To upgrade from FF 4.0b12 to 4.0RC do you have to download RC and disable b12 version or is the process automatic?

When I gave FF 4.0 b12 a trial, I had to disable the 3.6 version off the desktop of my HP G72 laptop.
I see the release candidate is ready but do I need to download the FF 4.0 RC and disable the 4.0 b12 as I did with 3.6 or is the update process for the b12 to RC and even full release version will be automatic?
I like the 4.0b12 and it has been informative watching and participating in the development of the release version.
One other note: I am still not able to get the mobile version to flip over into landscape view on my Droid X. Will this be addressed eventually?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. The latest version that runs on OS X 10.4.11 is Firefox 3.6, you can get it from http://www.mozilla.com/en-US/firefox/all-older.html

Similar Messages

Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????

Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????

My existing movies are all the following types straight from FinalCut
Apple Intermediate Codec, 1920 × 1080, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
This particular movie is 6.66 Gb
The new Quicktime player in OS Mavericks converts these to the following format:
Apple ProRes 422, 1920 x 1080
Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
And a movie size of 6.48 Gb
Please, please can someone tell me why?

Since the upgrade to FF 5 on OSX 10.6.8 I have no 'Downloads' window and no 'View Source' window.

Firefox appears to function normally except for the 'Downloads' window and 'View Source' window not being accessible. However, when selected they appear as being active in the 'Windows' menu but cannot be seen on screen.

Hi,
I have been through the entire sequence at -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
But still have the same issues. No windows for Downloads or View Source.

Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

Have you printed to this printer from 10.10 before? If so, check your connections.

After upgrading from 8 to 9.0.1 I no longer have any search engines installed. I would like to install Google as my default search engine. When I click on "get more search engines" I cannot find Google or Bing or -

Problem with search
After upgrading from 8 to 9.0.1 I no longer have any search engines installed. I would like to install Google as my default search engine. When I click on “get more search engines” I cannot find Google or Bing or …

I resolved my issue. Renamed search.sqlite and reinstalled Firefox 9.0.1
All default search engines are now available.

I upgraded from 10.4.11 to 10.5.0 using a drop in DVD and now I can't log in...

I upgraded from 10.4.11 to 10.5.0 using a drop in DVD and now I can't log in...
This was on a G5 imac. I tried booting to the DVD and resetting the password but this did not help.
I did see the 2 user accounts still there when I reset the password so that gives me hope that my data is all there intact.
I need help getting past this login screen PLEASE!
The login name is blank and I've tried everything to get past it.
I heard from a tech that there was a problem when upgrading from 10.4.11 to 10.5.0 instead of the 10.5.3 or whatever, and it was a known issue when using the 10.5.0 disc to upgrade and he said that there was information on apple's site on what to do when this happens but I have not come accross this info as of yet.
I would really appreciate any help anyone can give me.
Thanks!!!
Tim

OK I finally got passed the above problem by just trying to type it in over and over and over and it finally took!
It seems as though I may have typed it wrong or misspelled something but I could swear I put it in the same way everytime!
NOW...
when I type : passwd username
replacing username with the short name it says
paddwd: Unknown user name 'username'
someone told me that possibly the home folder is still there and intact but the login may have gotten trashed and that i may need to recreate the user login. Does that sound like a possibility?

I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

There has never been a reliable firewire ---> USB adapter suitable for external high speed storage. This was a major issue when the MacBooks lost the firewire port a number of years ago (Apple subsequently brought it back).
The only high speed port on the Air is the ThunderBolt port. There are external ThunderBolt drive options out there, but they're somewhat more expensive than traditional USB/FireWire options.

After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?

After upgrading from acrobat 9.5 to XI pro my users have complained on slow typing when filling in form that were created in version 9.5?
The issue is they type but there is 2 second delay when it appears in the field.
Windows 7 64bit

I see, I misread your reference to Reader 11 to mean you were using Acrobat 11, but it looks like it worked out anyway.
The base-14 fonts are special in PDF because they are guaranteed to be available even if they are not embedded. If you select a non-base-14 font for use with a form field, the entire font usually gets embedded, since each glyph it contains has to be available for use with the field. This can take up a lot of space if you do this a lot, and the space isn't reduced if you change back to a base-14 font later because the internal reference to it is not removed. This is caused by the bug I mentioned.
In your case, however, the entire font doesn't get embedded because fonts like it (e.g., large asian fonts with a lot of glyphs, Arial Unicode) would take up too much space if fully embedded. If it did, a 100KB PDF could bloat to 20MB with that one change. Instead, users are expected to have such fonts installed on their system, which is why you were prompted to install the font pack. This despite the fact that the font was not actually used by anything in your document, it was simply the orphaned reference to it that triggered this. This should get fixed in Acrobat eventually so this type of thing doesn't happen again.

I have lost nearly all my photos and events. I received a message effectively saying that I need to upgrade from an old base. I think I may have tried to open an event that was stored in iPhoto Buddy a few days ago.

I have lost nearly all my photos and events. I received a message effectively saying that I need to upgrade from an old base. I think I may have tried to open an event that was stored in iPhoto Buddy a few days ago. iPhoto Buddy is not supported in Lion. How can I retrieve my phjotos?

What version of iPhoto?
Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money for that

Hi All
Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money to SAP for that.

hi,
asking or teling ?
I think you need not as long as you are with official support . However please contact sap official support in you region

I need to upgrade from 10.5.8 to 10.6.6 before I can download Mountain Lion. Where do I find this download?

I need to upgrade from 10.5.8 to 10.6.6 before I can download MOUNTAIN LION OSX. I am having trouble finding this download for 10.6.6.

10.7/10.8 will NOT run your older PPC or most Intel software, you going to have to spend money on a older machine that might not be worth it.
http://roaringapps.com/apps:table
Also 10.7/10.8 is slower and has more memory needs you machine might not be able to handle (4GB+) also your older CPU and graphics card.
If you want fast, OS X 10.6.8 is simply the fastest with a fresh install, even faster than 10.5. AND it runs your older software, no need to purchase new ones.
Run 10.6 until the wheels fall off that machine before you inflicted yourself with a backwards crap of the Lions.
For Snow Leopard Speed Freaks
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Sudo upgrade from 1.8.5p2 to 1.8.6p8 will have any affect on oracle rac 11.2.0.3 servers running on the same?

sudo upgrade from 1.8.5p2 to 1.8.6p8 will have any affect on oracle rac 11.2.0.3 servers running on the same?

564b2558-b4a1-43c9-99b6-cfedc0ec44fb wrote:
Thanks for the information.
It means will not have any impact of upgrading the following in oracle 2nodes 11gR2 environment running on AIX.
SUDO: 1.8.5p2 to 1.8.6p8
SSH: 5.8.0.6102 to 6.0.0.6102
SSL: 0.9.8.1801 to 0.9.8.2500
So we need to bring down the servers and reboot the same once upgraded the above mentioned secured packages.
Will not have any problems of logging and Db will be in normal as earlier before upgrade and capable of using the secured packages as well, Please confirm on this?
I confirm

I am using PSE 9. I had no problem opening my Raw files from my Canon Rebel XT Now I have a Rebel 5ti and pse 9 won't reconize the Cr2 files

I am using PSE 9. I had no problem opening my Raw files from my Canon Rebel XT Now I have a Rebel 5ti and pse 9 won't reconize the Cr2 files

See this faq:
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
That will explain why each new camera model uses its own raw format. (.CR2 does not indicate a format, only a Canon family of formats).
The first link tells you what version of camera raw is needed for your camera : https://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
You need ACR 7.4
The second link tells you which ACR versions are supported by Elements versions Camera Raw-compatible Adobe applications
PSE9 supports version 6.5
Further down on that paper, you get links to download the free Adobe DNGconverter for Mac or Win.
This standalone software can batch convert a whole folder of raw files to the DNG raw file format that your present PSE9 can read.
Otherwise, you would have to upgrade to version 10 or later.

After I upgraded my iPad 2 to 6.1.3 I now have a itunes logo and USB cable showing. What has happened?

After I upgraded my iPad 2 to 6.1.3 I now have a itunes logo and USB cable showing. What has happened? What do I do to get by this. I can not shut the iPad down at all.

Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I have an iPhone 5s and an iPad 2 both using the same Apple ID how can I FaceTime the iPad from the iPhone?

I have an iPhone 5s and an iPad 2 both using the same Apple ID sometime I'd like to FaceTime the iPad from the iPhone to talk to my wife while at work how can I get it to do this it always says unavailable.

Naw I figure it out without all that had to go into the FaceTime settings and only use the phone number on the iphone and only use the Apple ID on the iPad works great now no need for two Apple ID or any signing in and out.
Thanks for your help though

To upgrade from FF 4.0b12 to 4.0RC do you have to download RC and disable b12 version or is the process automatic?

Similar Messages

Maybe you are looking for