To send mail for cancelled jobs in SM37 to basis team using workflow.
Dear All,
I have a requirement to implement a workflow that will trigger a mail to basis team if there are any jobs with status Cancelled.
I found a business object type 'BPJOB' which has an event Cancelled. I tried to test if the workflow is triggered when a job is cancelled using transaction SWELS. But it doesnt trigger any workflow.
I tried finding a BADI/EXIT but there are no enhancements present for the transaction.
We already have a report which will trigger an email to the concerned basis person when the job is cancelled but the client wants it using a workflow.
I need to know whether there are any other ways to fulfill this reqt using workflow?
Thanks & Regards,
Supriya M.
Hi SM
try using BPJOB_SMAN, which is an object for Schedule Manager.
check if it throws any event of BPJOB_SMAN.
If yes, then use a WF which would send/notify mail to BASIS.
Hope it helps.
Aditya
Similar Messages
-
How to check who has cancel jobs in SM37
Hello every one.
Can any one explain how to check who has cancel jobs in SM37(job overview).
Is it possible to know such logs.
In sm37 its only gives details about jobs what ever.
Thanks & Regards.hi.
Use SM 36 for creating the job...and SM 37 for displayin the job...here
u can see some details such as job name,job modifier name,modified date from which date to which date....but u must know the job name den only u can find the modifier name there...
it is possible to know such logs.....
select the job..in that screen job log button is there..select the button,can get the job log ..ie start time and end time and some other informations..
hope this helps u..
assign sum points if applicable...
regards,
ramanan -
Problem in sending mail for a pop3 account using transport.send(msg)
hi,
i am having problem in not able to send mail for a pop3 account ...
I have written an email gateway which listens to my pop3 account...on email arrival it listens nd extract the contents and send it as an sms msg...upon failure it needs to deliver the mail to sender id.I am using quartz to listen.
i am using jboss for server and java mail api.
here is my code
MimeMessage mimemsg = new MimeMessage(session);
mimemsg.setFrom();
mimemsg.setRecipients(Message.RecipientType.TO, to);
mimemsg.setSubject(subject);
mimemsg.setText(parsedText);
mimemsg.setSentDate(new Date());
mimemsg.setContent(strBuff.toString(), "text/html");
System.out
.println("Before sending mail");
Transport.send(m);
System.out.println("message sent successfully");
excepition i am getting is :
2008-09-12 11:45:11,140 INFO [STDOUT] Before sending mail
2008-09-12 11:45:11,140 ERROR [STDERR] javax.mail.IllegalWriteException: POP3 messages are read-only
2008-09-12 11:45:11,140 ERROR [STDERR] at com.sun.mail.pop3.POP3Message.saveChanges(POP3Message.java:438)
2008-09-12 11:45:11,140 ERROR [STDERR] at javax.mail.Transport.send(Transport.java:97)
2008-09-12 11:45:11,140 ERROR [STDERR] at com.openstream.emailgateway.sources.ListenEmailGateway.execute(ListenEmailGateway.java:422)
2008-09-12 11:45:11,140 ERROR [STDERR] at sun.reflect.GeneratedMethodAccessor89.invoke(Unknown Source)
2008-09-12 11:45:11,140 ERROR [STDERR] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
2008-09-12 11:45:11,140 ERROR [STDERR] at java.lang.reflect.Method.invoke(Method.java:585)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.ejb.MessageDrivenContainer$ContainerInterceptor.invoke(MessageDrivenContainer.java:495)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.ejb.plugins.MessageDrivenInstanceInterceptor.invoke(MessageDrivenInstanceInterceptor.java:116)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.ejb.plugins.RunAsSecurityInterceptor.invoke(RunAsSecurityInterceptor.java:109)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.ejb.MessageDrivenContainer.internalInvoke(MessageDrivenContainer.java:402)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.ejb.Container.invoke(Container.java:960)
2008-09-12 11:45:11,140 ERROR [STDERR] at sun.reflect.GeneratedMethodAccessor88.invoke(Unknown Source)
2008-09-12 11:45:11,140 ERROR [STDERR] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
2008-09-12 11:45:11,140 ERROR [STDERR] at java.lang.reflect.Method.invoke(Method.java:585)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
2008-09-12 11:45:11,140 ERROR [STDERR] at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.ejb.plugins.inflow.MessageEndpointInterceptor.delivery(MessageEndpointInterceptor.java:263)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.ejb.plugins.inflow.MessageEndpointInterceptor.invoke(MessageEndpointInterceptor.java:140)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.proxy.ClientMethodInterceptor.invoke(ClientMethodInterceptor.java:74)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
2008-09-12 11:45:11,171 ERROR [STDERR] at $Proxy73.execute(Unknown Source)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.jboss.resource.adapter.quartz.inflow.QuartzJob.execute(QuartzJob.java:57)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
2008-09-12 11:45:11,171 ERROR [STDERR] at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2008-09-12 11:45:11,171 INFO [STDOUT] USer flag ..[Ljava.lang.String;@115c6cbas i am writing the message failure details to a template...
//on failure to send messages , reply to the sender about the failure
strBuff= tempDetail.writeToTemplate(smsmsg);
is that bcoz i am getting an exception -
Notifications failed to send mail for journal approval with attachments
Issue : Notifications failed to send mail for journals sent for approvals with attachments.
Error :
[WF_ERROR] ERROR_MESSAGE=3835: Error '-6502 - ORA-06502: PL/SQL: numeric or value error: character string buffer too small' encountered during execution of Generate function 'WF_XML.Generate' for event 'oracle.apps.wf.notification.send'. ERROR_STACK=
WF_XML.GetAttachments(71009549, http://vfilvappclone.verifone.com:8000/pls/EBIZRPT, 13525)
WF_XML.GenerateDoc(oracle.apps.wf.notification.send, 71009549)
WF_XML.Generate(oracle.apps.wf.notification.send, 71009549)
WF_XML.Generate(oracle.apps.wf.notification.send, 71009549)
Wf_Event.setMessage(oracle.apps.wf.notification.send, 71009549, WF_XML.Generate)
Wf_Event.dispatch_internal()
Cause : Above error is thrown for Journals with attachment of file type Microsoft Office Excel Macro-Enabled Worksheet (.xlsm)
Can anybody help with this?Please post the details of the application release, database version and OS.
Please see if these docs help.
ORA-20001 & ORA-06502 Workflow Errors [ID 761638.1]
Manager Approval Notification Gives Error: Ora-O6502: Pl/Sql: Numeric Or Value Error: Character String Buffer Too Small [ID 352213.1]
Approval Confirmation Email Is Not Received By Preparer - ERROR_MESSAGE=3835 ORA-20001 ORA-6502 [ID 465146.1]
Notification Fails To Be Generated When A DOCX Document Is Attached [ID 1058183.1]
Not Able To Send Multiple E-Mails Upon Approval Of Purchase Order [ID 333719.1]
Expenses Workflow Error: "ORA-06502: PL/SQL: numeric or value error: associative array shape is not consistent with session parameters has been detected in fnd_global.put(CONC_LOGIN_ID,-1)" [ID 455882.1]
Using Microsoft Office 2007 and 2010 with Oracle E-Business Suite 11i and R12 [ID 1077728.1] -- Notification Generation Fails
ORA-06502 Buffer Too Small Error in Contracts Workflow Notification [ID 870712.1]
Thanks,
Hussein -
Not send mail for external domains
Hi,
I have installed OCS 10g(10.1.2) in linux. All components ok, but i not send mail for external domain.
Att,
MestiI remember in version 9.0.2 that i configure in SMTP_OUTBOUND the IP of DNS external to send mail for other domains.
Mesti -
Workflow to send mail for purchase requisation and approval msg which automatically updates sap
I am new to workflow,I need to create work flow for purchase requisation and send mail for concern person for approval,like if he clicks approve in mail ,automatically it should get updated in sap if he rejects then he should enter reason for rejection
pls help...Hi Surya,
SAP had provided you with a standard WF template for PR. You only have to activate it. The workflow template is WS20000077. In this what you have to do is, make all the tasks in this
WF as a general task. For that go to each activity and double click on the task ID. Then from within the task go to menu Additional Data->Agent Assignment->Maintan. Then slect the task and press Attributes and select general task. This will ask for a customizing request. Do this for all task.
The give event linkage by going to the Basic Data of the workflow and give binding. This will fulfill
your requirement.
Regards,
Abijith -
Trigger mail for cancelled background jobs scheduled using SM37
Dear Experts,
My requirement is to trigger email whenever a job gets cancelled in background.
For this I have already tried creating a workflow using BO BPJOB for event ABORTED.
But for some reason the event is never getting triggered.
I tested executing the workflow from tcode SWDD, it was running successfully, which means that there is no issue with my workflow.
Now I want to resolve the above issue OR
I want to raise the event manually from the program through some BADI or Exit.
But I didn't find any BADI or Exit for tcode SM37. Can anybody let me know if any.Hi,
Please refer the below links.
Workflow- Background job fail
Re: Send mail when job fails
Regards
GK.
Moderator message: please do not post just links without any further explanations.
Edited by: Thomas Zloch on Sep 20, 2010 11:53 AM -
Things were going well. Mail was working fine and then the following error message appears out of nowhere. I had not changed any settings. From that point on all efforts to send mail failed, and the error message appeared even thought I used the password to log back in after I quit. Now, an hour after the problem started it takes my password (on the second try after the error message appears) once and sends a test message. Then, one minute later it gives the error message again and refuses to send anything. Why is mail so inconsistent? What can I do in the future to address the problem?
Error message reads "The SMTP server "xxxxx" rejected the password for user "xxx" Please re-enter your password or cancel.
When mail does work again. Should I click the remember this password in keychain or am I just asking for more trouble?
I'm writing this using my IMac computer in a different room. The error also occurs on my powerbook running my new MacBook Pro 12 inch.
Fed up Mac user.I"m no expert but this used to happen to me all the time (stop downloading, asking for my password, nothing downloading, walking away- 24 hours or more later, all is fine, only to later start all over again)
Well, i gave up for a long time and stopped using that account with mac mail and only accessed it online..recently went and changed the pop3 to only pop and now it works beautifully and seamlessly. Don't ask me why or how, but it does so thought I'd share. -
Convert Spool to PDF and mail for the jobs not run in background.
Dear All,
I need to convert the spool job into pdf and mail as attachment for job not run in background.
I am printing the bills using the program SD70AV3A to print the bills in a batch using the SUBMIT.
But i am not using the spool options since its going to into waiting state in spool...and i need to change the printer properties to G
to get the printer to print the reports as these jobs run in backgroud....but this solution is not acceptable solution.
SUBMIT SD70AV3A
WITH RG_KSCHL-LOW = 'ZRR'
WITH RG_NACHA-LOW = '1'
WITH PM_VERMO = '2'
WITH PM_NSORT = '1'
WITH RG_VBELN IN range.
* TO SAP-SPOOL
* SPOOL PARAMETERS print_parameters
* WITHOUT SPOOL DYNPRO
* VIA JOB name NUMBER number
* AND RETURN.
so how do i get the spool number from the above after the job is submitted....and then convert into pdf and mail
please suggest some solution. I have searched on net but most the solutions are say to run the job as background job...
i have also looked into the program RSTXPDFT4 but it asks for the spool id ....how can i get spool id for the job that has been completed.
please suggest some solution.
Thanks
Bhargava.Hi,
Spool to PDF : FM 'CONVERT_ABAPSOOLJOB_2_PDF'
Table TSP01 to get spool number
You ,may need to convert OTF to PDF: FM CONVERT_OTF
and the to binary : FM 'SMCS_XSTRING_TO_BINARY'
To send mail use class: cl_document _bcs.
Regards,
Maria João Rocha -
Unable to Cancel Job in SM37 (R3)
Dear Guys,
Regards.We got a situation :Unable to Kill the Background job (BI_REQ*).It shows "ACTIVE" and been running for more than 19,000 secs (2 days..) .When this job started ,the PROCESS ID was : 244277..But after a day,this PROCESS ID : 244277 has been allocated to some other R3 Program(Monitored in SM50).But the Background Job is still "ACTIVE".Tried killing the Job in SM37--->Cancel Active Job or Delete the Job) but ,when tried to "Cancel" the Job,we get a message : The job is NOT ACTIVE !!!. Then when tried to "DELETE" the job ,we get a message " Job is still ACTIVE"......!!!!
>Since there is no Work Process in SM50,what is the alternative solution to Kill this Job..........???
(In BW ,there is no Update of data records,with the monitor showing RED)....
Guys,would appreciate your time and help on this................
Manythanks
ArunHi.......
Go to SM37 >> select the job >> Click on the JOB tab in the top >> Click on Check status............
Then it status will show cancel...........
Actually sometimes it happens job gets cancelled but staus shows active....then we need to do this..........actually job is already cancelled......
Hope this helps you.......
Regards,
Debjani..... -
Setting Up Mailserver to received and Send Mail for external Network
I have a G5 currenty running 10.3.9 Server with Mail services run and working fine, we are upgrading to 10.4 Server and would like our Sales Reps the ability to send and Receive mail from outside the office. How do I configure my server, Router, ISP and/or Mail clients to do this??? we are currently able to recieve mail from outside just not send.
I cannot find the Line #submission inet n - n -- smtpd in the Main.CF file...here is what I get when I open it
# Global Postfix configuration file. This file lists only a subset
# of all 250+ parameters. See the sample-xxx.cf files for a full list.
# The general format is lines with parameter = value pairs. Lines
# that begin with whitespace continue the previous line. A value can
# contain references to other $names or ${name}s.
# NOTE - CHANGE NO MORE THAN 2-3 PARAMETERS AT A TIME, AND TEST IF
# POSTFIX STILL WORKS AFTER EVERY CHANGE.
# SOFT BOUNCE
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#soft_bounce = no
# LOCAL PATHNAME INFORMATION
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
queue_directory = /private/var/spool/postfix
# The command_directory parameter specifies the location of all
# postXXX commands.
command_directory = /usr/sbin
# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
daemon_directory = /usr/libexec/postfix
# QUEUE AND PROCESS OWNERSHIP
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
mail_owner = postfix
# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#default_privs = nobody
# INTERNET HOST AND DOMAIN NAMES
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#myhostname = host.domain.tld
#myhostname = virtual.domain.tld
# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#mydomain = domain.tld
# SENDING MAIL
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# [email protected].
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#myorigin = $myhostname
#myorigin = $mydomain
# RECEIVING MAIL
# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
# Note: you need to stop/start Postfix when this parameter changes.
#inet_interfaces = all
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4
# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see sample-virtual.cf).
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# sample-smtpd.cf).
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#mydestination = $myhostname, localhost.$mydomain
#mydestination = $myhostname, localhost.$mydomain $mydomain
#mydestination = $myhostname, localhost.$mydomain, $mydomain,
# mail.$mydomain, www.$mydomain, ftp.$mydomain
# REJECTING MAIL FOR UNKNOWN LOCAL USERS
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination and $inet_interfaces.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
# - You define $mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
# For example, you define $mydestination domain recipients in
# the $virtual_mailbox_maps files.
# - You redefine the local delivery agent in master.cf.
# - You redefine the "local_transport" setting in main.cf.
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see sample-local.cf).
# Details are described in the LOCAL_RECIPIENT_README file.
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a [email protected] address.
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
#local_recipient_maps =
# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# $inet_interfaces, while $local_recipient_maps is non-empty and the
# recipient address or address local-part is not found.
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#unknown_local_recipient_reject_code = 550
unknown_local_recipient_reject_code = 450
# TRUST AND RELAY CONTROL
# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in file sample-smtpd.cf.
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host
# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#mynetworks = 168.100.189.0/28, 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table
# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions restriction in the
# file sample-smtpd.cf for detailed information.
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction in the file sample-smtpd.cf.
#relay_domains = $mydestination
# INTERNET OR INTRANET
# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
# If you're connected via UUCP, see also the default_transport parameter.
#relayhost = $mydomain
#relayhost = gateway.my.domain
#relayhost = uucphost
#relayhost = [an.ip.add.ress]
# REJECTING UNKNOWN RELAY USERS
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a [email protected] address.
#relay_recipient_maps = hash:/etc/postfix/relay_recipients
# INPUT RATE CONTROL
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 50 SMTP server process
# limit, this limits the mail inflow to 50 messages a second more
# than the number of messages delivered per second.
# Specify 0 to disable the feature. Valid delays are 0..10.
#in_flow_delay = 1s
# ADDRESS REWRITING
# Insert text from sample-rewrite.cf if you need to do address
# masquerading.
# Insert text from sample-canonical.cf if you need to do address
# rewriting, or if you need username->Firstname.Lastname mapping.
# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
# Insert text from sample-virtual.cf if you need virtual domain support.
# "USER HAS MOVED" BOUNCE MESSAGES
# Insert text from sample-relocated.cf if you need "user has moved"
# style bounce messages. Alternatively, you can bounce recipients
# with an SMTP server access table. See sample-smtpd.cf.
# TRANSPORT MAP
# Insert text from sample-transport.cf if you need explicit routing.
# ALIAS DATABASE
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#alias_maps = dbm:/etc/aliases
#alias_maps = hash:/etc/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases
# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#alias_database = dbm:/etc/aliases
#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
# ADDRESS EXTENSIONS (e.g., user+foo)
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#recipient_delimiter = +
# DELIVERY TO MAILBOX
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#home_mailbox = Mailbox
#home_mailbox = Maildir/
# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail
# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#mailbox_command = /some/where/procmail
#mailbox_command = /some/where/procmail -a "$EXTENSION"
# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#mailbox_transport = lmtp:unix:/file/name
#mailbox_transport = cyrus
# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#fallback_transport = lmtp:unix:/file/name
#fallback_transport = cyrus
#fallback_transport =
# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown@$mydestination
# and unknown@[$inet_interfaces] is returned as undeliverable.
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
# luser_relay works only for the default Postfix local delivery agent.
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#luser_relay = [email protected]
#luser_relay = [email protected]
#luser_relay = admin+$local
# JUNK MAIL CONTROLS
# The controls listed here are only a very small subset. See the file
# sample-smtpd.cf for an elaborate list of anti-UCE controls.
# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
# For details, see the sample-filter.cf file.
#header_checks = regexp:/etc/postfix/header_checks
# FAST ETRN SERVICE
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# By default, Postfix maintains deferred mail logfile information
# only for destinations that Postfix is willing to relay to (as
# specified in the relay_domains parameter). For other destinations,
# Postfix attempts to deliver ALL queued mail after receiving the
# SMTP "ETRN domain.tld" command, or after execution of "sendmail
# -qRdomain.tld". This can be slow when a lot of mail is queued.
# The fast_flush_domains parameter controls what destinations are
# eligible for this "fast ETRN/sendmail -qR" service.
#fast_flush_domains = $relay_domains
#fast_flush_domains =
# SHOW SOFTWARE VERSION OR NOT
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)
# PARALLEL DELIVERY TO THE SAME DESTINATION
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.
#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 10
# DEBUGGING CONTROL
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
debug_peer_level = 2
# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain
# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
xxgdb $daemon_directory/$process_name $process_id & sleep 5
# If you don't have X installed on the Postfix machine, try:
# debugger_command =
# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
# >$config_directory/$process_name.$process_id.log & sleep 5
# INSTALL-TIME CONFIGURATION INFORMATION
# The following parameters are used when installing a new Postfix version.
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
sendmail_path = /usr/sbin/sendmail
# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
newaliases_path = /usr/bin/newaliases
# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
mailq_path = /usr/bin/mailq
# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
setgid_group = postdrop
# manpage_directory: The location of the Postfix on-line manual pages.
manpage_directory = /usr/share/man
# sample_directory: The location of the Postfix sample configuration files.
sample_directory = /usr/share/doc/postfix/examples
# readme_directory: The location of the Postfix README files.
readme_directory = /usr/share/doc/postfix
# THE FOLLOWING DEFAULTS ARE SET BY APPLE
# bind to localhost only
inet_interfaces = all
# turn off relaying for local subnet
mynetworks_style = host
# mydomain_fallback: optional domain to use if mydomain is not set and
# myhostname is not fully qualified. It is ignored if neither are true.
mydomain_fallback = localhost
myhostname = jamestownpress.com
mailbox_transport = cyrus
enable_server_options = yes
luser_relay =
maps_rbl_domains = dun.dnsrbl.net
message_size_limit = 0
mydestination = $myhostname,localhost.$mydomain
smtpd_use_tls = no
smtpd_enforce_tls = no
smtpd_tls_loglevel = 0
smtpd_sasl_auth_enable = yes
smtpd_use_pw_server = yes
smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,permit
smtpd_pw_server_security_options = plain
server_enabled = 1
relayhost =
smtpd_client_restrictions = permit_mynetworks reject_rbl_client dun.dnsrbl.net permit
always_bcc =
mynetworks = 127.0.0.1/32,192.168.0.0/16,192.168.1.98,192.168.1.3,192.168.1.13,192.168.1.5,1 92.168.1.22,192.168.1.18,192.168.1.41
content_filter = smtp-amavis:[127.0.0.1]:10024
so what do I need to change -
Q: Send Mail for TRADITIONAL CHINESE_TAIWAN.ZHT16BIG5
I have an oracle database 8.1.7 , NLS_LANG is TRADITIONAL CHINESE_TAIWAN.ZHT16BIG5 and Using Pl/sql Package to send mail, I can't send Chinese from mail package, This is my problem.
nullThe original SMTP protocol requires that the email to be in pure ASCII. To send email in Chinese, you may either use 8bit-MIME extension (if your SMTP server supports it, which is supported quite commonly these days) and send the email as-is, or encode your email that contain non-ASCII in one of the few MIME encoding scheme (e.g. Base-64, Quote-Printable) so that the encoded form is in pure ASCII.
The following is an example that send email using 8bit-MIME extenstion:
Rem
Rem mb_smtp.sql - Demo program to show how to send non-ASCII (including
Rem multi-byte) e-mails over the SMTP protocol using the UTL_SMTP package.
Rem It requires the remote SMTP server to support 8bit-MIME SMTP extension
Rem (which many SMTP servers support nowadays).
Rem
DECLARE
-- A signature that will appear in the mail's MIME header. Useful for
-- versioning.
AGENT_SIGNATURE CONSTANT VARCHAR2(100) := 'Oracle 8i - UTL_SMTP';
-- SMTP server
SMTP_SERVER CONSTANT VARCHAR2(256) := 'smtp.some-domain.com';
TYPE vc2_table IS TABLE OF VARCHAR2(256) INDEX BY binary_integer;
conn utl_smtp.connection;
sender VARCHAR2(256);
recipients vc2_table;
-- Helper procedure to set a MIME header
PROCEDURE mime_header(conn IN OUT NOCOPY utl_smtp.connection,
name IN VARCHAR2,
value IN VARCHAR2) AS
BEGIN
utl_smtp.write_data(conn, name | | ': ' | | value | | utl_tcp.CRLF);
END;
PROCEDURE mime_header_continue(conn IN OUT NOCOPY utl_smtp.connection,
value IN VARCHAR2) AS
BEGIN
utl_smtp.write_data(conn, ' ' | | value | | utl_tcp.CRLF);
END;
-- Helper function to generate full email signature. Format of
-- is '"First-name Last-name" <email-address>'
FUNCTION get_full_signature(userid IN VARCHAR2) RETURN VARCHAR2 AS
BEGIN
RETURN '"' | | userid -- can use LDAP to find full name of recipient here
| | '" <' | | userid | | '>';
END;
-- Begin a mail connection:
-- conn - SMTP connection
-- sender - sender's email addr (our server allows bogus address
-- as long as it is a full email address ([email protected]).
-- recipients - recipients's user IDs
-- subject - email subject
-- mime_type - MIME type ('text/plain' - plan text, 'text/html' - HTML)
-- RETURN:
-- FALSE when shouldn't continue because:
-- 1. zero recipients
-- 2. mail server is down
-- TRUE when the caller should proceed.
FUNCTION begin_mail(conn OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN vc2_table,
subject IN VARCHAR2,
mime_type IN VARCHAR2) RETURN BOOLEAN IS
replies utl_smtp.replies;
eight_bit_mime_support BOOLEAN;
BEGIN
IF (recipients.count <=0) THEN
RETURN FALSE;
END IF;
BEGIN
conn := utl_smtp.open_connection(SMTP_SERVER);
EXCEPTION
WHEN utl_smtp.transient_error THEN
RETURN FALSE; -- SMTP server not available
END;
-- open SMTP connection
replies := utl_smtp.ehlo(conn, 'some-domain.com');
eight_bit_mime_support := FALSE;
FOR i IN 1..replies.count LOOP
IF ((replies(i).code < 200) OR (replies(i).code > 299)) THEN
RAISE program_error; -- SMTP server doesn't support EHLO command
END IF;
IF replies(i).text = '8BITMIME' THEN
eight_bit_mime_support := TRUE;
END IF;
END LOOP;
IF (NOT eight_bit_mime_support) THEN
RAISE program_error; -- no 8bit-MIME support
END IF;
-- specify sender's address (our server allows bogus address
-- as long as it is a full email address ([email protected]).
utl_smtp.mail(conn, sender);
-- specify recipient(s) of the email.
FOR i IN 1..recipients.count LOOP
utl_smtp.rcpt(conn, recipients(i));
END LOOP;
-- start body of email
utl_smtp.open_data(conn);
-- Set "From" MIME header
mime_header(conn, 'From', get_full_signature(sender));
-- Set "To" MIME header. Overflow 2nd and following recipients
-- to separate lines to avoid hitting SMTP line-size limit.
IF (recipients.count = 1) THEN
mime_header(conn, 'To', get_full_signature(recipients(1)));
ELSE
mime_header(conn, 'To', get_full_signature(recipients(1)) | | ',');
FOR i IN 2..recipients.count LOOP
mime_header_continue(conn, get_full_signature(recipients(i)));
IF (i < recipients.count) THEN
mime_header_continue(conn, get_full_signature(recipients(i)) | |
ELSE
mime_header_continue(conn, get_full_signature(recipients(i)));
END IF;
END LOOP;
END IF;
mime_header(conn, 'Subject', subject); -- Other SMTP headers
-- Content-type MIME headers
mime_header(conn, 'Content-Type', mime_type);
mime_header(conn, 'X-Mailer', AGENT_SIGNATURE);
-- Priority:
-- 1, 2 - High
-- 3 - Normal
-- 4, 5 - Low
mime_header(conn, 'X-Priority', 1);
-- This empty line denotes end of MIME headers and beginning of message
-- body. Don't remove.
utl_smtp.write_data(conn, utl_tcp.CRLF);
RETURN TRUE;
END;
-- Write actual ASCII message body (plain text or HTML). Can be called
-- repeatedly.
PROCEDURE write_body(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2) AS
BEGIN
utl_smtp.write_data(conn, data);
END;
-- Write actual non-ASCII (including multi-byte) message body.
-- Can be called repeatedly.
PROCEDURE write_mb_body(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2) AS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(data));
END;
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) AS
BEGIN
utl_smtp.close_data(conn);
utl_smtp.quit(conn);
END;
BEGIN
-- Sender
sender := '[email protected]';
-- List of mail recipients (userids).
recipients(1) := '[email protected]';
IF (begin_mail(conn, sender, recipients, 'Mail subject',
'text/plain; charset=big5')) THEN
-- Send plain text mail content.
write_body(conn, 'line 1.' | | utl_tcp.CRLF);
write_body(conn, 'line 2.' | | utl_tcp.CRLF);
write_body(conn, 'line 3.' | | utl_tcp.CRLF);
write_mb_body(conn, 'line 1 <some multi-byte text> 1i>G$M.' | |
utl_tcp.CRLF);
-- End mail.
end_mail(conn);
END IF;
EXCEPTION
-- In begin_mail, utl_smtp.transient_error exception is trapped if
-- the SMTP server is not available. If other error occurs (e.g. the
-- the mail is rejected because bad sender address), trap the
-- exception, do something and close the connection.
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
utl_smtp.quit(conn);
END;
null -
Script for database send mail for tablespace threshold 90%
Dear All,
Scripts required for send mail from database for following events
1.Tablespace Threshold
2. Db Shutdown & Startup
Database Version : 10.2.0.1.0
OS :- Linux
Thanks & Regards,
Praful KawajiYou have Database Control.
Database Control can already do this.
Why do you want to remain in the Stone Age and continue to use scripts?
Why do you want to reinvent the wheel, when the functionality is already there.
Agreed, you would have to read documentation and/or help text, and you rather don't want to do that.
Which is the exact cause why you want to reinvent the wheel, and pay Larry for functionality you don't use.
Sybrand Bakker
Senior Oracle DBA -
hi
is there any standard function module to send mail to the receipients if any idocs has been failed during the process.
Please revert back.
Points will be awarded for the appropriate answers.
Thanks & Regards
Varalakshmi.KVaralakshmi,
In your partner profile we20 , you can set the agent who should receive the failure.
Please check the tab post processing permitted agent.
The agents should be maintained in the transaction PPOME.
For docs, please go to
www.sapgenie.com
Thanks
Ganesh.S -
Hi ,
I have a requirement in which I have to create a report that should pickup all the cancelled CRM marketing jobs (due to whatever reason) based on on job name, copy them and restart them.
In your selection screen, you will give the cancelled job name (wildcard acceptable..like ZE00*) and a radio button to show the cancelled job list and copy the jobs.
Could anyone guide me on how to go ahead with this report?
Regards,
MohitHi,
in table TBTCO and TBTCP you have all jobs with current status. You can search them by name.
Selected jobs you can "popup_with_table" FM. Then you need to use fm to submit job in ackground;
'JOB_OPEN', 'JOB_SUBMIT' and 'JOB_CLOSE'.
Good luck !
Maybe you are looking for
-
PreE V8: Clips not displaying in project view
I have a clip in the my timeline/sceneline that is not displaying in Project view. It also does not have the "P" in the bottom corner of the thumbnail in Organizer view. Why isn't the clip considered part of the project?
-
How To Execute an Oracle 10g SProc using VS 2005, for Reporting Services
Good day! :-) Anybody who knows the syntax for executing an Oracle Stored Proc thru ODBC connection using VS 2005 for Reporting Services? I am having a problem about this. I am using the ODBC connection because VS 2005 does not support Oracle Databas
-
On the subject of bookmarks... The following procedure works for deleting bookmarks on my MacBook Pro, my iMac, and my Mac mini... If the bookmark is itself a tab on the toolbar, right click on it and select delete by highlighting delete in the drop
-
Change in maintanence view sort order
I have a requirement where i need to change the sort order of the way the data is displayed in the view. Ex if the primary key has A,B,C and D. the data is sorted in the order A,B,C and D but i need to show the sorted data as per B,C and D without ch
-
Problem: Copy&Paste DocumentSizeFilter not working when pasting from Word
Dear all, I have an application (Ekit HTML Editor) that I am customizing to satisfy my needs: I need a DocumentSizeFilter to stop the users from entering too much information. The filter already works when I paste plain text from other Windows applic