Toast with a Blu-ray external writer?

Hello everybody!
I am very frustrated because I just got the Samsung writer for Mac and Windows...and is not compatible with Mac...so a waste of money, and now I need to buy a real Blu-ray DVD burner for Mac...
I see a lot of people using Toaster...my question is, and is stupid at this point (sorry)....If I get the software online from Toast, do I also need to get the writer device? it comes with it? IF NOT, CAN i JUST USE THE SOFTWATE FROM TOAST AND THEN THE external BLU-RAY WRITER FROM SAMSUNG?
THANKS TO ALL!

Sure you can remove the DVD burner and put in a SATA BD-RW drive, or add the BR burner. There are 2 5.25 inch bays and only one is occupied. You will need software to watch BluRay movies and burn Blu-Ray media but it will work fine.

Similar Messages

  • Macs or mac mini work with blu ray external drives even XL DISC CAPACITIES

    macs or mac mini work with blu ray external drives (BURNERS) even XL DISC CAPACITIES like 128GB?

    https://discussions.apple.com/docs/DOC-2881

  • Encore CS4 does not recognize Blue Ray External Driver

    I just bought a LG blue ray external drive writer which comes with Cyberlinks SW. From Premiere, I opened Encore to burn (build) a sequence on the LG Blue-Ray burner, but it does not work: - In En Project setting, the “Player” is grayed-out and only “Adobe Player” is displayed. - In En Build tab, when I choose the Format as Blue Ray and Output as Blue Ray Disk, the Build button is grayed out and Recorder shows None Found. However when I change the Format to DVD, the Build settings automatically change and the Recorder LG Blue Ray is shown. How do I make En to recognize the LG Blue Ray and burn in Blue ray format? Thanks, Vlad.

    There are many threads in the Encore forum regarding reasons that burners are not seen. Most of these problems can be traced back to specific software, and most of the rest have to do with how the hardware is set up. You can find most of these in the main forum, and the Burning DVD sub-forum, with a Search.
    First thing that I'd check is that your OS sees your hardware. In Windows, Control Panel>System>Device Manager. Check here (or within your OS) to make sure that it's just not a bad installation.
    Good luck,
    Hunt

  • I have a new iMac 27 and a new Blu Ray external drive.

    I have a new iMac 27 and a new Blu Ray external drive. What is the best way to burn a BluRay disk? I read about TOAST etc but they are getting bad reviews. What software is the best? Im running mountain lion of course. Anyone know of good software to burn this type of disk that ACTUALLY works?

    Okay, a couple of things:
    I still use (mostly) an old version of iMovie because it was/is the only version which will process footage losslessly. However, the newer versions are okay - just do not use the automatic share option, but use  the export to quicktime option where you have many options as to quality, size, etc:
    You will wind up with a .mov file you can drag into Toast to burn (or iDVD to add menus and burn). If in iDVD, you can either burn directly (but not bluray) or make a VIDEO_TS folder which can be dragged into Toast - I also use that if I want to keep a copy to burn later as it has all the necessary files so you can ditch or archive all your clips, etc.

  • Re: Satellite A500-1DN - Blu-Ray disc Writer needed

    Hi all!
    My problem is that in my latop i have a CDDVDW TSST TS-L633C writer.
    With this i can 't record or play blu-ray content.
    Is this possibility to get a blu-ray disc writer in my laptop from toshiba? If yes, how much does it cost?
    Thanks in advance!
    atibrd

    Hello
    Unfortunately I cannot give you presice info about that but what I know is that just several Toshiba notebooks are delivered with Blu-Ray disc drives and I was not able to find any info about Blu-Ray driver used on A500.
    On my Satellite P500 I have Mat****a BD-MLT UJ240ES and this drive has BD read and write function. I dont know if you can use this ODD on your notebook model (compatibility).
    I recommend you to contact Toshiba service in your country and ask for help. They should know if you can use this ODD or not.
    Price? Google!!!

  • Blu-Ray reader/writer

    Hi,
    I am looking to purchase 2 Blu-Ray reader/writer units in order to archive off data from Fileservers.
    Can anybody recommend a suitable product? I guess reliability is more important than speed.
    Thank you.

    OS X doesn't support Blu-Ray very well at all.
    Any and all optical media is not considered a good solution for archiving data.
    I suggest that you looking to using disk drive instead.
    |___________________
    Allan

  • How to get my iPod Classic 160 to work with my blu ray disc player

    How do I get my iPod Classic 160 to work with my blu ray disc player?

    Whats the model of the blu ray player?
    I'm assuming you would have to to buy a dock or AV cables that connects to ipod and correspond with the model of player.

  • FD Trinitron WEGA KV-30HS420 problem with Sony Blu-ray players

    I have a Sony FD Trinitron KV-30HS420 television, which has worked very well over the last 11 years or so.  I've owned a Sony BDP-S780 Blu-ray player for a few years, and it has worked very well with my TV.  I believe I updated the firmware on the blu-ray player a month or two ago, to the M07.R.0631 version from December 2014.  When I plugged a USB flash drive into the player - one I've used several times before successfully - the screen went black.  The only difference I can think of is that I created folders on the USB flash drive, and put the mp4s into the folders.  I think I may have had a similar problem with the blu-ray player a year or two ago when I also used folders on the USB drive, but I was able to fix the problem by unplugging the player and rebooting.  That did not resolve this issue. Now, if I try to turn on my player, which is hooked to my TV via HDMI, the "Sony Blu-ray" symbol appears as usual, then the thin blue line that stretches partially accross the screen horizontally, but at the stage where the screen will usually flicker and the blue line will expand to fill the whole length of the 16:9 screen, the screen instead turns black.  It appears the player is still functioning (as I'll explain below), but the TV is no longer able to process the signal. I spent several hours with Sony tech support going through everything - checking the connections, swapping HDMI cables, lowering the resolution on the player, and changing other player settings, but I still have the same problem.  If I hook the player up to a newer Vizio HD television, everything works fine - which is why the player seems to be functioning ok.  If I hook my HD DVR to my television, it continues to work fine as well - so I don't think it's a problem with my HDMI connection on my TV.  It appears to be a communication issue between the blu-ray player and the TV. I have been meaning to buy a second blu-ray player anyway, so I purchased a Sony BDP-S5500, thinking that might resolve the issue.  But the exact same thing happens when I plug it into my Sony TV.  That blu-ray player also works fine with the newer Vizio TV.
     I spent several additional hours with Sony support making sure there wasn't an issue with the new Blu-ray player.  This included about an hour of hold time, and being forwarded to over 4 different support staff, including an "escalated" forward to a "Level 5" support staff.  I had to repeat the issue several times to the staff, including Yeng (Employee #C8WZ), Charlie (Employee #C75Y), and Mel (Employee #C822).  The first staff I spoke with - Eric - told me he'd call back the next day after checking compatibility issues.  Neither he, nor any other Sony staff, called back after 2 days, so I called support again - they had no record of my conversation with Eric, and I had to start the whole process over again.  The Sony phone support so far has been very disappointing, to say the least. Any help would be appreciated.  I'm guessing that by plugging in the USB with the folder structure, it somehow triggered a setting on the older BDP-S780 blu-ray player to use an updated setting - a setting that is common with the software on the newer blu-ray player.  Has anyone else had a similar issue with one of the FD Trinitron WEGA tvs?  Thanks for your help.

    Your older TV is not capable of displaying either 1080P or any progressive program at tthat. On a standard definition (SD) non-progressive CRT like yours, blu-ray is a complete waste. Even if it could accept the signal, it wouldn't look any better.
    If you find my post useful or informative, please click the icon below with the plus sign and star to give kudos. Thank you!

  • Replacement of Superdrive with internal Blu-Ray Rewriter?

    I have an older Mac (Mid-2007) and I wanted to change the pre-installed Superdrive with this Blu-Ray internal rewriter, http://www.aliexpress.com/item/New-Arrival-100-Original-Slot-Load-BD-DVD-Rewrite r-UJ-225-PATA-Blu-ray-disk-Burner/168556
    But I believe that the Superdrive is 9mm, would this work, (as the drive is 12.7mm).
    Any help is appreciated, Thank You

    To my knowledge Apple Mac OS X does not support Bluray at all. There may be an aftermarket program you could use but I'm not sure.
    Also I doubt you will find a BR drive that will fit inside the space allotted for the Superdrive.

  • Satellite A200-21t CD/DVD drive replacement with an Blu-ray reader

    Hi,
    I have a Satellite A200-21t notebook that came with the mat****a UJ-850 drive.
    My original drive isn't working anymore...
    I'm planning to buy a new one, but i would like one that has a buit in Blu-ray dvd reader.
    I heard that not all players work with Toshiba's laptops, so i would like some help to find a bluray drive that would work with my notebook.
    Two drives caught my attention:
    the Panasonic UJ-120 and the Sony BC 5500A.
    Do these drivers work with Toshibas?
    Does anyone has another suggestion?
    Thanks very much for the help!

    Hi
    > Do these drivers work with Toshibas?
    I think you will have to test it yourself.
    As far as I know Toshiba didnt mention anything about compatible Blueray drives for Satellite A200.
    The point is that not all drives are compatible due to different master/slave/c-sel settings.
    Using not compatible ODD you will get an IDE #1 error message and the drive will not be recognized by BIOS.
    But I read here in the forum that some guys managed to upgrade the own Toshiba units with a blue ray drive
    Therefore Im thinking that youve got a good chance to upgrade it.

  • Lacie Blu-Ray external burner with DVD Studio Pro?

    Is there a way to burn my HDV footage as MPEG-2 to a disk image and burn it on a Blu-Ray disk on the Lacie external drive?

    No, you can burn a movie disc but - and I'm not 100% certain of this - I believe you'll need the Blu-ray add-on (it's a software download) for Toast 9 (the version that comes with the burners) in order to burn a movie disc.

  • What Blu-Ray Burner/Writer?

    Hi All
    I'm going using FCP 7 to create some Blu-Rays, i need to purchase a Burner/writer. I've searched a few discussions but they are all from the US and when I google their recommendations the products are hard to find in the UK!
    Can anybody recommend a BRW which will work directly with FCP7 budget is £200/300
    Any help greatly appreciated.
    Thanks
    Martin

    Hi,
    I use an LG BE06LU10 Super Multi Blue .. it does not say anywhere on the box or site that it is compatable with MAC OS but it works with FCP7 and indeed I have Toast with the BluRay plugin and it works great from there too. Have a look here http://www.google.co.uk/products/catalog?hl=en&biw=1440&bih=780&q=LG+BE06lu10&um =1&ie=UTF-8&cid=16726374001672668744&ei=7xKzTMSYMs6L4Ab9puX5BQ&sa=X&oi=productcatalogresult&ct=result&resnum=1&ved=0CCYQ8wIwAA#ps-sellers
    By the way I also use this drive to burn LighScribe dirves (DVDs). I first saw it on www.MACVIDEO.TV in 2008 ! look here http://www.macvideo.tv/dvd-authoring/reviews/index.cfm?reviewid=101802
    Hope that helps you.
    Jim
    Message was edited by: JimKells (typos corrected)

  • Backup is at 42% with 3-Blu-ray(25GB) something is very wrong.

    About 3 to 4 month ago are computer downloaded Adobe 11, but could not install. A sercurity message from Norton 360 premier said their was a problem, so I called Norton and they said to call HP support. I called HP support and told them what happen and they remotely fix the problem, I thought. To make a long story short they had after multiple remote sessions connected a HP personal media drive(1TB) to the c: drive(1TB) mirrored E: drive(1TB) and I have 500GB HP Pocket Media Drive. I was told to buy a extenal harddrive which I did, 750GB in size, then another one at 1TB in size they ar both full, so I'm using 25GB Blu-ray disk for backups. I 'm not teck savvy which I told HP support and all I wanted was to save Data, Pics, Docs and personal information. Some teck savvy friends told me to buy two new internal hard drives and get the HP Recovery Disk and start all over. Then take the harddrives and have a professional extract all recoverable Data, Pics, Docs, and any other personal information. Personally I think I've been hoodwinked. Second, I'm having problems with the wireless network. Called HP support they told me it was AT&T U-verse problem so I called AT&T they check the line, modem and router and they said everything check out aright, but they said we are going to send a replacement. I called HP support told them what AT&T said and the spent 3-4 hrs. and told me there is something wrong with the printer and they are sending me a re condition replacement.

    Hi,
    Please post the exact HP product number for your PC.  What operating system are you running?
    Mirroring hard drives is good for redundancy but not for increasing space.  If you are taking frequent backups then you don't need to mirror the hard drive.
    Part of the given advice is partially correct.
    Using a program that is capable of taking differential backups would allow you to maximize your external storage devices. Once the external devices start reaching capacity and you don't need the older versions of the data then just reset the backup set and start fresh by creating a new backup set.
    Unless you are using BD-RE then cost and backup time is something to consider.  I would recommend that you only use BD media for write once archived data.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Can I replace my optical drive with internal blu-Ray player?

    Basically what the question says. I have a MacBook Pro mid-2009, and I'm wondering if I can replace the optical drive with an internal blu-ray drive.  I would want to be able to read and write to regular CD and DVD still though, that's a must. Also, if there is an internal drive I can put in, will OSX Mavericks support playing a blu-ray movie just because my computer can read it?
    Thanks for any knowledge or advice you guys can offer!

    No.

  • Set up HP bd340i Blu-ray Disc Writer to view a 3d disk

    I have a bd340i read write blue ray disk drive. I am using windows 7 with an i7 CPU 870 processor.  I want to be able to get a 3d monitor and watch 3d movies and play 3d games.
    When I load a 3d disk into the drive, it ejects the disk with a message saying cannot be read. Guessing I probably need a specific driver from HP to make this work. Any help?

    Hi,
    Actually the graphics card makes the decision, even the ODD can read the 3D dics, the monitor can display 3D images but the graphics card can't. What do you have to do ? Upgrade the graphics card ? Good luck.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Re:Remove Recordset in FCC?

    Hi All, I am working on File to IDOC scenario where I am getting error in Sender File CC. I see the payload contains recordset where in my DT,MT I didnt mentioned any recordset in my strcuture: DT is as below: DT_DATA --Row Field1 Field2 In payload i

  • Gnome-panel always crashes after update

    Everytime, and yes i mean everytime I run a "pacman -Syu" and reboot, gnome-panel just crashes upon loading. If I kill it and restart the panel, it does the same thing. The only way to resolve this is to run "gconftool-2 --recursive-unset /apps/panel

  • Multi Query Reports

    Hi! Can we have multi query reports ? reports displayed in Frames in a report??????? Imran

  • Setting loop point on a menu

    Is it possible to set a loop point at a specific timecode on a motion menu? When I try to set a point or use the up and down arrows it doesn't move frame by frame, it moves 10 to 15 frames at a time. I am working in PAL

  • [workflow] create result log

    Searched for examples , but could not find a clear one... Created a workflow in owb where executing a mapping and send a mail. Now i want to select the sum result of the paping result into a log file. This file must be written in a local directory or