To send an nonconvertible, unalterable file.

If Adobe allows us to convert pdf files to editable word or excel files, how does one send a file that cannot be altered in any way by the receiver?

Hi,
For that you have to secure the file with Adobe Acrobat. Please refer to article mentioned below:
http://forums.adobe.com/docs/DOC-1515
~PRanav

Similar Messages

  • I need to send a group of files in a zip file. How do I do that?

    I have Microsoft Office for MAC and send to send a group of files.  I would like to compress them into a zip file.  Is there a way to do that with my MAC?

    Select all the files, control-click any one of them, and compress them.
    (64471)

  • How to create xml file from Oracle and sending the same xml file to an url

    How to create xml file from Oracle and sending the same xml file to an url

    SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
    Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way.

  • The same filename from a sender to a receiver file adapter

    Michal has provided us with a brilliant <a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14.  I guess a lot of people have been waiting to do this. However, I have a slightly different scenario. In this case, XI is used as a medium to transfer a PDF file from one directory to another directory. There is not transformation or mapping involved.
    The message is send by File Sender Adapter and received by File Receiver Adapter. Message type is created as a simply type hexBinary. The file is supposed to be picked up as a PDF and received as a PDF, retaining the same file name. As such, the file name is neither stored in the source structure nor the target structure.
    Once the PDF file is transfered into target directory, it should be able to be open by using Acrobat directly without further conversion.
    We might add a file name file into the target structure but would that rendered the PDF non-readable upon being received by the File Receiver Adapter?
    Any feedback is highly appreciated.

    Hi
    >>We might add a file name file into the target structure but would that rendered the PDF non-readable upon being received by the File Receiver Adapter?
    No, adding file name would not hamper the properties. You can name *.pdf or something else.
    For that matter any file pdf, word, .msg format etc can be transferred by this approach. We have tried it.
    Earlier to SP14 you cannot give the same name to outgoing file without writing a Adapter module. But things are easy with SP14.
    Cheers,
    satish

  • The same filename from a sender to a receiver file adapter - SP14

    Hi Expers,
    I Have Gone through the link which is given bu Michal.
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    Here My Questions are.........
    1.Should we give any file name in the receiver side Adapter in this scenario.?????
    2.How wil be the Sender and Receiver Communication channel Parameters????
      What Are they???????
    Please Clarify me...
    Regards
    Khanna

    Hi Rajesh,
    Is your query related to sending the file name from the source xml document to the reciever file adapter. If so this can be achieved.
    Pls. do the following.
    1. In the mapping program that you are using populate the filename coming from the source into the target root element.
    2.Sender adapters can write adapter-specific attributes to the message header; these can then be evaluated at configuration time
    3. To change the adapter-specific attributes of the message header by using message mappings, you access the required classes of the mapping API by using a mapping runtime constant.
    <b>Note: You donot need to specify any filename in the receiver communication channel.</b>
    To access the classes DynamicConfiguration and DynamicConfigurationKey by using the mapping runtime constant DYNAMIC_CONFIGURATION, use the method getTransformationParameters() of the container object.
    Create an simple user defined function in the mapping and use the following code.
    Imports: com.sap.aii.mapping.api.*;
    Parameter: String filename
    Paramter: String filename;
    filename = fileName + ".DAT";
    DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
    conf.put(key, filename);
    return filename;
    You donot need to hard code the value of the filename in the file adapter for your interface.
    In SXMB_MONI, when you see the pipeline services you would see that the value of the filename is populated in the message payload.
    Thanks
    Indranil

  • Problem: The same filename from a sender to a receiver file adapter - SP14

    Blog : /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    My Problem:
    The thing works for me and i am able to get my input files name as my output file name. But one thing i noticed is that in my target message, the field where i have mapped the code it always returns the value "null" but finally when the file is created i get the required result.
    My input file name is input.txt and i get the same name in my output file too.
    In sxmb_moni if i check DynamicConfiguration link i see the following
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!-- Response
    -->
    - <sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30">
    <sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFTPHost">10.25.116.98:21</sap:Record>
    <sap:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">/input/test</sap:Record>
    <sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileTimestamp">20060228T112200Z</sap:Record>
    <sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">bin</sap:Record>
    <b><sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">input.txt</sap:Record></b>
    <sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileSize">770</sap:Record>
    </sap:DynamicConfiguration>
    But when i check my mapped field i see
    <field3>BodyC</field3>
    <keyfield>02</keyfield>
    <field5>BodyE</field5>
    <field6>BodyF</field6>
    </Body>
    - <Trailer>
    <keyfield>03</keyfield>
    <b><field2>null</field2> -> Null value instead of input.txt</b>
    </Trailer>
    </ns0:MT_Putfile>
    The code i have used to map the field2 of the trailer is the following ....
    <i>DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileType");
    String valueOld = conf.get(key);
    return  valueOld;  </i>
    Any clues ?

    Gosh this is spooky
    Anyway i tried with that line of code but it throws me an error during activation ...
    Activation of the change list canceled Check result for Message Mapping mm_IS | http://t-systems.com/Shabarish:  Starting compilation  Source code has syntax error:  /usr/sap/TXT/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map387c7300a9ac11da9d280011256afae8/source/com/sap/xi/tf/_mm_IS_.java:104: cannot resolve symbol symbol : method getTransformationParameters () location: interface com.sap.aii.mappingtool.tf3.rt.GlobalContainer DynamicConfiguration conf = (DynamicConfiguration) container.getGlobalContainer().getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION); ^ 1 error
    The code is :
    DynamicConfiguration conf = (DynamicConfiguration) container.getGlobalContainer().getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    //DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    //String valueOld = conf.get(key);
    String valueOld = conf.toString();
    return  valueOld; 
    Thanx Renjith so far .. but i hope this gets resolved (else i will loose my sleep thinkin abt the situation)

  • How to send an email with file attchment

    hi,
    I have develop one application using HTML DB.In that sending an e-mail facility is also there. I am able to send an email using an the HTMLDB_MAIL.send() procedure. But using this procedure i am unable to attach a file to the mail.Is there any way to send an email with file attachment.
    Thanks in Advance.

    hi,
    I have develop one application using HTML DB.In that sending an e-mail facility is also there. I am able to send an email using an the HTMLDB_MAIL.send() procedure. But using this procedure i am unable to attach a file to the mail.Is there any way to send an email with file attachment.
    Thanks in Advance.

  • AS2 error The FILE send adapter cannot open file

    I have AS2 setup under biztalk. I have receive port which listen to HTTP adapter and keep listening on web site.Then there is corresponding send port which just write that file in folder . Send port just have filter for Receive adapter name.
    It works fine, but some time I get error message 
    The FILE send adapter cannot open file <folder name\guid.txt > for writing.
     Details: The system cannot find the path specified.
    I am not able to understand what is error for this? Please help me to figure-out this. 

    Specifying the Backup transport is not going to solve the problem. Specifying the backup transport in this case is something like addressing the symptom of the issue and not finding the solution to root cause of the issue.
    As you specified, if the mentioned error only happens some time but not always. In this case, the message "The
    FILE send adapter cannot open file <folder name\guid.txt > for writing." would just be a warning message. Just by setting the retry in the send port will solve the issue. i..e Since this issue occurs rarely, it may be short lived glitch.
    So by setting the retry count (lets say 3 times) with retry interval (let say 5 mins), this issue can be easily mitigated. You would not lose the message. So during the glitch you would get this message as warning, send port will retry "after specified
    retry interval so after 5 mins", so by that time chances of files transfer is high. So this problem can be easily handled just by having retry count and retry interval in send port.
    But you need to find the actual cause for this issue or you need to find the permanent resolution for this issue.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • ABOUT DATA SENDING IN idoc TO file SCENARIO

    How the data is sended in idoc to file scenario?
    what is the difference in sending data through BD10, BD14 and WE19 ?
    Is the data is sended through XI OR R/3 SYSTEM?

    Hi Rammohan
    >> How the data is sended in idoc to file scenario?
         Makeing settings in SAP R/3 side then based on the RFC
         destination,port,parterner profiles.....
         Idoc can hold the data with out any direction but RFC port will direct where to
        go ...based on the partner profiles (Out buond IDOCS)
    >>what is the difference in sending data through BD10, BD14 and WE19 ?
        BD10,BD11,BD12,BD13,BD14 will be to send the master data automatically
        generally will be in the production(But not for testing) and this will be depending
        on the declaration of profiles in the BD64
        --- But we19 will be used to test the Idocs with any data
            but here we need to give all the parameters like senders,receivers,ls,idoc...
    >>  Is the data is sended through XI OR R/3 SYSTEM?
         Data will send through XI  i.e XI will receive the Idoc and Convert into XI specific
         SOAP XML message and process all the pipe line steps ...based on the target
         it will send
         Here target is file so choose the file adapter as target and give all parameters
         it will work fine
    I hope this will answer your question
    regards
    --- prasad

  • I bought an iPhone from Ebay and it did not turn on so I looked on WinSCP and it said there was NO files PLEASE can someone send me iPhon 4 files!

    I bought an iPhone from Ebay and it did not turn on so I looked on WinSCP and it said there was NO files PLEASE can someone send me iPhone 4 files!

    No, no one can do that. You need to try restoring it:
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • My ipad locked up when trying to send a large video file. I tried to turn it off and it's stuck. What so I do?, My ipad locked up when trying to send a large video file. I tried to turn it off and it's stuck. What so I do?

    My ipad 2 has locked up when trying to send a large video file. What do I do? Is there a reset button.
    Thank you

    Assuming that it's not still trying to send the video, then you could do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • How send and receive XML file from PI 7.0 via SSL

    Hello experts,
    Can you point to some documentation , examples , links where I can get some information on how to send and receive XML files using PI 7.0 via SSL ?
    Thanks in advance.

    Hi,
      refer to the following links.
    Enabling SSL
    http://help.sap.com/saphelp_nwpi71/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
    Adapter specific security
    http://help.sap.com/saphelp_nwpi71/helpdata/en/f5/799add57aeee4f889265094a04695c/frameset.htm
    regards,
         MIlan Thaker.

  • How can I send a large pdf file (42MB) attachments by icloud ??

    How can I send a large pdf file (42MB) attachment by email in Icloud ???

    That's a bit excessive.  The website http://convert.neevia.com/pdfcompress/ can compress files up to 5 MB in size. You may want to print to PDF single smaller pages, or print the document and scan it one page at a time to PDF, and then use the PDF compress tools to shrink it further.

  • Send mails with csv file as an attachment through oracle(SQL SCripts / Stor

    Hello Everybody,
    I have recently come across a requirement in which I am supposed to send mails with csv file as an attachment through oracle(SQL SCripts / Stored Procedure) .
    The contents of the csv file are to be retreived from the Database as well as the content of the mail and to whom it needs to be sent has also to be picked up from the database.
    Can somebody suggest me with a suitable code for the same?
    Would be of great help..!!
    Thanks & Regards,
    - VR
    Edited by: user646716 on Dec 18, 2009 10:44 AM

    read below links
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:255615160805
    http://www.orafaq.com/wiki/Send_mail_from_PL/SQL#Send_mail_with_UTL_TCP_-withattachments
    How to send csv file as an attachment

  • Send pdf file in an email by c# emailer, also sending a completed pdf file to server

    I am trying to achieve two things: First I want to have a submit button on my pdf that sends the completed pdf to a asp.net C# file that sends the completed pdf file, as an attachment to a hard coded email address by a mailer, which i have already created. Then, I want to save the completed pdf file to a directory on the sites server using c# code, so I can make the file name of the pdf one of the fields from the pdf. I have been trying to make this work now for a little over a month with no success. Some insight into this would be GREATLY appreciated.
    Thanks in advance.
    Doug

    You'd probably want the LiveCycle Forms ES product on the server to
    handle the merge from submitted XML data to a PDF on the web. Then you
    could e-mail or store the data.
    Aandi Inston

Maybe you are looking for