To what does G4 error code post16/4609 refer?
to what does G4 error code post16/4609 refer?
G4 MDD 1.42 PPC passes all hardware tests but gives post16/4609 error at start up.
What does it mean?
What is the resolution?
I don't get any unhappy beeps.
I get the chime. If I am not patient restarting I get high speed fan - I shut off be patience restart and get chime and search for drive then circle slash. hardware test gives me the master post 16 / 4609. - suggesting a bad drive according to other apple pundits. However, I have put two new 250GB WD drives in and still get a mass storage error. My G4 Mdd 1.42 supports drives 128GB+. I've replaced IDE cables and have master drive with out a jumper and have tried slave at CS and 3/4 slave setting all with the same result.
Target boot got me to the "firewire drive" showed me one unformatted 250GB drive and I used disc utility to partition it according the PPC settings. Still same error.
What gives?
Similar Messages
-
What does the error code 0x80090318 mean connecting to IStore?
What does the error code 0x80090318 mean connecting to IStore?
I think the problem was using a WPA2 network rather than a WPA network. When I tried connecting to a WPA network, everything went fine.
-
HT201250 what does reported "error code 6584" mean ?
What does reported "error code 6584" mean ? when trying to get into my time machine back up.
First, I suggest you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
2. Open the Time Machine pane in System Preferences and check that the device is selected as a destination. If it isn't, select it and try again.
3. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
4. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups on the device will be lost, so don't do this until you've backed up to another device. After erasing, select the device again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible. -
What does this error code mean? Help!!! First post.
New guy here. My wifes computer starting making strange repetitive hard drive noises several days ago. A few frozen screens and now will not boot. The computer is a Powerbook G4 15in. I ran the hardware test several times and got no error code. I even ran the extended test twice with no luck. Finally I got an error code of 2 STF/4/3:ATA-100ata-6-Master. I ran again and got 2STF/3/3:ATA-100ata-6-Master. Last time got 2STF/1/4:ATA-100ata-6-Master. What does it all mean? Thank you for any help. My wife is a teacher and needs her computer every day.
Hi, Dan - Welcome to Apple Discussions.
A 2/STF... error indicates the imminent failure of the hard drive. If possible, you should connect your wife's computer to another FireWire equipped Mac and attempt to boot it into target disk mode in order to retrieve what personal data you can.
If the machine is still under warranty, contact AppleCare (800.275.2273), inform them of the error messages you're getting, and arrange for them to replace the drive.
Good luck!
Tuttle
1529/8237 -
On updating Creative Cloud, I get an error code 50 - what does this error code mean?
Downloading and installing an upgrade to Creative Cloud, I keep getting an error code 50. I have look for a list of error codes with no luck. Can anyone tell me what this error code means and what the fix is? Thanks in advance.
Error 50 https://forums.adobe.com/thread/1432237 may help
-
If the Adobe Access Reference Implementation License Server throws a 300 error code, the most likely issue is that the evaluation of the Adobe Access DRM policy failed during license issuance, and that the license server refused to issue a license.
For example, if the policy specifies an end date that was in the past, the license server will see that the current time is beyond the validity date specified in the policy and reject the license request, recording an error code 300 in the Adobe Access license server's logfile.
cheers,
/Eric.I can't believe there is no answer to this question.
after all day researching I've given up google and went back to basics
OS X Server essentials book....
and I found it ...
So in Server.app left panel top... click on your server name and than Settings tab in the right one.
make sure that Enable Apple push notifications are ticked
Tha... tha... thats all folks -
iTunes error code (-45054) comes up when trying to download a M4b file to our computer to synch with an Ipad. We get this error code when we try to open this audiofile in iTunes and when we click on the OK button on the error code box, iTunes quits itself. Won't open without the error box showing: "An unknown error occurred (-45054)" and quits itself when you click on OK to close the error message box. Uninstall? How? Any ideas or suggestions?
Still have the same issue ? I have it too ! Trying to re install iTunes but the issue is always the same ! ??
-
What does the error code -41004 mean in print report.vi?
I am getting the following error in the Print report.vi.
Error Code : -41004
Error Scource : Print Report.viPrint_VI_Image.viHi
I have attached the main vi which is using the NI-Print Report.vi.
I have also attached the image of the error desciption I got.
Attachments:
OPG_Print_to_PDF.llb 94 KB
error.bmp 273 KB -
mac airport time machine i tried to open up error code 6584 would not open please help !
First, I strongly suggest that you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
2. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
3. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups will be lost, so don't do this until you've backed up to another device. After erasing, select the TC again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible. -
What does this error code mean?
I keep trying to update my regular adobe and I keep getting this error code 1310 it states that I need to verify that I have authority for file C:\config.Msi\PFCICE.tmp file. I assume this may have something to do with my virus suite, but really have no idea on how to fix this. Anyone got any help for me it is driving me crazy!
Please refer : http://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html
-
What does A12E5 error code stands for?
I tried to download an update for Creative Cloud desktop, but I failed (several times).Updater says :"there seem to be a problem with download process" and gives me this error code.
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
--has links for error codes A12E1 @Install and U44M1P7 @Update which may help -
Hi, what does the Error Code 4sns/1/40000000:IDOR-6.188 mean?
hi to everyone
A friend of mine has a Mac Book pro. Several days ago it wouldn't start up any more. It just goes on, then clicks and goes off. The only possibility was to press and hold the Power Button. After this procedure the MacBook booted up but was very slow. The cursor hangs etc.
I was able to do an extended diagnostic test and got the following error:
4sns/1/40000000:IDOR-6.188
I found some messages regarding hdd via google but the hadn't any value for me.
Best regards,
NicoI ran the hardware test on my MacBook unibody and got the same result. Did you ever get an answer as to what this code means? I haven't been able to Google it either.
-
What does AHT error code 4SNS/1/40000000:TB1T-128.000 mean?
My MacBook froze on me last night while running Firefox w/ 4 windows open, each with 6 or more tabs. Seemed partly due to using the instant message ap on Facebook. The machine forze with the beach ball spinning it's heart out. Shut it down, restarted, and got a freeze during start up. Tried again this morning and the machine seemed to run ok for a session, after which I closed the lid without shutting down. After opeing the lid, the machine ran ok, then slow, then froze. I eliminated peripheral problems, eliminated software problems, then ran an Apple Hardware Test.
It produced the code: 4SNS/1/40000000:TB1T-128.00
This code does not show up in Google or this forum. Any idea what it means or where I may find out what it means? It's a late 2008 MacBook, so no warranty whatsoever.
Thanks in advance for any help!
KermitI ran the hardware test on my MacBook unibody and got the same result. Did you ever get an answer as to what this code means? I haven't been able to Google it either.
-
Anonymous UUID: E18D4DDF-5B1B-E177-D59B-E25D0E020829
Sun Nov 3 14:48:45 2013
panic(cpu 1 caller 0xffffff8009c54be4): "a freed zone element has been modified: expected 0xffffff80239f1490 but found 0xffffff80339f1490, bits changed 0x10000000, at offset 0 of 16 in zone: kalloc.16"@/SourceCache/xnu/xnu-2422.1.72/osfmk/kern/zalloc.c:461
Backtrace (CPU 1), Frame : Return Address
0xffffff8082ed3560 : 0xffffff8009c22f69
0xffffff8082ed35e0 : 0xffffff8009c54be4
0xffffff8082ed3620 : 0xffffff8009c5267d
0xffffff8082ed3680 : 0xffffff8009c51d09
0xffffff8082ed3780 : 0xffffff8009c2aa2f
0xffffff8082ed37b0 : 0xffffff8009cd52da
0xffffff8082ed37e0 : 0xffffff7f8bf6378c
0xffffff8082ed38c0 : 0xffffff7f8bf67402
0xffffff8082ed3bd0 : 0xffffff8009dfc9db
0xffffff8082ed3c30 : 0xffffff8009dd544b
0xffffff8082ed3cb0 : 0xffffff8009dd4da4
0xffffff8082ed3d70 : 0xffffff8009dc2ebf
0xffffff8082ed3f50 : 0xffffff800a03de23
0xffffff8082ed3fb0 : 0xffffff8009cf3e06
Kernel Extensions in backtrace:
com.apple.filesystems.msdosfs(1.9)[EAB7553F-8FD7-364E-BD4C-756F4FDE7600]@0xffff ff7f8bf62000->0xffffff7f8bf6ffff
BSD process name corresponding to current thread: mdworker
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000009a00000
Kernel text base: 0xffffff8009c00000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 383590844327
last loaded kext at 268368078419: com.apple.driver.AppleUSBCDC 4.2.1b2 (addr 0xffffff7f8bf70000, size 20480)
last unloaded kext at 382156000074: com.apple.driver.AppleUSBCDC 4.2.1b2 (addr 0xffffff7f8bf70000, size 16384)
loaded kexts:
com.apple.filesystems.msdosfs 1.9
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.11
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleLPC 1.7.0
com.apple.GeForceTesla 8.1.8
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBOHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus:At that point, I had taken one of the DIMs out to see if the RAM was the issue. I took it to the Apple Store and they said that the hard drive might be bad, so they wiped everything on the hard drive. After that, I was still experiencing the kernel panics. So another guy looked at it and said that it might be bad RAM. So I called the company and got them to send me more RAM and after inserting the new RAM, I still get kernel panics. I've been saving all the panic reports in a folder on my flash drive. Today I got a total of four. And then I got four the day before that. Mind you, this didn't start happening until I upgraded my system to Mavericks.
I really wish there was a way I could post them all so someone could look at them, cause to be honest, none of the code in it makes any sense to me. -
When synching my iphone to my itunes, I get an error message at the end with code 1150. What is this error code and what does it mean?
try uninstalling and reinstalling itunes on your computer. here is a link for that http://support.apple.com/kb/HT1925
Maybe you are looking for
-
MM Report for Reorder and lead time
Hi, Can anyone suggest me a report that can show information by materail such as min./max. quantity, re-order or safety stock, and replensihment lead time. Thanks Atif
-
Calling SAP script program in BAPI and want to display in html format
Dear All, I am writing bapi and calling sap script program in it. I want output in html format pl suggest me same coding is working for report giving error in sapscript only. types: begin of tt_html, html type w3html, end of tt_ht
-
Saving a page with frames in it
I made a site that has frames to try and make it look better but is there any way to save all of it as one page so i can upload the page to a server online.
-
Try to call Web Service from SolMan
Hello Experts, i try to call the WebServices from the SolMan, but i cannot find them in the WebService Navigator of the Instance. The System number is 01 so i have to call the port 50100 to get to the right system. right? in the Solution Manager itse
-
i am creating a Risk and trying to do risk analysis(RA) at Role(or User level). I have created 2 functions with 1 tcode each.on backend i have created 3 roles, where 2 of the roles contain 1 (different)tcode each, and the 3rd role contains both the t