To-view-id and parameter

Is there is any way to add parameters in a <to-view-id> tag?
eg: <to-view-id>/Customer.jsf?mode=c</to-view-id>

This is not supported presently.
-Jayashri

Similar Messages

Crystal Reports Viewer 2008 and parameter fields

Hello,
I saw this product on the main Crystal Reports site this afternoon and decided to download it to try it out. I have a number of users who would benefit from being able to preview their report results prior to actually running the report. This seems like the perfect product. I have a large number of Crystal Reports which were created in Crystal version XI. I also downloaded the free 30 day version of Crystal Reports 2008 yesterday to see what new features are there.
While testing Crystal Reports Viewer, I tried to run one of my reports which needs a parameter to run properly (account number). This type of parameter is needed for probably 98% of this business' reports.
The problem: Crystal Reports Viewer does not prompt me to input the parameter. In my actual Crystal Report, I had the box "Save Data with Report' left unchecked, as the account number frequently changes. However, if that box is left unchecked, Crystal Reports Viewer will give me the error message "No Saved Data. This report file does not contain saved data and cannot be viewed. To get data into the report, please open and re-save it in the Crystal Reports designer application with the "Save Data with Report" option selected."
Thinking that possibly it was the version of Crystal Reports in which the report was created (XI), I downloaded the free trial of Crystal 2008 and created a very simple test report with one parameter for account number where the account number is retrieved from our database. And I am having the same trouble.
The "Help" section of Crystal Reports Viewer tells me that I can select my parameters in the parameter panel. I do not see anything in my parameter panel other than the words "Current Data Set Last refreshed: 04/12/10 2:58 PM". The help tells me that I can "select the parameter directly in this panel by entering a new value", but there is no option to do so.
Any help would be appreciated.
thanks,
Noel

What I've learned is that I was originally using Crystal Viewer XI and upon opening it I received a message indicating there was an update.
I ran the update which put me on Crystal Viewer 2008.
Since then I have not been able to refresh my screen to bring up the parameters.
See the attached forum for another post concerning this same issue.
Paramter Prompts in Crystal Viewer

Remove group tree and parameter button from crystal view in iView

Hi
I have a crystal report which renders in an iView on the SAP portal. When a user views the report, in the viewer I see the group tree button and the parameter button. Is there a way to disable the group tree button and parameter button ?
Thanks,
Daniel

Hi Udi,
I have a page within it I have a Composite view (SearchPage) and an iview (MyIview1). I have passed a URL to the iview (MyIview1).
In searchpage i have a variable @Address which is selected from a dropdown box. On click of a button i need to pass the variable @Address to the iview (MyIview1). which should be appended to the URL that i pass to MyIview1.
If i use URL action it opens as popup, and shows the desired result. But, I want it to open within the iview (myiview1).
Please let me know how else do i pass the variable from composite view to the url iview within the same page as ="www.abcd.com?address="&@Address does not open the url in the iview.
Thanks and Regards... Vibha

How to create dynamic View Object and Dynamic Table

Dear ll
I want to create a dynamic view object and display the output in a dynamic table on the page.
I am using Jdeveloper 12c "Studio Edition Version 12.1.2.0.0"
This what I did:
1- I created a read only view object with this query "Select sysdate from dual"
2- I added this View object to the application module
3- I created a new method that change the query of this View object at runtime
    public void changeVoQuery(String dbViewName) {
        String sqlstm = "Select * From " + dbViewName;
        ViewObject dynamicVo = this.findViewObject("DynamicVo");
        if (dynamicVo != null) {
            dynamicVo.remove();
        dynamicVo = this.createViewObjectFromQueryStmt("DynamicVo", sqlstm);
        dynamicVo.executeQuery();
4- I run the application module for testing the method and I passed "Scott.Emp" as a parameter and the result was Success
5- Now I want to show the result of the view on the page, so I draged and dropped the method from the data control as a parameter form
6- I dragged and dropped the view Object "DynamicVo" as a table and I choose "generate Column Dynamically at runtime". This is the page source
<af:panelHeader text="#{viewcontrollerBundle.SELECT_DOCUMTN_TYPE}" id="ph1">
        <af:panelFormLayout id="pfl1">
            <af:inputText value="#{bindings.dbViewName.inputValue}" label="#{bindings.dbViewName.hints.label}"
                          required="#{bindings.dbViewName.hints.mandatory}"
                          columns="#{bindings.dbViewName.hints.displayWidth}"
                          maximumLength="#{bindings.dbViewName.hints.precision}"
                          shortDesc="#{bindings.dbViewName.hints.tooltip}" id="it1">
                <f:validator binding="#{bindings.dbViewName.validator}"/>
            </af:inputText>
            <af:button actionListener="#{bindings.changeVoQuery.execute}" text="changeVoQuery"
                       disabled="#{!bindings.changeVoQuery.enabled}" id="b1"/>
        </af:panelFormLayout>
    </af:panelHeader>
    <af:table value="#{bindings.DynamicVo.collectionModel}" var="row" rows="#{bindings.DynamicVo.rangeSize}"
              emptyText="#{bindings.DynamicVo.viewable ? 'No data to display.' : 'Access Denied.'}"
              rowBandingInterval="0" selectedRowKeys="#{bindings.DynamicVo.collectionModel.selectedRow}"
              selectionListener="#{bindings.DynamicVo.collectionModel.makeCurrent}" rowSelection="single"
              fetchSize="#{bindings.DynamicVo.rangeSize}" filterModel="#{bindings.DynamicVoQuery.queryDescriptor}"
              queryListener="#{bindings.DynamicVoQuery.processQuery}" filterVisible="true" varStatus="vs" id="t1"
              partialTriggers="::b1">
        <af:iterator id="i1" value="#{bindings.DynamicVo.attributesModel.attributes}" var="column">
            <af:column headerText="#{column.label}" sortProperty="#{column.name}" sortable="true" filterable="true"
                       id="c1">
                <af:dynamicComponent id="d1" attributeModel="#{column}"
                                     value="#{row.bindings[column.name].inputValue}"/>
            </af:column>
        </af:iterator>
    </af:table>
when I run the page this error is occured
<Nov 13, 2013 2:51:58 PM AST> <Error> <oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter> <BEA-000000> <ADF_FACES-60096:Server Exception during PPR, #1
javax.el.ELException: java.lang.NullPointerException
Caused By: java.lang.NullPointerException
Can any body help me please
thanks

Have you seen Shay's video https://blogs.oracle.com/shay/entry/adf_faces_dynamic_tags_-_for_a
All you have to do is to use the dynamic table to get your result.
Timo

EJB Finder View Links and CMR

Hi,
Can someone please give me some input on the following warning in the JDeveloper online help!
"Warning: You cannot create an EJB finder view link that expresses the same relationship as a CMR."
I'm new to EJB, BC4J and JDeveloper. I created container managed entity beans with local interfaces only to represent my data and relationships. No problems with the mapping so far.
To test the beans I used Session Facades with remote interfaces and build a sample test client.
Now I thought I could create EJB Entity Facades, EJB Finder View Objects, EJB Finder View Links and EJB Application Modules to make use of the BC4J framework in order to speed up programming clients (JSP and JClient).
So I've started studying the JDeveloper online help (which seems to be very useful) and found the above mentioned warning.
Well, better a warning than nothing at all, but some more explanations would have been even better.
Is there no need to use view links with CMR?
How to achieve the same functionality (synchronizing two view objects in a master-detail-relationship) with CMR?
Do you know any examples? I couldn't find any examples using EJB entity facades in the "sample code" area on OTN.
Any comments about other (better) architectures are also welcome. Would it be better to use BMP entity beans in conjunction with BC4J?
Many thanks for your help!
Regards,
Eric

Steven,
thank you for your reply and suggestions - I'll count on that. If I find time I'll read this book. It seems to be very interesting.
For educational purposes I'd like to look at both persistence implementation strategies. I agree that it looks definitly easier to use entity objects. Certainly it's also performancewise a better choice.
Anyhow, could you give me some useful tips for cmp entity beans and finder view objects?
Is there something which works completely different if I use BC4J on top of it?
How to implement a master-detail relationship in JClient (Swing) for example?
What about writing an ejbfinder which doesn't return all, but all data where the foreign key is equal to a parameter passed to the finder method and use this as the source for a detail view object. This could be the primary key of the selected master. Well, I don't know whether this is doable. But that's what comes to my mind spontaneously.
Would this be a solution? I'm still thinking about the aforementioned warning in the online help regarding view links.
I guess the problem is that the foreign key is not part of the entity bean as it's not a cmp-field. Instead you have accessor methods to retrieve a related object or a collection of objects.
I'm sure my questions are not too complicated to answer. It's only hard for a beginner to get an overview.
I'm quite confident that I'll manage this if I give my best and get some help from knowledgeable people like you Steven.
Regards,
Eric

How to create a variant used in SM30,View variant in Parameter transaction?

Dear Team,
I have a view V_TCURR. For which I would be creating a parameter transaction for transaction SM30 by filling the default Values section (VIMDYNFLDS-LTD_DTA_VR, VIEWNAME,TVIMV-VARIANT). The values for first two fields are obvious.
The question is on TVIMV-VARIANT How can we create a variant which can be used in tcode SM30.
Delving a little deeper show that these variants Obsolete since R/3 Release 3.1I: Selection variant for a table or maintenance view.
Since R/3 Release 4.0, there are view variants instead of selection variants.
The field only exists for reasons of backwards compatibility.
If thats is so, How do I use the same in parameter transaction..?
I have tried creating a view variant and use it parameter transaction but in vain..
Please help resolve my problem. I hope I am very clear. If still need any clarification, please get back to me.
Thanks a lot in advance,
Reagards,
Sai.
P.S. Though there are multiple quuestions on simlar subjects none of them has been either answered or is completely relevant to mine.

Dear Suman,
Thanks a lot for the answer. Actually the Tcode is getting created if I do what you have said me.
But when I run the tcode which was created by view variant created, I am not getting the desired details .
To be more clear..
Previously there was a variant (TMIMV-VARIANT) created with follwing criteria..
Table TMIMV.
TABNAME    VARIANT AS4POS            VIEWFIELD NEGATION OPERATOR     VALUE         AND_OR      TABIX
V_TCURR     ZTHB     1     KURST     NOT     EQ     M     AND     2
V_TCURR     ZTHB     2     KURST     NOT     EQ     DWBP     AND     2
V_TCURR     ZTHB     3     TCURR          EQ     THB     OR     4
V_TCURR     ZTHB     4     TCURR          EQ     USD     OR     4
V_TCURR     ZTHB     5     TCURR          EQ     US$          4
When we run tcode created by paramaeter transaction.. viewname as V_TCURR, TMIMV-VARIANT. I am getting the desired records for updation.
But if I do the same using View variant with the same selection criteria
Table            Field name     Operator      Comaparison AND/OR
                                                               Value
TCURR     KURST     NE     'M'     AND
TCURR     KURST     NE     'DWBP'     AND
TCURR     TCURR     EQ     THB     OR
TCURR     TCURR     EQ     USD     OR
TCURR     TCURR     EQ     US$
And the run the tcode created by using the view variant .. I am getting No entries found that match selection criteria...
Could you please help and let me know if I am missing any step.. Kindly also check from your side how this can be achieved.
Thanks a lot in advance,
Sai.

Materialized view (creating and complete refresh)

Good day.
I have a huge query that is used to create a materialized view. The query consist of 9 joins, a lot of aggregations, some subqueries, so we can say it is rather huge. The query itself executes for about 30 seconds and returns about 200 rows. The materialized view creates and refreshes for more than 30 minutes. Can someone please explain me the mechanism of materialized view creation which causes such bad performance.
We use Oracle Database 9.2.0.4.
Thank you in advance.

I've fount the solution. May be it will be useful for someone not regarding that 9.2 database is less used today than 10.2.
I studied carefully the plan of the query and the plan of insert statement that is used when creating materialized view and found the cause of trouble. Insert statements generates VIEW PUSHED PREDICATE and BITMAP CONVERSION FROM ROWIDS when parsing. Bitmap conversion can be removed by setting environment parameter btree_bitmap_plans to false (a well-known issue), but I decided not ot change the production environment. The pushed predicate can be removed by using hint NO_PUSH_PRED to each subquery used in a materialized view. This step reduced the time of materialized view creation and execution to about a minute.
Thank everyone who tried to help.

Class overhead, function overhead and parameter overhead

Hi all,
I am interested in class overhead, function overhead (each function in a class) and parameter overhead (each parameter in function).
I saw somewhere that class overhead are 200 bytes.
Is it wise to give up on class and go for functional programming? (Only classes required to run the j2me app are created and nothing else)
How does function get called? Does it work like a stack? Where each parameters get pushed into the stack and later on pop out when control pass on to the function?
If your program is full of functions doesn't this make it very processor intensive?
What is the best solution?
Thanks in advance!

Hallo,
silly question: but what exactly do you mean when you say "full of attributes and methods that will never be used for this instance"?
I assume that when you have created your class you thought about the attributes and methods you wanted to include, and have not included any unnecessary baggage. I can only think that, perhaps, you have a class X that you would like to reuse, because it does all that you want. The only problem is that, for your specific problem, it carries a lot of excess baggage with it. You only need a few of the attributes and methods. Am I correct?
Such a class reuse will certainly incur some overheads, but let us try to analyse where they are:
1. Extra Code. The 'big' class is already defined and probably already loaded, so there should not be any overheads for the code.
2. Extra Data. Certainly creating a new instance of the 'big' class will require more memory. The question is how big is 'big' class, and how many instances do you want to create or have in existance at any one time? If the class is less than a few kB big and you only need a few instances at any one time, then you can afford to ignore the overhead.
3. Performance. Every time that you create an instance of the 'big' class, the processor must do some work to initialize it. The question is, what is required to initialize the class? This depends on what is in the constructor.
4. Programmer Time. If there is an existing class, then it will (probably, depending on documentation) take less time to reuse the class
than to write another, streamlined class. Someone else will already (hopefully) have debugged the 'big' class.
I think my view would be to reuse 'big' class unless there good grounds not to do so (see above). Your time is more important than a few overheads.

CR2008 . Net App - Parameters and Parameter Panel Not working

Post Author: cehowski
CA Forum: Crystal Reports
I have a CR2008 report with one parameter, which works fine when running it in CR2008. I have an app developed in VS2005 (which should have been updated when I installed Crystal and re-built the app). The new "Sort Labels" work fine, so the Viewer should be OK (the right version). When I open the report in the app, the parameter does not modify the report in anyway, whether a new value is added when it first opens, or I try to change the value using the Parameter panel after it is opened. I've tried Saving with and without data, discarding saved data on refresh, and one or two other properties that seemed like they might have an effect. None of them did. Everything works fine within CR2008 - it is only in VS2005, using the Version 12 viewer, that the parameter does not work (all records are returned by the way).
Any ideas will be appreciated.
John

Carolyn,
Firewall is off. No antivirus. Switching Little snitch on an off makes no difference.
Just tried ot connect to the App Store again, and it says no connection, connect anyway.....I click connect, and the entire window flashes balck and white and I can see data traffic to and from the app via little snitch.....the black screen is it trying to load the page but not getting through.
Strange.
Dominic

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Can't view Impact and Lineage tab in Meta data report

Post Author: mohideen_km
CA Forum: Data Integration
Hi guys,
I have a problem in meta Data Report ..
IN Impact and Lineage Analysis
I can View only OVerview Tab.I can not view Impact and Lineage
Help me to figure out..
Mohideen

Hi,
Select text column (varchar column) -> Treat Text as -> custom text format ->Remove @ (default) -> add [html]<script>sometext(‘@’)</script> followed by your javascript
for eg:
[html]<script>buildGoogleChart(‘@’)</script> <head> <script type="text/javascript"> function show_alert() { alert("Hello! I am an alert box!"); } </script> </head> <body> <input type="button" onclick="show_alert()" value="Show alert box" /> </body> </html>
hope helps u.........
cheers,
Aravind

Downloads from itunesU where viewed, played and saved?

downloads from itunesU where viewed , played and saved?

lse123 wrote:
downloads from itunesU where viewed , played and saved?
Look to see where they are stored in iTunes. Most are downloaded and stored in iTunes U under library. Those should be shown in iTunes U which is a part of the iPod app on the iPad. I have had a couple that had bad data in the metadata and were classified as Movies and placed in Movies. I selected those and right clicked (control click if no mouse with right click) on those, selected Get Info, selected Options, and changed Media Kind to itunes U. They were moved to the iTunes U section by iTunes.

Iterating through master view objects and child view objects in same page

I am working on a project using ADF UIX and Business Components.
I have an application module with two view objects one the master view object and the second the detail object. They are related via a view link.
I would like to iterate through the master view objects displaying a customer name as bold text and then below each customer name I'd like to display the detail records in a table via the detail view object i.e. a seprate table for each customer.
Is this possible - I haven't had much luck!?
Thanks in advance.

That's because
$(".ms-vb2 a").
is bringing back all the pieces that have that class with an anchor on the whole page, not just the ones in the .ms-wpContentDivSpace
I don't know the exact syntax, but I think you need to iterate through all the '.ms_vb2 a' items as well - there are multiple ones, and do something like this inside your other grouping
$(".ms-vb2 a").each(function(index) {
    var val=$(this).html();
   var val2=val.replace(/_/g," ")
   $(this).html(val2);
That's not quite right but maybe that will help.
Robin

Can Designer generate ADF Entity Objects, View Objects and Apps Module ?

Hi all,
On what way can Designer integrate with JDeveloper (+ ADF) ?
Can Designer generate ADF Entity Objects, View Objects and Apps Module ?
Thank you for your help,
xtanto

Designer itself has no direct integration with JDeveloper. However, there are three options. First of all, you can get a JDeveloper extension (download this separately) that lets you create a Connection to a Designer repository. From that Connection you can find modules that you defined in Designer and generate Entity and View objects for the tables and columns that you used in those modules, and an Application Module. It does not create JSPs or other user interface objects.
Another option is to buy JHeadstart from Oracle. This contains a set of code generators and ADF extensions that include an ability to get information from a Designer repository. JHeadstart works fine for non-Designer users too, but was built by the same people who wrote Designer Headstart - they know the repository API intimately.
The third option is to download Oracle Designer Extension Builder (ODEB) which was just recently made available. This is a product of a collaboration between Designer users from the Oracle Development Tools Users Group (ODTUG) and Oracle to extend the capabilities of Designer with user written tools and utilities. You could use ODEB to write your own generators for ADF Business Components. Or you could wait and see if someone else in the user community does this. I hope that you or whoever does such a generator will be willing to share it with us all.

I have previously viewed movies and TV Shows on my IPHONE that I want to delete and free up space so that I can buy new movies/TV show to watch. How do I get them off my IPHONE and my ITUNES account?

I have previously viewed movies and TV Shows on my IPHONE that I want to delete and free up space so that I can buy new movies/TV show to watch. How do I get them off my IPHONE and my ITUNES account?

Hey RR6705,
If you would like to delete previously purchased content off of your iPhone, you may find the steps outlined in the following article helpful:
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store - Apple Support
Cheers,
- Brenden

To-view-id and parameter

Similar Messages

Maybe you are looking for