To the user " the@Xpert "

hai
the same questions
sensd a sms from computer to mobile
my emailid --- [email protected]
thank u
regards
rex

hai
the same questions
sensd a sms from computer to mobile
emailid --- [email protected]
thank u
regards
exHaving studied the above I can conclude that the language, whilst appearing to the casual observer to be English is in fact related to a form of incoherent rambling favoured by sherried up winos.

Similar Messages

Given the the user the right to save site template

Hello,
how can i give a user the right so save a site as site template. Being in the "Site Owners" group didn#t seem to be enough to do that.
Like written in the manual: https://support2.microsoft.com/kb/2420856?wa=wsignin1.0
the menu entry "Save site as template" just don't exist for all "Site Owners" users.
Thank you.

Hi Mafrei,
Thanks for posting your query, Saving a site as a template creates a Site Template.
Creating a web template in Visual Studio using the new WebTemplate feature creates a Web Template.
When the Publishing features (web or site collection scoped) are activated it is not supported to save your site as a template. If you do want to save your site as a template using the SharePoint user interface you should not activate the publishing features.
If you do need to activate the publishing features you should create web templates using Visual Studio instead of saving your site as a template through the user interface.
I hope this is helpful to you. If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog: http://sharepoint-community.net/profile/DharmendraSingh

How to avoid the user selecting a different path in my installer

Hello again all you helpful forum-goers!
I have an application and a corresponding installer, and then I have a separate installer putting some support files in the same directory. My problem is that if the user selects a different path to which to install my primary application, the secondary installer will not put the required support files in the same spot.
Now, I think I've figured out how to get the user-selected path from the "Run executable at the end of installation" option in the Advanced pane of the LabVIEW installer configuration, and I can pass that in to my secondary installer, and that should fix the problem. However, what I'd really like to do is just not give the user the option to install my primary application in a different directory to begin with. I've looked, but cannot find any way to do that.
Does anyone know of any way to not present the option to install an application in a different directory when using the LabVIEW installer?
Thanks in advance for any suggestions,
-Joe

Ben64,
That's great! Thank you so much for your quick reply. The only reason I haven't already accepted that as my solution is that it requires a manual post-compile change to a text file. Ideally I'd prefer not to have to remember to do that every time I rebuild my installer. Is there any way that you know of to automate the process?
If not, I'm happy to have a good solution even if it takes an extra step each time to implement.
-Joe

Convert the spool to xls format and email through attachment to the user

Hi all,
When I execute a report in background, I get spool. I need to convert the spool to xls format and email through attachment to the user.The xls file should not be saved on local system.
If I use the Spool Recepient tab in SM37 it mails the spool list as .txt file to the mail receipient. But I need to send it as an .xls file.
Can any one help me on this

Did you get the solution? i have the same problem.

Is there a way to find the email address of the user's from SCCM database.

Hi All,
I am using SCCM 2012 R2 and trying to find a query/report that can help in finding the email address of the user the machine is assigned to (Primary device). And if that is a machine which is being shared between different user, I need to gather the same
information or the user who last logged on that machine.
Can you please help?
Thanks
Manish

My opinion: I think you'll need to define what, to you, means "primary user". a primary user relationship can be defined manually by you one by one in the console, automatically by usage, imported via script, or the end user (if they know
how and you've allowed this in settings) can indicate a machine is a primary machine for themselves.
How is primary user relationship set, in your environment? Depending upon how that relationship is determined in your environment, then you can track for that particular machine how or why the relationship you expect to be there, isn't the relationship
the database acknowledges.
Standardize. Simplify. Automate.

How to verify that the user has changed table row data before db update

Hi all,
Iam using Oracle ADF with EJBs.
I have a single selection table that displays rows of data returned from a function of my data control.
The columns of my table are editable so that the user can change the data. The user selects a row, changes the data in one or more columns of the row and saves the data by means of a submit button. The code in the submit button, identifies the row of the corresponding iterator that the user clicked on and updates the data in the database (using the 'mergeEntity' function of the EntityManager)
Before saving the data, I want to put some logic to check whether the user has actually changed some data to avoid unnecessary updates in the database . But for this I need a technique to detect that the user has indeed changed some data in the table row.
One technique I have been using so far was to isolate the iterator row of the table and then query the corresponding row in the database table and compare their values.
Except from dummy, this technique is not efficient if the table contains many rows.
Moreover, in my case I have observed that on successive updates on the same row , the query on the database returns the new values (user changed values) and not the actual values contained in the database table. This means that when the user updates an iterator row the cached data affect also the results of the SELECT statement from the actual database table!!! Isn't this strange ?
Can somebody propose me a neat method to detect when the user has changed the the data of an iterator row ?

Hey Alan,
The below solution seems overly complicated to me and can not be implemented without a custom screen and/or the use of JavaScript. Also, if your main concern is that a user may accidentally loose all their data because they closed the browser window or the session times out before they hit the save button then this solution does not help you.
There are a couple of simpler approaches you can take here:
# If the use of JavaScript is permissible you can hook into the windows 'onUnload' event, and pop-up a message box which gives the user the opportunity to cancel closing the window and save their case if they haven't already.
# Implement an autosave feature by hooking into one of events provided by web determinations. A simple (but rather naive) way of doing this would be to hook into the OnRenderScreenEvent and call save on the interview session every time the event fires. This guarantees that all the data the user has submitted will aways automatically be saved, thereby removing the need to make sure the user manually saves their data before closing the browser.
Automatically making Web Determinations close a browser window has to be done using JavaScript. However, doing so means that a) it won't work for people who turn off JavaScript, which is commonly done for accessibility reasons b) you'll likely run afoul of the browser's security mechanism (they generally won't let you close a window that you didn't open and some really don't like you doing that at all).
Thanks,
Kristy

Error while giving permission to the users

hi..
while giving the grants to the users I have created, it is showing "Account not found"..
I have logged in through the credentials of Administrator and went to Administration--> manage interactive dashboards
There when i am clicking on Show Users and Groups, then i can see all those.
But when i am trying to give the users the necessary permissions, it is showing the above error.
please help...

Hi,
I dnt understand ur 1st question.what u meant by uniq filed where u create user?
and for ur second question, u can check all ur users from dba_users.for their privilages, to check on permission, it's dba_tab_privs. I dnt knw if this is what ur asking for but here is the script.
SELECT t.grantee "User ID",t.privilege "Privilege",o.object_type, o.object_name, '' column_name
FROM dba_tab_privs t, dba_objects o
WHERE t.owner = o.owner
AND t.table_name = o.object_name
AND NOT o.owner IN ('SYS', 'SYSTEM')
AND NOT t.grantor IN ('SYS', 'SYSTEM')
AND t.grantee in (select username from dba_users
where username not in ('SYS','SYSTEM','))
AND NOT o.object_type IN ('QUEUE', 'TRIGGER', 'DIMENSION', 'CLUSTER',
'INDEX', 'INDEX PARTITION', 'INDEX SUBPARTITION', 'TABLE PARTITION',
'TABLE SUBPARTITION', 'JAVA CLASS')

Problem while assigining the role to the user

Hi,
I have creadted one new user and role. then add some worksets which exists in another folder.
when logged to the new user i can able o see the worksets with error message.(which is working fine with old user)
Please help me how to add the worksets to the new role.
Error Message
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Name or password is incorrect (repeat logon)
     at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:989)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3193)
     at com.sap.mw.jco.JCO$Pool.initPool(JCO.java:4662)
     at com.sap.mw.jco.JCO$PoolManager.getClient(JCO.java:6060)
     at com.sap.mw.jco.JCO$PoolManager.getClient(JCO.java:6015)
     at com.sap.mw.jco.JCO.getClient(JCO.java:8663)
     at com.sap.mw.jco.webas.WebDynproExtension.addClientPool(WebDynproExtension.java:133)
Please tell me how to solve this problem.
Edited by: Srinivas Reddy K on Feb 13, 2008 8:49 AM

Hello Srinivas,
The issue is not with the user, the problem is with the JCo connection user,
navigate to Content Administration-> Web Dynpro-> Maintain JCo connections.
and Test all the JCo connections which are green and make if there is any error click on edit and check whether the user and password you gave for the connections are working or not.
If the test fails, go to SU01 t.code and change the password or unlock the user. it will resolve the issue.
Most of the cases the user used is locked.
Hope this helps,
Cheers-
Pramod
Reward Points if Helpful.

Can I create a form that allows users the ability to add fields?

I would like to create an asset order form I can host on my company's intranet. I would like to give the users the ability to add additional fields per item they request rather than provide them with a limited amount of fields. For example, the template available from Formscentral has 5 dropdown selection boxes with predetermined supplies to choose from. My office receives requests for multiple, varying assets that I would not be able to list in generic dropdown selection boxes. I want to give users the freedom to enter item titles and provide URLs to online stores they would like me to purchase them from. I want my form to begin with two fields for this information and provide users with an add button that creates two additional fields for each additional item requested.

Hi,
In Acrobat Form, you create a hidden Text Field which will only get visible on a Button click for inserting additional text.
Regards,
Anoop

Need to display last login details to the user after they login into portal

Hi All,
As per our requirement ,we need to display to the user,the following things:
1.Last login date and time will be maintained and displayed to the user after login.
2.Last unsuccessful login date and time will be maintained and displayed to the user after login.
3.No. of unsuccessful retrials before locking the user will be maintained and displayed to the user after login.
Therefore we are creating a webdynpro application wherein we are making use of the UME API and trying to retireve these information.
The methods i am using are:
IUserAccount.getLastFailedLogonDate() // To fetch the Last unsuccessful login date and time
IUserAccount.getFailedLogonAttempts() // No. of unsuccessful retrials
IUserAccount.getLastSuccessfulLogonDate() // Last login date and time
But the problem is IUserAccount.getLastSuccessfulLogonDate() is deprecated and i unable to use it,and also i am unable to get the value *IUserAccount.getFailedLogonAttempts() * I am only geting zero.Can anybody let me know alternative method to get this details.
Request you to guide me and help me to resolve this issue.
Thanks and Regards,
Nishita Salver

Hi,
I hope you are trying to show your login date from SharePoint List.
My suggestion is
1. by using ECMA Script ,retrieve values from that list and show the same in Master Page.
2. If you are not comfortable with ECMA, develop Visual Webpart and add the Visual Webpart in master page by using SharePoint Designer.
Please let me know ,if you need further guidance.
Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
Mahesh

Providing users the ability to Merge using a DAT file under Windows 7

Hello,
Our organization uses older software that uses Word Templates with Merge Fields, pulling data out of a SQL database. The software itself is old and out of date, but still works under Windows 7. The problem I am having is that the software will
place its own macros inside of Normal.dot to properly merge fields using the Word Templates.
Each Merge document accesses the application folder and goes into a sub-folder to access a file called WORDDATA.DAT that is the data source for the merge. Each workstation has their own WORDDATA.DAT file stored locally in C:\APPLICATION\temp\
In XP (we never used Vista), the proper way to get these merges to work was to do the following:
1. Provide Power Users (see below) with Modify rights to the main APPLICATION folder and propagate those rights down to all files underneath of it (including WORDDATA.DAT). We also had to remove inheritable permissions from the root drive (C).
2. Add Domain Users to Power Users group (for some reason the merges on XP would not work without this) so that anyone logging onto the machine could merge.
3. These templates required the Low security setting for macros in Word for the merge to work properly.
The problem I am facing now is that I cannot get the merges to work properly under Windows 7 Pro without giving the user Administrator rights on the local machine. This is obviously not a good idea. No matter what I try, nothing seems to work.
I've disabled UAC on these machines. Given Full Control rights to the application folder and all sub-folders and have even gone so far as to make the user the Owner of the application folder. But no matter what I do, the merge will not work unless
the user is added to the local Administrators group. I've also noticed strange behavior with WORDDATA.DAT, where it will not relinquish the Read-Only attribute. After running 'attrib' and stripping it of Read-Only and System attributes, the file
reverts to showing Read-Only in the properties. I don't know if this matters or not, but it appears as if Windows will not let anyone modify that file completely.
Does anyone have a suggestion for a workaround? Keep in mind, 1. Disabled UAC, 2. Running the application under Compatibility Mode for XP.
I realize we are using outdated software and this can cause some issues of course, but the basic principle of merging documents works. It has nothing to do with the application itself IMO but seems to be more of a security issue.

I guess I'm completely out of luck on this issue huh? The basics of the problem are simply that unless the user is added to Administrator local group on the Win7 machine, when the merge runs and has to use WORDDATA.DAT, it cannot and the merge fails.
Add the user as an admin and it works but this leaves our systems vulnerable, particularly with users who are happy to just double-click on any old attachment without checking it first.

System aliases are not copied to the user

Hi,
I have a problem with role assaignment. When I am assaign a role to the user the alias systems are not working there. i.e. System Alias is not copied to that user. I haven't seen any system in usermapping.
please reply,

Rajesh,
is SSo configured.If SSo is configured it will not ask for username and password .if not check these links
Quick Guide for setting up SSO between EP and R/3
SAP Logon Ticket-based Single Sign-On
http://help.sap.com/saphelp_nw04/helpdata/en/94/f2503ede925441e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/46/55195e4e5d41b095d0371fa9df2781/frameset.htm
Connecting SAP systems to Enterprise portal with SSO.
do a search in sdn and you will find los of documents
Thanks
Bala Duvvuri

Help:allow the user to select which 3 waveforms he want and plot in one graph

Hi all
I have a question and I am kind of lost. I used block diagram to generate 5 Waveform and I want to give the user the ability to pick up three waveform in plot it in one graph.
I tried to to do in formula node but as I know I can't wire it together .
can any one tell me how to fo it
thanks

never get own wrote:
thanks for ur respond
i will be generating the waveform from block diagram. my only questions how can i plot them together in one graph or chart.
lets say i have sin, triangle, square waveform and need to plot them all in one graph.
Use an array. Please look at the examples that ship with LabVIEW. They show you how to use the chart, waveform graph, and XY graph. If you turn on Context Help and place the cursor on the graph's terminal on the block diagram you will also get a short review of how to send data to the chart/graph.

How do u handle the user parameters for a currency field.

How do u handle the user parameters for a currency field.
   Decimal saperator and a hundreds saperator. (depending upon the user parametes set for the user the saperators may differ)
      Eg: currency field: 13.896,01 (In this case u2018,u2019 is a thousand saperator and u2018.u2019 is a decimal saperator) How to handle this one.
Regards,
Ram.

Hi,
Try this code....
DATA: V_KURSF1 TYPE c LENGTH 10,
        v_kursf2 type c LENGTH 10,
        v_dcpfm    TYPE xudcpfm, "Decimal or Thousand Notation
        v_thousand TYPE char1,   "Thousands Notation
        v_decimal TYPE char1.   "Decimal Notation
CONSTANTS:    c_x      TYPE char1 VALUE 'X',
                c_y      TYPE char1 VALUE 'Y',      "Value Y
                c_comma TYPE char1 VALUE ',',      "Comma
                c_point TYPE char1 VALUE '.',      "point
                c_blank TYPE char1 VALUE ' '.      "Blank
IF v_dcpfm IS INITIAL.
    SELECT SINGLE dcpfm
    FROM usr01
    INTO v_dcpfm
    WHERE bname = sy-uname .
    IF sy-subrc = 0.
      CASE v_dcpfm.
        WHEN c_x.
          v_decimal = c_point.
          v_thousand = c_comma.
        WHEN c_blank.
          v_decimal = c_comma.
          v_thousand = c_point.
        WHEN c_y.
          v_decimal = c_comma.
          v_thousand = c_blank.
      ENDCASE.
    ENDIF.
   ENDIF.
           Find c_point in wa_segment-exchange_rate. ( Eg:ield)
          if sy-subrc = 0.
            replace c_point in wa_segment-exchange_rate with v_decimal.
          endif.

Make the program run again, given the user's input?

Hello,
I need a little help with this program, you can see the entire thing below. I'm trying to make the program give the user the option to run again, using y or n. It's for a college project. Thanks.
import java.util.*;
class MyFifthProgram
     public static void main (String[] args)
          //char letterOnTelephone;
          do
               System.out.print("Enter a letter from A - Z and I will output the corresponding number \non the telephone, then press enter:");
               Scanner keyboard = new Scanner(System.in);
               String letterOnTelephone = keyboard.next();
               char letter = letterOnTelephone.charAt(0);
               switch (letter)
                    case 'Q':
                    case 'q':
                    case 'Z':
                    case 'z':
                         System.out.println("Sorry, the letter " + letterOnTelephone + " cannot be found on the telephone....");
                         break;
                    default:
                         System.out.println("Sorry, the key " + letterOnTelephone + " cannot be found on the telephone......");
                         break;
                    case 'A':
                    case 'a':
                    case 'B':
                    case 'b':
                    case 'C':
                    case 'c':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 2.");
                         break;
                    case 'D':
                    case 'd':
                    case 'E':
                    case 'e':
                    case 'F':
                    case 'f':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 3.");
                         break;
                    case 'G':
                    case 'g':
                    case 'H':
                    case 'h':
                    case 'I':
                    case 'i':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 4.");
                         break;
                    case 'J':
                    case 'j':
                    case 'K':
                    case 'k':
                    case 'L':
                    case 'l':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 5.");
                         break;
                    case 'M':
                    case 'm':
                    case 'N':
                    case 'n':
                    case 'O':
                    case 'o':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 6.");
                         break;
                    case 'P':
                    case 'p':
                    case 'R':
                    case 'r':
                    case 'S':
                    case 's':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 7.");
                         break;
                    case 'T':
                    case 't':
                    case 'U':
                    case 'u':
                    case 'V':
                    case 'v':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 8.");
                         break;
                    case 'W':
                    case 'w':
                    case 'X':
                    case 'x':
                    case 'Y':
                    case 'y':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 9.");
                         break;
               System.out.println("Would you like to run this program again? Enter Y for yes, or N for no:");
               Scanner keyboard1 = new Scanner(System.in);
               String runAgain = keyboard1.next();
               char runIt = runAgain.charAt(0);
               }while (runIt == 'y');
                    System.out.println("You can choosen " + runAgain + " therefor the program will run again.");
     }

Thanks! That did the trick, however that doesn't solve my problem. How do I ask the user to run the program again at the end of the program? What am I missing?
// Program takes a single letter and displays the corresponding digit on the telephone.
import java.util.*;
class MyFifthProgram
     public static void main (String[] args)
          System.out.println("Would you like to run this program? Enter Y for yes, or N for no:");
          Scanner keyboard1 = new Scanner(System.in);
          String runAgain = keyboard1.next();
          char runIt = runAgain.charAt(0);
          if (runIt == 'n')
               System.exit(0);
          else if (runIt == 'N')
               System.exit(0);
          do
               System.out.print("Enter a letter from A - Z and I will output the corresponding number \non the telephone, then press enter:");
               Scanner keyboard = new Scanner(System.in);
               String letterOnTelephone = keyboard.next();
               char letter = letterOnTelephone.charAt(0);
               switch (letter)
                    case 'Q':
                    case 'q':
                    case 'Z':
                    case 'z':
                         System.out.println("Sorry, the letter " + letterOnTelephone + " cannot be found on the telephone....");
                         break;
                    default:
                         System.out.println("Sorry, the key " + letterOnTelephone + " cannot be found on the telephone......");
                         break;
                    case 'A':
                    case 'a':
                    case 'B':
                    case 'b':
                    case 'C':
                    case 'c':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 2.");
                         break;
                    case 'D':
                    case 'd':
                    case 'E':
                    case 'e':
                    case 'F':
                    case 'f':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 3.");
                         break;
                    case 'G':
                    case 'g':
                    case 'H':
                    case 'h':
                    case 'I':
                    case 'i':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 4.");
                         break;
                    case 'J':
                    case 'j':
                    case 'K':
                    case 'k':
                    case 'L':
                    case 'l':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 5.");
                         break;
                    case 'M':
                    case 'm':
                    case 'N':
                    case 'n':
                    case 'O':
                    case 'o':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 6.");
                         break;
                    case 'P':
                    case 'p':
                    case 'R':
                    case 'r':
                    case 'S':
                    case 's':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 7.");
                         break;
                    case 'T':
                    case 't':
                    case 'U':
                    case 'u':
                    case 'V':
                    case 'v':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 8.");
                         break;
                    case 'W':
                    case 'w':
                    case 'X':
                    case 'x':
                    case 'Y':
                    case 'y':
                         System.out.println("The letter " + letterOnTelephone + " corresponds to the number 9.");
                         break;
               }while (runIt == 'n');
          //          System.out.println("Would you like to run this program? Enter Y for yes, or N for no:");
          //          Scanner keyboard2 = new Scanner(System.in);
          //          String runAgain1 = keyboard2.next();
          //          char runIt1 = runAgain1.charAt(0);
          //          if (runIt1 == 'n')
          //               System.exit(0);
          //          else if (runIt1 == 'N');
          //               System.exit(0);
     }

To the user " the@Xpert "

Similar Messages

Maybe you are looking for