Toast 11 DVD burning

Greetings, I don't burn many DVD's any more but I had no alternative on this one.
While the encoding and multiplexing didn't seem to take an abnormal amount of time,
it took over an hour to burn 1 of 3 two hour DVD's (regular, not BD) on Titanium 11 latest version along
with latest version of Yosemite on a 27inch iMac 3.2ghz i5 quad with 16 gig RAM.
As it has no internal disc burner,
I have an OWC BD burner virtually brand new as my external.
I inserted disc 2 and departed for an hour and a half.
When I returned, it said it had burned 7%!
I aborted.
Is there an alternative method to burning a DVD efficiently?
From what I read Toast 12 is problematic as well.
Before sending this, I thought to try Toast 10 which I did not delete, thankfully!
I did a disc copy and it took 18 minutes to read and copy the first disc without issue on Titanium 10.
Go figure...
Any feedback would be appreciated because I would like to burn BD.
Thanks!

Greetings, I don't burn many DVD's any more but I had no alternative on this one.
What type of DVD disk are you trying to burn: a video DVD or a data DVD? It sounds like a video DVD since you mention encoding and multiplexing.
Rather that burn directly to disk have Toast save the project as a disk image. That separates the encoding from the burning process.
Mount the disk image on the Desktop and play it with DVD Player. If it plays OK the encoding was successful.
You can then burn it to disk (at the slowest speed possible) with either Toast or Disk Utility. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

Similar Messages

Re-Toast DVD - is it the same as IDVD - That is can you burn a number of .mov slide shows on the same disk? Thank you

Re-Toast DVD - is it the same as IDVD - That is can you burn a number of .mov slide shows on the same disk? Thank you

Toast can author and burn video DVDs but it's not nearly as versatile as iDVD is in creating video DVDs. Toast can only create one menu so all items must be on it, i.e. no sub-menus, no animated menus, etc.

Using Toast to burn DVD

Should I invest in purchasing Toast 9 to burn my standard DVDs? So many people keep talking about using Toast to burn the disc instead of using iDVD...is there a reason for this?

iDVD and Toast take very different approaches to serve users' desires in making video DVDs. iDVD has wonderful motion menus with sound while Toast has basic still, silent menus. iDVD is very limited in the video formats it can use for the source while Toast accepts a broad variety of video formats. iDVD only authors with uncompressed PCM audio while Toast can author with compressed Dolby Digital AC-3 audio which can leave more space for a higher video bit rate. Toast also has custom encoding settings whereas iDVD doesn't let you modify its settings.
What this means is Toast can't compare to iDVD and iDVD can't compare to Toast depending on what the user wants to have in a video DVD. Of course Toast does a lot more than create video DVDs.
If iDVD is meeting your needs then I'd say you don't need Toast for that purpose, but may want it anyway for other reasons. If you are finding iDVD too limited or too much work then I recommend Toast (or Popcorn 3) to give you more options.
As a disclaimer, I very rarely use iDVD because I usually don't have need for its menus, I prefer AC-3 audio on my DVDs and the source for many of my projects are existing MPEG 2 videos that would need to be re-encoded for use in iDVD. So I'm biased toward Toast. It doesn't mean I think Toast is "better"; just better for my needs.

Is it better to export an iMovie project as QT and use Toast to burn a DVD for general use or to export to iDVD and burn VD from there? Why?

Is it better to export an iMovie project as QT and use Toast to burn a DVD for general use - or to export iMovie project to iDVD and burn DVD from there? Why?

Toast probably maintains better quality if you are just doing simple conversion direct from your camera straight into Toast and then to DVD. There's a lot less transcoding steps and loss of quality in that direct to DVD disk creation in Toast. However, having said that,...There's good arguments probably for both.
What I've seen promoted most often (as most people don't have Toast or aren't motivated to buy it) is to Share to Media Browser (choose the Large size option) and then from inside iDVD click the Media Button and the Movies button to find the project under the iMovie star icon in the Media Browser window. Drag that project into your iDVD project and burn the disk.

I have Toast Titanium. How do I transfer an existing slideshow with audio from iPhoto to Toast to burn onto a dvd to play in a dvd player?

I have toast Titanium. How do I export an existing slideshow with photos and audio to toast to burn onto a dvd to play in a dvd player?

to export from iPhoto select the video and export - as to how to use Toast - that is a wuestion ofr their support - it does not involve iPhoto once you do the export
LN

Painfully slow DVD burning process with Toast .Tips welcome.

Just new to Mac,, and I am going crazy trying to burn/copy a DVD (legally). I do see that it is burning anywhere from 1-3 times rate (no wonder).I give instructions to do it on auto. And if I bring in a file to burn, which is the best type to import to Toast to burn(and less loss of quality)? Should I, or can I replace (upgrade) my 8 X drive (Matshutita?). Any programs (besides Toast)that will handle burning process faster? I used to grab an mpeg file on my PC, and have it burned within 25 minutes tops with TMPGenc for example. I don't think I can handle the slowness.

Even if you have a fully comliant MPEG-2 source, say EYE TV or a VOB file you still have to "author" the DVD with Toast (or DVD Studio Pro for $1000) to build the final DVD in the right format with VIDEO_TS folder, IFO and BUP files that guide the player. Use Toast. Most of the time a compliant MPEG-2 will not re-encode so the process is quite fast. Set the encoding option to "Never". If it needs to be re-encoded it will do that despite the "Never".
Waste of time paying anything to put a new DVD drive in an iMac. Leave it alone and get an external LaCie firewire as I advised already. The authoring time has zero to do with the drive since all the encoding is done by the mac and then you burn the final image to a DVD. A 1X or 20X won't affect the speed.
I just think the internal drives , iMac, MacBook Pro are slow and pokey and a hassle to use and $100-$150 is worth the expense. The D2 drives come with a full version of Toast as well or they did when I bought mine.

Toast 7 + multiple dvd burning

does toast 7 support burning multiple dvds at the same time or does dvd studio pro have enough options to do the same?

DVDSP can only burn one DVD at a time.
I don't know about Toast 7. I'm still using Toast 5 which cannot burn more than one at a time.
However, Disk Utility, which is part of MacOS X 10.4, can burn mulitple DVDs in multiple drives. To use Disk Utility, first create a disk image with DVDSP by selecting hard drive during the format process instead of your DVD drive. Open the resulting disk image file in Disk Utility and you can burn as many DVDs simultaneously as you have DVD burners.
In Disk Utility,
1. Select your disk image from the list on the left.
2. Click the "Burn" button (top left of window) and select the DVD burner from the popup menu.
3. When your blank is loaded and ready, click the Burn button.
As soon as the first DVD starts burning, repeat the process except this time select a different DVD burner from the popup menu.

Possible to install HD-DVD Burner in iMac G4?

Hi, I was wondering if it is at all possible to install HD-DVD burner in a iMac G4? Anyone tried this?

I know that Toast Titanium 8 for Mac supports Blu-Ray burning (Apple's loyalties are in the Blu-Ray not the HD DVD camp) but the G4 is not a processor I'd ever want to be encoding HD in. The G4 wouldn't even be up to playing discs. So I think you could do it with a Blu-Ray drive but you shouldn't do it. I hate having to wait whilst an SD DVD encodes HD is at least four times longer. Remember Apple hasn't put a HD spec burner in even it's 8-core Mac Pro yet!
mrtotes

Looking for a external blu ray dvd burner for my mac

looking for a external blu ray dvd burner for my mac

There are plenty of options but I have found that the LaCie d2 http://blu-ray.burnworld.com/burners/lacie-d2.htm works more consistantly. I use Toast 11 mainly for Blu-Ray. The drive does come with a basic verison of the software which is good for most but you need to upgrade to do some serious authoring.

DVD burn error message

I get this error message when I try to burn a data DVD: "Burning the disk failed because communication to the disk drive failed. (error code 0 x 80020022)
I am attempting to use the original drive system (Pioneer DVD-RW DVR 104) and it plays CD's and DVD's without a problem. Thoughts? Jim

just had this problem with a 17" MacPro purchased in Jan 09. Toast Titanium 9 had no problems burning the CD. tried it again in Finder but backed the burn speed down from 24x to 8x - no problem.
I can only assume it is cheap media causing the problem - we have no problems with Maxell CDs at full burn speed (24x). The CDs causing the problems are Verbatims (rated at 1-52x) that have printable surfaces.
hope this helps

G5 DVD burner error message? Help please?

I get this error message when I try burning a 1gb quicktime movie to dvd on my pre installed standard burner. Thanks in advance
the link below is a screenshot of the error
http://www.darkstargraphics.com/dvd_message.gif
Im at a loss and ready to by another
below is the dvd burner profile
PIONEER DVD-RW DVR-106D:
Firmware Revision: A606
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No

The error "internal target failure" appears on PCs using this drive as well, so it appears that it's not a Toast specific error.
However, in my browsing, no one seemed to be able to tell if it was a true hardware failure of the drive, or if it was caused by poor quality media.
I'd try other brands of media and a lens cleaner before flashing the firmware. And, if you do decide to flash the firmware, the current, official firmware for that drive is here. The link in MLCinma's post contains hacked (region free) firmware and is outdated in any event.
Let us know what brand of media you're using and what speed you're burning at.
The DVR-106D has had lots of reports of failures, so it could very well be the drive. At least a replacement DVR-111D will only cost you about $40 - $50.

DVD burn error - SOLVED!

I recently had errors when burning DVDs and noticed many people on this forum shared the exact same problem, but no solutions were posted. However, I've recently solved it, and decided to make a whole new thread so that it is easier for people to find.
First of all, the error is this: Since owning my laptop I've done 1 or 2 successful DVD burns, but then suddenly it wouldn't do it anymore. It would begin but then fail, somtimes at around 42%, other times before it got to 1%. and this happened no matter what software was used. I tried Finder and Toast 8. The error codes output from Toast are as follows:
The drive reported an error:
Sense Key = HARDWARE ERROR
Sense Code = 0x03, 0x01
http://www.bilious.org/filez/forums/Apple/Drive%20Error%2001a.png
Followed by:
Sense Key = ILLEGAL REQUEST
Sense Code = 0x30, 0x05
CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT
http://www.bilious.org/filez/forums/Apple/Drive%20Error%2001b.png
(Thankyou to user: billious, for the images)
The error code you get from Finder is 0x80020022.
Now, the information about my system and my drive are as follows:
Apple MacBook (Intel Core Duo, 2Ghz) in white
MATSHITA DVD-R UJ-857:
Firmware Revision: HBE4
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Now, I know a lot of people here have said "Use highest quality DVDs, your cheap ones are bound to fail!" but in actual fact, it doesn't matter. People all across this forum have said that they've used the most expensive brand DVDs on the market, right down to the cheapest, and it's failed on all of them. Even the Apple brand ones. Here are a just a few that people have tried: TYG03 (Taiyo Yuden 1-12x DVD-R), TTH02 (TDK 1-16x DVD-R) and TDK003 (TDK 1-16x DVD+R). Taiyo Yuden are widely thought of as the highest quality on the market.
Also, I know people on this forum have said "Check the Mac is on a flat surface" and "Check the Mac is at a comfortable temperature". These may be factors, but it's very unlikely and are certainly not how I resolved the issue.
I took mine to my local Apple store and told them about the issue and they said they'd test it and if they found a fault, do whatever was needed. They tested and sure enough, it wouldn't burn so they decided to replace the DVD drive. I tried to tell them that loads of people on this forum said that doing that hadn't helped, but they weren't going to take our word for it, and so they replaced the drive. 2 days later I got a call to say they'd done it but it hadn't resolved the issue (fortunately they'd re-tested it and not just told me to come and collect it!) and so they decided to replace the motherboard. 2 days later they called to say the work was done and it was burning fine, and I can confirm that it now burns full DVDs successfully.
So there it is, a motherboard fault. I dont know why, perhaps a manufacturing error. Anyways, so if you're having this problem, go tell Apple to replace your motherboard (I believe you can send your laptop to them if there isn't a store near you).
Oh, and if you do this and it works (or if it doesn't) please post it here, as it will help keep this solution on the front page of the forum.

Hi Vai,
I'm quite pleased to read your post, I'll even forgive the linking to my error messages because the news is that good.
Any information whatsoever as to the actual repairs undertaken would be very much appreciated, as I am interested in twisting Apple Australia's arm over this issue - my DVD drive may as well not be there. Any information from the service receipt, or if your could contact the service staff for a specific description of the error and service method, I'd very much appreciate it.
Congrats on the repair, and now I've got five months to fight the machine that is Apple to see that my drive actually works.
Thanks.

Sony DVD Burner and 350 mhz AGP not being recognised by iTunes

I managed to get a Sony DVD Burner for my friends Powermac g4 AGP, the sales assistant sais it would be comatible for macs....it installed fine and wa sable to read dvd's perfectly, when my friend went to burn a CD from iTunes it would not work as it seems the drive is not supported. I have tried finidng some drivers all over the sony website for it but to no avail. I don't suppose anyone has any experience with this brand of burner? Any help would be appreciated thanks.

As I recall, Sony's internal DVD burners are made by Lite-On, but as far as the G4 is concerned - the drive's firmware indicates a Sony product. A compatibilty problem for burning a disk occurs, when the CD/DVD drive is newer than the supporting profiles for Apple's Disk Burner software. Have you checked into "PatchBurn?" Other than that, your friend could purchase Roxio's "Toast," which has more user settings than Apple's software.

Just installed 10.4.9 - My LITE-ON DVD burner no longer will burn DVD-DL

I just installed 10.4.9 (I knew I shouldn't have..) and went to burn a Dual Layer DBD with Toast 8.0.1 and it won't burn -- it recognizes the DVD as D/L - but won't write to it (It thinks it does and immediately says "Writing Lead Out"...but nothing was written.
I have tried other burning applications, but no go. However, I can burn DVD Single Layers no problem...
What did 10.4.9 do and how??? I burned some D/L DVDs last night...is this just a coincidence??? Hard to believe it would be...that just after installing 10.4.9 my DVD burner no longer burns DVD D/L!!
Anyone else have this problem?

i have a G4 500mhz AGP mac (upgraded to a 1.6ghz processor via a NewerTech card) with an internal CD/DVD player (not burner) and i have an external LaCie CD/DVD burner (the LaCie CD/DVD burner is only about 4 weeks old and i've burned maybe 8 to 10 DVDs on it)
i have had NO problem reading any DVD disks until just about a week ago.. i had bought a new Graphics DVD and it worked the first time i put it in the DVD player... the second time it would not work... (((this was the start of the problem of the purple-ish DVDs not mounting))) so, i thought i had just bought a faulty DVD, they replaced it and the new one still will not work at all.. the DVD will NOT work in my internal DVD player AND it will not work in my LaCie external DVD burner/player...
the internal drive just spins for a few minutes and the kicks the DVD out... the external LaCie drive spins for several minutes, then i finally get a message saying the disc is not readable.
what i have noticed is that any DVDs i put in will mount as long as they have a silver surface.... if the surface is purple-ish color, those are the DVDs that will not mount and keep ejecting
even DVDs that i have burned on the external LaCie DVD burner will not mount in the internal drive OR the external drive...
as i said, all of the DVDs that will NOT mount are the one's with a purple-ish surface... maybe that has something to do with the problem....
something must have happened somewhere because these purple-ish DVDs did used to work... i even did a brand new install of OS X.4 on a totally seperate hard drive and these purple-ish DVDs STILL would not work...
even booted into MacOS 9.2.2 and the STILL would NOT mount....
ANY info would be helpful...

Mini no longer detecting Sony firewire DL dvd burner

Hello,
I picked up an external sony dvd burner for cheap and it worked fine for quite some time. My mini only has a cd burner so it was a perfect solution.
I was using Toast with it just fine.
Out of no where my mini does not pick it up at all. I know the drive works as I've plugged it in via firewire to my G4 ibook.
System profiler shows under FireWire "firewire bus" and the rest is blank. Could it be my port is gone? I dont think I ever plugged that firewire cable out untill i tried figuring out what was going on.
Any help would be great.

Hi
I had a very similar problem. My Mini G4 did not mount any externaal device, Firewire or USB, nor even the in-built CD Drive.
It is now away for repair awaiting a new motherboard (I am told).
Hope yours turns out to be a simpler remedy.
David

DVD burning no longer working.

Hi there,
I am not quite sure if it is since the 10.4.9 update or the re-install I did a month ago, but DVD burning with Toast 7 or the Finder no longer work.
I can burn CD's with my internal NEC DVD RW ND-3520A drive and I can play DVD's just fine too, but when I try to burn a disc I get this error:
"Burning the disc failed because communication to the disc drive failed. (Error code 0x80020022"
I am using Phillips DVD-R media that I have used before, the firmware on the DVD drive is at 1.04 there is a new Firmware updater but you need a Win2K machine.
But the Firmware update has been out for a while and I have been burning happily until now.
Anyone on the forum have an idea as to what the issue is?
All the best,
Anil.

Hi Dak,
Thanks for your suggestion, unfortunately I have been using Patchburn for a few years now. I had to reinstall my system because of some dodgy software from Vodafone. I upgraded to 10.4.9 from 10.4.8, just like every good OS X user.
It burns fines with CD's it just seems to be a problem with DVD's, maybe it is a media issue, might try a few other brands and see if that helps. again thanks for your advice.
Anil.

Toast 11 DVD burning

Similar Messages

Maybe you are looking for