To Retry activities that failed and are shown in Activities tab

I have a custom fault management policy defined and whenever I encounter an error in a BPEL process, it gets displayed in the "Activities" tab. Now, only an "admin" user can select one instance and "retry" it. However, I want the non-admin users to be able to do it. Is there a way to achieve this functionality?

Hi
Please check the following setting once again in spro > sales and distribution > baisc function > partner determination > For customer master
1. check for partner determination procedure AG , if you have created a new one then please check whether it is there in the list.
2.Select the AG and then check for whether the partner function has been made mandatory in the procedure or not.
tick mark SP, BP,SH,PY , since Sold to party should not be allowed to change so mark it as Not Modifable
3. partner determination procedure assingment for the account group. AG should be assinged to your account group
4. Account Group Function assingment - Make sure your all the partner function SP,BP.PY.SH has been assinged to the Account group here.
Thanks
RB

Similar Messages

How do you burn photos to a disc so that the titles are shown and they can be used in windows?

How do you burn photos to a disc so that the titles are shown and they can be used in windows?
do

Are they in iPhoto?
Select the pics in the iPhoto Window and use the File -> Export command. In the resulting window, at File Name, select 'Use Title'. Also check the boxes at Title and Keywords, and they will be written to the IPTC metdata of the files. Complete the export to a folder on the desktop and iPhoto will export the photos using the Title as a Filename. Burn that folder with the Finder.
Regards
TD

Stale Near Cache data when all Cache Server fails and are restarted

Hi,
We are currently making use of Coherence 3.6.1. We are seeing an issue. The following is the scenario:
- caching servers and proxy server are all restarted.
- one of the cache say "TestCache" is bulk loaded with some data (e.g. key/value of : key1/value1, key2/value, key3/value3) on the caching servers.
- near cache client connects onto the server cluster via the Extend Proxy Server.
- near cache client is primed with all data from the cache server "TestCache". Hence, near cache client now has all key/values locally (i.e. key1/value1, key2/value, key3/value3).
- all caching servers in the cluster is down, but the extend proxy server is ok.
- all cache server in the cluster comes back up.
- we reload all cache data into "TestCache" on the cache server, but this time it only has key/value of : key1/value1, key2/value.
- So the caching server's state for "TestCache" is that it should only have key1/value1, key2/value, but the near cache client still thinks it's got key1/value1, key2/value, key3/value3. So in effect, it still knows about key3/value3 which no longer exists.
Is there anyway for the near cache client to invalidate the key3/value3 automatically? This scenario happens because the extend proxy server is actually not down, but all caching servers are, but the near cache client for some reason doesn't know about this and does not invalidate the cache client near cache data.
Can anyone help?
Thanks
Regards
Wilson.

Hi,
I do have the invalidation strategy as "ALL". Remember this cache client is connected via the Extend proxy server where it's connectivity is still ok, just the caching server holding the storage data in the cluster are all down.
Please let me know why else we can try.
Thanks
Regards
Wilson.

I attempted an app update that failed and now the cloud is missing from my finder bar

I was attempting to update my apps using the cc box from my finder bar (mac) the first app failed to download and gave me a warning pop up. Now the cloud coin is missing from my finder bar. How do I get it back?

Troubleshooting issues with iTunes for Windows updates - MSVCR80

Over the past few days, sometimes opening a webpage in a new tab leads to that page and all of my other tabs coming up just black.

For example- I will have several tabs running, and will hit the "+" sign for a new tab, and choose a website. Firefox will load the page (ie, the circle in the top left that denotes that a page is loading will run, and will then be replaced by the website's icon), but the tab itself will be pure black under the navigation bar. I know the page gets loaded, since the website's icon shows, and if it's a forum, for example, I will get the message that it's linked with Tapatalk; but suddenly all of my tabs are black. In order to be able to actually do anything on Firefox again, I have to either quit out or Force Stop it; however, the problem eventually recurs. I've even uninstalled and re-installed Firefox, to no avail. I'm using an old Motorola Atrix (bought it summer of 2011), and the latest version of Firefox. Not really sure what's going on here. Thanks!
This has only been going on for about a week now, but it's very frustrating.

Well, the only add-on I have is the AdBlocker Plus, and I'd installed it when I first installed Firefox, so I don't think that was the issue. Also, can you even run Firefox Safe Mode on a phone? (I wasn't super clear that this is on my Android phone; it's buried in my post a bit.)
But yeah, I don't think it has to do with any add-ons.

Firefox 14 is playing random music and new tabs do not remember sites and are always called "New Tab".

2 problems have suddenly started.
1. A few seconds after I open Firefox 14 (with my home tab set to Google) music or ads or random snatches of radio begin to play. The only way I can stop it is by closing Firefox. After a while they stop.
2. When I open Firefox the first tab acts properly. It is named with the site I am on and, when I leave it, is there on return. The other tabs have suddenly stopped changing names to the name of the site and when I return to them they are defaulting to a page of recently visited sites. This is even more annoying than problem 1. Can anyone help please?

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created

In the new version of Thunderbird it seems impossible to set that attachments are shown as"Read only". It was possible in previous versions. Can anybody help?

In previous version of Thunderbird it was possible to set that incoming attachments are shown as "Read only". The solution was to set browser.helperApps.deleteTempFileOnExit as TRUE. In the latest version, no matter how I set this value,. the attachments ARE NOT shown as Read Only. As I need my attachments to be shown as Read Only, I had to restore older versions of Thunderbird. Does anybody have an idea how I can solve this in the new version of Thunderbird ?

''Wayne Mery [[#answer-672415|said]]''
<blockquote>
hmm, https://bugzilla.mozilla.org/show_bug.cgi?id=1009465 and https://bugzilla.mozilla.org/show_bug.cgi?id=1095893 seem relevant
</blockquote>
I don't see a solution on these links. I am not a computer expert, but it was easy to fix in previous versions of Thunderbird. I can't do it now with the latest version, on either Windows 7 or 8.

When comparing database tables with lob columns via "Database diff" in different environments indexes are shown as different

When using "Database diff" selecting other schemas only for compare own objects are shown too!Hi!
For tables with lob columns (clob, blob, etc.) indexes with system names are automatically created per lob column.
If I am on different database instances (eg. dev/test) these system names can differ and are shown as differences, but these is a false positive.
Unfortunately there is now way to influence the index names.
Any chance to fix this in sql developer?
Best regards
Torsten

Only the Sql Dev team can respond to that question.
Such indexes should ONLY be created by Oracle and should NOT be part of any DDL that you, the user, maintains outside the database since they will be created by Oracle when the table is created and will be named at that time.
It is up to the Sql Dev team to decide whether to deal with that issue and how to deal with it.

Authentication Failed and No Response VLAN

Documentation states:
I'm running 12.2(33)SXI. The documentation states:
With Cisco IOS Release 12.2(33)SXH and later releases, when you configure a guest VLAN, clients that are not 802.1X-capable are put into the guest VLAN when the server does not receive a response to its EAP request/identity frame. Clients that are 802.1X-capable but that fail authentication are not granted network access. When operating as a guest VLAN, a port functions in multiple-hosts mode regardless of the configured host mode of the port.
http://www.cisco.com/en/US/customer/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/dot1x.html#wp1135086
I've configured the following (in addition to the normal 802.1x commands) on the port to which the client is connected:
authentication event no-response action authorize vlan 100
authentication event fail action authorize vlan 100
Where vlan 100 is the guest VLAN--i.e. I want any client that has either 1) no 802.1x supplicant configured on the workstation or 2) does not have a valid login/password, to be placed on this VLAN. The problem I run into is that neither of these two things are happening. I can authenticate users with valid login credentials against AD and internal database but when a user without valid credentials attempts to log on or one without a supplicant attempts to connect, I see the debugs in the switch just sending EAP polls to the client. I would expect that it should put the client on the guest VLAN after the attempts time out or if the user provides invalid credentials. This doesn't happen. Please advise. Thanks.

It seems that the following command seemed to do the trick for us:
dot1x guest-vlan supplicant
Basically, even though I had the guest VLAN specified at the interface level, until I entered the above command at the global level, the client (that has no 802.1x supplicant or one that entered wrong credentials) was not being placed in the guest VLAN. Once I entered the above command, it seems to be getting placed in the guest VLAN.

Hard drive failed and replaced. Now can't sync Iphone

I had a hard drive that failed and can not sync my iphone with my new Imac. I don't care about all the music, as I have that backed up, but I can't figure out a way to get all my applications sync'd.
I restore my iphone and backup through Icloud but it won't let me sync with my new computer.
Is there any way that I can do this?
I don't have to purchase all applications again right?
Please help.

Just go to itunes
connect ipod
click file
then go to transfer purchases this will transfer everything u have downloaded from itunes
and anything u didnt buy from itunes just make a copy and paste it back in your new itunes

Where are my saved Firefox tab groups?

I had lots of tabs organized in groups to read them later...I installed some add-ons which some of them had to do with tabs(Xmarks,FoxTab)...
after restarting Firefox my groups and tabs are all lost!
Please help me...I have some kind of '''memory lost feelings''' after this mess!
SOLVED;
Thank God I restored all my tabs...
and thank you too @cor-el
In case of any problems with "session restore"
I summarize it:
1- Go to help -> troubleshooting information
2-click open "containing folder"
3-*[IMPORTANT]* CLOSE FIREFOX NOW
4-cut sessionstore-1.js(or any other number following) and paste it to desktop
5-rename sessionstore-1.js in desktop to sessionstore.js
6-*[IMPORTANT]* DELETE sessionstore.bak
7-move sessionstore.js which is in desktop and place it in the "containing folder "
8-choose move and replace (in win7)
9-start Firefox and have fun with your restored session!
email: [email protected]

App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data [1] in the file sessionstore.js [2] in the Firefox profile folder [3].
Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
* https://support.mozilla.com/kb/Clear+Recent+History
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox
It is also possible to use the "Show my windows and tabs from last time" setting, that is usually a more reliable way to restore session data.
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

I use an external hard drive for my Lightroom library and I notice that all the images shown on there are DNG. On my MAC hard drive I have images shown as NEF. I desperately need to free up space on my hard drive, can I safely delete these NEFs?

I use an external hard drive for my Lightroom library and I notice that all the images shown on there are DNG. On my MAC hard drive I have images shown as NEF. I desperately need to free up space on my hard drive, can I safely delete these NEFs?

dj_paige wrote:
however, I do point out that obtaining an additional hard drive and not throwing anything away seems a preferable solution to me.
heidie22, dj_paige has a very good point there. I would not through away the NEF files; I would archive them to a external drive.
By the way, I am assuming that converting RAW files to DNG is a decision you have made and not an accident.

How do I get all the songs from an album to show in the album view? Currently, if an album lists the artist plus a guest artist, those are shown separately and appear to be two different albums on my iPod. How do I get all the songs on that album togeth

How do I get all the songs from an album to show in the album view? Currently, if an album lists the artist plus a guest artist, those are shown separately and appear to be two different albums on my iPod. How do I get all the songs on that album together on my iPod? If the album is a collaboration wtih many artists, each sond may appear as a separate album.

I used to have this problem.
First, you need to go back on iTunes
you need to go to each of the songs that are having this problem
Click the album so all the songs drop down
Right click the songs that have this problem
Click ' Get info '
Click the tab that says " info '
The box that says ' album artist ' should probably be empty (correct me if I'm wrong)
Click it and type the artist of the entire album, NOT the songs guest artist
as such,
ARTIST
JAY-Z Feat. Justin Timberlake
ALBUM ARTIST
JAY-Z
These should be separate for each artist
If you write the same album artists for each song by that artist, all the songs should be on 1 album

Look at your iphoto 'page'. On the left is a margin running vertically down the page and within that margin are shown your files/folders - e.g 'events', I can't get that margin contents back

Look at your iphoto 'page'.
On the left is a margin running vertically down the page and within that margin are shown your files/folders - e.g 'events', 'last 12 months', 'anniversary' etc etc.
Now visualize the 'page' but WITHOUT the margin and the entries in it. It just disappeared while I was editing photos.
I've tried all the 'File', 'Edit', 'View', 'Share' 'Window' & 'Help' options, but no success.
There is no apparent way of calling up onto the screen any photos, folders etc. because I can't get the margin and its contents back onto the iphoto page.
I've tried restoring the page from my backup, where it is all perfect, but that didn't work.
Help please!

Move your cursor to the extreme left hand side of the iPhoto Window until it turns into a '+' and then click and drag right.

To Retry activities that failed and are shown in Activities tab

Similar Messages

Maybe you are looking for