To set the audio upto the end of the slide

Hi all,
Please let me know how I can extend the audio time upto the
end of the slide time. For example a slide time will be 20 mts . I
want to set the audio time upto that time . Now I am using the file
loop ampient3. It can hear only 17 seconds. I am using captivate 3.
With Regards
Polachan

Hi Polachan
If this is for a single slide you will need to edit the audio
clip and do some copy/paste magick to get the timing as desired.
If the audio is for the entire project, you probably need to
instruct it to loop. You do this using the Preferences dialog.
Click Audio > Background Audio to configure the sound clip as
background audio. You probably want to make it loop.
Cheers... Rick

Similar Messages

  • I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

    I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

    Thanks for that info! Even in my time answering questions on iMovie Discussion Group, I never had a good understanding of when and how Optimize Movie came into play. I always would import as Optimized and Large Size and figured that was good enough. But knowing you got much, much more flexibility doing it the way you describe gives me a much better understanding of the different routes you can take into the Event Library.

  • I can't play videos (youtube for example) unless it is in full screen mode. The audio works in either, but the video only shows in full screen. Any help would be greatly appreciated.

    I can't play videos (you tube for example) except in full screen mode. The audio works in either, but the video doesn't load or run in the normal you tube web site.
    Any help would be greatly appreciated.
    Thanks
    Also, the error console shows all sorts of different errors. Though, alot of error parsing values.

    Do you have any Mail plug-ins? In particular, do you
    have any plug-ins installed on one computer but not
    the other? In the Finder, go to each of the following
    folders (if they exist). What do you see there?
    /Library/InputManagers/
    Not Found
    /Library/Mail/Bundles/
    Not Found
    ~/Library/InputManagers/
    Smart Crash Reports Folder / Smart CrashReports.bundle
    ~/Library/Mail/Bundles/
    MailRecent.mailbundle
    > I have a number of Mail Rules in
    place which place messages
    of certain topics in specific Smart
    Mailboxes
    This doesn’t make sense to me. You cannot tell a rule
    to move messages to a smart mailbox, only to a normal
    mailbox. Each smart mailbox has its own set of
    conditions that messages must satisfy in order for
    them to appear there.
    OK. I misstated this. I have a number of Smart Mailboxes with their specific rules in which to route certain topics to specify mailboxes. I am trying to not have to create each Smart Mailbox on each computer.
    The problem is that when I am on the road I add contacts, bookmarks, keychain items, contacts into my laptop and vice versa when home. I would just like to have those Sync on both computers. Seems like it should be easy, but it hasn't been.
    I really don't think I have anything "non-standard." A few Smart Mailboxes, a couple of signatures, thats pretty much it.
    Note: For those not
    familiarized with the ~/ notation, it refers
    to the user’s home folder. You can easily locate any
    of the folders referred to in this post by copying
    the folder path here, doing Go > Go to Folder
    in the Finder, and pasting the folder path
    there.

  • How do I put the audio from one clip over the video of another clip?

    So I have two videos, and I want to replace the audio of the first with the audio of the second. Sorry, I'm new to 08 and have been trying to suss this out for ages so I'd really appreciate any advice you guys can give.

    This thread seems to be on the same subject and is very helpful.
    http://discussions.apple.com/thread.jspa?threadID=2072620&tstart=50
    The Working with Audio clip also included the solution for extracting the audio from a clip at the very end of the video. Having to know the secret handshake of shift-command and dragging is really not intuitive, but such is progress....

  • I am trying to import video and the audio doesn't upload with the video. Help.

    I am trying to import video and the audio doesn't upload with the video. Help.
    I upgraded to iMovie 11 because the previous version wouldn't read the type of video I was importing (VOB).  The video imports but not the audio, what do I do?

    What are you capturing from?  You may not hear the auido as it's captured but it will be there.  After it's captured can you see the audio waveforms? Do the audio meters move when you play the clip?  If so then go to "View" then "Audio Playback"  and set it to 'Built-in Output" if you're monitoring audio through the computer.

  • When watching a program or film, the video will go black, but the audio will keep playimg. The only way to get picture back is to turn the tv off then on.

    When watching a program or film, the video will suddenly fo black, but the audio will keep playing. The only way to get picture back is to turn the tv off then on. Whats going on?

    Welcome to the Apple Community.
    Check that the HDMI cable is correctly seated at both ends.
    Try disconnecting the cable and connecting it again.
    Try another HDMI cable.
    Make sure your TV supports 720p (Apple TV 2)
    Try the Apple TV with another TV

  • How can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)

    how can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)

    It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop.  And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure  what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

  • How do I use just the audio from a clip without the video?

    Can't remember how to use just the audio from a clip, without the video.  FCP X can't select like FCP&

    Edit just the audio into the timline.
    The disclosure triangle next to the edit buttons.

  • I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    Thanks for the reply.  I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long.  After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix.  I strongly suggest not to buy this product.

  • Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

    Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
    Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
    The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
    Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
    I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
    Any way to fix it?

    only $99, i thought it was closer to $175.

  • I made a video of our summer vacation on imovie. It's over an hour long. When I try to share it, the audio syncs incorrectly at about the 15 minute mark and is off for the rest of the movie. Is there a way to fix this? I think I have imovie 09.

    I made a video of our summer vacation on imovie. It's over an hour long. When I try to share it, the audio syncs incorrectly at about the 15 minute mark and is off for the rest of the movie. Is there a way to fix this? I think I have imovie 09 with all the availbable updates.

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button. What's wrong?

    I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button and won't let me select an input for the audio track on the inspector panel. What are some possible solutions.

    Certain M-Audio USB devices (along with some other USB2 class compliant devices that don't use drivers) no longer work with Logic Pro X 10.0.5
    At this time it is unknown as to why this has happened. Nor is it known if Apple will need to fix it or if it is up to the Developers of said USB2 devices  to remedy the problem.
    In the mean time, assuming you made/could make backups prior to updating to 10.0.5.... the solution is to roll back to LPX 10.0.4...

  • How do I uninstall once the trial period has ended?  The instructions say to de-activate the software, but the only option I am given is to enter a serial number.  Thank you

    How do I uninstall once the trial period has ended?  The instructions say to de-activate the software, but the only option I am given is to enter a serial number (I can't get to a place where I can go to help and de-activate)..  Thank you

    Mobriennc which operating system are you using?  Which Adobe software title are you currently evaluating?

  • As i am watching a movie the audio will cut out in the middle of the movie.

    As i am watching a movie the audio will cut out in the middle of the movie. Also I am watching the movie in full screen mode.  IfI have a windows 8 and this article does not work http://support.apple.com/kb/ts1718. I have uninstall and reinstall with a current version of  quicktime.

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • How can I keep the audio on HDMI 100% of the time?

    I'd like my 2010 Mac mini to stay on HDMI Audio output, regardless if my Denon AV Receiver is on or not.
    I don't think I should have to always have to go in to Settings-> Audio and manually change the audio from Internal to HDMI output.
    This doesn't happen consistently, but it happens enough to be annoying.
    The wife approval factor on this HTPC has not been great so far. She doesn't like it when I hold her up from her TV shows while I am constantly putzing with this thing.
    Surely there should be some way to get it to always 'look' for a HDMI connection, and when found, switch to HDMI audio. I don't see how this could be that difficult when there is video coming out over HDMI just fine.
    Any solutions out there besides buying a $100 Geffen HDMI Detective?
    This is Apple, it should just *work*.

    Is the Denon actually "off" or is it in standby? If in standby,
    does it has a setting for HDMI pass through when in standby
    and is it set? And if it is in passthrough, is the TV audio enabled?
    I know my Yamaha, I needed to set the pass through mode when the unit
    is in standby. Also, if I put it in the "off state", complete powerdown, it
    will not pass any signals as the HDMI ports are electronically switched.
    Message was edited by: woodmeister50

Maybe you are looking for