3

I need the list of standard tables for plant maintenance in r/3. and also
is there any way we can find the field name and table which it belongs to in r/3, based on the description of the field.

I NEED THE FIELD NAMES FOR FOLLOWING FIELDS AND CORRESPONDING TABLE NAMES
Equipment status
registration number
insurance type
insurance type description
registration date
expiry date
insurance companies
expiry date
policy number
amount insured
premium paid
created by ..so ..on
for our report in PM .. insurance data report
THANKS

Change/restart start of cycle for strategy maintenance plan MPLA- STADT

Dear experts,
is it possible to change the start of cycle date in strategy maintenance plan (MPLA- STADT).
The start of cycle was entered incorrectly into the strategy maintenance plan (IP42)
Maint. plan was already started
...and called: Service orders are already created
The existing maint. plan should be used with a new cycle start date.
By using u201Crestartu201D in IP10, a new start of cycle date is entered and the orders are called correctly.
But the cycle start date is not updated in the data base: MPLA- STADT
Why?
Regards,
Philipp

Dear all,
I opened a OSS message. SAP replied that this is not covered by SAP standard. so system works as designed.
SAP:
The described behaviour is the SAP/R3 standard and works as designed.
IP16 only shows this field if it's updated in MPLA-STADT.
The 'Cycle start' resulting of scheduling (IP10) is kept in the table
MHIS (field STADT).
Transaction IP16 takes data from MPLA and does not read the entries
in MHIS. The only value that can therefore be shown as 'cycle start'
is the original value as recorded in MPLA.
Well, this explains why system behaves like it does.
But in my eyes this is not the correct system behavior.
If a maint. plan is restarted, future calls will be calculated based on
the new cycle date - what is ok.
But IP16 indicates the old cycle date!
In my eyes this is not correct because the list will show an incorrect
cycle date.
I was told to take a look at note 11:
Sehr geehrte Kundin, sehr geehrter Kunde,
die von Ihnen benötigte Funktionalität ist leider nicht im SAP-Standardsystem enthalten.
Wenn Sie mit SAP an zukünftiger Produktfunktionalität arbeiten möchten, empfehlen wir Ihnen, dies entweder über die Mitarbeit in einer SAP Anwendergruppe oder über die Mitarbeit in einer der SAP Communities of Innovation zu tun. Eine Liste aller SAP Anwendergruppen finden Sie unter http://www.sapusergroups.org.
Eine Beschreibung der SAP Communities of Innovation können Sie unter http://www.sap.com/ecosystem/communities/index.epx einsehen.
Alternativ können Sie spezielle, von Ihnen gewünschte Funktionalität von SAP Custom Development entwickeln lassen (http://www.sap.com/services/bysubject/customdev).
Weiterführende Informationen finden Sie unter http://service.sap.com/rollin.
Mit freundlichen Grüßen
Ihr SAP Active Global Support
How can I trigger such an improvement?
Regards,
Philipp

Maintenance history for Routine Maintenance Orders

Hi I want to know where the work order history to be entered for the Functional Location for future reference and analysis for a routine maintenance order. Normally for routine maintenance we dont raise notification and directly order is created from the maintenance plan/item. Please reply.

Depends on how you plan to use that history. If you need to do data analysis of this history then may be you should use the notification by creating it. If it is just to record info then I feel that entering the explanation in the long text during time confirmation or in the order header etc.. should be good. I feel the first option is good. Try it. If u find it too cumbersome then shift over to the second. Right now I can only think of these two.
thanks
Bala

What is the upgrade cycle for DW?

I have an older version of DW and would like to get DW CS4, but don't want to if CS5 is coming out soon. Can someone tell me when to expect this to happen?
Thanks.

Well just remember Adobe's policy is that you can only upgrade from the previous 3 versions. So if you have a version prior to MX 2004 you will not be able to upgrade to even CS4. If you have MX2004 though, CS4 is the last version you will be able to buy at the upgrade rates. After that you must buy another full license. If you have 8 or CS3 you can hold off. It will be released this year and betas for other applications like Flash were stopped to push the public release out sooner, but no definitive date(s) have been announced yet.

Multiple system maintenance cycles are not shown in pop up for selection

Hi,
In change manager, when we create a change document from a change request, we dont get a pop up for selection of maintenance cycles with multiple systems in it.
The change document is getting created by taking the only available maintenance cycle with only that system.
Is there any configuration for this?
Regards,
Dipti Sawarkar.

Hi Christian,
Thanks for your reply.
I know the pop up will come only when there is more than one maintenance cycles for that production system.
I have done configuration for Normal correction.( SDMJ) and customized it (ZDMJ).
When I try to create a CD* from CR* for a particular production system ( CCP) , it just takes up a maintenance cycle for CCP system and doesnt show up any pop for selection of maint cycles whereas I have created 5 maintenance cycles for this system CCP.
The other 4 maintenance cycles have multiple landscapes (CCP and EAP )in it whereas this one (which gets selected by default) just has CCP landscape in it.
The strange part is that when I try to create a stand alone CD ( without CR ) , it will give that pop up showing all 5 maint cycles. But this is not happening when I create a CD from a CR.
I have never done/ seen configuration for the pop up of selecting maint cycles in ChaRM.
Looking forward to ur help,
( *CD - Change Document and * CR - Change Request)
Regards,
Dipti Sawarkar.

Question on normal maintenance cycle in 4.0

Hi
We have a maintenance cycle for normal corrections. Due to missed authorizations, when our testers changed the status of the change request after successful testing, the status is changed to 'consolidated', but the transport requests were not released. When we manually released the transports from SCMA task list, system released all the open transport requests, whose tasks are released. This has caused the issue of these transports being added to the production buffer. So now we have the released transport requests for requests that are at the consolidated status and for requests whose status in less than the consolidated status, i,e. to be tested, in development. If the status of the MC is changed to 'Go-Live' and when the production import job is scheduled, is it going to move all the transports in the production buffer or only those transports that have the corresponding change request status is 'Consolidated'? Thanks in advance.

I believe that in later Service Packs of SolMan 4.0 the "Export transport request" and "Return to development" actions described in note 910506 are not part of the standard workflows so some of these problems should not exist. SolMan uses Transport of Copies functionality when the developer performs the Complete Development action. These "copy" transports only get imported into the QA system and not into production. When the tester performs "Confirm Successful Test", the transport is actually released.
Now if for some reason the tester made a mistake when "Confirming", the correct action would likely be to do an Urgent correction to repair the problem or undo the change.

Split one maintenance cycle in four

Hello,
We currently use SLFN with 1 maintenance cycle, for 4 productive systems.
We want to close this maintenance cycle, and create 1 maintenance project/cycle for each production system.
Is it possible to transfer the SLFNs that are still opened after the 1st one is closed, to the 4 new cycles?
I could only find that SLFNs are automatically reassigned to a new maintenance cycle on the same project they were created on.
Thanks.

Hello,
I think that a split is not possible - but I may be wrong.
There is a workaround for all open corrections with transport requests and transport tasks, which have not been released:
You're able to create new corrections via ChaRM and reorganise the transport tasks: they can be assigned to other transport requests. After reorganisation, the ("empty") corrections, which were created before, can be rejected.
(It doesn't work for released transport tasks.)
Best regards
Horst

Set Change to 'Development' : ERROR: No maintenance cycle

Hello,
i have customized the change management scenario in SolMan 4. Now that I have approved a change request I want to set the change to 'development'. But the error No Maintenance Cycle appears.
I have assigned a maintenance project to my Solution. I have actived the change management in the maintenance project, but as i wanted to push on the create task list button the message appears that my project ist not released yet, cycle can not be created.
Please could you explain me how to create a maintenance cycle, what are exactly the necessary steps and why I need a maintenance cycle, for example for creation of a new user??
Thank you in advance!!
Regards
Marcus

Hi Ausra,
Please, take a look at this topic:
Change Request Management scenario: Usual questions and known errors
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
17. Error: "No maintenance cycle is opened for the current system"
Best Regards,
Fernando Rocha

MRP VIEW For Plant Maintenance

Hello friends,
My Client require Minimum Stock of Spare Parts in Maintenance Store and when ever the minimum reserve quantity hit an automatic PR will generate and the purchase deptt. can Procure. so what will be the MRP View for Plant Maintenance in this scenerio and what will be the configration.
Thanks
Neeraj Gupta
Edited by: neerajj0 on Jun 11, 2010 11:33 AM

Hi,
Material Master will be maintained by MM people. For Spare parts, material type would be ERSA. Maintain the MRP type for Reorder Point Planning in MRP1 view of Material Master & Reorder Point Qty in MRP1 view.
While running MRP, spare parts also will be planned.
Regards,
Maheswaran.

Planning for plant Maintenance and CS (MCB)

Hi there
We are looking into implementing the Budtet Planneing for Plant Maintenance and Customer Service (MCB). However vi lack som information regarding the complexicity in this solution.
Does anybody knowledget about the time and resources needed for implementing this?
Chris

Hello Chris,
this is like asking how much a car costs. It's not possible to answer it with a lot more information about the business requirements.
Regards
Marc
SAP NetWeaver RIG

Tools for mac maintenance? imac quite slow

are there any good free tools (or out of the box ones) for mac maintenance? my imac seems to have slowed down considerably over the last months, and i'm wondering if i can do anything to scan/repair. I know a usual answer is buy more RAM, but hoping to avoid that if possible. here's what i got for output from etrescan:
EtreCheck version: 1.9.15 (52)
Report generated October 4, 2014 at 9:45:31 AM PDT
Hardware Information: ?
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information: ?
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 7 days 23:43:18
Disk Information: ?
ST3500418AS disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (40.6 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPod
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Firewire Information: ?
Seagate GoFlex Pro Mac 800mbit - 800mbit max
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted>: 209.7 MB
FreeAgent GoFlex Drive (disk1s2) /Volumes/FreeAgent GoFlex Drive: 499.76 GB (13.53 GB free)
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[loaded] com.logmein.driver.LogMeInSoundDriver (1.0.0) Support
Problem System Launch Daemons: ?
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.wdhelper.plist
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[not loaded] com.logmein.logmeinserver.plist Support
[loaded] com.logmein.raupdate.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.logmein.logmeingui.plist Support
[not loaded] com.logmein.logmeinguiagent.plist Support
[not loaded] com.logmein.logmeinguiagentatlogin.plist Support
User Launch Agents: ?
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.valvesoftware.steamclean.plist Support
[running] com.victorpimentel.TVShowsHelper.plist Support
[loaded] uk.co.markallan.clamxav.freshclam.plist Support
User Login Items: ?
Skype
ClamXavSentry
ClamXav
Internet Plug-ins: ?
LogMeInSafari64: Version: 1.0.586 Support
OVSHelper: Version: 1.1 Support
Default Browser: Version: 537 - SDK 10.9
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
LogMeIn: Version: 1.0.586 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
LogMeInSafari32: Version: 1.0.586 Support
CitrixICAClientPlugIn: Version: 11.4.3 - SDK 10.0 Support
QuickTime Plugin: Version: 7.7.3
GarminGpsControl: Version: 4.0.2.6 Beta - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
TVShows Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 427.15 GB
Destinations:
FreeAgent GoFlex Drive [Local] (Last used)
Total size: 465.44 GB
Total number of backups: 82
Oldest backup: 2013-04-25 15:05:03 +0000
Last backup: 2014-09-28 06:42:19 +0000
Size of backup disk: Too small
Backup size 465.44 GB < (Disk used 427.15 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      3% WindowServer
      2% Finder
      0% coreaudiod
      0% iTunes
      0% fontd
Top Processes by Memory: ?
168 MB iTunes
135 MB softwareupdated
74 MB Google Chrome
74 MB Messages
70 MB mds_stores
Virtual Memory Information: ?
904 MB Free RAM
935 MB Active RAM
512 MB Inactive RAM
941 MB Wired RAM
15.36 GB Page-ins
6.45 GB Page-outs
Thank you in advance

I addition to running less concurrent processes or installing more RAM as Kappy mentioned.
I also see that you have less than 10% of free space left on your HDD.
Disk Information: ?
ST3500418AS disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (40.6 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
Which is fairly low and forcing it to work on the slowest part of the HDDs platter.

To retreive the Maintenance Cycle for a Maintenance Package

Similar Messages

Maybe you are looking for