To sign together with signature image

I want to sign conventionally by including my signature image. However, when I choose to configure signature appearance, Adobe Reader XI cannot import graphics in jpg, only choice is pdf and signature image came out truncated! So, is it confirm that, if we want to include signature image together with the digital ID's text, we can only use Adobe Acrobat to do it? Appreciate if anyone can help to advise on this. Thanks.

You need Acrobat to import graphics other than PDF when you create a signature appearance.

Similar Messages

Sign Document with Signature validated Automatically

Hi everyone
I want to sign a PDF document with a certificate “.pfx”, I have adobe pro extended and visual studio 2008 for do that and I’m using visual c sharp to develop my application until here everything it’s ok the problem is after to sign the document when I open the document adobe can’t verify the signature and timestamp, I need to validate the signature manually and I don’t need that, I need the validate the signature and timestamp automatically because I need to distributed a lot pdf sign documents to my customers and I can’t provide exclusive solutions for each one of them for validate the segnatures, I hope you can help me with this issue.
My Best Regards

What do you mean by "can't verify"? That the validity is unknown? Does it say why?
Most likely this is due to an unknown root certificate for the .pfx. What is the root/CA for the .pfx?

Using the Image Processor together with an action - original files won't get closed

Hi,
I just made an action to position my website's name at the bottom left of my photos and to use it then together with the Image Processor.
When I tried it out, I realized, that my whole pc slowed extremely down. Then I saw that the original files didn't get closed during the image processing process ...
Then I made some tests and the result was, that the Image Processor doesn't close the original files if the action in use has more than 26 steps.
Could someone please check out if its the same with his/her Photoshop? I use Photoshop CS6 on Windows 7.
Thanks a lot!

Hi,
The problem is caused by your project not 'knowing' about the
picture. Robohelp will automatically include all images that are
embedded in HTML docs, but if they are only displayed via a link,
they do not form part of the files list that is created in the
resulting .HHP file.
A remedy: to resolve this in the past, I've created a 'dummy
page' that is not indexed or included in the TOC, and contains
embeds of all of these pictures that aren't directly set in the
HTML. Make sure it is included with the correct conditional build
tags and recompile, you should find that the linked image now shows
up in the CHM okay.

Signature with .pdf image only?

I have created a fillable form using Adobe Pro XI. The form can be filled out using Reader and
users can put in their digital ID signatures into the blocks I created for
that. However, going through the process
of signing the form, the only option for a scanned in image of a hand written
signature is a .pdf file. Guess I
thought any type file such as jpegs, bitmaps, etc. could be used. The problem with the .pdf file is our users
cannot crop this type of image down to just the signature using Reader. So, when the image is placed into the
signature block, it is the whole 8.5x11 page.
Can’t really see the signature. I
tested some other fillable forms for Reader found online from other sources and
it I is the same thing. Can only use
.pdf file as the signature image. Is there another way to do this? Am I missing something?

Reader only allows signatures from pdf files, Acrobat from other files. When scanning their signature they should be able to scan to a custom size page or use a graphics program to crop the scanned image even if it is a pdf. The Mac Preview program is capable of cropping pdfs. The only graphics program I use on Windows is Photoshop, which can do the job, but it is certainly what I would call overkill for the job. Perhaps ImageJ or Gimp can do the job of cropping.

Sign Once (Signature Pad) & Copy Signature Image Many?

Does anyone know how to sign a document once with a signature pad (or with a signature image applied to a digital signature,we suppose) and then attempted to copy the signature image into other image objects in the form? We’re assembling large sets of forms with multiple signature areas, and one common end page where the signature is captured by the signature pad. The requirement is to fill-out all associated signatures so that the customer only has to sign once (yes, this has been approved by legal).
What we’ve tried to do is to bind and image field in the form to the same XML element where the signature image data is bound. The signature field, of course, is not bound to anything as there is no binding tab. The problem is where do we find it (if it’s even exposed)? We’ve written JS to dump the entire XFA data out of the form, but the signature info is just not there.
Any other ideas we may pursue? If this helps, we're using a Topaz SignatureGem 1x5 signature pad (see attached link). We’ll need to worry about invalidating the single digital signature if we can figure this out, but just trying to get through the first hurdle. Not sure if it's possible, as well, to copy one signature to another in its entirety.
Thanks for anyone’s help in advance!

Additionally, it looks like someone opened a thread on doing this a while back, but it trailed-off (no answer):
http://forums.adobe.com/message/4184259#4184259

WSE3.0 encrpyt and sign soap message together with disabled WSAdressing

Good Morning,
my task is to develop client´s applications written in .net4 who calls webservice (written by other- foreign firm in Java). My application, which calls webservice of other firm are: (plugin of MS CRM 2013, windowservice, windowformsapp for testing this communication)..
I had to implement encrypt and sign comunication with this webservice by client and servers certifikate.
I implemented this functions from:
http://msdn.microsoft.com/en-us/library/aa528788.aspx
and
http://msdn.microsoft.com/en-us/library/aa529565.aspx
by WSE 3.0.
Now I have to implement to disable WSAdresing in soap messege. Is it possible to use encrypt and sign from WSE together with disabled WSadressing?
(Other firm needs so as nodes of WSA will not be in soap message). With nodes WSAdresing in soap message, my communication with other webservice do not works. They (other firm) require no WSA nodes in soap message
If it is posible, how to implement this functionality?

Hi Matesak,
I'm afraid this is not the most suitable forum for your question. Please open a new thread in this forum, you'll get more valuable responses.
ASP.NET Forums >
Advanced ASP.NET >
WCF, ASMX and other Web Services
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I'm trying to convert a PDF to Word, but it won't copy signatures over, just get gobblygook... any way I can convert with an image of the signatures?

I'm trying to convert a PDF to Word, but it won't copy signatures over, just get gobblygook... any way I can convert with an image of the signatures? I tried Word, RTF etc but they all come out the same. Help!

Hi newromancer65,
Would you send your document as an email attachment?
I will check it from my end.Please add the link to this forum post for reference.
I have sent you my contact details on your email id.
Regards,
Florence

When I'm travelling I import photos onto my laptop's external hard drive and work on the images using virtual copies to develop them. When I get home, I want to import all the photos together with the developed virtual copies fromt the laptop's external H

When I'm travelling I import photos onto my laptop's external hard drive and work on the images using virtual copies to develop them. When I get home, I want to import all the photos together with the developed virtual copies fromt the laptop's external HD into LR5 on my PC desktop. But if I use the import button in LR I only get the original photo, not the developed copies. What am I doing wrong?

Since your current editing workflow is based around Virtual Copies there are no actual files containing the edit data. Therefore, you'll need to use the 'Import from another catalog' option ( see File menu).

Store signature image in Active Directory and deploy it to each users desktop

What I am trying to achieve is to have each user a hand written signature scanned in and stored in the .jpgPhoto attribute in Active Directory and then have some sort of script, like our login script, pull that information and copy the file to the users
desktop. We are wanting to be able to allow users to apply the signature image on a signature line in Office 2010 or InfoPath forms instead of typing their name. I know there has to be a way to do this but I have not found it yet and I am
not very good at scripting. Is there anyone here that has accomplished such a task and if so, how did you go about doing it?
David Hood

We already have Outlook email signatures created from AD information deployed to all users. Someone else on my team deployed that already and it works great. But that is just basic user info pulled from fields that were manually entered in
the user account. What I want to do is have a user scribble their signature on a piece of paper or a tablet, capture an image of that to crop and resize to store in the AD user account or somewhere secure that can be queried to be pushed to that users
desktop. I work at a state government agency and I have heard of another agency doing this but I have no idea how they did it. The only thing I could think of is to have a script ran during login to query the AD attribute the image is stored in,
pull it and then copy it to the users machine so when they sign a word document or .PDF with a digital signature they also have the option to place that image in the signature line.
David Hood

Ability to sign emails with certificates

Hi all,
I was just wondering if anyone had been able to setup their email on the iphone (I am using a mobile me account which syncs - I don't know the terminology) with digital signatures.
I have setup my macbook that, when I compose an email, I can sign it with a free certificate I got from Comodo.
I was wondering if there was a way of setting up the iphone so that I can also sign the messages I compose when I am about?
I had a look at the iphone configuration utility (briefly) but got scared that I might change some other setting and break my phone (everything else is working so nicely).
Is there any guides as to how set this up (am happy to look at the iphone utility if I could get all the current settings I have loaded onto it and then just change the required changes). I don't know if this is even allowed in the device...
Any information would be helpful
Cheers
AusQBall

Hi Sean,
Thanks for replying but I am not sure that the application does quite what I am after...
I am not trying to add an image with my signature on it but rather add a cryptographic signature which allows the recipient to know that it came from me. My knowledge on this topic is a little sketchy but I think that, for it to work, a hash of the entire message would need to be calculated and then encrypted with a private key found in my signature certificate (which only I have). The recipient can then check that the message has not been altered using the public key (provided in the email and signed by a certificate authority) to confirm that the hashes match.
Please reply if I have misunderstood something with the application.
Also thank you for looking into this for me. Any help is appreciated.
Cheers
AusQBall

Help needed with perl Image::Magick module

I don't know if this is the right place to post this (it might belong in the Newbie corner instead), but I'll give it a try.
I need an Image::Magick Perl module (and a load of other modules, which I have found) for a program I desperately need. Now, the only thing I know about Perl is that v. 6 is supposed to be coming out soon - apart from that, I'm blank. The installation is giving me some problems.
The installation guide is somewhat ambiguous. It says:
Next, edit Makefile.PL and change LIBS and INC to include the appropriate path information to the required libMagick library. You will also need paths to JPEG, PNG, TIFF, etc. delegates if they were included with your installed version of ImageMagick.
In the Makefile.PL which comes with the package, these two are defined:
'INC' => '-I../ -I.. -I/usr/include/freetype2 -I/usr/X11R6/include -I/usr/X11R6/include/X11 -I/usr/include/libxml2',
'LIBS' => ['-L/usr/lib -lMagick -L/usr/X11R6/lib64 -L/usr/lib -ltiff -ljpeg -lpng -ldpstk -ldps -lXext -lXt -lSM -lICE -lX11 -lbz2 -lxml2 -lpthread -lm -lpthread'],
I haven't changed anything in them, because I haven't got the slightest idea what to change and to what. When I run the installation procedure ('perl Makefile.PL', 'make', and 'make test'), I get an error message during the test (but not before that). Here's the entire output from 'make test':
/bin/sh ../magick.sh PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/bzlib/*.t t/jng/*.t t/jpeg/*.t t/mpeg/*.t t/png/*.t t/ps/*.t t/tiff/*.t t/x/*.t t/xfig/*.t
/bin/sh: ../magick.sh: No such file or directory
make: *** [test_dynamic] Error 127
There is mention somewhere that one might compile the module together with ImageMagick or with Perl, but I don't think I'm ready for that...
Is there anyone skilled in Perl who can tell me what it is that I'm doing wrong, alternatively make a package file...?

I've found two other packages that I needed in AUR, but when I run the make test for the program that I need (fontlinge), it still complains that it can't find the Image::Magick module. I already have the imagemagick package installed, though, that's why I thought I'd have to install and compile the perl module separately.
Here's the output from the 'make test' for fontlinge:
make -C modules
make[1]: Entering directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules'
make[2]: Entering directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules/fontlinge'
make[2]: Leaving directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules/fontlinge'
make[1]: Leaving directory `/home/eyolf/temp/src/fontlinge-2.0.1/modules'
./misc/check_for_modules.pl --skip-fontlinge-module
Ok. Cwd 'abs_path'
Ok. DBI
Ok. User::pwent
Missing Image::Magick
Ok. Getopt::Long
Ok. DBD::mysql
Ok. File::Find
Ok. File::Path
Ok. ExtUtils::MakeMaker
Ok. 5.006
Ok. bytes
Ok. -utf8
It seems some required modules are missing.
How to get missing modules differs from _which_ module you are missing.
You can get modules like DBI from your distributions CD
or search the web for a RPM/DEB/...-file. www.cpan.org is always a good adress.
It may be a good idea to configure your perl-CPAN-Module as ROOT(!!!) by typing
perl -MCPAN -eshell
It is VERY important that you do not just 'su' to root but 'su -' on SuSE linux.
Once you have configured perl, you can install CPAN-modules by
perl -MCPAN -e 'install MODULENAME'
Other modules like Image::Magick require you to have the programs installed
they belong to.
If you are missing a 'fontlinge'-module, you have not installed this
program correctly. :-)
If the missing module begins with a '-' sign this module might miss,
because it is not possible to DEACTIVATE it, i.e. unwanted utf8 encoding.
make: *** [test] Error 255
If this makes sense to anyone, I'd be very happy. (For the record: Fontlinge is - or at least seems to be - the only decent font manager I've found for Linux. This seems to be a gaping, wide open black hole in the Linux world... There's gfontview, opcion, fontpage, and a couple of other minor apps that I've found, but none of them are functional for anything but the most basic operations, and on the whole, there doesn't seem to be much between the KDE font manager - which really makes one wonder how far the KDE people want to go in their emulation of windows... - and the font editor FontForge, which is great as a font editor, but overkill as a viewer, and hardly a manager.)

How notification system work together with Acrobat X Pro?

Hi everyone,
I use Adobe Acrobat 10 Pro to implement Distributed PDF Form in my organization. I have some problem about this.
When client fill information in application form on our distribution server,Do you have solution that Acrobat 10 Pro can send a notification to specific authorized
prerson for his/her Digital Signature?
example : Mr.A filled some information about Purchase Order. System require his supervisor's digital signature so, Acrobat send notification to his supervisor automatically.
I have some idea about Active Directory work together with Acrobat but, I don't know how to use both of it together.
Any advice will help me so much.
Best Regards,
Charles
PS. sorry about my poor english

Thank you so much about your suggestion.
Do you know how i can integrate Acrobat X Pro with Active Directory?
I look forwarding to hear from you.Thank you.
Chompunoot
Date: Thu, 2 Jun 2011 19:29:41 -0600
From: [email protected]
To: [email protected]
Subject: How notification system work together with Acrobat X Pro?
Hi Charles,
You want to modify the signature field properties and set a script to execute when the field is signed.
Here's how to get started in Acrobat X:
Open the file that will eventually be uploaded to the server
Click Tools on the top right to open the Tools panel
Expand Forms (click on Forms so you can see the buttons underneath)
Click the Edit button
Right mouse click on the first signature field and then click Properties from the pop-up menu
Select the Signed tab on the Digital Signature Properties dialog
Select the This script executes when the field is signed radio button
Click the Edit button
Add the following in the JavaScript Editor dialog:
          var cMyMsg = "Please log on the server and sign the document";
          app.mailMsg ({
              bUI: true,
              cTo: "mailto:[email protected]",
              cSubject: "A document requires your attention",
              cMsg: cMyMsg
Click the OK button on the JavaScript Editor dialog
Click the Close button on the Digital Signature Properties dialog
Click the Close Form Editing button in the Forms panel under Tools
Save the PDF file
It's going to look something like this:
http://forums.adobe.com/servlet/JiveServlet/showImage/70913/SignScript.jpg
Give that a try and from and see what you think. You can set the strings as necessary and repeat for each signature field (except for the last one )
Steve
>

Unable to Display Signature Image in Siebel BI Report

Hi,
I have been trying to display a signature in a report but when I run the report the place where the signature should be is empty. I have searched through the log file but there is no error indicating anything is wrong. Siebel has an out of the box report which I have been using as a reference, their .rtf has the following in it:
*<?for-each:psfn:transform(.)?>*
+(an image is within this for each)+
*<?end for-each?>*
*<?namespace:psfn1=http://www.oracle.com/XSL/Transform/java/com.siebel.xmlpublisher.reports.XSLFunctions?>*
*<?namespace:psfn=http://www.oracle.com/XSL/Transform/java/com.siebel.v_sia.shared.custom.Ls_recipt?>*
The field in the xml that contains the string of characters for the image is named, "ssSignature" what I do not understand is that I see no reference to this field in the rtf. So I do not know how the signature image could be displayed if it is not in the .rtf. Since this report is shipped out of the box with Siebel I would expect it is correct and therefore should work. Can anyone provide any suggestions on what may be wrong or how to display a signature image???
Thanks,
Fred

Hey Fred,
Have you made any progress on this issue? We have the exact same issue and have an SR opened on Metalink. I must admit that the support has been lacking of late.
As I understand it the Signtaure string is encoded and at some point the OOTB rtf should be converting it to an image to be viewed in the report. I beleive that the function that should be doing this resides in either the InkToolsLib.jar or iSignBmp.jar so these must be part of your classpath environment variable.
Support says that the OOTB report works for them, but I have been trying a thousand different things to get this to work and our issue is still not resolved.
I'll keep you posted if by way of miracle a solution is found.
Joe

How can I sign up with Enterprise program, while I have an active membership of the iOS developer program?

How can I sign up with Enterprise program, while I have an active membership of the iOS developer program?
I have bought a memership for the iOS Developer program.
I have created an in-house app.
Now I want to publish it to all employees without registering the devices.
So..
I go to their website and try to sign up for the enterprise program, image shown below:
http://s29.postimg.org/q06ylh5o6/Clipboard01.jpg
Within the image above, I click continue...
http://s14.postimg.org/46lqcpy74/Clipboard02.jpg
Then I am taken to the image above, there I need to select a program, but I already have a program, the iOS developer program! And the checkbutton of that program, is disabled. If I try to click continue at this page, without sleecting a program, a javascript-box shows "You have to select a program before continuging"...
Do I need to unsubscribe my iOS developer program, to then register it again? Lol!
PS: no clue where I should post this, looked over the forums and could not see anything related to singing up, registering for a program...

Our apps came offline automatically shortly after this as iTunesConnect thought we had not renewed our license, even though we had several weeks ago.
We had a brief panic as our apps were offline for 12 hours, which is how long it took Apple Support to work out what was wrong and hook things up.
I suggest you contact them ASAP to get this fixed so you don't get that iTunesConnect alert to your phone 'Your app status has been changed to Pending Contract'.

Using iPhoto together with Adobe Lightroom

I use Adobe Lightroom for my image organizing/tagging needs, since it's way more powerful than iPhoto in this area. I would however like to use iPhoto for my daily image browsing, syncing with my iPhone and for ordering prints/books ++. The way I do this now, is I let iPhoto scan the folder where I have my images. After a while when it gets outdated, I delete the database and rescan in iPhoto. Kinda cumbersome...
So:
1. Is there a way I can make iPhoto rescan my image folder? Maybe some script or something that can do it for me?
2. When I rate images in LR, the ratings are stored in the IPTC Urgency field. When I import to iPhoto it doesn't import this as rating. Any way I can convert IPTC Urgency to iPhoto rating?
3. Would Aperture be a better choice for working together with iPhoto, or would it be just as cumbersome?

In reverse order:
3. Would Aperture be a better choice for working together with iPhoto, or would it be just as cumbersome?
It’s a lot better. You can grab your previews from Aperture right into iPhoto using a Media Browser, but given that Aperture will do all those things - books, syncing with iPhone etc - you’ll probably need to do it less. Like iPhoto, Aperture is integrated throughout the OS, in every Open... Dialogue, through Media Browsers to integrate with other apps and so on. The primary advantage of using Aperture is that +at least the two apps know each other exist+.
2. When I rate images in LR, the ratings are stored in the IPTC Urgency field. When I import to iPhoto it doesn't import this as rating. Any way I can convert IPTC Urgency to iPhoto rating
I don’t think so. There is no real way to move ratings between any apps that I know of. This area of metadata is still in its infancy.
1. Is there a way I can make iPhoto rescan my image folder? Maybe some script or something that can do it for me?
No. However there are apps out there that can watch that folder for you and execute specific actions on events occurring. You may be able to cook up an Automator action or Folder Action script that will import to iPhoto when a file is added to the Folder. Or use an app like Hazel to do it for you.
Update: I’m not sure what this Lightroom plug-in brings to the party, but it may help.
Regards
TD
Message was edited by: Terence Devlin

To sign together with signature image

Similar Messages

Maybe you are looking for