Toast 7 Not writting lead out!

Hello,
I'm having some issues with Toast 7 stalling while writting the lead out. I've tried getting an answer from Roxio but the online help always says that there are no agents available.
I'll be trying to write a DivX file or make my own dvd from those avi files. It will write all the way to the end where it says that it's writting the lead-out, then it just stays there. I've been told to not try cheap media which i've gone against and bought the good stuff (sony and imation) and it still stalls! Even when the disk is only half full it stalls on the lead out. So it's not the disk space. My external dvd writter has worked many times in the past. It seems that since my last update & wipe I did it's started doing this again? I pray that there's a patch or something out there for it. or somthing, it's pretty frustrating.
I need some help as soon as possible. Please help me.

DOES NOBODY HAVE ANY HELP FOR ME??!!
I've attempted to contact Roxio and i've looked and posted on the Roxio board. Their online support chat never works, i've updated my firmware and still the issue continues on good media (not cheap).

Similar Messages

IDVD (and Toast) never complete writing lead-outs

Hi,
I've noticed occasionally that when using Toast 7 and iDVD 6 that during the writing process, the application in question persists on writing the lead-out. I understand what the correlation between lead-out and DVD playing length are. However, the drive just spins and spins for hours if left to do so. It is a Pioneer DVR-109 (not Apple blessed). The media is Memorex DVD-R 16x and I frankly haven't spent time trying other media yet.
I'm unable to halt the spinning by any means other than rebooting the computer. Usually, the result is fine. Sometimes the DVD doesn't conclude viewing properly.
Any thoughts? Thanks!

Yup, the Memorex disks have been a bit problematic. I was able to burn to an image with iDVD.
I happened to have some TEON DVD-R 8x media a friend gave for another project, and that worked fine. The Memorex 16x media burned at 8x had the same issue.
I had had poor experiences with Verbatim media in the past. But co-workers have raved about the DL disks and the single-layer ones lately. Perhaps I will give them a try.
Thanks!

CS3 not creating "lead out" ?

I've just burned a 2 minute DVD through Encore CS3. I looked at the purple data side of the disc when it was done, and it doesn't look like it burned the "extra data" to make it compatible with most players.
Does anyone know what I'm talking about? When I first starting making DVDs (2003 or so) I learned that if the DVD was not burned to a certain point on the disc, it might not read in certain players. So, Encore would burn past the point where my data ended, which made it compatible with more players.

aid is right....
Today I burned my first CS3 project, which was 6 mins long at approx 500MBs. The disc was a Verbatim DVD-R, and I too was surprised that the DVD was not burned up to the 1GB minimum.
I've a fair amount of experience in using Encore (from version 1), and so I was surprised to see this. I even double checked the disc to see if I'd accidentally picked up a +R but I hadn't.
We may have to make just an iso image from Encore and burn with Gear Pro Mastering Edition that we also have....
Anybody else got this problem?

Blu-ray discs don't seems to write a 'lead-out'. Help!

Hi,
I am using Premiere Pro CS4 with Encore CS4. Up until now I have always used DVD's and not blu-ray discs and have never had a problem. I now film in full HD and would like to be able to build blu-ray discs in Encore.
I import to Encore through dynamic link, and set my blu-ray project to PAL 1980x1080, 25fps - the same as my original footage and premiere sequence. The disc appears to burn ok, and you can see there is data on the disc. However, the disc is rejected by my sony blu-ray player, and both the blu-ray disc drives in my PC. It keeps telling me that the format is unsupported. I have tried lowering too 1440 and even 720 and it makes no difference at all. I made sure the region was correct too - region 2 (as i'm in the UK).
I have tried importing very short sequences so that I can watch the process, and I have noticed that unlike my DVD discs, the blu-ray doesn't seem to write a 'lead-out). It says it's complete but it's almost as if it doesn't finialise the disc for playback.
I am so confused, and at this stage rather frustrated! Has anyone got any pointers as to what may being going wrong here?
Thanks,
Cath

Have you applied the special update?
For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS

I need to find out dollar amount on iTunes "Give any amount" gift cards I purchased, store clerk did not write down the amounts

I need to find out dollar amount on iTunes "Give any amount" gift cards I purchased at CVS, store clerk did not write down the amounts when I purchased.

Without scratching them off to get the numbers and redeeming them there is no way for you to do so. You could go back to CVS and see if they can get the data from their computer or see if your receipt helps.

Writing Lead-out takes forever

Well, this did not use to happen but now whenever I try to burn a DVD in my MBP using Toast Titanium 7 - data or video DVD, about 4G worth of material - the programme takes forever to write the lead out. Also, the burning itself is very slow (I'm not talking compressing here. Just burning). I've tried different brands (the same brands I've been using for ages) - Sony, Maxell, Benq - but it's been slow with all of them.
I don't think this is an issue with Toast since I can burn DVDs as usual using Toast in my good ol' iMac.
Has anyone experienced something similar? Does anyone know what's happening?
TIA
Dan

I have been having the same problems with the lead-out, but it is inconsistent. It took forever for me to finish a burn in DVD Studio Pro, then I used popcorn to rip a couple of copies of it and the first copy burned as usual, the second took for bloody ever to finish out. Not sure what the deal is. I never had this problem with my 2.16 MBP CoreDuo, they are new to my Core2Duo machine. This was not the first DVD burning I have done, but the first time I have encountered the problem. Had burned from iTunes and Popcorn previously without problems over the past week. Not sure what the problem is, but if anyone figures it out, I would love to know!

Writing lead-out never finishes

Weird problem.
Project burns correctly, but iDVD 5 will sit on "Writing lead-out" forever. The first time this happened, I forced-quit iDVD 5, but could not eject the disk. I waited about 30 minutes before I forced-quit, then rebooted the system. I was able to eject the disk than, and it worked perfectly in my set top DVD player, as well as in the DVD player app.
Tried to burn again, this time let iDVD run overnight. Woke up this morning to see it still "writing lead-out". As before, the disk worked perfectly, but it required a force-quit/reboot in order for me to eject.
What's going on, and how do I fix it? This is a new clean install of 10.4, just wiped the system last week.

'Writing lead-out' can take a long time - especially on 'short' discs - but overnight is too long.
I suppose you could have a media problem or write speed problem (either of which can produce lots of burn errors).
Have you tried creating a disk image instead of writing directly to writable media?

DVD Burning Freezes @ writing the lead out !

Has anyone experienced this? I burn disc all the time with no problem i have used all types of media, Apple disc are the best. but now it freeze at the lead out in DVDSP, Can any one help?

I can't help, but want to add my thoughts: mine used to work fine, now, when I get to the end, I get error messages; I've tried both native burning to the G5 and Toast. Since this is your thread, I'm going to post a separate one, so as not to detract from those who may know your specific difficulty, but boy they sound alike and I wanted to just say -- it's seems to be not exactly an uncommon problem. These are my error messages, I'm curious if they are the same as yours:
Toast:
The drive reported an error:
Sense Key = ILLEGAL REQUEST
Sense Code = 0x72, 0x03
SESSION FIXATION ERROR - INCOMPLETE TRACK IN SESSION
G5:
This disc did not verify correctly and is unreliable. Because this disc is unreliable, discard it and try again using a new, blank disc. (Error code 0x80020063)

DSP hangs on writing lead out

Has anyone else experienced this? I'm simply burning a disc with a :30 clip as the sole title and it's the first play. The encoding seems to go along fine, but the writing lead-out takes forever. When I force quit the app, I can't eject the disc without rebooting. When I test the disc, it plays fine.
Am I doing something wrong or is this a software issue?

Has anyone else had trouble with certain brands of media?
You can find here info * about quality media *. You can use Toast to read the manufacturer ID in your media to double check its not a fake one. Try to use allways first quality media.
Besides that, you must find your best combination of madia brand + burner. In my personal case, I found the best results using Sony DVD-R . . . the ones that don't work for you !
You can try * Creating Disc Image in DVDSP * and burning with Toastand/or Disk Utility.
Hope that helps !
Alberto

Error 1406.Could not write value Adobe ARM

Hi all,
I have tried to install the new version of Adobe Reader XI, but I keep getting the following error messages.
I have tried to follow suggestion by others on the web as to how to sort this problem out.
I have uninstalled adobe reader and restarted the computer.
tried to download again but still get the error message.
The full error message I got was,
Error 1406.Could not write value Adobe ARM to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
I went to the registry HKEY_Local_Machine and then to the above location.
in the right hand side of the registry editor is listed ADOBE ARM "C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe"
I have tried to delete this entry but my system wont let me.
I am running Windows 7 ultimate 32 bit
I have 4 Gb RAM
I have an Intel core2 Quad Q6600 @2.40Ghz
I run Zone Alarm Extreme Security with virus protection.
I hope someone can help as I want to install Adobe Reader.

Truthfully, I don¹t know the difference.
Okay here is what happened:
I purchased a new Mac because my old one was on the fritz. They put all of
my old programs on my new computer including my old Adobe Acrobat 7.0
Standard. Since I purchased a newer computer, I gave the old one to my
assistant. But the Apple people replaced the hard drive on the old one, so
none of the old programs were in the system. I purchased Adobe Acrobat XI
Standard for the new computer and figured I could just reload the old
acrobat on the old computer. But I had to buy new windows and parallels
programs in order to get the parallels program to work on the old computer.
Here¹s what it looks like:
New Computer:
Old Windows
New Acrobat
Old Parallels
Old computer
New Windows
New Parallels
Old Acrobat
How much more messy could this get?
Maybe I should put all of the old stuff on the old computer and all of the
new stuff on the new computer?
Or, maybe I should just update everything? Prior to this everything worked
fine. . .
But, what do you think?
Dionne L. Wade, Esq.
Law Office of Dionne Wade
1301 Main Avenue, 2nd Floor
Clifton, New Jersey 07011
Office 973.340.4662
Fax: 973.340.4775
INTERNET CONFIDENTIALITY NOTICE:
This transmission is intended only for the use of its indicated recipients
and may contain information that is privileged, confidential and exempt from
disclosure under applicable law. If the reader of this transmission is not
an intended recipient, you are hereby notified that any dissemination,
distribution or copying of the transmission is strictly prohibited. If you
have received this transmission in error, please immediately notify us by
telephone (collect call if long distance) and/or by e-mail, delete the
transmission from your system and destroy any printed copies which you may
have made of the transmission.

Media Encoder "Could not write XMP data in output file." issue

Greetings,
We have invested a great deal of money and time into a brand new editting system and we need some help with adobe media encoder. We are trying to export some of our projects and we keep getting the same error. Here is the entire log of errors:
Could not write XMP data in output file.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_6.prproj
- Output File: M:\acura_rooftop_43_draft_1.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:17:23
2/4/2010 1:42:28 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_7.prproj
- Output File: C:\Users\Ramius\Desktop\acura_rooftop_43draft_1.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:02:09
2/4/2010 1:54:21 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_9.prproj
- Output File: C:\Users\Ramius\Desktop\acura_rooftop_43draft_1.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:16:04
2/4/2010 2:19:49 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_10.prproj
- Output File: C:\Users\Ramius\Desktop\acura_rooftop_HD_draft_1.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:01:38
2/4/2010 2:30:31 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_11.prproj
- Output File: C:\Users\Ramius\Desktop\acura_HD.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:00:38
2/4/2010 3:19:31 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_12.prproj
- Output File: C:\Users\Ramius\Desktop\acura_HD.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:01:08
2/4/2010 3:31:37 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_17.prproj
- Output File: C:\Users\Ramius\Desktop\acura_HD.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:15:31
2/4/2010 4:21:06 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\Acura Spot 011410_CS4_1_19.prproj
- Output File: M:\GRAPHICS\cow_graphics\acura_HD.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:00:24
2/4/2010 5:16:54 PM : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_16.prproj
- Output File: C:\Users\Ramius\Desktop\mxf.mpg
- Preset Used: 1440 x 1080i 29.97 High Quality
- Video: NTSC, 1440x1080, 29.97 drop frame [fps], Upper, Quality 4.0
- Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 [Mbps]
- Encoding Time: 00:05:08
2/23/2010 12:12:40 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_18.prproj
- Output File: M:\AVI\ihigh_avi\GAR\Marines\marinespromo_2009.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:04:00
2/23/2010 12:26:54 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_19.prproj
- Output File: M:\AVI\ihigh_avi\GAR\Marines\marinespromo_2009.avi
- Preset Used: NTSC DV
- Video: 720x480, 29.97 [fps], Lower, Quality 100
- Audio: 48000 Hz, Stereo, 16 bit
- Bitrate:
- Encoding Time: 00:05:08
2/23/2010 12:51:01 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_23.prproj
- Output File: C:\Users\Ramius\Desktop\allhdtest2.mpg
- Preset Used: 1440 x 1080i 29.97 High Quality
- Video: NTSC, 1440x1080, 29.97 drop frame [fps], Upper, Quality 4.0
- Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
- Bitrate: VBR, 1 Pass, Min 4.00, Target 15.00, Max 18.50 [Mbps]
- Encoding Time: 00:04:20
2/23/2010 4:23:46 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_27.prproj
- Output File: C:\Users\Ramius\Desktop\Sequence 07.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:09:11
3/2/2010 3:21:19 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_28.prproj
- Output File: C:\Users\Ramius\Desktop\Sequence 07_1.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:09:00
3/2/2010 3:34:47 PM : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Ramius\AppData\Local\Temp\ihigh_CS4_HD_29.prproj
- Output File: C:\Users\Ramius\Desktop\Sequence 07_2.mp4
- Preset Used: HDTV 1080p 29.97 High Quality
- Video: NTSC, 1920x1080, 29.97 [fps], Progressive
- Audio: AAC, 160 [kbps], 48 kHz, Stereo
- Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
- Encoding Time: 00:10:22
3/2/2010 4:41:03 PM : Encoding Failed
Error compiling movie.
Unknown error.
We absolutely need to fix this issue ASAP, we are in a major bind until we can resolve this issue. Thanks a bunch.

We are using Windows 7
dual quadcore intel xeon processors 8gb ram
10000rpm internal drives. quadroefx 1800 video card
The drive is 4tb
We have tried exporting to many different locations with no luck
Its a very nice video editting system. We just need to figure out this exporter

Windows 8.1 Keyboard Making a Clicking Noise and Not Writting

My computer was working fine, But when I tried to write a message back to a friend on facebook, Every time I made a Key Stroke I would hear a clicking sound come from my computer and nothing would be typed on my computer, I have tried everything I could
think of to fix this problem but nothing has worked, When I hold down the Key after it clicks a second time it will type the letter out on the screen, But I can not write messages like that, it would take me an hour just to right a few words, I am using Windows
8.1 Pro.
Any Suggestions???

This may happen if Filter Keys are on.
Open Control Panel > Ease of Access\Ease of Access Center > Make the keyboard easier to use
Here scroll down to "Turn on Filter Keys" option
De-select "Turn on Filter Keys"
Select the "Apply" button and "OK"
S.Sengupta, Windows Entertainment and Connected Home MVP

Availability check should not be carried out in Quotation VA21

Hi,
While creating the quotation we want that availibility check should not be carried out when user enter the material code on VA21 screen, as per the material lead time system should directly set the delivery schdule date, as in many cases if some other user is working on the same material then system save the quotation with confiirm quanity as zero in the schdule line, thsi we want for only one lant. what setting can be made for this.
regards,
zafar

how to know all the categoru which are applicable in quotation
For this, first you need to identify what item categories are assigned to quotation which you can find in VOV4. Next for these item categories, you need to list the relevant schedule line categories from VOV6
G. Lakshmipathi

Hello I have a problem I can not write in Arabic in Tor BlackBerry 9630 4.1.0.40 (platfrom v4.1.40)

Hello I have a problem I can not write in Arabic in Tor BlackBerry 9630 4.1.0.40 (platfrom v4.1.40)

i want those dukes, lol.
import java.util.StringTokenizer;
import java.util.ArrayList;
public class StringTokens{
public static void main(String[] args) {
     new StringTokens();
public StringTokens(){
     String change = "10 20 30 40";
     ArrayList changenumbers = new ArrayList();
     StringTokenizer st = new StringTokenizer(change);
     while(st.hasMoreTokens()){
     changenumbers.add(st.nextToken());
     if(changenumbers.size() > 0){
     int[] numbers = new int[changenumbers.size()];
     for(int i = 0; i < changenumbers.size(); i++){
     try{
     numbers[i] = Integer.parseInt((String)changenumbers.get(i));
     } catch (NumberFormatException e){
     numbers[i] = 0;
     for(int i = 0; i < numbers.length; i++){
     System.out.println("Number: " + numbers);

RSEOUT00 failing with "Could not write IDoc to file" TPRI_DEF table

Outbound Idoc processing fail with the following error:
Could not write IDoc to file
Message no. EA299
Diagnosis
The system could not convert data from the data record 000027.
Procedure
Check the port definition of the receiver port.
You can use the "Continue despite conversion error" option to write the IDoc to the file from transaction BD87 with replacement characters.
Short dump indicate that there is a some junk character in th e TPRI_DEF for program SAPLSPRI that it is unable to convert.
I have set the flag on the we21 port to "continue despite conversion error" and that seem to help, but I would like to figure out how to fix the junk characters from coming through from the TPRI_DEF table.
This is what shows up in the short dump after RSEOUT00 is run.
TPRI_DEF                                   / /       : :     00002932
    010GV21            \0\0\0\0\x0006āȂ耀㐱〲\0\0嬇\0ሟ鴂푎眩\x0802儔잏퉓
I do not see any entries for area "GV" in the table, there is one for "GF". which has no user assigned to it and it is of key version 21.
I am not sure if the table is supposed to have an entry with no user assigned?
thank you for looking at this issue .

HI Jurgen,
we have the same issue, chinese charecter is in PO text header. so facing error. If we click unicode format then it works fine as my testing in development.
I just want to knom what is the impact if i clicked directly unicode format ?( with refernce to your reply above " have you set the Unicode format flag directly above in WE21?" )
I doc is going from SAP sytem - (PO information )
Pls adivce..
waiting for your reply..
Thanks in advance

Toast 7 Not writting lead out!

Similar Messages

Maybe you are looking for