To see the status of the approval

Hi
I have one po WF in me23n ->release stratagey tab i can see inforamantion where it get blocked and approved.
here in release stratagy for my po it showing that po is blocked at C band.
and if i check the WF log througgh me23n->workflowover view ->WF log, here it is showing my po has got approved in all levelsand mail has been send to vendor.
and also when i checked in se16 tab;e ZXWFLOG THERE IT IS SHOWING all the approvals and po get released.
my question is why it is showing differace in WF log, and me23 release stratagy and in se16 table zxwflog.
and let me know where can i see the WF approvals of my po with date and time
Regards
Suresh

hi
please check in table EKKO for that po no.
if it is released : then Release INd == R.
aslo see then Release status == where there is 'X' means it is release by that perticulat Band.
it wil make clear that which band really released it
for : the WF approvals of my po with date and time
in SWI1 : give the WI_ID .. there in container you can get the date and time, you hav to go to last task container for that task which release the PO :
there see Workitem tab in the task container --- its creation date and time there it will show actuall date too , on that date this WI is act up on.
thanks
Kakoli

Similar Messages

Site Members having contribute permissions can see the "Approve It" yellow bar under the ribbon but it is not clickable

Hello All,
I am facing a weird behavior from SharePoint. I added a couple of users in the Members Group having Contribute permissions.
Whenever the user open any pending page, a yellow bar appears stating "Waiting for approval
Visitors can't see this page until it's approved.
Approve it." But it is not clickable.
The users don't have the permissions to approve the pages.

In order to approve list items in SharePoint using content approval Full control permission is required on that list. You can create a custom Permission level to accomplish it with contribute access + approval if you require that functionality.
You may also go into the list settings > Versioning settings and change the Draft Item security to only allow approvers and the creator of the content to see the item unless it's approved because It seems like it's set currently to those that can edit
items, but they can't approve.

Where does the approver list fro sc get populated????

Hello everyone,
It will be really helpful , if some one can guide me. i am using a copied (custom)version of ws10000031 for shopping cart approvals. the standard workflow is for two level approval. there is some problem with this custom workflow now. it is not identifying the rite agents . where should i look for to find out where the approver list is getting populated. I am unable to pinpoint a place where the agents are being identified. moreover for two level approvals, i cannot see the second approver name inthe cart status.
also even after switching on the event trace , i cannot see any event getting triggered inthe trace but i c workitems generated.is this common??
help would be appreciated.
thank you

hi Disha,
Thanks for ur reply, but i had already done those steps .as i said i am using a copied version of the wf so i have assigned it to an expression &agent_0001.agent& and &agent_0002.agent&. that is what is there in the standard workflow too. my problem is i want to know where this container element is getting populated, since i am going to modify this workflow, i need to know this information. i have tried many different approaches but still cannot find it. it will be great if u can tell me whether this happens in any BADi or it happens inthe bsp code or where ???
or is it the adhoc agent assignment where this agent assignmetn is taking place?
because i can see the approval list inthe approval preview inthe cart status screen. i am wondering where and when this apporoval list is being generated???
thanks once again for the reply.

Work item never shows up in the approver queue

Hi All,
This is a specific issue to a particular user - approver. requisitioners are creating carts and are able to see that it is in approval queue. But the approver is not able to see the approval items in his queue.
We are in SRM 5.0 ECS SP15. This issue started all of recently. There has no changes in Org structure specifically to his attributes or workflow changes. Interestingly when workitem is forwarded to another approver, then that approver is able to view it. So, this tells me that this specific user has issues to view work items for approval.
Any suggestions is greatly appreciated and rewared.
Thanks
Rao

Hello Rao,
Did you check in SWI1 transaction if your particular user is defined as approver for concerned workitem ?
If you have user ID and password, can you see the workitem in SBWP transaction ?
If you use offline approval, has approval mail for this approver been created ? You should see it in SOST transaction.
Regards.
Laurent.

In STS,is the "Approved" button only belongs to authorization "R_STS_SUP"?

Hi all,
     I find that user have the authorization of "R_STS_SUP" can see the "Approved" button in STS running,without "R_STS_SUP" ,users can only have these:
·         From new to in process
·         From in process to for approval
·         From for approval to in process.
is that true? how can I let the users without "R_STS_SUP" can have "Approved" button?
    thank you!

Hi Stephen,
     thank you,I checked my user's authorization,he has R_STS_PT and Activity = 16. assume I have USER_A,USER_B ,I assiged USER_A to Headquarter,USER_B to HR dept. in STS running, USER_B can not see "Approved" button, but USER_A can see the lower level USER_B's "Approved" button, but in USER_A's own level ,USER_A can not see his "Approved" button.
    how can user have "Approved" button in this own level and don't have the authorization "R_STS_SUP"?
   thank you very much.

I want to see the preappreoved and prerejected on the End User Page.

Hi.
I want to see the approval >> preappreoved page and approval >> prerejected page on the End User page.
How can I do that?

Firefox 7.0.1 wiped out ability
* to test JavaScript from the location bar, say goodbye to JavaScript tutorials
* invoke JavaScript in any manner from the location bar, either directly or with a keyword shortcut.
* resize or move windows with JavaScript
See bug references in
*http://kb.mozillazine.org/Resizing_oversize_window
As a result
*I can no longer place windows on screen where and how I want them.
*Can no longer test/modify/fix at the location bar from code such as in the MozillaZine page above.
Design a browser for idiots and only idiots will want to use it.

How can I see the status of Rejected Documents sent for Approval from KM

I have a folder which is Approval Enabled. Now on sending a document to the approver ,if he rejects it from UWL ,how can i see it in KM ? Thank you for any input provided in advance . In UWL I cannot see it .

You can see if a document is rejected from KM folder in which the document is there .From the document level(which you have sent) click on the arrow and select Details . A new Window opens up .Now go to Actions>>approval .You will see the name of the approver who has rejected your document .Now you can resend it or skip it . This is how you do it .

Can we able to see the Work Items status in the BPM Workspace

HI,
Can we able to see the work item status in the BPM workspace.
For exampls, I have create the request as requester then it will go for approval.
After sometime i login into the workspace can i able to see my request status(it mean where it is like approval1, approval 2)?
Pls let me know, its possible in the BPM workspace.
Regards,
Anandh P

Hello Anandh,
You can utilse the filter option of the BPM workspace.
When you filter the instances you can view the status of all the instances even if they are currently not assigned to the particular user.
All you need to do is click on the show filter link.
Select the process from the Filter by: combo box.
Check the status boxes and click on apply filter.
You will be able to view the instance even if it is not assigned to you.(Though you will not be able to work on it.)
If you wish to give custom messages like "pending with HR" or "Pending with Admin" then you need to add a column by creating a project variable and mapping it to the custom view. Then these messages can also be shown on the instances.
Hope ths helps.
Regards,
Jaydev Doshi

So where we see the status of this work order request

Hi All,
I have submitted work order WO00034931 in SAP for a new vendor address but it seems my approver (Andre Vabre) never received it. In SAP, its status is Submitted for Approval.
So where we see the status of this work order request
Thanks,
Kumar

Hi
You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
variant conditions to define surcharges and discounts for a variant
Variant u2013Pricing steps
Create condition record
create a procedure where you enter the reference from the characteristic
Assign the procedures to either the characteristic values
configure the material in the sales order
The net price for the material is displayed
If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
In addition, the Conditions pushbutton is displayed.
On pressing this pushbutton,
One can see which conditions have
influenced the price.
I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
Thanks

Can not see the details of the task approved in UWL of ESS

Leave approver can not see the detail of the task approved such as the start and end date of the leave, number of days used, leave quota details of the applicant when he approved it.
Please give your advises!
Regards,

Hi!
Maybe these attributes are not being shown due to the fact that they might have been specified in the "List of Display Attribute to exclude from Preview/Detail area" attribute of the UWL iview currently being used.
As you can see in the Help page:
http://help.sap.com/saphelp_nw70/helpdata/de/0a/ad68c125ae496f8c04a25090bd2e3c/content.htm
It states the following about this attribute:
"Enter the names of the attributes which you want to hide from the display in the preview area. These names should be comma separated."
Maybe for the UWL iview currently being used it has been specified some values for this attribute, and so some information for the items such as the start and end date of the leave (along with the others you have mentioned) are not getting displayed in the preview area.
Hope this helps!
Best regards,
Armando Zaro

How to change & see the PO Status (Purchase Order Status) ?

Hi Everybody,
I have to change the PO Status. For this I am using the Function Module 'BBP_PD_PO_STATUS_CHANGE'. But it is not changing the PO Status. How/Where to see the PO Status?
Please help me out asap.
Thanks & Regrds,
Nagaraju Maddi
Message was edited by: Nagaraju Maddi

Hi ,
It is possible to Update the Pricing procedure in Old PO. For this what you need to do is Open PO in ME22N transaction, in the header Org. Data tab remove the Purch. Org and Company Code and press Enter Key for 3 or 4 times now enter the Purch. Org and Company Code now check in the Item Data, condition tab Analysis button new Pricing procedure is picked up. Even we can change the PO Currency in this way if it is changed in Vendor master.
Hope this will help you
Best Regards,
Pradeep Naik

Anyone else having issues with location services since the 7.1 update? Ever since I updated i've been seeing the location services on my status bar at all times.

Anyone else having issues with location services since the 7.1 update? Ever since I updated i’ve been seeing the location services icon on my status bar at all times. I noticed that google was the app that was using it a lot, but after I turned the feature off for google my phone started using the “traffic”, “frequent locations” and “cell network search”. When I turn the feature off for all of those things it’s no longer a problem. So just wondering if anyone else is having this issue or if anyone has a solution?

The "solution" is probably to increase your knowledge. You've done good things. Perhaps this article will educate you a bit more about location services.
Basically, they can be very useful, but can cause a lot of iPhone use. A major example is "Remind me to ... when I leave home."
http://support.apple.com/kb/HT5594

HT1657 Once I rent a movie, I thought you had 24 hours (in the US) to watch it multiple times. We used to see that but for some reason, we don't see the "rented" status to re-watch. Has that policy changed?

After watching a rented movie from Apple TV, it appears to disappear not giving us the option to re-watch again. Has the policy changed? We used to be able to see the "rented" status for 24 hours, indicating how much rental time we had left.

The 24 hour limit for the US hasn't changed, you should still be able to watch it as many times as you like within those 24 hours (and the 30 day limit from renting it, whichever ends the soonest). You should also be able to see the remaining time - from http://support.apple.com/kb/HT1415 :
On your device, the time remaining for you to finish watching the movie appears near the movie title.

How to see the status of a FM IN BACKGROUND TASK?

Hi experts,
If I call a FM IN BACKGROUND TASK addition. I can't Debug the FM called in BACKGROUND TASK. Then whether there is a way to see the status of this FM IN BACKGROUND TASK? I want to know this task is finish or not.
Thanks.

Hi Kelvin,
I am also facing similar problem. I have come across few documents which have suggeted the way to test the FM in background. For this you will have to change the debugging settings, its in the Settings->Display and change all. Check the oprion for In background task.
A good document on settings of debugging.
http://www.sappro.com/downloads/Settings&SystemAreas.pdf
Regards,
Sana.

How do I view the Horizontal Scrolling bar and status bar at the bottom of the screen. I can only see the top menus, toolbars and vertical scroll bar?

Before the most recent upgrade, the bottom horizontal scrolling bar and status bar appeared on my screen. Now since upgrading, I cannot see the. Anyone ideas how to restore them?

If you haven't already, you could force-quit Quicktime by using the menu option from the desktop (finder) and choose Quicktime.
Not sure what you have frozen on the screen, be it a failed movie, or some unusual screen shot. If you can find by date (created) you may be able to look for .mov or quicktime suffix name or other video file content to delete it.
And you may have to restart your computer and perhaps run repair disk permissions from Disk Utility's first aid on the hard disk drive in your computer.
Not sure if all that would help now, but it is something a few days late...!
Good luck & happy computing!

To see the status of the approval

Similar Messages

Maybe you are looking for