To show the 2nd part highlighted there only once on each page

Hi,
Could you pls see this for the problem?
http://www.4shared.com/document/VExaTDlv/t31.html
Regards,
edward

Hi,
The 1st highlighted part below should be Group 1 in the report.
The 3rd highlighted part should be Group 2.
Without using a subreport for showing the 3rd part below, is there still a way to show the 2nd part highlighted below only once in each page?
what is the 2nd part the column headings?
what do you mean highlighted?

Similar Messages

How to display column headings only once in each page with repeated blocks

Hi,
I have a report with 1 block on one column. The block has a table in it and will repeat in one page.
I need to display the column headers only in the beginning of each page. Can someone share your experience in implementing this ?
Thanks for your help.

>
andyhchsu wrote:
> Hi,
> I mean in each block within section, I only need to display the table header once in each page.
> However if I check table header, it will display repeatedly. Any way to get around this ? Thx.
The trick I use to do that is turn off all the headers on the block (table and break) and put the header information in its own block above the section and set the new header block to repeat on each page. You just have to remember to resize the columns in the header block if you make changes to the column sizes in your data block.

The window shrinks down and when you expand it the writing isn't there it only shows the small part that does open. Most of the games can't be played this way!

When you click to play the game, the window shrinks down and when you expand it the writing isn't there it only shows the small part that does open. Most of the games can't be played this way, you can't read the chat or access most of the buttons!!! It is just the newest version of Firefox because it works fine on my other computer that hasn't been updated and it also works fine in IE.

See:
*http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
*http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings
* http://kb.mozillazine.org/browser.link.open_newwindow
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction

How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it??? At the moment, if I view them on my laptop, landscape photos fill the screen, but portrait photos only show the middle part.

How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it (in Slideshow)??? At the moment, if I view them on my Mac Laptop, landscape photos fill the screen, but portrait photos only show the middle part, so I loose the top and bottom of the picture. Have tried cropping, but that means I lose top and bottom part of the picture, so that is not the answer!!

Homestly haven't a clue what's going on there.
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

To show the 2 parts on every page

Hi,
Within the following jpg file, the 1st highlighted field is a grouped field, and I want to show the 2nd highlighted part as the header of the fields of the detail group. How can I show both the 1st highlighted part and the 2nd one on each page?
http://www.4shared.com/photo/FfOIVmef/t9_online.html
Regards,
edward

Many thanks. I think the way should work and will confirm this.
By the way, I want to see the way to show the words vertically like this
http://www.4shared.com/photo/9VWbcw7z/T11.html

Dreamweaver design view doesn't show the bottom part of a long div

Hi!
I'm doing a very graphics oriented site, which basically requires me to use a large jpg as a background image and placing text areas against this background using absolute positioning.
My problem is that Dreamweaver doesn't show me the bottom part of my content div's background, but renders it as black instead. This obviously makes placing the text areas correctly difficult, since I can't see them against the background.
If I turn on Live view, then Dreamweaver shows the bottom part correctly. But in live view I can't use rulers and guides (or can I?).
Is there any setting that I can change so that Dreamweaver is showing me the whole div bg in all situations? One possible cause of this problem might be also that I'm using overflow:scroll on my content. Could that be why Dreamweaver hides the bottom part and can I change that behaviour?
Any ideas are welcome!

If we can see the page in question we could probably do this a lot easier. But all you need to do in your CSS for the background is:
background: url(pathto/image.jpg) fixed no-repeat;
If you are trying to absolutely position something in the middle you will be unable to do this without the assistance of javascript to determine the useable pixels on the end-users computer. Horiztonally is not the issue, but rather vertically because you can achieve horizontal centering by defining a width and setting the margin: 0 auto; in your CSS.
As far as working with overflows, if there is too much content in them that you believe the overflow will be necessary (assuming min/max-widths are set) you could consider including the content from another document or store it in a database and query the information out. Then it would make it easier for the client to update the content on their own in the future.

Im trying to transfer my songs to my itunes. ive tried wit all kinds of softwares and also manually. when i go to my computer and on ipod and select view show hidden files it dont show the ipod control folder. it only shows the dcim

my ipod been actin up lately. sometimes im just playing a song and all of a sudden it freezes or turns off. it dont do it often but it do. so im trying to transfer all my songs to my itunes or my computer. i have tried every software out there and it tells me that im missing a plugin. i have restored my ipod and had to start brand new. i have updated my itunes to make sure is not a update issue. i have the latest updates but is stil not doing it. so when i try to transfer the songs manually i go to my computer; my ipod; view folder options and select show hidden files. it dont even show the ipod control folder. it only shows dcim

You need a third-party program to get non-iTunes purchased music off the iPod. Which have you tried? Th good ones cost like TouchCopy and PhoneView. Here are some others:
Copy music from Ipod to new computer...: Apple Support Communities

Hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

hi, i installed ios 5 for my iphone 4 and the camera function on lock screen was on the first few days , now it doesn't show the lock screen . is there any change i can do . Pls help me to solve the issue.

nishaadp wrote:
... it stucks with the apple logo , nothing works. Is anything i can do?
See Here for
Frozen or unresponsive iPhone

TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

When i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

when i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?

I have reset my iphone and made sure all updates have been done on my macbook pro and iphone. It was after updating my macpro that I plugged in my phone and went to itunes to backup phone and can't see the device anywhere! I have also done all the troubleshooting that apple.com recommended too...all except re-installing itunes!

Always show the attachment part in a uwl task?

Hi community,
I think the topic says all. I always want to show the attachment part of a task.
Any way to customize that? Maybe dynamically based on some conditions?
Many thanks,
Tobias

Hmmm, I think I cannot help here. Maybe it is about the version?
As far as I remember for me the attachments have been always visible directly and I 've been able to directly click them. I hope we are speaking about the same thing: In UWL under the work item list in the work item description part, the attachments (for example the business objects) are visible.
Regards,
Karri

TS1424 I keep getting an "err: 100000" while trying to download the 2nd part of an audiobook (all other 6 parts downloaded normally). What do I do?

I keep getting an "err: 100000" while trying to download the 2nd part of an audiobook (all other 6 parts downloaded normally). What do I do?

I'd report the issue to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

HT1349 my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?

my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?

If you are not showing reception bars, then I don't know how the data is working? Have you tried doing a reset? Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check to see if it works. If that doesn't help, then try removing the SIM card, then reinserting it. If that doesn't help, then contact your carrier for assistance in calling.

Is there is any way to show the nomber of shares of any post in facebook page using android view not desktop view

is there is any way to show the nomber of shares of any post in facebook page using android view not desktop view

Sorry, its not related to Mozilla Profucts.

To show the 2nd part highlighted there only once on each page

Similar Messages

Maybe you are looking for