To solve i have to reinstall snowleopard, to reinstall SN i have to solve, help!!!
i just bought an early 2008 macbook knowing that the CD/DVD drive didn´t worked, wich i didn´t mind then....but
leopard was installed in the computer, and i need to install snow leopard,... soo far so god...
to install SN i have to partition the disk (remember CD/DVD drive doesn´t work), but DISK UTILITY fails and deliver the following:
Filesystem verify or repair failed
have already tried to repair disk but fails.
in addition to this the right and left arrows of the keyboard broke down, stopped function (i´ve investigated the web, many people had it, and solved it with reinstall osx)
so, to install snowlepard without CD i have to partition but as filesystem fails cant manage to partition.
please help!!!
i am used to working on MAC but not really t have problems, s i guess i am not really MAC experienced, so if there is one, be gentle/explainfull to that matter.
thanx a lot
Thanks for your response, I did it but doesn't work. I try to catch the web direction from those pages but they gone faster. Any idea?
Similar Messages
-
My points above lay out the problem and I get messages telling me it can't find the files....Why is it not working when it did just fine right up until you came out with version 4???
Any suggestions? I may have to go to another browser, but I have always like your product best.You are welcome. There has never been a need to move that one before, but try it since you can always put it back.
If the same, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite -
Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?
Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta -
I am having a problen syncing my 80gb Ipod to my library. Its been syncing for over 24 hours. I have reset the Ipod and reinstalled Itunes. I am running windows 7 ,6gb of ram.Nothing seem to help. It take 2 miniutes to copy one song(very slow)
UPDATE:
Ok I am offically an idiot.......messed about a bit more and found this post very very helpful:
http://discussions.apple.com/thread.jspa?threadID=396267&tstart=15
Managed to get my ipod restored to factory settings (yay!) However then it was being recognised in windows but not in itunes.......to solve this I referred back to Apples excellent troubleshooting guide. Installed the lastest version of itunes.....and there we go! We have a working ipod! I am so delighted and no longer on the verge of tears! (I so thought I had completely banjaxed my brand new ipod!)
Dell Windows XP -
Cant use iphone in itunes becuse it says i need to install 64 bit. But i already have 64 bit and ive reinstalled it 4 times.
How do i solve it?Solved it by opening the setup file in winrar and reparing "mobilesupport" (or something like that)
-
Please help!!
How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first installation?Thank you for your answers, it helps me a lot.
But sorry for my ignorance. I understand how you mean it, but I don't know how to do it. I'm scared to lose the settings/edits of the images. -
My itunes will not work at all. i have deleted and reinstalled in over ten times, i have ended the process, i have reinstalled quicktime i few times, i have deleted many folders such as TEMP, itunes helper et What else can i do? Please help:(
Now it sometimes keeps coming up and working but once i plug an ipod in it freezes my whole computer up and no i dont get any response from itunes at all
-
Can someone please help me get my iPhone to sync to your computer?
I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
I have tried to open Firefox, but it just sits there and doesn't load. I have tried to uninstall and reinstall but that works for a few hours and then it goes back to not loading. I don't know what else to do to get it too load.
Right-click on your Windows Taskbar and select Start Task Manager. Look in Task Manager for processes running that are Firefox-related, such as Firefox.exe or plugin-container.exe. If you see either of those, right-click each of them and select "End process". Then try again to start Firefox in [[Safe Mode]]. <br /><br />
*If Firefox will start in Safe Mode, select the option you are presented with to disable your add-ons and plug-ins and restart Firefox normally. You likely have a plug-in, add-on, or a combination of two or more that is causing the problem. Because Firefox allows users to customize endlessly, sometimes there can be conflicts between customized items. From the Firefox menu bar, go to<br /><br />Tools -> Add-ons<br /><br />then re-enable them one by one, restarting Firefox after each and testing after each one to see which one or combination of two or more is causing the problem. <br /><br />
*If Firefox will not start in Safe Mode, make sure you again check Task Manager and end any running instances, then uninstall Firefox and download a fresh copy from mozilla.org/firefox using another browser temporarily. Re-install Firefox (see: [[Installing Firefox on Windows]] for more help ) and try running Firefox again.
Please report back your progress. -
Firefox 3.6.8 will not start. I have to go to safe start, click reset to default, ok, then the shutdown box appears, I click cancel and it will open. I have rest profile, uninstalled and reinstalled, clicked alll he boxes on safe start, tried an older version need help. in English
== This happened ==
Every time Firefox opened
== either after I last updated to 3.6.6 or .7 or reset my inernet exploerer values to defaultI had same problem where Firefox 3.6.8 would not start or open. Spent many hours trying different things to fix it. Uninstall of previous version and reinstall did not make any difference. Finally, after uninstalling Firefox, I searched for Firefox folders and files on my computer, deleted and removed all Firefox folders and files - deleted anything and everything related to Firefox so that it will be as if I was going to download Firefox for the first time ever. Then, using another browser, I downloaded Firefox 3.6.8 and installed it. It could be that some Add-Ons or something else from the older version of Firefox or profile was interfering with the new one. It was easier to delete remove everything and install all over again clean than to figure out which part was causing the problem.
Keep in mind, when you delete all Firefox folders and files from your computer, you are deleting all your bookmarks and all your Add-ons. If you want to keep those bookmarks, you might want to save the URLs someplace safe to bookmark them again before deleting them. You need to re-install the Add-ons also. Upon installation, it asks if you want to import bookmarks and settings from another browser or settings you might have. I imported them from my other browser. Now, Firefox works. I also installed up-to-date Add-ons.
I hope this helps. Always keep more than one browser functioning on your computer, just in case one fails. -
My phone is not showing up in itunes. I want to sync it. I have a MAC and I have restarted the phone, it's charged, I have the most current version of itunes. What do I do now? It says to reinstall itunes if you have windows but not for mac. Help!
With your phone plugged in, open Image Capture and see if the iPhone shows up. If not, you are having a sync problem. If it shows up in Image Capture, but not iTunes, I'd delete iTunes and reinstall it.
-
My hard drive has 70.93 GB available, yet when i have more than one internet tab open, i have to force quit google chrome because 'there is no more available application memory'. How can I solve this? I have a 2009 macbook pro running on 10.6.8. I have tried updating to mavericks through the mac app store but after it downloading for a day i got an error message saying there was a problem with the download. The same thing happens if i try to update itunes or the mac app store. After research, i have also tried repairing disk permissions, but every time they do get repaired the 'repair' button still appears, i'm not sure if it's because it was unable to repair the initial problems or if it just keeps detecting new ones.
2 GBs is a minimum in which you can do many things, but not concurrently. Be very careful to not install third-party add-ons, limit the number of applications you choose to enter in Login Items, run as few applications concurrently as you demand.
I would consider adding more RAM to your computer. Your model supports 8 GBs, so I would install that. -
I am getting the following error message when I try to import photos into iPhoto from my camera: "/private/var/folders/GB/GBl4wh8-ELqUVMI5dO-ryU TI/-Tmp-/iPhoto/DSCF2033.JPG". Have already tried removing and reinstalling iPhoto to no avail.
Does this happen if you try to Import to Library within iPhoto, or is it when you connect your camera (and which is set to automatically use iPhoto) that this error message occurs?
If you open Image Capture > Preferences is iPhoto selected as the choice when a camera is connected? -
When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.
Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0
Maybe you are looking for
-
How to skip certain lines for a txt file and insert into array
so here is my question: i had a file to read, and it requires to input into the array starting from a certain line example: 4 john 25 M mary 22 F lee 20 M faye 10 F faye john mary john mary faye i want to insert the friend list, starting 5th line int
-
Correct practice for settings up an RDS Server alongside a WSE2012 server
Hi there, I am configuring a new environment on Windows Server 2012. I would just like to discuss the correct/best practice for setting up a terminal server alongside a Windows Server Essentials 2012 Domain We have the following setup Windows Server
-
HTMLLoader and embeded *.pdf file - get some info
Hi, Is there any way to get some info from embeded in HTMLLoader *.pdf file ? I'm writing a small AIR application which need's for example number of a currently viewed pdf page. I'm using Flash Builder (trail version) and Adobe Reader 9 as a pdf brow
-
Upgrade price for logic X from logic 9
Hi guys. I just Bought Logic 9 3 Months ago. Since i knew where were no news about logic x, no release date or such i expected it to be out at least a year from the time i'd buy it. Now the new version came out of the blue and i just realized that i
-
Unable to open a new library panel
For some reason I am not able to close library panels I've opened. I close them all and I still get the message "Unable to open a new library panel. The limit of ten open library panels has been reached." I close the panels and still I am not able to