To transport STANDARD TEXT for script

Hello Experts,
Can any one give clarification
'Hou to transport STANDARD TEXT for a script'.
Regards,
Kumar

Hi,
Use RSTXTRAN Standard Program..
Do Like this..
Goto se38 and enter program name as RSTXTRAN
and press F8..
and give Text-key Name as Standard Text Name
then Press F8..
And select Select check box.. and enter
and press on trsfr to corr button..
it asks transfee textxs to a correction..
press on yes button..
it will show request number or create your own request...
and after goto SE10 tcode and Transport it...
Message was edited by:
Vishnu Reddy

Similar Messages

Calling standard text to script

Hi,
I created standard text using so10. How can I call this text to my script program??
Is there any other way to acheive this??
Thanks,
Ravindra

Hi Ravindra,
By using INCLUDE command you can insert the standard text in script editor.
please go throught the help command for include command and it will explain you in detail.
One more thing regarding that,when you have to transport your request to QA system, you have to include the standard text in your request otherwise your standard text will not be visible in the QA.
To include your standard text to your request in DEU, run program RSTXTRAN.
Regards,
Tarun

Using Standard text in scripts

Hi all,
I had a problem while printing standard texts in scripts.
I Know how to print standard text if we have to print it from the begining of window using
INCLUDE &T024E-TXADR& OBJECT TEXT ID ADRS LANGUAGE &EKKO-SPRAS& PAR
But my problem id i have print it after a hard coded text like
Delivery schedule: 'here i have to print the standard text'.
can any one please help me out how to solve the problem
Thanks & regards
sreehari p

Hi,
Here's one my brother taught me - you can actually trick the system to accommodate this requirement.
Ensure that you use 2 different paragraph formats in your INCLUDE statement, using the PARAGRAPH and NEW_PARAGRAPH clauses, ie.
INCLUDE &T024E-TXADR& OBJECT TEXT ID ADRS LANGUAGE &EKKO-SPRAS& PARAGRAPH P1 NEW-PARAGRAPH P2
Paragraph P2 (which will be used as the first line) should be created as having a Line Spacing value of 1 TW (1 twip) which is less than 1/1000th of an inch. Also, set the Left Margin value to an offset which brings the text to the right of the Delivery schedule literal.
Paragraph P1 (which will be used for all subsequent lines) should be set up as normal - ie. use the same paragraph format as that for displaying your "Delivery schedule:" literal. If you need the text to be indented in line with the first line, then copy your existing paragraph to a new paragraph but set the Left Margin value to the same as that in P2.
What this does is to output the first line of text indented by the margin after skipping 1 twip, giving the illusion that it's actually on the same line. Since subsequent lines are output with a normal (or normal/indented) paragraph, that just follows with normal spacing on subsequent lines.
Hope this makes sense.
Regards, Andy

Regarding printing of standard text in scripts

Hi every one,
 I am Dinakar. I had a situation where i am printing the standard text for
 Terms & Conditions.
 my page is able to print only 15 terms pr page.
 but my problem is that few line from the last (15th) terms & condition r missing
 in the first page. from 16th terms & conditions r printing properly.but again from third page remaining terms and conditions r completely missing.
please help to complete this situation.
Thanks & Regards
Dinakar.

Hi Dinakar,
Try to keep the statments you want to display in a single page use PROTECT and ENDPROTECT.
/: PROTECT
p1 standard text1
p2 standard text2
p13: standard text15
/: ENDPROTECT
Thanks,
Sreekanth
*-- do not forget to reward if it helps you ;)

Location of standard text in scripts

hi,
        where will be the standard text in script?
regards,
bbr.

SO10 is the T-code.
You can call the FM Read_text.
you should pass the below values to FM
    id                            =
    language                      =
    name                          =
    object                        =
tables
    lines                         =.
Regards,
Rajasekhar Reddy.

How to Transport standard text in scpits from 1 client to other

HI I am veerendra,
Can you please tell me,
How to Transport standard text in scpits from 1 client to other
THanks,
Veerendra

Hi veerendara,
1. a little tricky
2. goto se09 and create a new
customizing rqeuest.
3. after that
in the object list,
go in edit mode
and a new window will come
where u can add the objects(in table control)
4. there u put
program id = R3TR
object type = TEXT
object name = TEXT,YHRS_FNF_LTR,YHR1,E
where
TEXT = TEXT
YHRS_FNF_LTR = name of standard text
YHR1 = TEXT ID
E = english language
regards,
amit m.

How to Transport Standard Text

Hi all,
I'd like to transport Standard text from one server to another.
Pls guide me.

Hi Ram,
Create a workbench request and change the task as development/correction.
Execute RSTXTRAN program and give the CR and the standard text with the language. Then the Standard text will be moved to the CR.
In Detail.....
When u created SAPScript Text in SO10 ,it won't ask any request or it won't saved under any request.
u have to save that SAPScript Text in a request..
steps to save SAPScript Text in a request...
->go to se38 -> RSTXTRAN -> Execute(F8)
-> again press F8(Execute)
-> Press Deselect all button
->in find (Ctrl+F) give ur SAPScript Text name
->check that
-> Press 'Enter'(on ur key board)
->Now click d button 'Trsfr texts to corr.' button
->now it will ask to assign request number
->( u can save any existing request or ur own request number)
but it stored as Customizing Request(every SAPScript Text is assigned to a request as like this only)...
check this
Re: RSTXTRAN...
Regards,
Priyanka.
null

Hi..how we enter standard text for smartform using include text

hi
guru
..how we enter standard text for smartform using include text..
i know only using so10 we write text..
in smartform it asking text-object
text-id,
so what values we should give to get text

Hi,
Do u want to print Standard Text or the Texts that are maintained at the Transaction level.
If it is standard text , then u use text id as ST or if it is Texts that are maintained at the Transaction level then u have to go to that specific transaction and check for that text , then go to text editor ,in the goto menu u have header data where u get the Text id , text name.... , use them in ur smartform in the INCLUDE text.
Further u have the option of text modules in smartforms which act as standard texts, so if u r going for creation of standard texts then its better to use text modules.
Regards,
Shafivullah Mohammad

Where can we find the standard program for scripts and smartform for vl02

where can we find the standard program for scripts and smartform for vl02
regard,
anil

If it is a standard Script Output see that all config in NACE tcode was done correctly and in the Application document the output type was properly defined and attached to a medium, partner and all communication related things like printer name, when to print the output and number of messages etc are entered in the document
the go to the related application Tcode
(for sales order goto VA02 or VA03)
(delivery -VL02N or VL03N)
for Invoice VF02 or VF03
for PO -goto ME9F
enter doc number, Issue Output to -> screen/printer
then see the output
step 1 : copy the z layout into testing client thru SCC1.
step2 : go to se71 and check modified layout.
step3 : if it is under logistics.. go to TCODE "NACE".
u will see various applictions for each business process.
there u have configure ur related layout according to requirments,
for example u consider for Request fo Quatation..
there is APPLICATION called "EA"
click and enter into it. configure it with ur requirments, for help consult with ur functonal consaltant, and save it.
step 4 : goto tcode ME9A for requst for quatation(RFQ).
step 5 : enter test data avalable and check it with message display.
it is same for other applications like Contract agreament --> ME9k
invoice --> vl02n
and goes on..
Reward points for useful Answers

Error while transporting standard text using RSTXTRAN

Hai Gurus
I am trying to transport the standard text that was created in Development to Quality with the script I am working. I tried to attach the SO to the task Request using RSTXTRAN and SO are selected.Finally when I am trying attach to the correction it throws up error like this "You cannot transport client-specific objects"...what should we do for this...
Thanks
Ganesh

Hi Gurus
The Message is "You cannot transport client-specific objects".
Diagnosis
The object 'R3TR' 'TEXT' 'TEXT,Z_2200_REMIT2,ST,E' is client-specific. The current client is set so that you cannot transport client-specific objects.
System Response
You cannot release the request.
Procedure
Delete the object from the request, or ask the system administrator to change the setting of this client.
Should this occur of Settings by the Basis Guy in this client
Thanks
Ganesh

Difference jb/w text symblosin script and standard text in scripts

hi to all
can u pols explain about the
difference b/w text symblos in script and standard text in scripts

hi
Default paragraph Paragraph set to * in standard text maintenance
If no form has been assigned to a text, the system automatically assigns the form SYSTEM, which contains minimal definitions for text formatting. There are two ways of formatting texts using forms: Use the standard text maintenance to enter and print the text.
Any kind of text can be included in a form. If no object is specified, then TEXT will be used (standard texts).

Text Symbols
Text symbols acquire their values as a result of explicit assignment. To interactively assign text symbols, in the text editor choose Include  Symbols  Text. This method is available for all text symbols belonging to a text module as well as those of the associated form. Values defined in this way are lost when the transaction is left. If you want to print the text module again, then you must enter the symbol values again. The purpose of the DEFINE command is to provide a means of making this value assignment a permanent part of the text, so that the values are available again when the text module is called again. This command can also be used to re-assign a new value to a text symbol half-way through the text. Syntax: /: DEFINE &symbol_name& = 'value'
/: DEFINE &subject& = 'Your letter of 7/3/95' The value assigned can have a maximal length of 60 characters. It may itself contain other symbols. A symbol contained within the value assigned to another symbol is not replaced with its own value at the point at which the DEFINE command is executed. Rather, this replacement is made when the symbol defined in the DEFINE command is called in the text.
/: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& = 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPscript If, however, the DEFINE command is written using the ':=' character rather than the '=' character, then any symbol contained within the value being assigned is replaced immediately with its current value. The assignment to the target symbol is made only after all symbols in the value string are replaced with their values. The total length of the value string may not exceed 80 characters. The target symbol must be a text symbol, as before.
/: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& := 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPmail
Inserting Text Symbols
Procedure
Inserting a Text Symbol
1. Choose Insert → Symbols → Text.
2. Place the cursor on the desired text symbol.
3. Choose Choose.
4. The system inserts the text symbol.
Editing the Value of a Text Symbol
1. Choose Insert → Symbols → Text.
2. Choose Edit value bearbeiten. The dialog window Value definition for symbol <text symbol> appears.
3. Enter the appropriate value definition.
4. Choose Continue. In the dialog window Text symbols the specified value appears after the name of the text symbol.
5. Choose Continue.
Deleting all Text Symbol Values
1. Choose Insert → Symbols → Text.
2. Choose Delete all values. The system deletes all defined values.
3. Choose Continue.
Using Formatting Options for Text Symbols
1. Choose Insert → Symbols → Text.
2. Choose Options. The dialog window Formatting options for <text symbol> appears.
3. Fill in the fields.
4. Choose Continue.
5. Choose Continue. The system executes the selected formatting option.
regards
ravish
plz reward points if helpful

Dynamic STANDARD TEXT in scripts

Hi friends,
         I have to include standard text in the script corresponding to the company code. For example if company code = 6100, I have to include standard text SD_6100, or else if 2000 I have to include SD_2000. Here I can use IF statement. But If company codes are 20 or 30 then it is difficult to write that many IF statements. And in future if they increased the company codes then we should write one more if statement.So is there any method to include the STANDARD TEXT dynamically.
Sathish Reddy.

Hi satish ,
create the standard text in tcode SO10 .
now u can create this with respect to company code
/: case & - bukrs&
/:    when '20'
    text
/:   when '30'
    text for 30
/:   endcase.
so by doing this u ll trigger the corresponding text for company code .
now to include the std text in your form
just call the standard text IN THAT WINDOW AS ...
/: INCLUDE Z_XXXXX OBJECT TEXT ID ST LANGUAGE EN
remarks,
Dynamically if u want to trigger the standard text u can go for IF end if logic as u stated or a case endcase..
there is no alternate .
regards,
VIjay
Message was edited by:
        Vijay k

Standard text in scripts

Once we create standard text using SO10 transaction, how to use it in the script, I mean, where should we write??

Hi,
You will have to use a INCLUDE statement for the same.
/: INCLUDE 'Z..' OBJECT TEXT PARAMETER...
Take a look at this thread ...
Re: Query Regarding INCLUDE statement in SAP Script
Regards,
Ravi
Note : Please mark the helpful answers

How to transport standard text in SO10 to different system.

Hi,
I need to change the standard text in SO10. I need to change the custom text. We have a custom text id (zval) associated with it. How to transport the changes i have done from Dev to Quality to Production.
I wanted one clarification: when we create the transport manually, whether only those changes what i have done for the text can be transported or it will include all the other text which are initially present (like table entries). From the program RSTXTRAN, can you give the what are the inputs need to given.
Please let me know regarding this. Thanks in advance

Steps..
Create a work bench CR in the transaction SE09..
Modify the task to Development correction / Repair..
Go to the program RSTXTRAN..
In the name of correction give the task number (Not the CR number)
Give the Text Key..Your standard text name..
Press F8...
Press select all..
Then Press enter..
Then press the button "Trsfr texts to corr".
Now the standard texts will be moved to a CR..
Then release the CR and move it to QA..

Transport STANDARD TEXT KEY from CA10

Hi ,
Is it possible to transport the STANDARD TEXT KEY created in CA10? Please give your suggestion on how it can be done or is it advisable to create entries in each client manually.
Thank you.

You can only transport the standard text key along with its short text, long text transportation is difficult as they are not stored in transparent tables.
Follow the steps:
1. Go to transaction SE10. Click on Create.
2. Following pop-up appears. Select Workbench request.
3. Now double-click on the request
4. give the following details:
Prog ID: R3TR
Object type: TABU
Object Name: T435T
5. Now click on the key button available under the name u201CFunctionu201D
6. Following screen appears. Double-click on the first empty line.
7. Here we can provide the entries that we would need to transport.
Client: Client name
Language:*
Std text key: *
8. Now you can check for the entries that would be transported as per the given condition, by clicking on the table button
Select the third radio button u201CTable contents specified by current keyu201D.
9. Click on Save. A warning message would appear.
Ignore the warning message and click on Save. Now transport this request to transport the data to any other system.

To transport STANDARD TEXT for script

Similar Messages

Maybe you are looking for