To show missing Evaluation Classes under SPRO screen

Hi,
I'm trying to view wagetype charecteristics/values via SPRO --> ..... --> Wage Types -> Processing Classes, Evaluation Classes, Cumulations -> Check user wage types
I noticed that few Evaluation Classes were not shown. I can see these Evaluation Classes via SM30, table
V_512W_O or via SE38, report RPDLGA40.
How can I display these missing Evaluation Classes via my SPRO screen? Thanks.
Regards

Hello
See if this is of some use - program RPDLGA20 run it as a tree structure, then you can expand the evaluation class node.
Cheers
Rona

Similar Messages

My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

My MacBook Pro shows the logo in a white screen when I ask for a Software Update under the apple. Actually it stays blank on Featured, Top Charts, Categories and Purchases as well. What up? Thanks.

I am having exactly the same problem right now. After some research, it looked like my HD was toast. I replaced it today, that part was easy, but now I cannot seem to use my original Install Disk to format the new HD. I get a grey restart screen, or if I get to the Language Selection screen, my cursor is frozen in left corner and I can't use it.
Very frustrating, hope someone else has some ideas!
PS My MacBook was about same age, and "expired" in exactly the same way as yours.

Evaluation Class, Cumulations Class, & processing class: Indian Payroll

Dear All.,
Indian Payroll
What are the Evaluation Class, Cumulations Class, & processing class we need to maintain for ESI Eligibility for a Wage Type ?
Scenario : Except LTA all other Salary Components(as part of Infotype 8) consider for ESI Eligibiilty. So I wanted to check all other WTs.
Pls guide me how do i can deal with this.

Use t-code PC00_M99_DLGA20 to generate the "Use of WT in Payroll" report, for Country Grouping 40, without specifying any WT, and using the WT Validity Dates from Today to Today.
When the report is on screen, double click on "Meaning of processing classes and their values".
Click on any character in the report's description of Processing Class 01, and use the Binoculars to search for ESI. The system should show 4 "hits", all on PrCl 72.
I don't know anything of Indian Payroll, but it would seem that PrCl 72 is relevant for ESI. Use this report to see what WTs cumulate or don't cumulate into ESI/PTX basis (drill down in each line of PrCl 72).

Elitepad 900 tablet shows missing serial and product info when booting

Hi,
i recently updated my tablet from windows 8 to windows 8.1 and then updated bios. after this upgrade on boot screen it shows missing aerial number and product info. please note that i have not changed the board or any other hardware. please help me to resolve this.
regards
Raees

Hello Malik-Raees,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Best regards,
I worked on behalf of HP.

MacBook shows up multiple times under 'Shared' in finder

My MacBook keeps showing up multiple times under 'Shared' in the Finder sidebar. All sharing services are turned of in System Preferences. The number in the computer name is automatically added. When I change the computer name to another name, all existing 'ghost computers' stay there in the sidebar. How do I get rid of these?

Known bug. Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer
Some people have managed to stop this behavior by going to System Preferences/Sharing and stopping all sharing except screen sharing.

How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

HA! I figured the find my iphone out!!!!! You can have more than one icloud account in "Mail, Contacts and Calendars". So my husband's & kids' phone icloud account under "settings, icloud "is their individual @me.com account. Set it to everything you want EXCEPT Find My Iphone. Then under "settings, mail/contacts/calendars" you set up both accounts (your @me.com which may already be there), then add another with the main appleID and enable ONLY Find My Iphone. Now when any of us log into Find My Iphone from any device with our main apple ID for the app store, all the devices show up!!!! YIPPEE. I made my own day!
I think the message I got previously was because I hadn't disabled the find my iphone on the @me.com account first.

Isopropyl Alcohol got under the screen, should I replace it?

I was cleaning my commuter yesterday with Isopropyl Alcohol as one of my mom's co-wokers said it was the way to clean he screen. After this happened I read that constant contact causes an LCD screen to become brittle to the extent it cracks. When should I replace my computer? When it shows sign of cracking or now?

Ok, you used Isopropyl Alcohol on the screen but it hasn't cracked.
But you got some under the screen, meaning you used too much.
Just wait for it to dry, it will eventually.
Alcohol breaks up the human oils that creates smudges on the screen, your supposed to tab a little on a cloth and then wipe the oil away, then use a new clean spot and repeat, removing the oil onto the cloth as the alcohol evaporates fast.
No liquid is to get insdie the machine, especially the built in keyboard.

E72 - Dust/dirt under the screen ?

Hello!
I have the E72-1 and I'm very happy with the phone. Using 022.007 today and I would recommend this phone to a friend.
I have had a few known problems:
pictures missing form the gallery
the D-pad fails intermittently
No indication when the charge is done
battery cover is a joke. Bad fit and to thin
but overall the phone has worked very well.
But now I have another problem that is more annoying.
It looks like there is dirt/dust *under* the screen - I have checked the screen and there
are no marks on the screen surface. I have used the case that comes with the phone
from day one but that has not helped.
How many here has seen this ? or am I the only one...
I can see the dust/dirt clearly when the screen saver is running, it is very annoying.
Cheers,
N. Muntz
HaHa
Solved!
Go to Solution.

Hello,
As I previously had a 5310 "XpressMusic", very prone to dust under the screen, I am constantly watching this point on my 3 months old E72-1 (made in Finland, bought in Paris - France).
I always wear the E72 in jeans/shirt pockets without extra protection, so it is the worst possible situation.
I affirm that after 3 months of heavy usage there is ANY dust under the screen, nor under the camera window.
Under the exact same condition, the camera on the 5310 was almost unusable after 1 month, and its screen was innerly covered by dust after 2 months (but still visible and usable after 2 years, so don't worry).
But if you see too much dust under the screen, your unit could be defective as others (mine) don't have this default.

X Quick Time Digitizer shows [Missing] DV Video

I'm using FCP 5.1.4 and camera Sony HDR FX1. Trying to capture DV footage but can't somehow.
I can operate camera remotly but can't capture video (it doesn't apear on screen).
When i try to press 'capture' in log and capture option, this comunicate apears:
"Attempt to capture a video without video device selected.
Please select a video device in your capture presets and try again".
So i went to>Final Cut Pro>Audio/Video Settings...>Capture Presets>DV Pal 48 kHZ and Quick Time Video Settings shows [Missing] DV Video and the only option it gives me is to select NONE.
What should i do??
Thank you.

Hi Brian,
Thanx for reply.
I've done exactly what you said. My system can see FX1.
My firewire cable is fine too (got two anyway).
I can capture fine in iMovie (so mac and camera comunicates fine).
In FCP i've got easy setup set to DV Pal. It allows me to remote control camera, I can play it, but image doesn't came thrue (only sound). I can't see the image on my mac and if i try to capture, the same comunicate apears, as before.
I went to Audio/Video Settings>Capture Presets and in Summary it says:
WARNING: Video Device DV Video is missing
Canon DV using Pal
25 Frames per second
DV-PAL at best quality
etc.
I can capture HDV footage, but only if i use HDV Apple intermediate codec.
If i try to set it to HDV 1080i50 (as i use to in older FCP) it doesn't work.
I'd like to concentrate on DV format just now anyway.
Any ideas what i'm doing wrong?
Thanx

TS1567 i just got a new iphone 5C and it wont show up on itunes under devices. my old iphone and my ipod nano both show up. help!

i just got a new iphone 5C and it wont show up on itunes under devices. my old iphone and my ipod nano both show up. help! i tried all of the apple 'solutions' and none worked. the only thing i did not do was delete and reinstall itunes because i did not want to lose anything

As you connect your ipod to iTunes, an option in the upper right of the screen will appear. When you click this, it will show the different menu for your ipod.

Dead bug under iPad screen

1st generation iPad less than 2 years old. A small bug was crawling around UNDER the screen and died in the middle. Brought it to an Apple Store and they "offered" to let me pay $249 for a replacement. Shouldn't the screen be sealed??? Why should I pay $249 when the device was $699 new less than two years ago and shows no visible damage which would allow for a bug to crawl in?

Well, if nothing else, you can genuinely and truthfully state your iPad has a bug.
The top of the screen is in fact sealed, but the bottom of it (under the screen) is not. Odds are the little critter found his way into your iPad via the 30 pin plug port (or less likely the headphone receptacle). I'm not without sympathy, but not sure how you could hold Apple responsible for that.
Asreviously suggested, you might try moving your issue up the food chain at the Apple store, but beyond that not much more I could recommend. A third party repair service may be a less expensive option it you do end up needing to have it cracked open.

Creating new Evaluation class

Hello
I m going to create a new specification for Evaluation class 2.
By just using table VC_T52DE
SO WHATS NEXT, is anythg i need to assgn and need to update anythg.
NSN

Hello
The reason behind is. We do have WT's which i had t oassgn E'CLASS with specification as
Earning and Allow
and other one is
Negative under Earnings
Which are not part of specifiction of E'class 02
NSN

Setting to show text (sms) notification on lock screen but not message content

Just about every phone I have will give a notification of a new text while locked. I know the iphone goes one step further shows a preview and who it's from.
For privacy reasons (work and personal) I might not want people to see who is texting me or what it says. I would like a simple message saying "2 new messages", or "1 missed call" on the lock screen, so I do not have to unlock it every time to check.
How do I do this?

Settings > Notifications.
Select Messages.
Set it to Banners or None.
Show preview Off.
Badge App icon On. (This is the little red number on the icon showing how many new messages you have).

Missing USB class driver for Lexmark X7170

I just upgraded to Leopard and everything went fine but the USB connected Lexmark X7170 errors when printing with this message:
/usr/libexec/cups/backend/usb failed
Missing USB class driver
I did reinstall the Lexmark printer app but no luck. The app does run but missing USB driver still. Posted email to Lexmark but no reply.

Have same problem with Lexmark X5490 - in fact I used it OK under Tiger but wasn't ever able to use since upgrading to Leopard last year.

Missing Backing class

Hi,
I'm a newbie to portlet. I need to adding this WelcomeBacking.class under /controls to a welcome.portlet
using workshop.
But when I specify control.WelcomeBacking.class under the Backing Class textbox and start Debug mode, it always complaint about the missing file.
Regards,
Paul Tan

You have to create backing file, something like WelcomePortletBacking.java which extends AbstractJSPBacking and save it under WEB-INF\src folder for the portlet to access it.
BTW what .class are you referring to?
Seenu.

To show missing Evaluation Classes under SPRO screen

Similar Messages

Maybe you are looking for