To view leave status of colleagues while applying leave?

Dear Fouramites,
In Approval Manager can view the team calander for checking the status of subordinates.
Our requirement is client want to give an option to the Employees so that while applying leave they
should see the leave status of their colleagues.
Is this possible in standard ESS Leave request?
Warm Regards
Hari Sankar M

Hi Hari
Can you see what you are looking for in "Show Team Calendar" link
As of Business Packge 1.0 (ECC 600) the SAP Help states Team Calendar is available in the ESS Leave Request application
If it is not available check user authorizations, the configuration in IMG step ESS--> Working Time --->Team Calendar
and the availability of this in the ESS role and Homepage Framework
Thanks
Stuart

Similar Messages

WSR not found while apply leave in ESS

Dear SAP Gurus,
We changed the holiday calendar for some PSA.
In the new calendar, some of the unused WSR for the PSA is removed.
(e.g. Remove a Shop WSR in a Office PSA with Office Calendar)
In this change, we find that some personnel have wrong WSR, so we corrected the personnel records too.
(e.g. A office staff with shop WSR)
After this change there are a few records with WSRwhich do not exists in the current holiday calendar setting, but all of them are in the pass.
(e.g. The Shop WSR, becuase it is the Office Calendar)
But we found that some of these staff will have a error because ESS try to locate the removed WSR while apply leave in ESS, but most of them do not have problem at all.
I think for some reason ESS need to access the WSR in the pass, but I am not sure what it is and I have no right to check the live personnel data too.
So, I would like to know what's the possible cause, so I can tell the user to check.
Thanks in advance.
Regards
Bill

Hi Vamshi,
Thanks for the reply.
Already generate the WSR for the new holiday calendar.
I think the problem is for some reason, ESS required to access the old WSR which do not exists in the new holiday calendar, but I don't know how to find this out because I have no right to read the personnel data in the production environment.
Regards
Bill

Error while applying leave request though poratl

Hi All,
In portal Employee is unable to apply any leave. The system is giving the error message as
"As per policy, Casual Leave cannot be taken for more than 1 working day consecutively,
Please utilise Privilege leave for this purpose. In case you do not have Sufficient PL balance, Please apply for LOA."
But when trying to raise a "Privilege/ Sick" leave , he is still getting the same message.
So he is not able to raise any kind of leave.
So can anyone please suggest a solution.
Regards,
Muni.

Hi Binu,
It is a Std error which you r getting in the system while maintaining EL on that day. Is 07.03.2012 is a paid holiday ?? Then it will give the same error while applying the leave on that day...
You need to check the Holiday class for that abs type in the system.
Regards,
Prasad Lad

Error while applying leave request in Portal

Hi All,
In portal Employee is unable to apply any leave. The system is giving the error message as
"As per policy, Casual Leave cannot be taken for more than 1 working day consecutively,
Please utilise Privilege leave for this purpose. In case you do not have Sufficient PL balance, Please apply for LOA."
But when trying to raise a "Privilege/ Sick" leave , he is still getting the same message.
So he is not able to raise any kind of leave.
So can anyone please suggest a solution.
Regards,
Muni.

Hi,
I Solved my Problem.Actually in WF WS12300111 in Header agent assignment is not set to General task.Now i made it to general task and it solved my problem

Error while applying leave through ESS

Hi All,
In portal Employee is unable to apply any leave. The system is giving the error message as
"As per policy, Casual Leave cannot be taken for more than 1 working day consecutively,
Please utilise Privilege leave for this purpose. In case you do not have Sufficient PL balance, Please apply for LOA."
But when trying to raise a "Privilege/ Sick" leave , he is still getting the same message.
So he is not able to raise any kind of leave.
So can anyone please suggest a solution.
Regards,
Muni.

If the issue is with 2-3 users. Then either its data or authorization issue. Do on thing after performing the same application execute SU53 and ST22 transaction. If there issue with authorization or data then you can find out it from here.
Regards,
Sandip

BSP error while applying a Leave request in ESS

Dear Friends,
Reposting an issue which I posted earlier in ESS Forum as I didn't get solution there and the issue is more technical and moved towards Netweaver applications.
While applying a leave request in ESS portal, I am getting an error page saying Business Server Page error.
Checked related SPRO Nodes: Both ESS UI5 and ESS (Java) nodes. They are maintained. Being HCM Functional Consultant, this error I am not able to analyze anyway. So asking Portal /Netweaver experts here.
Error screen attached-
My earlier thread posted in ESS forum
http://scn.sap.com/thread/3675714
Expecting a quick solution for this as I am stuck in this issue for last 4-5 days .
Regards,
Niladri

Sorted out . Detail can be seen in the Referal link. Closing this thread
Regards,
Niladri

Getting error whils trying to apply leave " hrtim00rec077 "

Hi All,
Getting error message no:hrtim00rec077 while trying to apply leave. There is no quota mapped to this absence type but getting the message "Absence quota 01 not found for grouping 1/41 on 20100401"
Kindly let me know what might be the reason for this error.
Regards,
Srikanth

Hello,
Do you want quotas for this leave?
First, check T554S if you have screen = 2001 and HR Deduction flag activated. This will enable the quota deduction.
Then, you will have to configure T556A for the quotas
Finally integrate all this with T556C - deduction rules and put more details on the selection rules on T559L.
V_T554S_WEB just maps it to the frontend. I believe the big question here is if you have enabled the quotas and quota deduction for this absence type. That is why it's giving the issue.
Regards,
Bentow.

Exclude Weekends and Holidays while applying for leave...

Hi,
Could anyone help me out in excluding holidays while applying for leave via absence management (employee self service) in R12? While clicking on calculate duration it includes weekends as well by default. Since updating the formula BG_ABSENCE_DURATION will involve creating UDTs, modify UDF and additional effort; I tried creating workschedulle and updated the profile HR: Schedule Based Absence Calculation to 'Yes' following the metalink note 'Schedule Based Absence Calculation in Self Service' [ID 437083.1] but no luck. Is there any other additional setup that needs to be done or its better to update Fast Formula. Kindly advise on the same. Thanks in Advance!!!
Thanks,
Ahmed

Thanks much Gaurav. I was able to work it out by creating work schedule itself. I reckon I missed out selecting the schedule pattern. We need to ensure that after creating schedule the pattern needs to be selected and launched. After a while it gets effected in the system. Just in case if others are trying to implement work schedule for working days between Saturday to Wednesday following are the step involved. I have created two schedule pattern with day start as 1 and day stop as 4; and another pattern with day start as 7 and day stop as 7. It works like charm....:)
Regards,
Ahmed

Error in writing to file encountered while applying patch 9.2.0.8

Hi,
I encountered the error message below while applying Oracle 9.2.0.8 patch set using OUI on server running Oracle 9.2.0.7 and Windows 2003 Enterprise Edition SP2:
Error in writing to file 'C:\oracle\ora92\BIN\orapls9.dll'
[C:\oracle\ora92\BIN\orapls9.dll (he process cannot access
the file because it is being used by another process)]
I've already stopped the Oracle instance and services before invoking the setup.exe.
My question is: Why this is happening and what is the resolution to prevent this error from happening?

I used the script in the Metalink note 454040.1 and chose 5. I typed in the orapls9.dll to see which module is locking this dll and I found out it is avrrepsvc.exe which is one of the services our application is running. I just stopped it in Services Console and run the setup.exe of the patch. The installaton of patch run successfully. I checked the version using 'select banner from v$version' and I now got this results:
SQL> select banner from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
PL/SQL Release 9.2.0.8.0 - Production
CORE 9.2.0.8.0 Production
TNS for 32-bit Windows: Version 9.2.0.8.0 - Production
NLSRTL Version 9.2.0.8.0 - Production
I have a related question. When checking from dba_registry, isn't it that versions of components should have been upgraded too? Please see below I what got:
SQL>SELECT SUBSTR(comp_id,1,15) comp_id, status, SUBSTR(version,1,10)
version, SUBSTR(comp_name,1,30) comp_name
FROM dba_registry ORDER BY 1;
COMP_ID STATUS VERSION COMP_NAME
CATALOG VALID 9.2.0.7.0 Oracle9i Catalog Views
CATJAVA VALID 9.2.0.7.0 Oracle9i Java Packages
CATPROC VALID 9.2.0.7.0 Oracle9i Packages and Types
CONTEXT VALID 9.2.0.7.0 Oracle Text
JAVAVM VALID 9.2.0.7.0 JServer JAVA Virtual Machine
ORDIM VALID 9.2.0.7.0 Oracle interMedia
OWM VALID 9.2.0.1.0 Oracle Workspace Manager
SDO VALID 9.2.0.7.0 Spatial
XDB VALID 9.2.0.7.0 Oracle XML Database
XML VALID 9.2.0.9.0 Oracle XDK for Java
10 rows selected.
What tasks did I missed int the steps?
ADDITION:
It looks like I forgot to run the catpatch.sql and utlrp.sql.
Edited by: user5470917 on Jun 19, 2009 2:52 PM

Internal Server error while approving leave in absence management

hi
In my project absence mgt is applicable for Netherland employees. When an NL manager applies leave and his manager from puerto rico tries to approve it from UWL , the manager is getting the following ERROR on clicking on the leave request in his inbox task.
500   Internal Server Error   Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException:
    at com.sap.xss.hr.lea.form.edit.VcFormEdit.setReadOnlyApprover(VcFormEdit.java:467)
    at com.sap.xss.hr.lea.form.edit.VcFormEdit.onInit(VcFormEdit.java:269)
    at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEdit.onInit(InternalVcFormEdit.java:700)
    at com.sap.xss.hr.lea.form.edit.VcFormEditInterface.onInit(VcFormEditInterface.java:165)
    at com.sap.xss.hr.lea.form.edit.wdp.InternalVcFormEditInterface.onInit(InternalVcFormEditInterface.java:158)
    ... 37 more
This UWL error in Leave approval workflow is coming ONLY when PR manager is trying to NL employee's leave .
All other country managers ( US , CH , FR etc) are able to approve the leave without any issue.
We are using the standard leave approval workflow.
ANY SOLUTIONS Plzz???

Hello
The above issue can occur if the rule group , to which this employee belongs, the leave type is not configured correctly. Please check the view V_T556A_WEB. The leave type and the rule group need to be defined here .
Also make sure that the counting rule for the leave type is also define correctly in T556C. Once the leave type for the approver which belongs to the rule group has been correctly configured, way it has been done for normal employees, there will not be any issue.
Kindly complete the necessary customizing and check your results.
Thanks and kind Regards
Ramana

Error while applying patch for SOA suite 10.1.3.4 on Weblogic 9.2 - URGENT

Hi All,
I am trying to apply a weblogic patch on SOA server but facing an error while applying the Opatch . I checked the accessibilty to opatch inventory by using the command % opatch lsinventory . This executed fine and there were no errors. But when I try applying the opatch I get the error -that some jars missing . Even if I replace the jars and try executing opatch again I face the same error . I googled a lot but couldnt find any solution . Please let me what can be done for solving this error .
D:\7337034>opatch apply -oh D:\product\10.1.3.1\OracleAS_1
Oracle Interim Patch Installer version 1.0.0.0.61
Copyright (c) 2009 Oracle Corporation. All Rights Reserved..
Oracle recommends you to use the latest OPatch version
and read the OPatch documentation available in the OPatch/docs
directory for usage. For information about the latest OPatch and
other support-related issues, refer to document ID 293369.1
available on My Oracle Support (https://myoraclesupport.oracle.com)
Oracle Home : D:\product\10.1.3.1\OracleAS_1
Oracle Home Inventory : D:\product\10.1.3.1\OracleAS_1\inventory
Central Inventory : C:\Program Files\oracle\inventory
from : N/A
OUI location : D:\product\10.1.3.1\OracleAS_1\oui
OUI shared library : D:\product\10.1.3.1\OracleAS_1\oui\lib\win32\oraInstalle
r.dll
Java location : "D:\product\10.1.3.1\OracleAS_1\jdk\jre\bin\java.exe"
Log file location : D:\product\10.1.3.1\OracleAS_1/.patch_storage/<patch ID>
/*.log
Creating log file "D:\product\10.1.3.1\oracleas_1\.patch_storage\7337034\Apply_7
337034_06-02-2009_13-39-26.log"
Provide your email address to be informed of security issues, install and
initiate Oracle Configuration Manager. Easier for you if you use your My
Oracle Support Email address/User Name.
Visit http://www.oracle.com/support/policies.html for details.
Email address/User Name: [email protected]
Provide your My Oracle Support password to receive security updates via your My
Oracle Support account.
Password (optional):
Password (optional):
Unable to establish a network connection to Oracle. If your systems require a
proxy server for outbound Internet connections, enter the proxy server details
in this format:
[<proxy-user>@]<proxy-host>[:<proxy-port>]
If you want to remain uninformed of critical security issues in your
configuration, enter NONE
Proxy specification: NONE
** Installing base package **
Deploying core - Version 10.3.1.0.0
Deploying engines - Version 10.2.7.1.0
Deploying metricdata - Version 10.2.4.0.3
Deploying scripts - Version 10.3.1.0.0
Oracle Configuration Manager has been configured in disconnected mode. If the
target ORACLE_HOME is running a database, please refer to the
"Post-installation Database Configuration" section of the OCM Installation
and Administration Guide
(http://www.oracle.com/technology/documentation/ocm.html) to complete the
installation.
View configuration data reports and access valuable configuration best
practices by going to My Oracle Support.
Backing up comps.xml ...
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Please shut down Oracle instances running out of this ORACLE_HOME
(Oracle Home = d:\product\10.1.3.1\oracleas_1)
Is this system ready for updating?
Please respond Y|N >
y
Applying patch 7337034...
Patching jar files...
OPatch encounters the following issues during file patching:
The following java archives on Windows had problems with being patched:
1. orabpel.jar
[ object: DomainFilter.class ]
2. orabpel.jar
[ object: AdapterFrameworkListenerImpl$RoutingRuleXPathInfo.class ]
3. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
4. orabpel.jar
[ Couldn't make backup copy of file. ]
5. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
6. orabpel.jar
[ Couldn't make backup copy of file. ]
7. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
8. D:\product\10.1.3.1\oracleas_1\integration\esb\lib\orabpel.jar
[ No java archive file found. ]
9. orabpel.jar
[ Couldn't make backup copy of file. ]
Replying 'Y' will terminate the patch installation immediately. It WILL NOT rest
ore any updates that have been performed to this point. It WILL NOT update the i
nventory.
Replying 'N' will update the inventory showing the patch has been applied.
NOTE: After replying either 'Y' or 'N' it is critical to review:
My Oracle Support Note 312767.1 How to rollback a failed Interim patch ins
tallation.
Do you want to STOP?
Please respond Y|N >
y
File Patching Error!
ERROR: OPatch failed during patching, possibly due to missing files.
OPatch returns with error code = 200

Hi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks.

Error While Applying patch ST-PI 2008_1_700 to solution Manager

Dear Techies,
Thanks alot for your fast response.
We are trying to upgrade Solution Manager Stack from
ST-PI 2005_1_700 to ST-PI 2008_1_700 ,
While applying patch it was suddenly stopped with an error
"Manual modification adjustment is neccessary"
While I tried to adjust it.
In Note correction tree. This the message with " green tick"
"0001293326 EWA: Newest ST-PI Is Rated 'Outdated'; Wrong RTCCTOOL Date"
and is not allowing me to proceed further.
How to go about.
Thanks in advance.
regards,
Kiran

Hi Varun,
Thanks for your reply.
As suggested by you, I executed "RTCCTOOL" programme.
It Has given that 4 notes were in red status.
They are.
        1. [Note 69455 ]      Addon upgrade ST-A/PI 01N_700SOL
        Description     "Servicetools for Applications Plug-In" for Solution Manager 4.0-7.10 (Addon delta upgrade package)
        Implementation From http://service.sap.com/supporttools->ST-A/PI download the addon upgrade package ST-A/PI
                                 01N_700SOL. Upload to tx SAINT (just as you would do for an installation) and install as per note 69455
                                 Then restart report RTCCTOOL and choose 'List->Refresh from SAPNet'.
        4. [Note 539977 ]     ST-PI Support Packages
Description     Addon supportpackage level 4 for ST-PI 2008_1_700 for 7.00 [patches up to level 4 for Basis tools for services]
Implementation Open http://service.sap.com/supporttools-> ST-PI 2008_1_700 ->Supportpk. Add patch SAPKITLRD4 (and predecessors if not yet implemented) to download basket. Release basket via Maintenance optimizer. Upload from frontend int transaction SPAM, define a queue and import the queue.
        6. [Note 539977 ]     Note 1312413 for ST-PI
        Description     Maintenance Certificates for SPAM/SAINT may get periodically overwritten by invalid ones on ST-PI
                               2008_1_7* SP 00. Prevent this proactively,even if you do not yet use the automatic maint. certificate
                              distribution.
         Implementation We recommend that you implement the Supportpackage SP1 for ST-PI 2008_1* to solve the error. Only if
                                  not possible implement note 1312413   with not version >=12 using SNOTE. Regarding automatic maint.
                                  certificate distribution see http://service.sap.com/maintenancecertificate.
        9. [Note 1293326 ]    EWA serviceprep correct. in sequence.
Description     Wrong alerts appear in EWAlert Service preparation section (Newest ST-PI Rated Outdated / Wrong
                      RTCCTOOL Date) if Solution Manager ST-SER < 701_2008_2 SP1 and satellites on ST-PI 2008_1* / ST-A/PI 01L*.
Implementation Implement the coding correction of this note 1293326   with SNOTE to solve the wrong service preparation alerts. Else if you do not mind the wrong alerts simply set this recommendation manually to green after reading.
These are in green status
Successfully implemented addons/ transports/ notes
        2. [Note 69455 ]    Proc. after addon impl.
        3. [Note 539977 ]   Addon ST-PI 2008_1_700
        5. [Note 539977 ]   Note 1300023 for ST-PI
        7. [Note 539977 ]   Note 1293657 for ST-PI
        8. [Note 12103 ]    Collectors and TCOLL.
While I tried to implement the note "69455" system is giving the message that there are no valid corrections and is coming out of the process
"Note 0000069455 cannot be implemented since no valid correction is available."
And is same for other notes also.
How to go ahead.
Thanks in advance.
Regards,
Kiran

9i and 10g Listener in SUN box How do i stop .while applying the patch.

Hi,
Sun box running - I am having
1. oracle_home 9i Version (database's are running)
My team installed 10g Version 10.2.0.1 in Oralce_home1 there were no database are running in 10g, Now We plan to upgrade into 10.2.0.4 in oracle_home1 while applying patch its asking to stop the listener process.
Is it mean to stop 91 listener or 10g listener?
I had checked the running process in my server using grep -ef
it show all process 9i database's and i find this home1/oracle/product/1020/bin tnslsnr LISTERNER -Inherit. How do i stop ? after applying the patch how do i start?
Is it require down time?
Thanks in advance.
Rajas

Hi
When i check the lsnrctl status it is showing the error , How do i resolve it?
In sun box:
/home1/oracle/pro/920/bin -9i is running
/home1/oracle/pro/1020/bin 10g is running
When i check the lsnrctl status the above oracle home it through error
Connecting to (ADDRESS=(PROTOCOL=TCP)(PORT=1521))
TNS-12618: TNS:versions are incompatible
Thanks in advance
Rajas.
Edited by: Rajas on Sep 23, 2008 8:36 PM

Ad Path worker error while applying patch NO 7429271

Hi All,
I am not able to apply following patch NO 7429271( AD Mini pack) to Oracle application 11.5.9 which is at AD patch level 11i.AD.H
I am getting the following error in ad worker log and the patch does not continue from workers stage here is a log from one of the workers..
*********** Start of AD Worker session *************
AD Worker version: 11.5.0
AD Worker started at: Sat Sep 18 2010 15:53:34
APPL_TOP is set to d:\oracle\prodappl
Worker id = 1
Started by: adpatch
NLS_LANG value from the environment is : AMERICAN_AMERICA.AR8ISO8859P6
NLS_LANG value for this AD utility run is : AMERICAN_AMERICA.AR8ISO8859P6
AD Worker error:
aiurcl(): Discrepancy detected in restart file:
d:\oracle\prodappl\admin\PROD\restart\adpinit.rf9
Line 4 from file = 'Prompt for mailto'
Line to compare = 'Apply mode Setting'
You should check the file
d:\oracle\prodappl\admin\PROD\log\adwork001.log
for errors.
I followed these metalink documents with no use
Note: 358943.1 - Ad Worker Error:Aiurcl():Discrepancy Detected In Restart File:Adpinit.rf9
Note: 159127.1 - Discrepancy Detected in Restart File
Note: 362581.1 - Restart discrepancy in aidrrl3() error while applying a Patch
Note: 736623.1 - How To Take Quick Action On The Relink Failed On The Windows Platform? Adrelink.Sh Adpatch And Adworker Exiting With Status 1
I am trying to apply AD mini pack for my installtation...
Early Repose is highy appreciated.................................
Regards
DVS Shiv Kumar
Edited by: user6650876 on Sep 18, 2010 8:02 AM

Hi,
Any other error messages in the failed worker log file?
Have you tried to apply the patch from the beginning and see if it works?
Please see --> How To Take Quick Action On The Relink Failed On The Windows Platform? Adrelink.Sh Adpatch And Adworker Exiting With Status 1 [ID 736623.1]
If none of the docs helps, please log a SR.
Thanks,
Hussein

Error while applying LM-tools patch using JSPM

hi all,
I got error while applying LM-Tool patch using JSPM. following is the error log. How can i rectify it. please help.
Mar 29, 2010 12:49:57... Info:
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: DROP TABLE "BC_MID_TREE"
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: DROP TABLE "BC_MID_TREE"
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE TABLE "BC_MID_TREE"("NODE_ID" RAW(16) NOT NULL, "PARENT_I
D" RAW(16) , "NODE_TYPE" NUMBER(10) DEFAULT 0 NOT NULL, "NAME" NVARCHAR2(30) DE
FAULT ' ' NOT NULL, "TS" TIMESTAMP NOT NULL, "USER_ID" NVARCHAR2(30) )
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE TABLE "BC_MID_TREE"("NODE_ID" RAW(16) NOT NULL, "PARENT_I
D" RAW(16) , "NODE_TYPE" NUMBER(10) DEFAULT 0 NOT NULL, "NAME" NVARCHAR2(30) DE
FAULT ' ' NOT NULL, "TS" TIMESTAMP NOT NULL, "USER_ID" NVARCHAR2(30) )
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE INDEX "BC_MID_TREE_R" ON "BC_MID_TREE"("PARENT_ID")
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE INDEX "BC_MID_TREE_R" ON "BC_MID_TREE"("PARENT_ID")
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE UNIQUE INDEX "BC_MID_TREE_U" ON "BC_MID_TREE"("PARENT_ID",
"NAME")
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE UNIQUE INDEX "BC_MID_TREE_U" ON "BC_MID_TREE"("PARENT_ID",
"NAME")
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: ALTER TABLE "BC_MID_TREE" ADD PRIMARY KEY ("NODE_ID") NOT DEFERRA
BLE INITIALLY IMMEDIATE ENABLE VALIDATE
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Statement successf
ully executed: ALTER TABLE "BC_MID_TREE" ADD PRIMARY KEY ("NODE_ID") NOT DEFERRA
BLE INITIALLY IMMEDIATE ENABLE VALIDATE
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE successfully written
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE successfully written
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE successfully written
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE successfully written
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Next archive objec
t : dbtables/BC_MID_TREE_ITEM.gdbtable
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Next archive objec
t : dbtables/BC_MID_TREE_ITEM.gdbtable
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: <<< Analyze table
BC_MID_TREE_ITEM >>>
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: <<< Analyze table
BC_MID_TREE_ITEM >>>
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: predefined action
is: >>>DROP_CREATE<<<
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: predefined action
is: >>>DROP_CREATE<<<
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Action: DROP_CREAT
E
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: Action: DROP_CREAT
E
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: DROP TABLE "BC_M
ID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: CREATE TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: (
Mar 29, 2010 12:49:57... Info: "NODE_ID" RAW(16) NOT NULL,
Mar 29, 2010 12:49:57... Info: "ITEM_ID" RAW(16)
Mar 29, 2010 12:49:57... Info: )
Mar 29, 2010 12:49:57... Info: CREATE INDEX "BC_MID_TREE_ITEM_R" ON "BC_MID_TRE
E_ITEM"
Mar 29, 2010 12:49:57... Info: (
Mar 29, 2010 12:49:57... Info: "ITEM_ID"
Mar 29, 2010 12:49:57... Info: )
Mar 29, 2010 12:49:57... Info: ALTER TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: ADD PRIMARY KEY ("NODE_ID")
Mar 29, 2010 12:49:57... Info: NOT DEFERRABLE INITIALLY IMMEDIATE ENABLE VALIDAT
E
Mar 29, 2010 12:49:57... Info:
Mar 29, 2010 12:49:57... Info: 12:49:56 2010-03-29 dbs-Info: DROP TABLE "BC_M
ID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: CREATE TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: (
Mar 29, 2010 12:49:57... Info: "NODE_ID" RAW(16) NOT NULL,
Mar 29, 2010 12:49:57... Info: "ITEM_ID" RAW(16)
Mar 29, 2010 12:49:57... Info: )
Mar 29, 2010 12:49:57... Info: CREATE INDEX "BC_MID_TREE_ITEM_R" ON "BC_MID_TRE
E_ITEM"
Mar 29, 2010 12:49:57... Info: (
Mar 29, 2010 12:49:57... Info: "ITEM_ID"
Mar 29, 2010 12:49:57... Info: )
Mar 29, 2010 12:49:57... Info: ALTER TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: ADD PRIMARY KEY ("NODE_ID")
Mar 29, 2010 12:49:57... Info: NOT DEFERRABLE INITIALLY IMMEDIATE ENABLE VALIDAT
E
Mar 29, 2010 12:49:57... Info:
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: DROP TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: DROP TABLE "BC_MID_TREE_ITEM"
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE TABLE "BC_MID_TREE_ITEM"("NODE_ID" RAW(16) NOT NULL, "ITE
M_ID" RAW(16) )
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE TABLE "BC_MID_TREE_ITEM"("NODE_ID" RAW(16) NOT NULL, "ITE
M_ID" RAW(16) )
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE INDEX "BC_MID_TREE_ITEM_R" ON "BC_MID_TREE_ITEM"("ITEM_ID"
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: CREATE INDEX "BC_MID_TREE_ITEM_R" ON "BC_MID_TREE_ITEM"("ITEM_ID"
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: ALTER TABLE "BC_MID_TREE_ITEM" ADD PRIMARY KEY ("NODE_ID") NOT DE
FERRABLE INITIALLY IMMEDIATE ENABLE VALIDATE
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Statement successf
ully executed: ALTER TABLE "BC_MID_TREE_ITEM" ADD PRIMARY KEY ("NODE_ID") NOT DE
FERRABLE INITIALLY IMMEDIATE ENABLE VALIDATE
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE_ITEM successfully written
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE_ITEM successfully written
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE_ITEM successfully written
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Runtime XML of BC_
MID_TREE_ITEM successfully written
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Analysis and adjus
tment of tables successfully executed
Mar 29, 2010 12:49:57... Info: 12:49:57 2010-03-29 dbs-Info: Analysis and adjus
tment of tables successfully executed
Mar 29, 2010 12:49:57... Info: Finished successfully: development component 'tc/
slm/mid/dd'/'sap.com'/'MAIN_APL70P18_C'/'2712380'/'0', grouped by
Mar 29, 2010 12:49:57... Info: Starting to save the repository
Mar 29, 2010 12:49:57... Info: Finished saving the repository
Mar 29, 2010 12:49:57... Info: Starting: Update: Selected development component
'tc/archtech/browser/viewer/locator'/'sap.com'/'MAIN_APL70P18_C'/'2712383'/'0' u
pdates currently deployed development component 'tc/archtech/browser/viewer/loca
tor'/'sap.com'/'MAIN_APL70VAL_C'/'1496536'/'0'.
Mar 29, 2010 12:49:57... Info: SDA to be deployed: /usr/sap/IRX/DVEBMGS02/SDM/ro
ot/origin/sap.com/tc/archtech/browser/viewer/locator/MAIN_APL70P18_C/0/2712383/t
carchtechbrowserviewerlocator.sda
Mar 29, 2010 12:49:57... Info: Software type of SDA: J2EE
Mar 29, 2010 12:49:57... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE A
pplication) *****
Mar 29, 2010 12:49:58... Info: Starting cluster instance processes.
Mar 29, 2010 12:50:03... Info: Starting the instance JC_PRDCIXI_IRX_02 running o
n host PRDCIXI_svc
Mar 29, 2010 12:50:03... Info: Starting the instance JC_PRDCIXI_IRX_02 processes
. The instance is running on host PRDCIXI_svc
Mar 29, 2010 12:50:03... Info: Starting the process dispatcher
Mar 29, 2010 12:50:03... Info: Starting the process server0
Mar 29, 2010 6:49:58 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE App
lication) *****
Mar 29, 2010 6:49:58 PM Error: Aborted: development component 'tc/archtech/brow
ser/viewer/locator'/'sap.com'/'MAIN_APL70P18_C'/'2712383'/'0', grouped by softwa
re component 'LM-TOOLS'/'sap.com'/'MAIN_APL70P19_C'/'1000.7.00.19.0.200904271432
29''/'0':
SDM could not start the J2EE cluster on the host PRDCIXI! The online deployment
is terminated.
A timeout occured during the cluster running verification.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDepl
oyerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Mar 29, 2010 6:49:58 PM Info: Starting to save the repository
Mar 29, 2010 6:49:59 PM Info: Finished saving the repository
Mar 29, 2010 6:49:59 PM Info: Starting: Update: Selected software component 'LM
-TOOLS'/'sap.com'/'MAIN_APL70P19_C'/'1000.7.00.19.0.20090427143229''/'0' updates
currently deployed software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70P14_C'/'1
000.7.00.14.1.20080124101556''/'0'.
Mar 29, 2010 6:49:59 PM Error: Aborted: software component 'LM-TOOLS'/'sap.com'
/'MAIN_APL70P19_C'/'1000.7.00.19.0.20090427143229''/'0':
Failed deployment of SDAs:
development component 'tc/archtech/browser/viewer/locator'/'sap.com'/'MAIN_APL70
P18_C'/'2712383'/'0' : aborted
Please, look at error logs above for more information!
Mar 29, 2010 6:49:59 PM Info: Starting to save the repository
Mar 29, 2010 6:49:59 PM Info: Finished saving the repository
Mar 29, 2010 6:49:59 PM Info: Restoring the state of the instance (JC_PRDCIXI_I
RX_02) process server0 from Stopped to Running
Mar 30, 2010 12:50:00... Error: Received exception when restoring Engine state:
A timeout occured during the cluster state restore verification.
Mar 30, 2010 12:50:00... Error: -
At least one of the Deployments
failed -
Regards,
Priya

Hi Priya,
As per your error message, there is problem with the SDM is not starting after finishing deployment on SAP J2EE Engine Deployment. Development component are not deployed properly due to error message
> SDM could not start the J2EE cluster on the host PRDCIXI! The online deployment is terminated. A timeout occured during the cluster running verification. P
Please check the default timeout and increased as requred.
Please check the below thread to rectify this issue.
SDM Troubleshooting : http://help.sap.com/saphelp_nw04/helpdata/de/76/fb72ec091f4bf8a2d8ba321bb7e8d9/frameset.htm
SDM Troubleshooting : https://cw.sdn.sap.com/cw/docs/DOC-29627:
Hope it helps
Regards
Arun

To view leave status of colleagues while applying leave?

Similar Messages

Maybe you are looking for