Toast 11 Pro not working

I'm running first gen Mac Pro with 10.7.5. I have been having difficulty running Toast 11 pro for some time now, probably started happening after an update. So now when I start up Toast it just doesn't load. If I put the cursor over the icon the color wheel appears. It just doesn't load. So I trashed it and tried to reload it off my CD but my superdrive doesn't read it and then just ejects it. I put a CD and DVD in to see if the drive wasn't working anymore but it read them fine. Ever since Roxio joined Corel their customer service has gone to pooh.
Any ideas of what I can do? I'm interested in burning on Bluray. Toast did a great job of this but now it doesn't work.
Thanks.
Ipix

I was going to suggest that you go to the developer's support site from the following link but it just takes me to a Go Daddy offer for that site -- which is not a good sign. https://itunes.apple.com/us/app/voice-camera-pro/id326703606?mt=8

Similar Messages

Acrobat X Pro not working, tryed to re-install and does not recognize Serial Number?

Acrobat X Pro not working, Serial Number not recognized?

Hi lv123321,
Do you have Acrobat only License no or is it a part of suite. If Acrobat X pro is a part of suite then you need to use the suite setup to install Acrobat.
Also if possible could you please private message me the serial no so I can try decoding it.
Regards,
Abhijit

Why does the internet on my new macbook pro not work when my old macbook's does?

Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

Here is your fix .. I have uploaded my properly calibrated profile get it here :
http://www.megaupload.com/?d=YAJL6A9X
And it should go to your user folder/Library/ColorSync/Profiles
if you have one already you can rename either one ..
and then go to system preferences - displays - color to select the profile .
you will get rid of the blue tint while keeping correct color and gamma
This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

THX TruStudio Pro not working (Windows 8.1 64-bit) GT60 0nc - help !!

THX TruStudio Pro not working there is no effects, like doing any thing on THX TruStudio Pro will give no change in the sound
i have the latest realtek sound driver
any help please !

Quote from: adybrasov on 13-January-14, 20:41:25
Have you tried the original one from windows 7 x64? >> thx_pro_nb_w7_3264_10211 THX TruStudio Pro(W7 3264,1.02.11)
I suggest you delete the Windows Registry in connection with THX then restart and try your luck in >>> this case MSI version on the website of your laptop goes. Let me know and I'll give you my kit.
THX TruStudio Pro Settings from windows 7
not working at all on 8.1

Canon file RAW CR2 and mac book pro not working ...?

Canon file RAW CR2 and mac book pro not working ...?
I'm using Digital photo professional software
and i'm using canon camer 5D mark2 and mac book pro 13inch last version
i'm trying to shooting directly by Digital photo professional, Remote shooting but the RAW file con't open by the software or mac preview but with photoshop Cs5 can open
is any one have the same issu ? and how fix it please
What i did :
- update camera RAW
- Update Mac software
- update Digital photo professional
Regards,,
Bandar

Dear all
is there any solution for that ?

Since windows has been update acrobat x pro not working, what to do?

since windows has been update acrobat x pro not working, what to do?

acrobat x pro cs6, windows 7, there are no text massage
i did tried to uninstalling and reinstalling acrobat, but the problem comes
back
the issue is:
i can close to pdf file at working on indesign, but when i want to open the
file the acrobat wont respond, it just not open at all.
2014-02-19 16:23 GMT+02:00 Rave <[email protected]>:
Re: since windows has been update acrobat x pro not working, what to
do? created by Rave <http://forums.adobe.com/people/Rave> in *Acrobat
Installation & Update Issues* - View the full discussion<http://forums.adobe.com/message/6135679#6135679

Adobe premier pro not working on w530

i have w530 and adobe premier pro not working any body can help i increased the ram to 32 gb but still not working

What is it not doing? I have Premiere pro on my W530 and it works fine. I had to edit a text file to make it support the Quadro in the W530 but it works fine.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

Macbook pro not working without battery

my macbook pro not working if i remove the battery
& if the battery is empty my macbook pro not working before charging

Try an SMC reset:
http://support.apple.com/kb/HT1411
You should not run on AC with the battery removed. The MBP should work that way, but the OS throttles back the CPU so running like that is not recommended.

Bluetooth from iPhone 3GS to MacBook Pro not working?

I am having (seemingly) bluetooth connection issues with "some" devices to my MacBook Pro. I note:
* Mouse pairs fine
* iPhone 3GS does not remain connected (focus of this forum question)
Error - after pairing my iPhone 3GS to my MBP I get an error:
The Bluetooth Network is Unavailable
There was an error connecting your device. Make sure the device is turned on and in range.
Notes:
* MacBook Pro details:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro6,2
Processor Name:          Intel Core i7
System Version:          Mac OS X 10.7.3 (11D50b)
Background: Ultimately interested in teethering my iPhone 3G data connection to my MacBook Pro, but for the moment the bluetooth connection won't even remain in place.

nothing in these articles helped unfortunately - some more clarification:
tethering via USB from iPhone 3G to MacBook Pro => WORKS
tethering via Bluetooth => does NOT work, with bluetooth connectioning not staying up
During pairing process:
devices "see each other"
pairing appears to work, then you see that the connection drops out directly afterwards (almost immediately)
on iPhone message = "Connection Unsuccessful - XXX's MacBook Pro is not supported"
on MacBook - it's just the connection in Bluetooth options shows up as not connected
in /var/log/system I see some bluetooth related lines:
Apr 18 19:33:14 Gregs-MacBook-Pro bnepd[18950]: [IOBluetoothDevice instantiateChannel] BluetoothHCIAuthenticationRequested failed (0x0006), so retry
Apr 18 19:33:14 Gregs-MacBook-Pro sandboxd[18966] ([18950]): bnepd(18950) deny mach-lookup com.apple.blued
Apr 18 19:33:14 Gregs-MacBook-Pro bnepd[18950]: [IOBluetoothDevice instantiateChannel] BluetoothHCIAuthenticationRequested failed (0x0006), so disconnect device
Apr 18 19:33:53 Gregs-MacBook-Pro blued[22]: Removing Bluetooth configured device: 00-26-08-23-23-9d
Any other ideas? Is it a physical problem with my MBP? but then again my bluetooth mouse stays connected ok. And in terms of the iPhone well it tethers fine to the iPad via bluetooth....

Need help one USB Port on MacBook Pro not working

Its been a weak now and im getting tired of my MacBook pro USB not reading anything.. It wont read/connect usb drives, IPods/IPhones/IPads, and Android phones. I have tried the PRAM and SMC resets and nothing has worked i even left my Macbook pro off for a whole day. ITS ONLY ONE PORT NOT WORKING, i took it to bestbuy because its closest to me but geek squad just did what i explained above and told me get a USB hub and NO! i want to fix this issue... Anyone has had this happen can you let me know if its because the USB port is no longer working or a software issue... Also i keep getting this notification telling me USB devices disabled draining to much power but i have nothing connected!!
ps- my MacBook Pro is getting very hot fast and it happens when im not even using it, i get home and it very hot could there be another hardware failure i dont leave applications open when i sleep it.

It sounds like you might have a hardware problem. Your best bet is to go to the Genius Bar. The evaluation is free, and they'll fix it if you're under Applecare. Back up your stuff first though.

CS4 - Acrobat 9 Pro not working on Win 8.1

Hello
We have severe problems installing Acrobat 9 Pro from the CS4 Suite. Setup always cancels the installation (see Re: Error 1603 when installing CS4 on Windows 8.1).
However, we downloaded and successfully installed a standalone version of Adobe Acrobat 9 Pro. But the CS4 serial does not work on the standalone version.
Can you send us a serial number that works? We can provide you with the CS4 serial for verification. Please send us an address to send it to you privately.
Thanks a lot!
Simon Sunke

Go to your Control Panel, find the Windows Firewall, after you open that, you need to click on Advanced settings. Click on Inbound Rules, scroll down until you see Java, it maybe listed several times. Right click on the ones that are blocked and select Properties.
On the General tab, you will see a section called Action, you will need to tick the Allow the connection. Apply and then OK, do that for all blocked Java entries.
EDIT: Sorry I missed where you said that it wasn't showing up. Are you looking in the "Inbound Rules"? If so, did you install the 32bit version? Even on a 64bit OS, you should have the 32bit installed. You can also always add the Java entry into
the firewall setting. I will type out how to do that if you need.
I tried to upload an image for you, but the site won't let me.
Now if Java was the only thing not connecting, then you should be good to go, if you still have an issue with Java, then follow the steps again, but this time, you will need to open the Advanced tab and under the Profiles section, check the private box,
apply and OK.

Import from Final Cut Pro not working correctly

I have a very simple project in FCP. (Ver 6) It is a HD clip that is about 5 min long with 7 chapter markers.
I exported the project as an XML file and imported that into Premiere Pro empty project.
I wind up with two assets, a .mov with same name as the .mov in FCP and a sequence with the same named sequence in FCP.
Right clicking on the .mov and selecting "New sequence from clip" creates a new sequence with the .mov on the timeline.
There are no markers.
Right clicking on the sequence asset and selecting "New sequence from clip" creates another sequence with the same name and the .mov on the timeline.
The markers are inside the .mov and audio tracks, not up on the top ruler line where markers appear when manually adding markers.
The keystrokes to move to markers do not work.
The "Clear all Markers" function is greyed out , like it is when no markers exist.
If a "Dynamic link to Encore is performed, there is no markers in Encore.
If you enter chapter markers manually and look at the project file (an XML file) you will see indexes with the chapter points , durations and names as children named "Markers" with attribute"ObjectID='22'.under "//PremiereData"
Following , in sequential order, are subsequent objects "Markers", ObjectID='23" through "ObjectID=n
However, if you look at the project file after importing a FCP project, this same function occurs, except that it is "Markers" "ObjectID=30 with the indexes and marker data 31 through n (further down in the file). This area is empty when adding the markers manually in Premiere Pro.
FYI , the project file is littered with the word "Marker" and "Markers" throughout the file, only their attributes make any node unique.
I am at 99.9 &% finished with a VB program to create / modify nodes, values and attributes, except that the XML date changes format at the node named "//WorkspaceSettings" so I am not able to edit values to make a file that will not crash when opening.
I would very much like the import from Final Cut Pro to work, or someone explain how to work with the nodes under "//WorkspaceSettings"
Thank millions for a solution.

It's a 2007 iMac with 2.4 GHz Intel Core 2 Duo. I had been using Final Cut Pro without any problems right until I upgraded to Yosemite. I'm hoping that upgrading to Yosemite doesn't mean I can't continue using Final Cut Pro - that would be extremely frustrating.

Adobe Acrobat X Pro Not Working, InDesign is Finicky

I purchased CS6 a little while ago and now Adobe Acrobat X Pro is not working at all. This is a major problem because I cannot access PDF files, which is the file type I use most. Also, InDesign doesn't save my files correctly and sometimes just shuts down without notice. I use those two programs the most so I'm not too sure what problems the other programs potentially have. This same problem happened to my co-worker and she was emailed new download codes and now CS6 works perfectly for her.

Hello emthree
You will have to contact Adobe Support regarding this - http://helpx.adobe.com/in/contact.html
~Deepak

Acrobat Pro not working in Office Word 2003

Hi!
Im having troubles with my Acrobat Pro 9.0 in office 2003.
The Acroat plugins in word are not working, the "acrobat-PDF" button is not working at all, when i select or press something in the dropdown menu nothing happens. the workaround on saving my files is to go to File > print as a PDF document.
After i finish typing my document and add a few links to webpages and "mailto" links and save/print it to a PDF file, some of the links work and other dont.
So does anyone know how i can get all my links to work? or even be able to use the "acrobat plugin/buttons" in the word program?
The guy on suport phone told me its a setting problem that needs to be adjusted.
TY in advance / Nkla

Nikola,
Have you checked the properties of the Adobe PDF printer in your Printers and Faxes menu? You may need to make some changes regarding the settings here.
Jim

MacBook Pro not working.

Hello there.
I have a MacBook Pro that I accidently spilled my glass of milk over. Right after I spilled it, i cleaned it up, but I believe some of the milk went down the space between the keys. As normal all hardware etc works as before, but some of my keys like shift and right arrow does not work anymore.
Is there anything I can do to fix this problem?

Liiquid contamination is often fatal for computers. You can take it to Apple for a free diagnosis and estimate of repairs. Often the repairs would be expensive and people consider a replacement instead of a repairs. You can probably salvage the disk to recover the data on it.

Right click on XP under BootCamp with new MacBook Pro not working?

Is anyone else seeing this on the new MacBook Pro? (I have the 2.53 model):
I installed WinXP via BootCamp (BC). All went well. I installed the drivers from the Leopard install disk, which seemed to have the latest everything (BC 2.1.1?).
There is a "secondary click" function under the BC control panel in Windows for the trackpad, but it doesn't work at all.
Ctrl-Click also does not work. All other clicking is fine, but it's only left clicks that are allowed.
This reminds me of my original MacBook Pro and Boot Camp beta...

Three fingers and physical click. It's the same in Vista (except Vista's LAN driver works).
Eagerly awaiting the next version of Boot Camp! It's clear it was rushed, from both this and if you insert the CD and autorun (in Vista at least) it pops up with a couple of utilities for a Macbook Air.

Toast 11 Pro not working

Similar Messages

Maybe you are looking for