To upload the time data from a remote server into R/3 2011 infotype

hi all,
i have been given a task to upload the time data of the employees into the 2011 infotype from a remote time recording server, can this problem be solved with the help of a rfc which will run on that remote server, please guide me how to approach this problem.
thanks & regards,
santosh.

Hi Santosh,
You can use ALE for this. The message type is HRSM_D for upload of time data.
Reward if useful.
Regards,
Senthil

Similar Messages

How to upload the master data from legacy to SAP

Hi Frends,
how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
please clarify me
Regards
Sap Guru

Hi ,
use LSMW or BDC for uploading Master & transaction data.
This work is done by the Respective Functional team.
Chandra

How can we upload the Time data into SAP system

Dear all,
ingeneral which method we can use to read the Time data and how can we upload that data into SAP system. Please any one can answer this asap.

In the recent project that I have done.. the time data is uploaded from the external time recording machine.. in the form a file...
The other way is through CATS... which in turn will populate the time entries as per hte work schedules... and will explicitly have to populate the deviations to the work scheudle by going through transactions..
Please reward the points if it is helpful...
Regards,
Suvan,
Yash Technologies Pvt Ltd, Hyderabad.
Message was edited by:
Suvan

Uploading the Master data From SCAT

Hi Experts ,
Can any one explain how to upload the mater data by using SCAT(In Step Wise).

SCAT (CATT)

Taking time data from external system(KRONOS) into SAP

Dear Friends,
I have to intergrate my time managemnt to time recording machine(KRONOS) am not aware about that it's sap certified or not .How we can access the data from that machine and insert in sap tables that means we have to communicate sap to non sap system.I don't have to use the BDC because i have to update our table according to machine shall i go for IDOC and EDI.In that case which IDOC or EDI i have to use .I have to create the INBOUND interface for that .Kindly help me am stuck
thanks
sandeep dabral

Hi Sandeep,
You require a abap guy along with a basis person. Below steps are required.
Step 1: The third party ll specify the file format in which they are going to send the data.
Step 2. You need to check with the basis or a third tool to upload the file into SAP application directory tcode al11.
step 3: Then the ABAP guy will write a interface program using this BAPIs to upload the data in to catsdb.
Step 4. Then functional testing and bug fixing and finially sheduling the inteface job in Production.
Br/Manas

Can i save data from a remote server to a client computer?

written a vi which is used to collect data and store it in a file.data colection is done on a remote system.i am able to control the front pannel frm the client using front panel control in labview 6.1 using web browser.
how can i view this data once the experiment is over.(ie the file in server)
the client and server are on WAN.
should i write it to a FTP server.
how should i go abt it,

Hi,
The easiest way is to save file into shared directory on remote PC. Then you can read this file with reading functions from "File I/O" palette. In this case you should specify path to the file for example as (in windows):
\\LocalNameOfRemotePC\C\Documents and Settings\Sithara\My Documents\sharedDir\myfile.txt
first you write the name of remote PC in local net, then disk name, and path to the file.
Good luck.
Oleg Chutko.

Updating all the changed data from Vo based table into database

hi,
there is a advanced table in my page and there r 14columns in it. the data for this columns is coming from 8 different tables. here the table is VO(sql query) based table.there is also a apply button on the page. when i click "apply" which is submit button, i want all the changes made on the advanced table to be captured and get updated on the respective columns in the database..
can anyone helpme out in doing this.
Thanks
Chandu

SQL query based VO is not updatable. You have to base your ViewObject for all EntityObjects which represent your 8 different tables.
Its good practice to base all your VO on EO, even for read-only, unless your query does not contain, distinct, union & group by clause.
Setting "updatable=false" property of EO make behavior of read-only.
Is your VO based on EO?
See this- http://howtolearnadf.blogspot.com/2012/04/how-to-create-oracle-adf-view-object.html
http://weblog.singhpora.com/2010/02/read-only-view-object-also-be-based-on.html

WLST: How to get "Activation Time" data from a managed server ?

Hello,
does someone knows how to get the "Activation Time" (Time when the managed server was started) of a managed server via WLST under WLS 8.1 & 9.2 ?
Thx a million.

Under 9.2
connect()
serverRuntime()
print cmo.getActivationTime()
print java.util.Date(cmo.getActivationTime())
<Markus Jessl> wrote in message news:[email protected]..
Hello,
does someone knows how to get the "Activation Time" (Time when the managed
server was started) of a managed server via WLST under WLS 8.1 & 9.2 ?
Thx a million.

How to get the forecast data from SCM into BW

Hello,
Is there a table or Function module in SCM F&R that can be used to transfer the forecast data from SCM F&R into BW? I dont see any Business content datasources that has the forecast data.
I would like to get the future forecast data. For ex, if there is a forecast for a material and Site for the next 52 weeks, I would like to retrieve
the same from SCM. I dont see any business content. The closest would be 0FRE_ANA_WEEKLY_1. But it has only the past data, not the future data.
Thanks,
SBS.

Hi,
You would follow the same process as you would for getting data from a R3 system to BW, i.e generate datsources on the APO side and then set the extraction to flow from APO to BW. On the BW side, you'll need a source system for the APO, replicate datsources, set up update and transfer rules in the infosource and then load data to the data targets.
Cheers,
Kedar

How to - Extract data from Cloud For Customer into SAP HANA system

Hello Community,
I have a requirement for extracting the existing data from Cloud for Customer into separate SAP HANA Box.
Is it possible to achieve the same ? If yes, Please guide me for the same.
Awaiting quick response.
Regards
Kumar

Hi Kumar,
In addition to what Thierry mentioned you could also use the C4C integration via standard Operational Data Provisioning (ODP) interfaces. This integration was acutally built for SAP BW and allows you to access any C4C data sources. From my perspective you can also build upon that for a native SAP HANA integration. Please also have a look at this guide: How To... load SAP Business Suite data into SAP... | SAP HANA.
Besides that question let me also add the following: SAP Cloud for Customer already runs on SAP HANA since Nov. 2013. You may also use the powerful built-in analytics within C4C for analyzing data and any of your reporting demands. If your report should consider external data as well, you can combined the existing C4C data source with an external, so-called Cloud Data Source. More infomation is published in the C4C Analytics Guide: http://help.sap.com/saphelp_sapcloudforcustomer/en/PDF/EN-3.pdf.
I hope this helps...
Best regards,
Sven

Can I access the data on the time capsule from the Internet?

Can I access the data on the time capsule from the Internet?

You need to follow the BTMM via icloud instructions.
http://www.apple.com/support/icloud/back-to-my-mac/
There are plenty of other ways to do it.. but issues to do with Apple not using a dynamic DNS client so if your ISP does not allocate you a static public IP there is no way to find it, if the public ip rotates as they are designed to do hourly or daily.
Do a google search, remote access time capsule..
Or use the more like this on the right hand side... there are plenty of posts and even youtube video which go right through it.
BTW your school system may simply block the port.. if I was a school IT admin.. I would. You are dragging files across to the internal school network bypassing the firewall.. that is unacceptable risk to the whole school system.

Uploading the data from a flat file into ztable

Hi,
I have a requirement where I have to upload the data from 2 flat files into 2 z tables(ZRB_HDR,ZRB_ITM).From the 1st flat file only data for few fields have to be uploaded into ztable(ZRB_HRD) .Fromthe 2nd flat file data for all the fields have to me uploaded into ztable(ZRB_ITM). How can I do this?
Regards,
Hema

hi,
declare two internal table with structur of your tables.
your flat files should be .txt files.
now make use of GUI_UPLOAD function module to upload your flatfile into internal tables.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename            = 'c:\file1.txt'
      has_field_separator = 'X'
    TABLES
      data_tab            = itab1
    EXCEPTIONS
      OTHERS              = 1.
use this function twice for two tables.
then loop them individually and make use of insert command.

Does anyone know of a VI or how to go about writing one that will prevent the computers time/date from being disabled while an application is running.

Does anyone know of a VI or how to go about writing one that will prevent the computers clock/time from being disabled while an application is running. The time and date can normally be reset while an application is running by clicking on the time/date in the lower right-hand corner of the computer screen. I have an application that runs over several days and it is critical that the time and date of the computer not be changed. Is there an easy way to lock this out from the user? Note that I am what I consider an advanced beginner in LV.
Thank you,
Chuck
Solved!
Go to Solution.

That is not something you can do from LabVIEW, as it is an operating system operation, and it will depend on the operating system that you're using. On Windows you can use a group policy to control this. Please Google on "prevent time and date change in windows".
Also, please try to refrain from stuffing your entire message in the subject block. Keep the subject short, but descriptive enough so it can be understood what you are basically asking. Thanks.

I keep losing the time date stamp when uploading the video and need to keep it HELP

Using Premier 7 making a video for my son and need to keep the time/date stamp that is visible when playing the video direct from the camera to the tv. When I compile the video and burn to DVD this Stamp disappears how do keep it on the film that I am editing so when I burn it will be still there?

Ah, PrElements 7. I thought that you had Pr 7.0, which was also named PrPro 1.0.
The forum that you want is HERE.
Now, in PrE's forum, look for the FAQ section, to the right of the main page. Steve Grisetti has done a few FAQ's on HDD cameras, and their MPEG files.
As for your Date/Time stamp, I am not sure if any of the DVDate programs will work directly with that. There are a few threads, but I do not recall the solutions. Do a search of that forum and you will get some info.
Back in later versions of PrPro, I have some tips on TimeCode, but that is different than what you want.
I also do not know if something like SceneAlyzer Live can Capture what you want.
Still, others have asked in the PrE forum, so there might be some solutions.
See you there,
Hunt

HT201328 Can I unlock an old, unused iPhone 3GS (to be used overseas with a local simcard) and upload on it data from a newer iPhone 4 on the same MacBook Pro?

Can I unlock an old, unused iPhone 3GS (to be used overseas with a local simcard) and upload on it data from a newer iPhone 4 on the same MacBook Pro?

I got approval to unlock my 3GS from AT&T and in the process of updating the operating system. I am now using a iPhone 4 on my computer. I just want to know the following:
When I backup and restore the 3GS in order to unlock it, will it mess up my existing data backed up from my iPhone 4?
Can I upload data from my newer iPhone 4 onto my 3GS?

To upload the time data from a remote server into R/3 2011 infotype

Similar Messages

Maybe you are looking for