To update security is this number the same as my sign in code
Security updates protocol do you use same code as signing into start up screen
Thank you so much I appreciate your help most grateful
Similar Messages
-
Is there any way to reset my iphone i did the latest update and now i cant download any new apps? I tried to do the general reset but it keeps telling me that my passcode is not correct. This is the same passcode that I use to unlock my phine though to get in to it.
press and hold both the power and home buttons until the apple logo appears and then let them go. Wait till the phone restarts and then try
-
I updated my spouses phone using the same apple id. I must have clicked ok to something i shouldnt have at some point.....because now he is recieving my texts! I still recieve my texts, but he also recieves them.
I went to restore his phone but it said it would only restore to factory settings and i dont want to loose the data.
How do i solve this?Try settings, messages, tap on send & receive, there should be phone number options to choose from...uncheck your phone number.
This is an added feature to allow a user to see messages across multiple platforms like your iPad and iPhone. -
Nsert/Update and Add Column at the same Table and at the "same" Time
Hello,
I want Insert/Update and Add Column at the same Table and at the "same" Time but in different sessions.
Example:
At first the "insert/update" statement:
Insert into TestTable (Testid,Value) values (1,5105);
After that the "add" statement:
Alter table TestTable add TestColumn number;
- sadly now I get the message: ORA-00054: resource busy and acquire with NOWAIT specified
"insert/update" statement:
Insert into TestTable (Testid,Value) values (2,1135);
After that the execute commit.
I don't know when the first session set the commit statement so I want that the DB the "Alter Table..." statement execute if it's possible.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.
Thanks for ideasWell I want to walk in the rain without and umbrella and still stay dry, but it ain't gonna happen.
You can't run a DDL statement against a table with transactions pending. Session 2 has to wait until session commits or rollbacks (or until the session is killed). That's just the way it is.
This makes sense if you think about it. The data dictionary has to be consistent across all sessions. If session 2 was allowed to change the table structure whilst session 1 has a pending transaction then the database is in an inconsistent state. This is easier to see if you consider the reverse situation - the ALTER TABLE statement run by session 2 does a DROP COLUMN TESTID rather than adding a column: now what should happen to session 1's INSERT statement? You have retrospectively invalidated a statement that was perfectly legal when it was executed.
If it's possible I want to save a repeat loop with the "Alter Table..." statemtent.Fnord.
Cheers, APC -
After upgrading to ios6 my iphone will not open .xls files in emails with the default viewer. Is there a fix for this? The same emailed .xls files still open on my ipad using ios5 while viewing email like they did on my iphone prior to upgrading. I have no special software like numbers or anything else installed on either device. Just using the default viewer provided by apple for viewing email.
The attachment is an .xls excel 97-2003 spreadsheet. I viewed the file in the email and did not edit it with any software. I can forward the file to anyone that is may want to check it out to see if they can help me. I was wondering if there was some way of forcing another ios6 install on my phone and maybe that would solve it.
Is there anyone out there that is viewing .xls files in email using ios6 w/o any other software installed like numbers or any other add ons? I am not upgrading my ipad from ios5 to ios6 so I can still continue to view the emails on my ipad. Is there an email viewer .xls plug-in that will be availablle in the next ios6 update? -
Mac App Store updates are looping (stuck in the same updates)
I've been using Mac OS X Mavericks since last year and didn't had any issues with App Store before. However, since last month, I've been trying to install some application updates (TextWrangler, iBooks Author,...) and it seems to be looping. The updates are shown in "Updates Installed in the Last 30 Days" but they are always reapearing in the Available Updates windows, as you can see in the attached picture. Has anyone seen this behaviour before ? Do you have any idea how to solve this problem? Also, I've tried to remove two of those applications (123Make and iBoostUp) but the Updates continue to appear in the same window.
Thanks.A Fix For: App Store Keeps Wanting To Update Apps
-
hi, for the last week everytime i open firefox i get a message to download 36.0.4. I update firefox, restart an then the same message appears. What's going on? What can I do?
There is a new update available today for version 37, please do post back if this also happens for this update.
Please update to the most recent version of Firefox:
*[[Update Firefox to the latest version]] -
the latest itunes update on my vista laptop brings up R6034 runtime error - after rebooting - uninstalling - reinstalling i have NO itunes access. please correct in your updates. there are others with the same error message thank you!!
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
The Ap store on my iPad shows threr is an application update ready. However thhere is no update. My wife has the same issue on her iPad. What needs to be done?
There are countless posts about this. There's a problem at Apple's end and has been so for several days.
However, I have no trouble updating using itunes on my computer and later syncing to my device. -
Crackling audio (not sure if this is the "same" problem)
I have been experiencing crackling audio under certain circumstances with my Soundblaster X-Fi XtremeMusic. I am no audio expert, but it seems to me that the problem occurs when multiple?"types" of audio are played at the same time. For example, in a game, when voices are played over pre-existing background music, the audio on the voices will get crackly and staticky. This is recreatable in GTA4; that game uses a third-party interface (Microsoft Li've) to track game progress and post updates inside of the game. The game's internal audio is fine, but any sounds "inserted" into the game by Microsoft Li've will be all crackly because they seem to be "competing" with the existing sound effects from the game. It gets really annoying at times.
The "trigger" for this issue?was when I upgraded to a newer NVidia driver for my 7950GX2 graphics card. My sound was fine for years until I updated the driver to 72.xx and newer. However, I am not just talking about the newest driver. This has been happening since June and continues to happen with every NVidia release since then. This happens with every driver beyond 72.xx and now I am using 80.xx. Reverting drivers back to pre June 2008 is most definitely not an option, because I play current games and I update NVidia drivers on a weekly basis as new ones are released.
When the new X-Fi driver came out, I thought finally this problem would be resolved. However, the new driver did nothing to resolve the problem at all. I have tried all versions of the X-Fi driver from 2004 to the present. Nothing fixes the problem.
Suggestions are welcome... :smileyindifferent:FRe: Crackling audio (not sure if this is the "same" problem)? Hi, I used to post in these forums a couple of years ago, after an Audigy 4 literally corrupted my hard disk and nearly killed my motherboard's SATA controller.
Anyway, after a lot of debate etc. it turned out that post-Audigy Sound Blasters, including X-Fis, are extremely sensiti've to PCI timing issues and have horrible bus mastering themselves, something which was NEVER quite fixed and keeps popping up time and again. In the best of cases you will get static, in the worse cases you will get BSODs, corrupted data, or even actual damage to the hardware. Not much you can do, really, than putting up with it, like many other users before you did.
P.S.: I'm sure that shortly after this post, a certain user will chime in and start raving about how most chipsets and RAM modules are garbage, and how he uses a super-duper "golden pick" reliable system with a chipset that does everything "nice and slow" and super-reliably and ofc works wonders with ANY "problematic" CL card to date,? and how it's not really CL's fault but that of the garbage mobos, chipsets, ram etc. -
Keeping one number the same in a function
How can I keep one number the same in a function? I want to do something like =(E4/E2) and keep the "E2" the same as I drag the function down the row.
ThanksKerwin,
To change the cell reference to Absolute, use the $-sign character when entering it from the keyboard, or use the drop-down menu in the Formula Bar presentation to select Absolute. You must choose absolute for Row, Column, or both.
In this case, you would have: =(E4/$E$2).
Jerry -
Clicked on Mac when ordering, paid for it but it says "Windows " on the download page. Is this still the same for mac?
Hi Richard,
We are sorry for the trouble,
I have sent you an email with the correct serial number.
Please reply once you get it.
Thanks
Sandeep -
Is the serial number the same..
Is the serial number the same on all creative Rhomba 256MB mp3 players? Or is this individual for all Rhomba players?:smileyindifferent:
Martemarte,
The serial number is different for all of the Rhomba players. It should be found on the back of the player on a sticker.
Jeremy -
Remote and direct update of master data at the same time
Hello
Is it possible to do remote and direct update of master data at the same time? If yes where it could be used?
ThanksHi,
What do you mean by Remote Update ?
regards
Happy Tony -
Seems to me this is a bunch of self serving crap. I have many small cameras that don't do this, in the same specs.
gdgmacguy,,
Let me help you a bit with the english: "As a fellow user here I can tell you that no one cares what you are saying".
Please let me know if the translation is not correct.
The camera *****. I'm not holding it wrong.
Maybe you are looking for
-
Hi, We are implementing COPA in an up and running application. As you are aware two accounting documents are posted during billing process. First document posts revenue and cost based on the sales order conditions to PA. There is another document is
-
Problem with new adobe PDF download
downloaded new firefox month or so ago with all the other adobe downloads. Had a prob with the Adobe Acrobat PDF plug in. I could not open any of my Pdf files on my comp, they would flash open then close in a second, tried everything I could think of
-
Hi Friends, We maintain output in CMR...my question is how the output maintained in CMR is copied to the documents(sales,delivery&billing) is thr any settings required to make this output flow across the subsequent document for a particular customer?
-
Adobe XI processes left open with no threads to a valid process
Processes are being left open after attempts to generate PDF's. The system is using the latest update for Acrobat XI. This was not an issue with this version before about February, January for sure. Windows 7 Professional 16G memory XEON processor D
-
Time format hours ("hh24") delim (.or,) (1/4) hour values as decimal value
Dear all, What I need is a client (browser) site validation of values for a time recording system. The format should be as <hh24><Delimiter>(.(or),) 1/4 hours as decimal value (e.g. 15 minutes = 0.25). So as a result valid entrys should be. 00.00 as