To run the Past SO and DO Cycle

Hi Everyone
I am entering the past sales orders and deliveries from 01-04-2010 to 01-08-2010.But the system automatically schedule the deliveries of lines of sales order in the future date E.g 26-08-2010.And doesn't let me to change that.
can anyone tell me that how can i run the past sales order and their deliveries.
The existing posting Periods are April/2010 and May/2010.
Regards:Vijay kumar

Hi Vijjay,
Dont activate the availability check for the respective materials. in mm02. ( maintain as KP for the resp sales org/ dc/ plant)
Now create the sales order with RDD as past date and also change the date at schdeule line .
Also once the delivery is created  give the Actual GI date and other dates , loading , transportation,pick and pack as past date .
and do the PGI.
Hope this will help you.
Regards,
Krishna O

Similar Messages

  • Okay so I'm trying to download Adobe Flash Pro. I've gone to creative cloud and downloaded "Flash Professional CC and Mobile Device Packaging (2014)" and I have no idea what to do afterwords... There's no way to open or run the file. And to be honest, I'm

    Okay so I'm trying to download Adobe Flash Pro. I've gone to creative cloud and downloaded "Flash Professional CC and Mobile Device Packaging (2014)" and I have no idea what to do afterwards... There's no way to open or run the file. And to be honest, I'm not even sure if it's the right download... Help!

    I'm using PC with Windows 8.1. I got onto the Creative Cloud and downloaded "Flash Professional CC and Mobile Device Packaging (2014)". <--- That would be the file. I can't open or run it from CC and I couldn't find a file in my computer either.
    I've also found direct downloads for the trial version and hit the set-up button, it loads up, and then nothing happens.

  • HT201250 Is there a way to change the intervals at which Time Machine performs backups (e.g., weekly instead of hourly or daily) past 24 hours, daily for the past month, and weekly for everything older...

    Is there a way to change the intervals at which Time Machine performs backups (e.g., weekly instead of hourly or daily) past 24 hours, daily for the past month, and weekly for everything older...

    You can edit the interval in Console or install a Pref Pane
    called TimeMachineScheduler (Leopard or higher) free from:
    http://www.klieme.com/TimeMachineScheduler.html
    Good luck, Tom

  • Hi, I just bought the new i phone 5. I have plugged it into my computer a few times to run the back up and it has previously worked fine. When i try to connect it into the computer it is not recognised and will not do anything at all??

    few times to run the back up and it has previously worked fine. When i try to connect it into the computer it is not recognised and will not do anything at all??

    By calling iPod tech support while you are under warranty.  You also have 14 days to return it w/no questions asked for a replacement or your $$$ back. 

  • Please run the Photoshop installer and re-install Photoshop

    Hi!
    I just upgraded to PS CS% from PS CS3 Extended. Download went well as well as installation.
    After, i deactivate CS3 then i uninstall it using Adobe installer.
    Each time, i opened CS5, i have the following message:
    "One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing.  Please run the Photoshop installer and re-install Photoshop."
    I reinstalled it but i'm still having the same message. I didn't play much with it but it seems to work properly...
    What could it be?
    Regards!

    The problem most likely is uninstalling an older version after installing the new one.
    The Uninstaller removes certain support files which it can't tell are the new ones.
    The solution in your case is to uninstall CS5 first, then uninstall CS3, run the Adobe CSClean Script, Repair Permissions with Apple's Disk Utility, only then install CS5, and the Repair Permissions with Apple's Disk Utility again.
    All Adobe upgrades are full installers and do not need to find a previous version of the software installed.  When they don't find a previous version of the software installed, they'll just prompt you for the old serial number.
    It's not mandatory to uninstall older versions, but if you don't want to keep the older versions, uninstall them first, before installing a newer version.  I have all versions of Photoshop from 7.0.1 through 11.0.2 ("CS4") happily coexisting on my machine.  I can even run two versions of Photoshop simultaneously, just by launching the older version first and assigning separate scratch disk volumes to each.
    Wo Tai Lao Le
    我太老了

  • TS3694 help, im trying to update my iphone but it kept saying connect to itunes, i have updated, run the file over and over but its still stuck to connect to itunes, wat can i do? thanx

    help, im trying to update my iphone but it kept saying connect to itunes, i have updated, run the file over and over but its still stuck to connect to itunes, wat can i do? thanx

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work

  • I would like to run the vi first and then press the safe button to write it to disk.i am sending you the vi. please can you tell me how can i correct this vi?

    i am running some vis in frames of sequence frome frame number 1 to frame 10.after this i would like to create one other vi with some strings and i want to save it to disk with a save button. i am opening,writing and closing the data.what i want is that a save button to write the file .moreover i would like to run the application first and then press the safe button to write it to disk.i am sending you the vi. please can you tell me how can i correct this vi?
    Attachments:
    savestrings.vi ‏80 KB

    Here's a picture of a while loop around part of your code. All it's doing is waiting to write until the user presses the save button. If you need it to do more, explain in more detail.
    Attachments:
    While_Loop.jpg ‏17 KB

  • Snow Leopard 10.6.3 upgrade issues..  I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded.  Any suggestions?

    I've tried to upgrade to Snow Leopard 10.6.3.  I run the full install and my computer restarts to complete the installation, but when it restarts the software has not upgraded.  Any suggestions?

    Are you booting from the retail disc to do the installation, or running it while booted from Macintosh HD?
    It should work either way, but it doesn't always work when booted from Macintosh HD. The system files are supposed to be moved into place during the restart (while the HD is unmounted) making for a long restart time which sometimes causes people to think somethings wrong and abort it. Which is a bad move.
    If you're booting from the retail disc it's less obvious what the problem may be; however if you've tried it from booted from the HD and it's failed, then tried booting from the disc, it will fail again because the system components are already on the HD in a disc image waiting to be moved into place.
    Whichever way you were tryig, I'd try downloading OmnDiskSweeper (it's free)  and using it to see if there's a large package (around 7-10 GB) lurking somewhere that may contain the installer files. If you do, you'll need to trash that before the installer will see a 'clean' system again.
    It's also worth asking how much free space you have on your HD - if there's not enough for the installer to use for the temporary package or dmg, it'll fail.
    Was there no warning dialogue after the unsuccessful install?
    Message was edited by: noondaywitch ; link added

  • HT2589 Unfortunately, I have tried signing into Itunes for the past hour and keep getting this message: 'We're sorry we cannot complete your request on the itunes store at the time. Please try again later. Please help!

    Unfortunately, I have tried signing into Itunes for the past hour and keep getting this message: 'We're sorry we cannot complete your request on the itunes store at the time. Please try again later.' I'm using a thinkpad laptop T430. Please help!

    I have got the same problem. I am  using windows 8.1, latest version of iTunes, Symantec NIS.  My internet connection is working.
    My apple Id and my password are correct since they work on my iPad and on my iPhone.
    message is "ware sorry.we cannot complete your request on the itunes store at this time."   And in smaller letters : "try again later". Which i did many times over several days.  Just does not work.
    any idea anybody ?

  • Can I run the Photoshop CC and Lightroom with Windows XP professional as the operating system?

    Can I run the Photoshop CC and Lightroom with Windows XP professional as the operating system?

    The tech specs for Phtoshop CC and Lightroom indicate Windows 7 with SP 1 is required as a minimum, so XP would not be sufficient to run them.   Here's the Photoshop specs:
    Windows
    Intel® Pentium® 4 or AMD Athlon® 64 processor (2GHz or faster)
    Windows 7 with Service Pack 1, Windows 8, or Windows 8.1*
    1GB of RAM
    2.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
    1024x768 display (1280x800 recommended) with OpenGL® 2.0, 16-bit color, and 512MB of VRAM (1GB recommended)†
    Internet connection and registration are necessary for required software activation, membership validation, and access to online services.‡

  • Run the data copy and comments copy with the same key

    I want to Run the data copy and comments copy with the same key.
    I tried to challenge in the following way, but it is an error.
    1. Add the process in the process chain [/ CPMB / COPY] process in the process chain that could be new to copy the chain [/ CPMB / COPY_COMMENTS] (see capture)
    2. Select the newly can process chain to add a package, make a change to the script as follows:
    PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
    PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after copying",0,{"Yes","No"},{"1","0"})
    PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
    PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
    INFO(%TEMPNO1%,%INCREASENO%)
    INFO(%ACTNO%,%INCREASENO%)
    INFO(%SELECTION_KEYDATE%,)
    TASK(/CPMB/COPY_COMMENTS,SELECTION,%SELECTION%)
    TASK(/CPMB/COPY_COMMENTS,TOSELECTION,%TOSELECTION%)
    TASK(/CPMB/COPY_COMMENTS,CHECKLCK,%CHECKLCK%)
    TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
    TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
    TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
    TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
    TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
    TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
    TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
    TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
    TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
    TASK(/CPMB/APPEND_LOAD,TARGETMODE,0)
    TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
    TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
    TASK(/CPMB/APPEND_LOAD,RUNLOGIC,1)
    TASK(/CPMB/APPEND_LOAD,CHECKLCK,1)
    TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)

    We performed similar transfer of data from one planning model to another using DM package linked to BADI. In your scenario there is additional complexity of doing lookup from DSO and should be possible.
    Also check these references for performing lookup in DSO.
    abap code to populate data from DSO
    something about SAP: How to look for DSO&amp;#8217;s tables?

  • I was working on my 96page catalog with over 2000 photos and out of the blue my frame edges vanished even on the paste board and they are not hidden and are on

    I was working on my 96page catalog with over 2000 photos and out of the blue my frame edges vanished even on the paste board and they are not hidden and are on

    You won't see the frame edges if you are in Preview mode, so you should use Normal mode if you want to see them. You can turn off the Document Grid in the View menu (View>Guides & Grids>Hide Document Grid).

  • SAP NetWeaver: The Past, Present and Future

    Hi,
    On 1. September Gartner Release an new research Docoment called "SAP NetWeaver: The Past, Present and Future".
    Im not able to read it ... but maybe here somebody knows and can tell me what gartner thinks specially of PI.
    If you don't now something about the report. I'm intrested in personal opinions as well.
    Does an Investment from Customer side into PI makes sense, is there a long term strategie from SAP for PI.
    The same for developers .... what you think about the PI consultants future?
    I now there are already some simliar threads... but i didn't find something special to these gartner report.
    thanks and regards,
    Robin

    Robin,
    please check the blogs from Udo Paltzer regarding this.
    /people/udo.paltzer/blog/2009/11/08/release-recommendation-for-sap-netweaver-process-integration
    Also, as suggested, check the TechED 2010 sessions regarding the PI roadmap, including hand's on sessons on new PI release 7.3.
    Regards,
    JN

  • "A critical error has occurred while running the virtual machine and the machine execution has been stopped"

    I have the following error:
    "A critical error has occurred while running the virtual machine and the machine execution has been stopped"
    When I am installing grid clusterware and when is copying files from one node to other I received that virtualbox error and is stop working.
    Can somebody give me any hint how to solve it ?
    Thank you
    Eugen

    I think that is not a Clusterware issue, The clusterware installation may generating a high load on your machine and Virtual Box is not supporting.
    Check vbox.log file to identify root cause.

  • Ipod touch won't connect to my itunes i keep getting a notification saying "This ipod cannot be used because of the required software is not installed. Run the Itunes installer and remove Itunes, then reinstall itunes"

    I've tried everything from reinstalled to unistalling to turning my laptop of, resetting my Ipod and removing everything Apple related and Installing them again and yet it still doesn't recongise my Ipod but 'My Computer' does and it recongises it as a camera?
    Please any help would be appreciated specially if this has happened to you, I'm lost without my Ipod and i've been trying to fix it for the past 3 months
    Kind regards

    Did you try removing and reinstalling all the Apple software using these instructions:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Maybe you are looking for