To view the list of users in Satellite Systems from Solman

Dear Friends,
We wish to view the list of users in a satellite system (say ECC5.0) from solution manager 4.0, can anyone help us to find the same.
Regards
Senthil

Hello Senthil,
You mean the list of BP associated to the satellite users already created? If this is the case
in DSWP, choose a Solution that has your satellite as system and go to Edit->BP
Add the satellite system to the list and if I don´t remember wrong you will get the
BP for the satellite users already created in the righ chart.
Sory if I don´t get the correct question?
Best regards,
Dolores

Similar Messages

/BDL/TASK_PROCESSOR not getting triggered in satellite system from Solman

Hi,
We have scheduled EWA report in Solution Manager for one of the satellite system.
Solution Manager has sudddenly stopped creating of job /BDL/TASK_PROCESSOR0000002218 (ie job which is created immediately as EWA is scheduled in Solution Manager)
/BDL/TASK_PROCESSOR is running correctly and on hourly basis in satellite.
The EWA report is getting generated in Solution Manager after long time and without job /BDL/TASK_PROCESSOR0000002218 (is sessin specific job) being triggered.
Kindly help.
Regards,
Trupti M

Hi Paul,
My problem is solved.
Actually the Task: EarlyWatch Alert for Solution Manager under 'To Do' view of sdccn of satellite system was somehow getting scheduled as Back dated(ie instead of 30.04.2020 it was getting scheduled at 28.04.2010)
Due to this when we would do 'Start now' for the Task 'EarlyWatch Alert for Solution Manage' it was not getting triggered.
So I manually did refresh session which was mentioned under steps for manully sending data to SolMan under solution_mamanger tcode.
Due to this job BDL/TASK_PROCESSOR0000002237 got created.After this job got completed Task ''EarlyWatch Alert for Solution Manager ' got automatically generated.
I back dated the date for Task ''EarlyWatch Alert for Solution Manager" and started it.
Due to this the job /BDL/TASK_PROCESSOR0000002238 got created in satellite system for sending data to SolMan (This was not happening earlier.)
Extract from Solution_Manager tcode when scheduling:
When the Session Refresh task has been processed, a new task with the appropriate session type and session number appears in the To do view. This task collects and sends the data for your session. If a new task does not appear, search in the task-specific log for errors that ocurred during the Session Refresh task and make any necessary corrections.
To start the task immediately, select it and right-click to call up the context menu.
Choose Start Now. When the task has been processed successfully, it appears in the Done view. The data has been sent to your SAP Solution Manager system. You can check this in the task-specific log.
Thanks for all your help. Hoping my post will also be helpful for others.
Regards,
Trupti M

View the Apllication Server User

I have an application runing in AS 10g.
Users are connected through browser.
I want to view the list of users details who currently using the application.

What kind of application are you talking about? Is it forms, J2EE, PL/SQL? Also, are you using SSO, personal accounts, logging tables, logging anyway...
Without a proper description of the application you mentioned, there is no way you can get an answer.

Tcode to view the list of all dialog users in SAP XI

Dear all,
What is the Tcode to view the list of all dialog user is SAP XI system.
I checked with SU01, it doesn't have a option to display the list of existing users.
Any other Tcode for this purpose.
Regards,
Younus

Hi..
T-code AL08 -> list all logged users(user login logon)
Regards..
krishna..

I have a requirement where I have to give the list of users who can access a specific computer. I am new with PS. Do you have a script to list users that can access a computer object of AD ?

I have a requirement where I have to give the list of users who can access a specific computer define in AD.
I am new with PS.
Do you have a script to list users that can access a computer object of AD ?
I have executed the following script but it does not give me the access rights of who can access the computer 'computername'
How can i have this information. please help
Import-Module activedirectory
$computer=get-adcomputer "computername" -properties ntSecurityDescriptor
$omputer.ntsecurityDescriptor.Access | select-object -expandproperty IdentityReference | sort-object -unique

I would say that, since the OP has so little info, there are no policies in use. It there were then this question would never be asked the way it is being asked.
I had a client call with a letter from their insurance company; an accountant with malpractice insurance. THey asked the same question inmuch the same way. "What computer can you users access?" The question should be more like
"Do you have a policy that restricts access to computers and do you audit for compliance?"
I have had other clients whose insurance asked the question in that way. It produces a better view of what should be happening and how to show compliance.
I recommend that companies being asked these questions by their legal departments or insurance companies should contract with a god computer security consultant to assist with answering these very tricky questions. Of course if it is just you boss's
curiosity then you may need to discuss his requirements with him in more depth.
¯\_(ツ)_/¯

How can we find the list of user exits for a transaction

hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadish

hi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
             http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen

Query to find the list of users having access to a particular scenario

Hi,
I am learning Hyperion Planning 9.2 x version. I wanted to know the query to find the list of users having access to Plan Iteration - 1 scenarion.
As I am new to Hyperion Essbase and Hyperion Planning, I am assuming these ideas work out to get the desired result.
1) As Hyperion Planning uses Relational DB to store the User Security information, we can query the list of users who is having access to Plan Iteration - 1 Scenario.
I am not sure if this solution works. Please correct me If I am wrong.
2) We can also query from the essbase editor to find out who all having access to this scenario.
If the above is correct, can you please provide me the query.
I am really need of this and I will be happy if any one provide the solution.
Thanks & Regards,
Upendra. Bestha

Hi,
If you are looking for some SQL to retrieve the access rights by member then you can use something like (SQL Server code though can easily be modified for Oracle)
SELECT usr.object_name as Username,mem.object_name as Member,
'Access Rights' = CASE acc.access_mode
WHEN -1 THEN 'None'
WHEN 1 THEN 'Read'
WHEN 2 THEN 'Write'
WHEN 3 THEN 'Write'
ELSE 'Unknown' END,
'Relation' = CASE acc.flags
WHEN 0 THEN 'Member'
WHEN 5 THEN 'Children'
WHEN 6 THEN 'Children (inclusive)'
WHEN 8 THEN 'Descendants'
WHEN 9 THEN 'Descendants (inclusive)'
ELSE 'Unknown' END
FROM
hsp_access_control acc, hsp_object mem, hsp_object usr
WHERE acc.object_id = mem.object_id
AND acc.user_id = usr.object_id
AND mem.object_name = 'Plan Iteration - 1'
Cheers
John
http://john-goodwin.blogspot.com/

How to find the list of users used transcation from last 2 days plz urgen

hi friendd
i am in need of knowing the list of users used transcation in last 2 days
can any one help me . how to find out the list of users and used trancation in detail or step by step
thanks in advance .i know that i can see in st03 but i dont find any user list or trancations .
apart from that so we have any other transcation to see the user in sap abap box
regards
raja

This info has been posted before but here you go (this is an alternative way to Bernhards):
ST03N, make sure you are in Expert Mode (not Service Engineer)
Expand Workload
Expand Total
Double Click on the day you want to analyse
You can see transaction details under Transaction Profile -> Standard
You can see what tx a user has started under User & Settlement Statistics -> User Profile
If you are not seeing any data then speak to your Basis administrator about what they are doing with the log files.

How to get the list of users who has access for list of tcodes.

How to get the list of users who has access for list of tcodes.

Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned.

How can I find out the list of users who has the access to IT 0008

All,
How can I find out the list of users who has the W R permission for IT 008
for others?
SUIM doe not look like giving me the correct results.
Please advise.
Thanks,
From
PT.

combine tables AGR_1251 and table AGR_Users on keyfield AGR_USERS
in tabel AGR_1251 select on Field LOW values IT0008.OR W OR R,
noiw you get also other values
So better solution run the query twice over AGR1251 first on IT0008 and secondly on values W OR R and then the result over table AGR_USERS
Youu also might put an additional selection on object P* (only selecting HR objects)
output wll be UID in table AGR_USERS

Query to find out the list of user who have delete access

Hi,
I need a query to find out the list of users who have delete access on perticular folder/universe/ reports in infoview.
Please advice.
Regards,
Neo.

orton607 wrote:
thanks for replying guys. But the thing is i am using dynamic sql execute immediate in my package, so i want those tables also and the schema name.
thanks,
ortonThis is not possible. The best you could do is to have a good guess.
Or how would you parse some dynamic statement as this:
   v_suffix := 'loyees';
   v_sql := 'Select count(*) from (select ''nonsense'' col1 from emp'||v_suffix||') where col1 = ''Y'''';
   execute_immediate(v_sql);
...What is the table name? How do you want to parse that?
Better rewrite all dynamic SQL statements into non dynamic ones. Or do the source control logic for those dynamic parts in an extra module. For example implement your own dependency table and force every developer to add there all dynamic parts.

Tcode to view the list of orders with reason for rejection

Hi friends,
Can any one tell the T.code or report to view the list of sales orders or Scheduling agreements with Reason for Rejection updated.
Kindly help.
Regards,
K.Vivek

Hi Vivek,
Use Tcode VA05 i.e. List of Sales Order. In this Tcode you can enter sales document type, sales area and other related data. After execution, from layout you can select Reason for Rejection from the list.
This way you can filter all the sales documents including Scheduling agreements by using sales document types.
Hope this will help you.
regards,
Sagar Wagh

By API action, how can I get the list of user IDs within a specific group (which is created by API) ?

By API action, how can I get the list of user IDs within a
specific group (which is created by API) ?
or How can I get the group (which is I create by API) ID to
which a specific user belong by API action?
Thanks
Alex

The poster already posted at the Acrobat Users Community, Interactive Forms that sums up a client order from catalog. The sample form posted to Acrobat.com was a revision of the sample form that came with Acrobat 4.0. There are some fairly advance scripts, templates, and document level functions involved with this form.

I keep trying to add songs to my wish list but when I view the list there's nothing there.

I keep trying to add songs to my wish list but when I view the list there's nothing there.

You click on an item's price to buy it - there used to be a 'buy all' button on the wish list screen, but for some reason that has been removed from the current version of iTunes, so you can only buy items individually by clicking on their prices.

T.codes to view the list of persons that are assigned to "activity"

Hi Guru's
Are there any transaction codes to view the list of persons that are assigned to u201Cactivity - personal assignment tabu201D in the project?
Regards,
Bha

the same you can view from CJ20n , by clicking perticular activity--> click on person assignment tab.
This can be true for all the netwrok maintenance txn.
Regards
Nitin

To view the list of users in Satellite Systems from Solman

Similar Messages

Maybe you are looking for