To sent messages to Team Suite using PC Suite and ...

Hi
Can anyone guide me as to how to send the group message
from Nokia E50 from PC.
Thanks & Regards
TRL

Hi,
What kind of messages would you like to send? SMS, MMS, E-Mail?
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8

Similar Messages

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried ch

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

Everytime I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone. What is the solution? The cable is fine and is the original charger!

Every time I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone. What is the solution? The cable is fine and is the original charger!

Hello teachermama10, The Factory Data Reset does remove all data including files and photos. I understand that making sure your phone information is backed up is of the upmost importance. You can ensure your phone data is backed up using these links: http://vz.to/1uM5mwZ and http://vz.to/1vEzYok. You can also try our great Verizon Cloud feature as an option for backing up and syncing your phone info! Check it out: http://vz.to/1s4GctA.
TanishaS1_VZW
Follow us on Twitter @VZWSupport

Show Sent Messages in Mail thread (using gmail and imap)

I'm trying to get my email set up so that I can use gmail imap and also have it show my sent emails within each thread. I can see it within "all mail" but not within my "inbox." Also, ever since I started screwing around with the settings my inbox now takes forever to upload mail or to register that I have read it on my laptop and when I send something from my iphone it shows up on my browser's gmail as "sent mail" which it never used to do. I'm just frustrated and would love for someone to tell me their settings if they're getting the thread view to work well and for a quick refresh! Thanks so much!!!!

I have a similar problem where the threaded messages feature does not work for me unless I reply from my iPhone. If I login to gmail from my computer and reply from the web browser the message will not be in the thread.
I just want my emails to be threaded just like they are in GMail in my web browser.

Cannot uninstall PC Suite using PC Suite Cleaner!

My PC Suite Installation 6.86.9.0 was not working properly anymore so I uninstalled it and attempted to re-install.
However the uninstall apparently was incomplete such that the installer complained about it and stopped.
PC Suite Cleaner (3.6.002)(does not resolve the problem either since in cannot operate on the installed PC Suite version!
Any help appreciated.
Kind regards, Waldemar

Playing within the registry of XP can be quite dangerous. Have you tried rebooting your computer? Try to install pc suite again after a reboot.
If not, open the list of installed programs and find pc suite (if it's still shown in there of course) and uninstall it. I guess it will come with a message that it might already be uninstalled but hopefully it will remove the entry there if there is one no matter what error message pops up.
Then install ccleaner and remove all trash and run a registry scan on it. Hopefully this would remove all corrupted or invalid entries and maybe fix it. It's at least a safer way to remove dead ends in the registry than doing it your self.
Reboot the computer and try to install the pc suite again.

Missing Messages in Outlook 3013 using Windows 7 and Gmail

I have configured my Gmail account taking heed of settings recommended by MS and Gmail and everything appears to be working but I regularly lose messages from the folders Sent and Inbox. I know messages were sent as they are included in the replies I have
received and all my messages are in Gmail when I access the account on the web but those same messages are not in Outlook. I have seen similar posts relating to Outlook 2010 but frankly the only fix that seemed to get a thumbs up was in regard to folders NOT
individual messages. I am starting a business and bought a full Office 2013 Pro version so I don't wany to ignore Outlook and its integral part of office and revert to Gmail for email handling
Can anyone help without getting into programming issues which I would not be experienced enough to implement?

You have asked your Gmail question in a Microsoft Exchange forum. I recommend that you post this in the Outlook Forum:
http://social.technet.microsoft.com/Forums/en-US/outlook/threads But, quite frankly, I don't know that you're going to get much help with that request.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

How to specify a cipher suit used between plugin and weblogic server?

I install Weblogic8.1 SP3 which supports for strong cipher suits, and config an apache 2.50 server as an front end.
I config appache to use 2 way SSL with browser and wls one way SSL with apache plugin. Then config apache to forward client certs to WLS. now the problem is, I can see that the SSL connection between browser and apache uses a strong cipher suit('SSL_RSA_WITH_RC4_128_MD5'), but the ssl connection bwtween apache plugin and WLS uses a weak cipher suit('SSL_RSA_EXPORT_WITH_RC4_40_MD5'), with the SnoopServlet, although I use the mod_wl128_20.so module. How can I increase the cipher strength of SSL between WLS and it's apache plugin?
Thanks in advance.
Best
Regards
Jean

Hello Gunaseelan,
This is not possible because WLS 6.1 needs a config.xml file, exactly this
name, to start.
What you can do is to define a recovery domain, called myrecovery_domain for
instance, and put the config_recovery.xml, renamed "config.xml".
Hope this helps,
Ludovic.
Developer Relations Engineer
BEA Support.
"Gunaseelan Venkateswaran" <[email protected]> a écrit dans le message
news: 3cd6a324$[email protected]..
>
Hi,
I have 2 weblogic startup scripts (startWebLogic.sh and
startWebLogic_recovery.sh) for the same domain.
startWebLogic.sh uses config.xml file.
I would like to use config_recovery.xml as the configuration file forstartWebLogic_recovery.sh
>
>
How would I do this ?
I am using WebLogic Server 6.1 on SunOS 5.8 / HP-UX 11.0.
Appreciate any help.
Regards
Gunaseelan Venkateswaran

Error Message for Videos when using 2 computers and 1 iPod Nano 5th Gen

I have a 5th Gen iPod Nano and a PC (XP) and Laptop (Vista). I store my free digital copies of movies on the Laptop and all other media on the PC. I have both computers set to share iTunes libraries. When I tried to sync some TV shows from the PC to the Nano I got this error message: The iPod "xxxx" is currently linked to another iTunes library on the computer "xxxx". In order to copy the TV Show "xxxx" to this iPod you must link this iPod with this iTunes library. Doing so will remove 3 movies including 'xxxx' from this iPod.
Questions: 1)Why only videos and not music or podcasts? No problems with any other syncing and don't lose my music from the PC when I sync movies from the laptop. 2)Is there a fix for this?
I was able to do a work-around by copying the TV shows to a USB memory device and then transfering them to the iTunes on the laptop. I could then sync both the movies and the TV shows to the Nano.
I'm new at this iPod stuff and would appreciate your input.
Thanks.

Does this problematic song play okay in iTunes? Have you tried removing and resyncing it to your device via iTunes?
B-rock

Mail Rules Stopped Applying to Sent Messages Since October 15th 2013.

Has anyone had a similar experience, or has anyone some idea of what could be done to return the applicability of rules to sent items?
I'm using OS X's native mail client, Mail. I'm now on Mavericks but the rules that had been working for over a year suddenly stopped working on sent items on the 15th of October 2013 before I upgraded, when I was still running Mountain Lion, so it's not Mavericks' fault.
Thank you to anyone who takes the time to suggest any ideas they might have.

Thank you for the link - I had found and read that particular article while doing google research into the problem - it was only after I couldn't find a solution to (or even an explaination of) the problem that I posted this question - it's a very clear article though so I was happy to read it again.
I understand that people using Mail to handle their Gmail accounts do have all sorts of problems related, perhaps, to not having fully understood carefully researched workarounds that I remember reading and instigating for myself about 3+ years ago. As I said, this resulted in a setup that has had the flexibility to adapt itself flawlessly to my varing requirements since. Perhaps I was fortunate in this regard and I expect that, by striving to achieve my requirements by structuring mailboxes and rules to be as simple as possible, I avoided the vicissitudes that you and I have both read about.
I made no changes to my Gmail accounts, nor to Mail itself, that could have precipitated the cessation of my rules' influence on sent messages. I never use Gmail itself in fact - I only ever send and read through Mail.
I know I posted this question under the 'Mavericks' section but, as I tried to make clear, the problem was not caused by upgrading to Mavericks - it started before then. I had not tried any of the betas, nor did I knowingly install any upgrade of Mail prior to the change in behaviour (I upgrade manually).
In short, whilst I would not expect Mail to apply rules to messages sent directly with Gmail (since Mail would have to read them back in again through IMAP, successfully recognise them as 'sent' and then retrospectivly apply rules), I do expect it to be able to continue applying rules to its own sent messages.

How Can I Retain Sent Messages When Re-Doing Email?

i would like to delete an email account and re-add it to fix something but i don't want to lose my sent messages. i know incoming message will be retained as they stay on the server. i called bb support and a level one person told me that my sent messages are synced with my mail server and will still be on the server. uh this is so not true. maybe it is for IMAP or Outlook but not with POP3.
i would like the retain my sent messages on my phone and not lose them to re-add an email account. can anyone help? thanks.

Hello,
I've been thinking about this, and I don't think there is a simple way at all. With other than POP, sent items do indeed get populated to the server. But POP has much less capability than others, and therefore the server just can't accept the placement of items into it's Sent Items folder within the mailbox. It's a POP limitation.
About the only thing I can think of would be for you to take a backup of your device. Then find a PC-based 3rd party backup file extraction utility and extract those specific items. Then, after you remove and re-add the account, you'd have to find a way to re-import the extracted items back to your BB. I don't know anyone who has tried such a thing, so I really am unsure of any details within this process...so you might have to do some further digging, and there may be no success path at all to be had.
Then again...it's also possible that removing the email account from the device won't actually wipe out the items. They may be retained on the device, but simply not be accessible while the email account is dis-associated. Re-associating the account might re-attach the items and make them visible. This is a theory, mind you...not anything that I've tested.
In any event, with POP there are severe limitations to what can be done. If you really have to preserve those sent items, you should first forward them to yourself so that they become part of your inbox and therefore are on the server (albeit as an inbox item rather than a sent item). Just in case.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sent messages only appear in the sent folder after restarting Thunderbird

Hi, my problem is that sent messages do not appear in the sent folder unless I restart Thunderbird. I have the sent 'copies' box de-checked as if not although it syncs I end up with two copies (of sent messages).
I am using Thunderbird 31.2.0 on OSX Yosemite connecting via IMAP to ZOHO mail with STARTTLS on 587 for SMTP.
Hope you can advise, I've tried SSL/TLS on 465 also and it is the same. It's a bit of an inconvenience not being able to view the sent messages.
Many thanks

Interesting to know (the RFC violation) but as you say, perhaps not relevant as such, although if ZOHO wasn't auto-placing a copy in sent then I could check the 'place a copy in' option and it would work ok.
Anyhow, I tried your recommendations and yes, I use both an Android and an iPad to also check my mail but with both disconnected from Wi-Fi the problem still persists. There are a few warnings being reported in the TB error console on the Mac but they just relate to 'mso-table-lspace' for my INBOX.
And for info in Thunderbird on my Ubuntu laptop the problem is exactly the same -
'Place a copy' checked - Messages instantly appear in the sent folder but there are two copies.
'Place a copy' de-checked/Cached connections = 5 - Messages only appear in the sent folder after restarting Thunderbird
'Place a copy' de-checked/Cached connections = 1 - Messages appear in the sent folder on clicking out of the folder and back in.
On Ubuntu there is nothing at all in the error console.
I can work with how things are at this stage as I don't live in the sent folder (rather the inbox), and when you click into it (with the connections cache at 1) the messages do appear, so I suppose that's actually ok.

Sent messages disappeared

I have two computers, a new Intel Imac on 10.7 and an old PowerPc MacBook running the final OS for that. My Apple Mail checks both my IMAP server for work and my .Mac account and both lost substantial chunks of Sent mail a couple of days ago. I don't even know where to begin looking for what might have happened. There are many folder on the IMAP account but only the Sent mail has been effected. Any ideas?

Quit Mail first and using the Finder, go to Home > Library > Mail > this POP account named folder (named by the user name and incoming mail server for the account) > INBOX.mbox & Sent Messages.mbox.
Move the INBOX.mbox and the Sent Messages.mbox to the Desktop.
When re-launching Mail, a new INBOX.mbox and Sent Messages.mbox will be created automatically by Mail within the account named folder when received and sending the next message with this account.
This will allow the Mail.app to function properly again and not risk losing any new received or sent messages with this account while working on the old INBOX.mbox and Sent Messages.mbox files to recover the existing messages.
Control-click on the INBOX.mbox and at the menu window that appears, select Show Package Contents. In addition to the package content file names, please provide the size of each package file.
Repeat for the Sent Messages.mbox and provide the same for this mailbox.

Sent Messages File Mail

I have a very large Sent messages File. I use Apple Mail. On my iMac I have it set to store the Sent Messages File on the Server and Never delete. I do not want or need all 14,000 sent messages downloaded to my MBA, but that's what is happening. What settings should I use in Mail on the MBA to keep that from happening?

I'd recommend creating a Rule. If you don't have experience doing so here is a little information for you to study.
http://www.freeemailtutorials.com/appleMail/rulesWithAppleMail.cwd
Roger

I have IMAP mail. My sent messages do not reliably show up in Sent mail. Why?

I have IMAP email. My sent message do not reliably show up in Sent Messages. Is this a common problem and is there a fix?

Hi rgw1130,
I am sad to hear about the screen on your phone. If you do not have Back Up Assistant set up, then all your contacts will not sync. Have you checked with your Gmail account to see if your contacts are there? Keep us posted.
Thanks, BobbyS_VZW
Follow us on Twitter @VZWSupport

How to maintain Strict Ordering of messages using SOA Suite where AQ is used for persistence.

The requirement is this -
Source DB -> Poller DB Adapter-> BPEL -> AQ -> DEQUEUE -> Target System
Messages are DEQUEUED from an AQ (second part above - AQ -> DEQUEUE -> Target System) . The messages in this AQ are to be sent strictly in order to the Target system. In case there is an error during this processing of messages from the AQ to the Target system. The process should HALT and the message must be rolledback. Put in other words - the interface should stop . There must be no message loss in any circumstances. There should not be any further dequeue of messages or there should be no more instances created due to this. Only when someone has seen this error / error message and acted on this error message/error shall this processing get started. Any idea how do we achieve this using SOA Suite 11g? Hope I have been able to explain well about the problem.
Environment - has two soa managed servers on weblogic (clustered).
Please suggest ways to achieve this scenario. This is very crucial and needs implementation within 2 days of time.

Hi,
You can use Mediator Resequencing if looking for a standard solution. Else introduce Timestamp while pushing messages in AQ and sort them by Timestamp during processing - not a neat solution though.
Regards,
Neeraj Sehgal

To sent messages to Team Suite using PC Suite and ...

Similar Messages

Maybe you are looking for