To send from FCP to Shake can I send clips out of the time line?

My clips are coming into Shake blacked out- do I have to convert these to QT files first, and if so how does that work flow look like- would I overright the Shake rendered QT over the original clip in the FCP timeline? This doesn't seem too elegent, does Shake only take still images and QT files?
Thanks,
-todd

I don't use iMovie but there is a way to get .mov files out through one of the export functions (Share or something like that). import the .mov files into fcp, create a DV NTSC 48K sequence and you'll find you do not need to render.
Also, when you export .mov files from iMovie, you can filein directly to Shake if need be.
Out of curiosity, why are you bothering with iMovie at all if you're using FCP and Shake?

Similar Messages

  • CS4: How can I copy named potions of the time line to the projects panel?

    I am trying to copy named portion of my time line to the project panel & I can't past the segment.
    I copied a large AVI file to the time line, split it up into sections, & am trying to place the individual rename section into the Projects Panel. I can Copy the segment, but when I try to Paste it into the Projects Panel the Paste command is not "lighted up".
    How can I copy named potions of the time line to the projects panel?
     

    I found a way albeit a tedious method:
    positioned the render bar( I do not know the proper name) to encompass each segment separately.
    Exported that segment to Media.
    Media in turn transferred the segment to the Media Encoder program.
    The Media Encoder, after processing the segments, deposited the files in a temporary folder.
    Lastly, imported the content of the folder to the Project Panel,
    Thank you for all your suggestions.

  • Scary Message Every Import  from my Sony PMW 320 XDCAM EX  Clip Files w/ Completed Time LIne

    Hello
    This is the 3rd question I've posted working my way through my first edit (and HD edit) with Premiere Pro CS5.5, and I have a completed time line with the basic edit for an important event, my first for a client I hope to work for again.  Am now working on the title sequence at the beginning and also a "recap" with music and highlights at the very end.  Then I will be trying my first burn to a bluray -R disk on the LG 12x internal BRD unit in a high performance Mac Pro I had built at OWC.  10.7.5 Lion currently.
    3 types of files: 
    1.  1080i 29.97 upper frame first, standard 1080i settings......from my B camera footage from a Sony NEX 5N.  28mbps I believe.  Example clip:  00018.MTS.  No issues or messages on the imports into the Project window. 
    2.  Backup files same settings but 50mbps from Nanoflash recorder attached to my PMW 320 camcorder through the HD SDI output.  Example clip:  01253001.MTX. 
    Both of these above I just dragged their entire folders onto my internal master 2 disc Raid 0.  And then imported just the "clips" from each into the project window in each's own bin or folder.
    3.  Same scenario with my main files copying them from the large camcorder.  Example clip:  159_0221_01.MP4.  35mbps.  All 3 of these types of files have 29.97 fps indicated to the right.
    But in the Project window when I selected initially all the clips from the drop downs inside the folder from the PMW 320 on the Master drive, and since then just some individual clips.....I keep getting this::  A window with "File Import Failure" in the top header and 5 lines of all the Volume codings within that Folder in the message box, and below it, "Error Message"  "File format not supported"  with an active "OK" button.  Which I have clicked and then gone ahead and worked with them.
    But the clips in question are all in the project window and load fine into the Program Window or drag fine directly to the time line.  I have completed the whole sequence save for what I mentioned above.  Color correction, audio adjustments, slo motion, freeze frames, transitions, everything.  I have even taken a short piece of the time line and done experimental exports to self contained "Animation" codec clip,  H.264 clip and an MPEG 4 clip.  All were successful.  Last step coming soon will be export to 1080i 29.97 bluray.
    I believe I have seen "MPEG 4" in the codec info on the PMW 320's clips.  Being that Premiere is supposed to handle every codec no problem, and that it seems to have done just that, what is going on here with these messages??  I have a ton of hours into this 1st edit and it all seems to work.  Do I not need to worry about this message even if I don't understand why I am getting it?
    Thanks much
    Ron

    All that shows is the clips themselves, but yes I guess that could be happening.  So in the future from the PMW 320 import them 1st into Media Browser and then to the Project window?  (before taking them to Source window or directly to the time line)  Or just leave them in the Media Browser, and work it from there?
    In the meantime, the fact it has all worked and seems to be working, would you think I'm OK since I've been able to do up to a massive 156gb Animation codec 16 minute portion of the sequence while I was first experimenting?   I am likely going to try the Dynamic Link function and Auto settings into Encore, straight from my time line of around 90 minutes.  Per the suggestion of Ann here in one of my other threads asking about that part.  Just to see if I can mail it on time on Tuesday if it looks good.

  • How can I put a marker on the time line ?

    Hi,
    I'm trying to set a marker on a composition timeline with a script but... I can't do it.
    I easily create a marker on a layer in my composition, I easily create a marker on my composition when nested in an other comp, but I just don't find how to say, "Hey, I just want you tu put a marker on top of everything", just when you hit the " * " on your keyboard with no layer selected.
    Can anyone help me ?
    Thx,
    See ya.
    --- EDIT ---
    I totally missed it when I first searched on the forum, but I found this thread : http://forums.adobe.com/thread/496748?tstart=180
    Two years ago, my request was impossible to solve, is it the same now ?

    What do you mean when saying "if the same name exists" ? If the same menu item exists ?
    Yes, for example "File > Import > File..." and "Composition > Save Frame As > File...", both are labeled as "File..."
    app.executeCommand(app.findMenuCommandId("File..."));     Wouldn't know which one you are talking about.

  • Can we send survey to email ids from formcetral itself? Can we track who has filled the survey?

    Can we send survey to email ids from formcetral itself? Can we track who has filled the survey or given the response?

    We currently do not support this. You would need to send out the emails and track who filled it out yourself.
    Randy

  • I've just signed up to iTunes Match as I have songs on my iPhone 4 which wont sync with iTunes as they are from CDs but I can't see my music in the cloud now. Anyone had the same problem and have an easy fix?

    I've just signed up to iTunes Match as I have songs on my iPhone 4 which wont sync with iTunes as they are from CDs but I can't see my music in the cloud now. Anyone had the same problem and have an easy fix?

    What fixed it for me:
    On your computer, open iTunes > My iPhone (or whatever name you gave your iPhone) > "Music" page
    Uncheck "Sync Music"
    Click "Sync" button (bottom right)
    Let it run and finish
    Uncheck the box for every song, playlist, etc.
    Click "Sync" button (bottom right) (This step may be unnecessary, but I did it and got the result I wanted.)
    Let it run and finish
    Check the boxes for the music you want on your iPhone
    Click "Sync" button (bottom right)
    Let it run and finish
    See if that doesn't work for you.  I tried a lot of things that did nothing, but this seems to have fixed it, and quickly.

  • How can I get my 2010 mac book pro to send signal out through the mini display port?                      end signal out through the end video signal out through the

    How can I get my 2010 macbook pro to send signal out through the mini display port?

    First, what you said is contradictory. You say "can't get a video signal", then say"the Mac wallpaper is broadcast, the mouse pointer is visible". "No video signal" means an absolutely black,blank screen. It sounds like you have plenty of signal.
    I am supposing what you are seeing is actually a blank desktop, which is to be expected if your settings are such that you are extending the desktop, instead of mirroring it.
    Within the preference panes is a setting that allows you to change this. Open System Preferences, click Displays, and then click Arrangement. You will see that you are extending the desktop. Change that setting.

  • How can I build a table with the time values of a timer from a while loop

    Hi:
    I have a question concerning building a table:
    Every 100ms I read a value from a sensor (while loop with a timer). I would like to build a table with the actual time and the concerning value. For example:
    0msec         1V
    100msec     2V
    200msec     3V
    300msec     4V
    etc.
    If I use the Express VI for building a table, I always get the date and time, but I don't need the date and the time is in the following format: HH:MMS, which is nonsensical for me as I can't differentiate within msec. Can I change the format anywhere?
    Can I also save the table to a file or even to an Excelsheet? How can I do that?
    Thanks for your help!

    Hi Craig:
    thank you very much. To solve the mystery : ) :
    I want to drive a stepper motor with a specific frequency. To get the current degree value of the motor I would like to measure the current time (from the beginning of the move on). (With a formula I get the degree value out of the time)
    Concurrently I would like to get data from a torque sensor and from a pressure sensor. That's why I asked you about the time and the table. The measurement should start with the movement of the motor. How can I do that? Right now I have different block diagrams (different while loops) (see attachment) and I would like to put them in one.
    I haven't done the block diagram for the pressure sensor yet, so there is only the one for the torque sensor and the one for the motor.
    I also would like to set a mark in the table when the voltage value of an analog input gets under a specific threshold value. Is that possible?
    I'm sorry, I'm a novice in LabVIEW. But maybe you can help me.
    Thank you very much!
    Steffi
    Attachments:
    motor.vi ‏238 KB
    sensor.vi ‏59 KB

  • My old iPad 2 is updated to ios 7.1.2 but I have a new 4 which is only compatible with 7.0.4 from setup. How can I backup my account to the new iPad with this incompatibility?

    My old iPad 2 is updated to ios 7.1.2 but I have a new 4 which is only compatible with 7.0.4 from setup. How can I backup my account to the new iPad with this incompatibility?

    What you need to do is temporarily set up your new 4. Just long enough to update the operating system. Then you can erase all content and settings - which puts it back to its out of box state, then set it up again, this time restoring it from the backup of your two.
    So, using the same Apple ID on both - just to keep things easy - set up your 4. Just basically choose 'set up as new' to activate it, then immediately update the iOS to 7.1.2.
    then erase all content and settings, which puts it back to 'llike new'...but the operating system will not reset, it'll remain 7.1.2
    Then set it up again, this time choosing to 'restore from the backup' of your 2 and your 4 will be a near clone of your two.

  • How can I stop my iphone 4s from asking for my icloud, yahoo and other passwords all the time?

    How can I stop my iphone 4s from asking for my icloud, yahoo and other passwords all the time?

    As long as you share that AppleID for iCloud, you cannot.  You are sharing a a single iCloud account and sync services.  The only thing you can do is get a second AppleID and use it with iCloud - you do not have to use that new AppleID for anything but iCloud (ie. you can still share an AppleID for iTunes and App store purchases).
    P.S. I am assuming you both want to sync your contacts with iCloud?

  • HT3951 I have several tv episodes stuck in my downloads on my iPad. I receive an error, unable to download when I try to resume downloading. I can't clear them out of the download queue. How do I get rid of these from download?

    I have several tv episodes stuck in my downloads on my iPad. I receive an error, unable to download when I try to resume downloading. I can't clear them out of the download queue. How do I get rid of these from download?

    You can always finish the downloads in iTunes on your computer and then the TV Shows to the iPad. Launch iTunes and go to Store>Check for available downloads. Finish the downloads and then sync the iPad.
    As far as trying to finish the downloads on the iPad .....
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to download again.

  • When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other?

    When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other? In the Migration tool, I was only given the option of choosing the computer when it appeared on the same network, and didn't see an option to connect them to each other. Even though they're both connected to the same network with a wired connection, the migration is painfully slow.

    Yes. The following quotation is from About Windows Migration Assistant
    These are the preferred network connections, in order:
    Use a CAT6-certified Ethernet cable that is in good condition to connect the Ethernet port of the PC directly to the Ethernet port of the Mac or Ethernet adaptor (USB or Thunderbolt). You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
    Use CAT6-certified Ethernet cables that are in good condition to connect the Mac and PC to your home network router/hub/switch. You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
    For wireless, use the fastest wireless signal possible (802.11n 5Ghz). Try to have the PC, Mac, and the wireless access point all in the same room close to each other.

  • Facetime is just disappeared from my iphone 6 can anybody help me out plz

    facetime is just disappeared from my iphone 6 can anybody help me out plz

    Where did you get the phone? FaceTime is banned in some countries in the Middle East. What had you done before it disappeared; did you possibly reset or restore the phone?
    If the above is not the issue, if you use Search by dragging down your finger from the center of the screen and you search for "Facetime" does it appear as an app? If it does, then you must have moved it into a folder or another page of the Home screen. If it is in a folder the folder name will be displayed.

  • HT1277 I can recieve emails but I can't send them out.  The blue bar at the bottom left of the Mail page gets half way across and then the pop-up "Cannot send message using the server" comes up?  What do I do?

    I have my Yahoo Mail "poped" over to Apple Mail.  I can recieve emails but I can't send them out.  The blue bar at the bottom left of the Mail page gets half way across and then the pop-up "Cannot send message using the server" comes up?  What do I do?

    Your outgoing mail server is different than your incoming server. Usually the outgoing mail server will have smtp in it. I noticed yours said "cannot send message using the server mail.wavecable.com". That sounds like an incoming mail server. Try setting your outgoing mail server to smtp.wavecable.com
    I hope that helps.

  • I deleted a pop email account from mail.  How can I recover those sent messages without Time Machine?

    I deleted a pop email account from mail.  How can I recover those sent messages without Time Machine?

    Thomas,
    "Note that you were warned that this would happen and approved it.  When you delete an e-mail account in Mail, you are shown a message like the following:"
    You didn't read my problem - I said I deleted a POP email account.  I always read the messages that pop up and in Mail when you delete a POP account - IT DOESN'T TELL YOU NUTHIN!  It just deletes it - which *** for me.  Fortunately, I had an iPhone and on that device I had about a 1000 messages that I could recover but on all my POP accounts I download them from the server onto my Mac so they were only on Mail (the really old ones that I wanted to keep.)  I had to move them into another directory one by one basically because when I would move 50 some of them would move and some wouldn't and I never did figure out that problem.  Basically the ones that would not move are the ones that were associated with my domain changes with GoDaddy, and there were a lot of those.  Have no idea as to why only those were resistant to moving but I can get all that data from GoDaddy anyway.
    This thread is now moot seeing as how I've recovered everything I can and am going to just move on - and back up more often.  ;-)
    Apple and Mail need to rewrite that program to include a WARNING MESSAGE when deleting an Account in Mail that says ALL YOUR MESSAGES ARE GOING TO DISAPPEAR NEVER TO RETURN IF YOU DELETE THIS ACCOUNT, SO YOU DANG WELL BETTER HAVE A BACK UP IF YOU WANT TO KEEP ANYTHING BEFORE PRESSING THAT MINUS SYMBOL!  ;-)

Maybe you are looking for