To solve the sound problem

i have problem in my computer ,cause this get very slow after open 2 or 3 works

Hi RashisR,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I am unsure if you are having an issue with your sound or your computer's performance is slow.
Here is a link to Using Automated Troubleshooting (Windows 8).
Please select the the correct option and follow the on screen prompts.
There is a link on the document for troubleshooting hardware and sound windows 8.
I am also including this document . Improving System Performance without Adding Memory (Windows 8).
If you would like further assistance, please provide your exact model of HP computer and the results from any troubleshooting steps you have done. Please also confirm what Operating System you are running.
How Do I Find My Model Number or Product Number
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

I bought iphone 4 in US and i and other person not able to listen properly because on the time of conversation voice cracking and difficult to understand each others.so i would like to request you that please solve the above problem.i love my iphone.

Sir,
I bought iphone 4 in US.last 6 month me and other person not able to listen properly the voice because the voice is cracking.i have called earlier about the above problem and they said to upload the new verson 6.1.3 and it will be done but after loading this version still i am facing the same problem.so ,i would like to request you that please solve the above problem as soon as you can.I will be thankful to you.i love my apple Iphone.
waiting for your earliest reply.
thanks
Rajeev Gupta

Hello sir
As you know about my iPhone 4 which has a problem of voice cracking so I would like to replace to other phone like IPhone 5s.I will pay the replacement charges immediately.i am reaching miami on 19th of janvary 2014 so I would like to request you please arrange my appointment on the Apple store,dadeland mall ,miami at 15.00pm as I will reach miami at 13.00pm and my flight to India at 19.00pm.
Last time you told to replace at miami on 26th of September but without oppoimtment they have not entertained me.so I would like to request you that please arrange my appointment this time
I will be thankful to you
Rajeev Gupta

How do I solve the memory problem ( 5 beeps ) upon startup?

hp compaq d530SFF, how do I solve the memory problem (5 beeps ) upon start up?

Hi:
You already know the answer to that!
http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/when-I-try-to-boot-up-lighs-flash-red-and...
Paul

Will the next IOS update 5.0.2 solve the batter problem of my iphone 4s?

will the next IOS update 5.0.2 solve the batter problem of my iphone 4s?

Let me check my Magic Eight Ball..... All signs point to "Yes"
All kidding aside, We all hope so!!

How to solve the setColor() problem with multithreading?

My fractal program uses a custom number of threads to draw the complete image. If I use just 1 thread, the image looks clean, if I use more threads some pixels of the image gets other colors. The problem ist the painting code:
g2d.setColor(col);
g2d.drawLine(x, y, x, y);as it is necessary to first set the color of the graphics object and then draw the line. I can solve this pixel color problem by synchronizing the Graphics2D object:
synchronized (g2d) {
g2d.setColor(col);
g2d.drawLine(x, y, x, y);
}but this slows the code down to times where just 1 thread is calculating the image. Unfortunately, I can't find a draw() method that has a color parameter.
I tried to divide the panel into multiple BufferedImages (1 for each thread) which solves the pixel problem but only the first BufferedImage get's drawn.

I solved my problem now. My solution is to use a separate BufferedImage for each Thread. I still had a bug where i didn't transformed the x/y coordinates of the complete image to the shifted x/y coordinates of the single BufferedImages, so that the threads draw the image out of the visible area which looked like all threads after the first only had a black image. After adjusting teh coordinates, the fractal now gets drawn correctly. And boy it's much faster with multiple threads - even on single core systems. On a dual core system, using 10-20 threads about doubles the performance as both cores have work almost all the time until the fractal is finished. :-)

When Should I Correct The Sound Problems?

I have a set of interview clips in an iMovie '08 project. Originally the video was recorded with two mikes, with one mike on each channel ( L and R). Unfortunately, on some of them, the mike level for one of my interviewees is much lower than for the other, which I need to correct. I also want to put the sound from both mikes onto both the L and R channels, instead of one on each channel.
I have done all my splitting and transitions and titles all that stuff, and am ready to export the clips into a final movie. However, I need to sort out the sound problems.
So - my question is this: is it better to fix the sound in iMovie '08 first, before exporting - and if so - what the best way to do this? Or should I export the movie, and if so, into what format, and how would I then edit the sound? I do own Final Cut Express but have never used it.
Or... is there a better way than these [e.g. exporting into some other program BEFORE compiling into a final movie, and then bringing back into iMovie '08]?
Thanks!
Message was edited by: gbracegirdle

Kanan, the difference you already know, blade .vs rack mount. There are some CPU differences, but not much. Both can be managed by UCSM in version 1.4.x
So it really is ones preference on what you are using it for and how scalable you want things to be for future expansion.
Blades: easy, as you can buy a chassis and have 2 blades in that one chassis and add blades as needed. If using boot from San, can get a server back up in minutes
Rack mount: can take rack space more quickly, takes time to duplicate in case of a failed server
Very small differences, but hope this helps to start the wheels turning.
Good Luck!
Sent from Cisco Technical Support iPhone App

When apple will solve the wifi problem ?

when apple will solve the wifi problem ?

They keep trying, but haven't yet in all the time OS X has existed. Every version of OS X has had some WiFi issue with some group of users. The normal pattern is they release a fix for one group, and another group develops a new WiFi problem.

How to solve the footer problem?

In germany since the beginning of 2007 all business emails must be stamped by a company footer.
This sounds simple [Outgoing Content filter, add-footer ] but in reality it is a big problem, because most of users don't want to have a the company footer at the end of the email if they are sending a reply.
They expect the footer at the end of the new part they have written.
So the solution can be to use hard coded placeholder generated by the initial email system that is replaced by Ironport with the footer (depending on the company the user is a member of, different footers can be used e.g. by a ldap group query.)
:?: But ... How to replace the placeholder? It seem that this is not possible with Ironport or does anybody has an idea?
:idea: Another way to solve the problem can be to use a "Stamping header" instead of a footer. Such a header will be always at the top of the new part of an email, when you send a reply.
I asked support, it will be added to the wishlist for new releases.
So so far this is not a solution or does anybody know a workaround?
Regards
Stefan

In germany since the beginning of 2007 all business emails must be stamped by a company footer.
This sounds simple [Outgoing Content filter, add-footer ] but in reality it is a big problem, because most of users don't want to have a the company footer at the end of the email if they are sending a reply.
They expect the footer at the end of the new part they have written.
So the solution can be to use hard coded placeholder generated by the initial email system that is replaced by Ironport with the footer (depending on the company the user is a member of, different footers can be used e.g. by a ldap group query.)
:?: But ... How to replace the placeholder? It seem that this is not possible with Ironport or does anybody has an idea?
:idea: Another way to solve the problem can be to use a "Stamping header" instead of a footer. Such a header will be always at the top of the new part of an email, when you send a reply.
I asked support, it will be added to the wishlist for new releases.
So so far this is not a solution or does anybody know a workaround?
Regards
Stefan
Hello Stefan,
we have the same problem and found the best solution to do is to have company rules that apply on the client side.
This decission is based on the fact that already many companies use client based signatures (s-mime) and also client based encryption which makes a gateway solution impossible.
We found a nice solution for exchange/outlook based on group policies
Aas we are almost neighbours you are invited to visit us.
Greetings from Greven/Münster

Any resolution to the sound problem?

I have been having the same sound problem with my Mid 2010 Mac Pro tower ever since I got it. I have been in touch with Apple and have been told that they are familiar with the problem, but that they are still working on a fix. The problem is that I have external speakers, and every time I shut down and then start up again, I have to go to preferences and physically change the sound output to go to the speakers. I have also been tole that the Mac is supposed to sense the external speakers and go directly to them.
Is there anybody else out there with this problem, and has been able to resolve it?
Thank you.

I have a 2010 Mac Pro and use the stereo line out jack in the back of my machine for my speakers with no problem. I don't recall any problems setting it up. But check the Audio MIDI Setup (in your utilities folder) to see if you can set it from there (should be able to). Not sure why the preference wouldn't stick. And I don't believe there is automatic detection of an attached sound output device where the sound preference switches to that (unless maybe the front jack which I never use).

TS1559 WIFI solutions proposed by Apple are not working. Does oneone how to solve the WIFI problems?

Dear Apple.
I was really happy with my iphone4s, IOS 6.0, great product amazing quality and posibilities BUT.......
I updated from IOS 6.0 to 6.1.1. and the WIFI nightmare started.
I waited for a new update to fix the WIFI problems and I updated my iphone 4s from 6.1.1. to 6.1.2. in order to solve these problems related with WIFI connections.
But IOS 6.1.2. is even worst:
- WIFI is not working at all. So I cannot download apps greater than 50MB.
- Battery life is shorter than ever.
- 3G goes in and out every minute.
- When you operate the iphone4s you can realize that is hotter than before.
These problems are unnaceptable and inconsistent with a high quality standard product.
You can read a lot of blogs, I am not the only one.
Please give us a solution as soon as possible.
Best Regards
AICITEL

Thank you for your support.
My router is a TL-WR740N, and I think it has only a 2.4-2.4835GHz antenna.
So it seems that I have to keep on trying.
I also tryed to rename the router, still nothing.
Thank you anyway.
FYI.
4 puertos LAN de 10/100Mbps
1 puerto WAN 10/100Mbps
Botón
Botón de configuración rápida de seguridad
Botón de reinicio
Suministro de Energía Externa
9VDC / 0.6A
Estándares Inalámbricos
IEEE 802.11n*, IEEE 802.11g, IEEE 802.11b
Antena
omnidireccional fijo de 5dBi
Dimensiones (Largo x Ancho x Alto)
6.9 x 4.6 x 1.3 in. (174 x 118 x 33 mm)
Frecuencia
2.4-2.4835GHz
Velocidad de Señal
11n: Hasta 150Mbps (dinámico)
11g: hasta 54Mbps (dinámico)
11b: hasta 11Mbps (dinámico)
EIRP
<20dBm(EIRP)
Sensibilidad de Recepción
130M: -68dBm@10% PER
108M: -68dBm@10% PER
54M: -68dBm@10% PER
11M: -85dBm@8% PER
6M: -88dBm@10% PER
1M: -90dBm@8% PER
Funciones Inalámbricas
Activar / Desactivar radio inalámbrica, WDS Bridge, WMM, estadísticas inalámbricas
Seguridad Inalámbrica
64/128/152-bit WEP / WPA / WPA2,WPA-PSK / WPA2-PSK
Tipo WAN
IP dinámica / IP estática / PPPoE /
PPTP (Acceso dual) / L2TP (Acceso dual) / BigPond
DHCP
Servidor, cliente, lista de cliente DHCP,
Reserva de dirección
Calidad de Servicio
WMM, Control de Ancho de Banda
Redireccionamiento de Puertos
servidor virtual, Port Triggering, UPnP, DMZ
DNS Dinámico
DynDns, Comexe, NO-IP
Puerto de Transferencia VPN
PPTP, L2TP, IPSec (ESP Head)
Control de Acceso
Control Parental, Control de Manejo Local, Lista de anfitriones, la Lista de acceso, manejo de reglas
Seguridad Firewall (cortafuegos)
DoS, SPI Firewall
Dirección IP Filtro / Filtro de dirección MAC / filtro de dominio
Conexiones de direcciones IP y MAC
Management
Control de acceso
Manejo Local
Manejo remoto
Certificación
CE, FCC, RoHS
Contenido del Paquete
TL-WR740N
1 fijo antenas omnidireccionales
Fuente de alimentación
CD de recursos
Guía de instalación rápida
Requisitos del Sistema
Microsoft ® Windows ® 98SE, NT, 2000, XP, Vista ™ o Windows 7, Mac ® OS, NetWare ®, UNIX ® o Linux.
Ambiente
Temperatura de funcionamiento: 0¿ ~ 40¿ (32¿ ~ 104¿)
Temperatura de almacenamiento: -40¿ ~ 70¿ (-40¿ ~ 158¿)
Humedad de funcionamiento: 10% ~ 90% sin condensación
Humedad de almacenamiento: 5% ~ 90% sin condensación

HT5675 will this fix the sound problem? my audio always crashes on browser

if i leave chrome or skype open for a day, the audio will stop working alltogether, then i have to force quit app

I am in the same situation. I've been given the okay to purchase Acrobat 3D. It worked very well with SW2007. I've since upgraded to SW2008 SP3.1 (Vista 64). Now Acrobat won't convert or capture the SW2008 SP3.1 files. The error states that the format isn't supported. I can still convert my SW2007 files, but that doesn't solve the problem
I think Adobe has fallen behind and CAD software companies aren't allowing you to save to earlier versions anymore. I don't intend to purchase Acrobat 3D until this problem is dealt with. I'm not holding my breath.

Trying to solve the hashtable problem;

this is a test of a part of my programming, trying to solve the hashtable
i took out the erronous part and change some of it.i'm trying to print out a table of data with 4 column
import java.util.*;
public class test {
     // creating a global hashtable name "b" its
     //static just for the convieniet of it
static Hashtable b = new Hashtable();
public static void addItem(String keyid, String t, double p, int q){
// array size of 4 for my value in hashtable "b"
String [] array = new String [4];
// puting all my variables into string array
//including my keyid as the first in array[0]
     array[0]=keyid;
     array[1]=t;
     array[2]= String.valueOf(p);//casting of double type to string
     array[3]= String.valueOf(q);//casting of int type to string
     b.put(id,array);//setting key = id and value = my array[]
public static void main (String args[]) throws Exception {
     String numb = "009", piss="theone";
     double cost = 19.50;
     int a = 1;
     String [] testItem;
     addItem(numb,piss,cost,a); //call of method additem;
     Enumeration e = b.keys();
// Get all values
while ( e.hasMoreElements())
{            tempItem = (String [])e.nextElement(); **// error msg here**
     System.out.println("array element 1"+tempItem[1]);
     System.out.println("array element 2"+tempItem[2]);
     System.out.println("array element 3"+tempItem[3]);
this is my error msg "ClassCastException: java.lang.String cannot be cast to [Ljava.lang.String;"
1 =====>cannot find symbol
symbol : variable id
location: class test
        b.put(id,array);//setting key = id and value = my array[]
2 ===>cannot find symbol
symbol : variable tempItem
location: class test
tempItem = (String [])e.nextElement();
3 ====>cannot find symbol
symbol : variable tempItem
location: class test
System.out.println("array element 1"+tempItem[1]);
is there anyway to solve this or anyone can provide me with an alternative way of printing a table with 4 col?

you should learn to post your code inside code tags
mangotree wrote:
1 =====>cannot find symbol
symbol : variable id
location: class test
b.put(id,array);//setting key = id and value = my array[]there is nothing called "id"
mangotree wrote:
2 ===>cannot find symbol
symbol : variable tempItem
location: class test
tempItem = (String [])e.nextElement();
3 ====>cannot find symbol
symbol : variable tempItem
location: class test
System.out.println("array element 1"+tempItem[1]);there is nothing called "tempItem"
mangotree wrote:
this is my error msg "ClassCastException: java.lang.String cannot be cast to [Ljava.lang.String;"
here you are iterating through the keys of the hash table ("b.keys()"), and your key is a String, not a String[; perhaps you want the value instead?

How to solve the certificate problems in Java Web Start

Hi, All,
I encounted these two problems recently:
(1) I have an application which is supposed to be started by Java Web Start. I have written my own code which calls other .jar files from other companies. Since for web start, you need to sign all .jar files if you want more permssions. Now I got the following problem:
'=================================
An error occurred while launching/running the application.
Title: My stuff
Vendor: UCLA
Category: Launch File Error
JAR resources in JNLP file are not signed by same certificate
=================================
How to go around this? It seems that the .jar files from that company has been signed already. Then I tried to uncompress those jars and re-archieve again, then sign it again using the keystore I used to sign my own .jar files. It still does not work. Any help on this will be appreciated!
(2) Afterr I signed a .jar file, when I want to run it again, using command: java -jar abc.jar
It does not work any more, I am not sure whether it will become a problem if loaded by Web start.
Thanks a lot!
David

In another forum answer, a user named Dietz suggested the following:
If you have a library signed by another signer, you need to factor it out into a seperate extension jnlp file.
AJones0131

Anyone solved the sound issue for UK Sky viewers?

Hi,
At the moment, I have a Sky STB feeding into the MSI 8606, when I try to use the small audio link cable, the sound is fine for 1 minute or so, then vanishes... I have no screensavers or any scheduled tasks.
The only solution at the moment is to feed a separate sound feed into the Line-in of the sound card.
I believe this is an issue with the way PAL is encoded for use with Sky, and would probably be fine when connected directly to the Aerial.
Anyone got a solution?
As an aside, I am considering building a linux PVR based on MythTV has anyone got the MSI 8606 to work with this type of installation?
Thanks
RevJim

Quote
The only solution at the moment is to feed a separate sound feed into the Line-in of the sound card
i believe that is the better solution. as long as your recording program (MSIPVS) has the Line-In set as recording source, you shouldn't have any problems

How do you fix the sound problem due to software 10.6.8

my speakers work when i turn on my computer they make the sound but when i try to listen to something on itunes it doesnt work.

obush1 wrote:
when i try to listen to something on itunes it doesnt work.
What's iTunes' volume setting?

To solve the sound problem

Similar Messages

Maybe you are looking for