To Top Up using 16 digit Number
How do I enter my given 16 digit number to Top Up my Phone ?
Hi ,
Please click here for information on topping up the phone.
Thanks.
Similar Messages
-
I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114. Online I found a discussion that stated i needed to delete contact and re-add. I have done that to no avail. Any ideas?
I had the same issue with the iPhone 6 and tried everything! I now understand that at some point I stored a number for a contact without including the area code and sent a text message. So, to correct the issue, you must literally "erase" all references to the contact, not just the number. Deleting the contact and entering a new one is not enough because the iPhone stores references to that number in multiple places. The steps below worked and are very simple:
1) On the contact screen, delete everything stored for that number. You can't just edit the contact to fix the problem, so write down or record the info somewhere before you complete this step. Choose edit and then select DELETE to eliminate the entire contact which means home, work, cell, email address, etc.
2) Delete the entire string of messages you sent to that number. That's every single message...
3) Now delete the entire string of invalid 2114 messages you received after your text(s) failed.
4) Finaly, remove the contact from FAVORITES if you saved it that way.
5) To validate that all this worked, simply go to the keypad or contact screen and enter the number associated with the contact to verify successful removal. I used the keypad and dialed to confirm. If the contact number still shows up, you need to go back and recheck your steps. Trust me, I had to do this a few times.
Several posts suggested that you should reset and turn off your phone. After following these steps, it was not necessary for me to reset or turn off my device.
is there a much faster way to achieve the same results? Probably, but this was safe for an iPhone novice and may help you avoid inadvertently deleting other contacts or replacing factory settings that you need. -
Message sent using invalid number of digits. Please resend using 10 digit number or valid short code. Msg 2114
How can this be fixed? Most of my numbers are saved as 7 digitSo I THINK I've figured this out. Hopefully. I was getting the same problem when I was trying to text my boss and my dad. I went back to try to delete the contact and try again and I noticed that I had the little phone icon next to their numbers and not the messaging text bubble. But I'd also left their type of phone as "home" in the drop down menu. I edited that to mobile and boom, got the text messaging bubble. Tried texting them both, I could now send the message.
I think if the number is set to home the phone assumes it's a landline and doesn't even try to send. I think the people who have had success deleting and re-inserting the contact edited that piece of information without realizing it.
I really hope this solves your problem! -
Cisco SPA112:
Can I make dial plan that can use 6 digit numbers without having to dial the area code 00357 but also being able to dial 0030xxxxxxxxxx numbers?If you include a country number, you have to drop the initial 0 from the area code. eg +31 10 2345 6789 instead of +31 (0)10 2345 6789
-
An update from Apple appeared on my iPhone so I downloaded it, it was an IOS update. The screen said to swipe to open, then enter a 4 digit number, which I did then it went to a screen asking for my network info which I entered (except I guessed at the security as being "WPA2", I have not idea, I entered my password and now the only screen that will appear is one stating it is Joining my stated Network??? but nothing is happening and I can't use any of my iPhone features at all? Help
Go back to the previous page. If there's no available wireless networks listed except "Other" which is manually putting the wireless network information, see if you have "activate using cellular" or "connect to iTunes" option.
-
Seems I entered question in subject field? Here's the question:
iPhone 4S, the last two versions of IOS: I receive a text, in iMessage, reply, get error message instructing me to use valid 10 digit number. Only this person. I've deleted and re-entered her contact info - still cant send txt. What's up? ATT says they've never seen this. I have previously texted successfully with this person and she's changed nothing on her end.The fix for this problem is easy and is set out here: http://edctips.blogspot.com/2014/09/fixing-iphone-texting-problem.html
-
About a month ago I added a friends number without the area code. I was in an area that I couldn't send texts from. Two days ago he texted me and I tried to reply, but when I did I got the error message "Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code."
So, I put in the area code in front of the number and when I sent it, the phone dropped the area code and just sent it to the 7 digit number. I went ahead and deleted all of his contact information and text messages to him and re-entered the with the area code and saved him as a new contact. I tried to text the number and it still sent it to only the 7 digit number!!!
I have tried everything there is to try, but there seems to be a part of the phone that is remembering this number even after I've deleted it and everything associated with it.
Does anybody have a solution for this?? I have called Apple and they told me they have never heard of this problem before.The fix for this problem is easy and is set out here: http://edctips.blogspot.com/2014/09/fixing-iphone-texting-problem.html
-
Texting problem: Please re-send using a valid 10-digit number
I've been having problems texting ever since I've upgraded to the latest firmware. When I try to text a person from my contacts, I get a text right back from 1 (121)611-611 : Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code.
I KNOW my contacts have 10 digits. I've double and triple checked that. The only way I can text is by going into the text window, open a new text, enter the 10 digit number and then write the message. It goes through fine. It even converts the 10 digit number to my contacts name when I do it like that and it sends.
I also have this issue when I reply to texts! I try to reply but it doesn't go through.
Has anyone experienced this and/or know how to fix this? I've tried a Restore, but it keeps happening.I'm not sure about your issues with Safari and such.
On GSM-based phones, like the iPhone, you can store and use phone numbers in the international format. eg. +12025551212, +61411123456. That's with the + sign. The network should realise it is in the international format and handle it without a problem. Storing numbers this way allows people to travel to other countries and still make calls to people from the address book and not worry about the local international access code.
Usually SMS messages are received with this form. Try sending an SMS using a number in this form. -
tried all the method proposed for former similar questions. None works. Even more confused about whether it is the problem of AT&T or apple or both? How can I solve it. It's really annoying!
Are you in the US? If you are in the US, you don't need to call or text the full number unless it is a toll free number.
You can just use the 10 digit number XXX-XXX-XXXX
It seems the number is invalid so AT&T respond back saying that "at&t +1 (1) (216)116-11 error invalid number please resend using 10 digit mobile number"
If you are using the right number and you know for sure it is a working number, try delete the number in question that you try to text to like call history or text history of that number and just delete it. Do not delete the number in your contacts though. Delete history pertaining to it in calls and text.
Then try it again to text to the number. -
I get very small windows popping up on the screen on top of anything else I'm doing regardless of what apps I'm running or not running. If I R-click on the icon in the task bar, it's identified as "plugin-container.exe"
The window doesn't say why it's there, but only displays a 3 digit number (for example the on on the screen now says 587) and allows only the usual X to close, or an 'OK' button to close. But a short time later it pops up again.
I'm running Windows 7 64bit MS Security Essentials and Firefox, though it will pop up even if I just booted and haven't started Firefox yet.
It's really (really really) annoying. How can I fix it or disable it or whatever it takes to make it STOP.
Perhaps if I had some idea what it was I could attack it that way, but I haven't a clue. BTW, I've cleaned the registry, and done full scan's for virus and turned up nada.
Thanks.
D.As per the web site:
There will be no update to Waterfox 25.0 as a bug causes Adobe Flash to crash on 64-Bit Windows 7 systems. Bug here. Although Firefox 25.0.1 is now available and we could build it, there would be no point of releasing a new version of Waterfox for only two weeks.
I mostly only use Waterfox and had no problem in the past. I suspect a flash problem may be at the root of my problem however.
As stated, I've performed (full) virus scans with MS Security Essentials. Also with Housecall, and also with HiJackThis. No problems detected.
Screen shot of popup window attached. -
hello
I have problem with regist my visa and I cannot buy from store
the message came in the end of form is says
the phone number must be a 7-digit number
and I have writed but not accepted
iam from saudi arabia
my mobile is 966504850992
pls answer
thanks
dfr aldossaryWow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off. -
This question has not been asked before..
So are you saying that your Four Digit number code is Authenticated and it still is not being processed ?? And it keeps asking you to enter the code again and again??
-> Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
-> Delete cookies for a single site ---- Delete calcoastcu.org Cookies
* https://support.mozilla.com/en-US/kb/Deleting%20cookies#w_delete-cookies-for-a-single-site
-> click '''Firefox''' button and click '''Options''' -> Privacy -> History section -> '''Firefox will: select "Use Custom Settings for History"''' -> REMOVE Checkmark from '''Permanent Private Browsing mode''' -> place Checkmarks on:
1) Remember my Browsing History 2) Remember Download History 3) Remember Search and Form History 4) Accept Cookies from sites -> click Exceptions... button -> type the addresses of the websites from which you want to Allow Cookies to be stored e.g. '''calcoastcu.org''' etc. -> click '''Allow''' 4a) Accept Third-party Cookies -> '''Keep Until : select They Expire'''
-> REMOVE CHECKMARK from CLEAR HISTORY WHEN FIREFOX CLOSES
-> Click OK on Options window -> Restart Firefox
Check and tell if its working.
-> When you use '''Clear Recent History''' feature make sure NOT to select '''Cookies, Forms and Search History, Active Logins, Site Preferences'''
* https://support.mozilla.com/en-US/kb/Clear%20Recent%20History#w_what-things-are-included-in-my-history
-> If you use Privacy Cleanup softwares like CCleaner, DON'T SELECT FIREFOX IN ITS SETTINGS. These softwares can be responsible for Deleting your Firefox Settings. -
How to format 9 or 11 digit number with dashes
Windows Adobe Pro 9.
Someone please be kind and have mercy on me, I've researched this issue for 5 hours now and cannot resolve it on my own.
I have a text field where the user will enter either a 9 digit or 11 digit number separated with dashes. If the number entered is 9 digits, it should appear as
XX-XXXXXXX. If 11 digits, it should appear as XX-XXXXXXX-XX. If only 9 digits are entered, the -XX at the end must be omitted.
I found a javascript that showed how to allow a varying number of digits, and I also found one that showed how to cause the dash to be entered, but I'm not smart enough to know how to combine the two. I've only used one other javascript before (how to format the time 12:00 am, with a gigantic thanks to Mr. George Johnson), so I know that I must put the script in "Advanced > Document Processing > Document JavaScripts." I think then I would go into the text field format and select "custom," and enter a keystroke and format script???
Any help will be greatly appreciated.
thanks
aliceHi Mr. Johnson,
When I copied the first part of the code into the document-level javascript editor box and hit okay, it gives this message:
SyntaxError: return not in function
8: at line 9
and the cursor moves to the empty line after:
// Do nothing if field is blank
if (!s) return;
Is there something missing?
I really appreciate your help.
alice -
How to get the 4 digit number associated with a SAP icon ( ICON_MAIL )
Hi Friends,
Could anyone please tell me how to get the 4 digit number associated with a SAP icon ( ICON_MAIL ).
eg: - For ICON_GREEN_LIGHT the four digit id code is '@08@' (which you can get from ICON table )and the associated 4 digit number is'1003'.
Similarly I want to get the 4 digit number for ICON_MAIL(e-mail icon)
<b><REMOVED BY MODERATOR></b>
Ashiq
Message was edited by:
Alvaro Tejada GalindoYou can use this report...It's not mine...
REPORT zdummy_atg_2.
TABLES: ICON.
INCLUDE <ICON>.
FIELD-SYMBOLS: <F>.
SELECT * FROM ICON.
ASSIGN (ICON-NAME) TO <F>.
WRITE: /(5) <F>, 20 '@',21 ICON-ID+1(2),23 '@',ICON-OLENG,
ICON-BUTTON,ICON-STATUS,ICON-MESSAGE,ICON-FUNCTION,
ICON-NAME.
ENDSELECT.
Greetings,
Blag. -
my number is 070-xxxx-xxxx...and I cant log into get apps or anything tell i give a 7 digit number...which I dont have. Whats the work around as I have already added my adress, zip APO AP etc etc ????
kickingcloud007 wrote:
my number is 070-xxxx-xxxx...and I cant log into get apps or anything tell i give a 7 digit number...which I dont have. Whats the work around as I have already added my adress, zip APO AP etc etc ????
It sounds as if you are trying to use the US store. Use the Japan store or use the US store with a US based address, credit card and phone number.
Maybe you are looking for
-
I had a MobileMe account and when Apple switched to iCloud I now have two mail accounts: @mac and @me. Additionally my folders in iCloud no longer show up in my Mail program on my iMac. How do I return to one account and see my iCloud folders on my m
-
Exception in PreFlight for a PDF doc
Now I want to call it vb console app to get error, i have following code PDFApp = CreateObject("AcroExch.App") PDDoc = CreateObject("AcroExch.PDDoc") PDDoc.Open(fullPathPDF) pdfP
-
How to add a bar code to each page in dynamic pdf
I am using adobe livecycle to create dynamic form. I have a requirement where I need to add BarCode field to alternate pages in pdf document. The pages can grow dynamically when pdf loads.
-
I hope someone can help me understand this situation. Oracle 10.2.0.3 running on aix. Production environment and DEV environment both identically loaded with the same data, stats exported from PROD environment and loaded into DEV environment. SYSTEM
-
Export Keeping Multiple Folders Intact
I read one work around for this involving creating a temp collection, etc. Is there an easier way? I would like to export multiple folders keeping the folder structure intact. Tell me there's an easy way to do this.