TOC and playbar area - Adobe Captivate6

I would like to be able to add buttons (smartshape used as button) into the TOC area and/or the recorder playbar area (playbar hidden).
Is it possible to "script" your own controls within either of these sections? say, instead of using default playbar of Captivate6

If you know enough ActionScript 3 you can create your own playbar. The TOC is a different matter. I haven't seen that done by anyone other than Adobe.

Similar Messages

TOC and playbar free-float when played in IE9

I have this Captivate 7 session that I have published in HTML5.
When I play it in IE9 and i resize the screen, the TOC and playbar become undocked and are free-floating, while the session is resized.
This cause the playbar to end up floating in the middle of the screen at times, and the TOC becomes disconnected to the session, too.
What causes this?
Regards,
George

Hi Rod,
Thanks for responding.
I didn't actively change the width setting, I just went with the default. It's set at 250.
What would you recommend it be set at?
And btw, do you know what Alpha: 100% means?
Regards,
George

Hide TOC and Playbar on selected slides

Hello,
I was wanting to hide the TOC and Playbar on for example the first slide of my CP6 project. I have created an advanced action with the 'Assign' action and variables - cpCmndShowPlaybar with 0 , cpCmndTOCVisible with 0. When viewing the project in web browser the playbar does not show but the TOc still shows - please refer to screen dumps below:
I am still learning about advanced actions - so some help would be greatly appreciated
thankyou
ali

Hi Ali,
I have reported it ahead.
This is a known issue with current Captivate 6 built.
Thanks,
Anjaneai

Automatic numbers of TOC and references are exchanged

Mac OS X 10.6.4 DE
InDesign CS5, 7.0.1 (DE)
Have a document formated with paragraph styles like title1, title2, text, etc.
Let this document start with a 2 digit number like 10 or 69, should have enough pages and titles 1 to fill later the toc frame
1. Create a table of content style, every occurance of title1 will create an entry, create a title with a style which will span all columns
2. Make a frame on the first page (or where you want to place the table of content.
3. This text frame has a corner effect on only 1 corner, the lower right corner is rounded with 14pt radius
4. Place in this frame the automatic generated TOC (or any automatic generated reference)
RESULT
In the first column the page numbers are switched:
Instead of page 70 I have page 07
71 > 17
72 > 27
and so on
WHAT CAN HELP?
Turn off any corner effects to this frame.

What I want is:
1. Bring the bug to attention, so that no one falls into the trap and does not deliver files with wrong number.
2. Bring it to attention to the English readers because they are more than German ones and in this group we will find also the product engineers.
I have filed a bug against it as I do always. I am sure that this behaviour is a bug, not a bug between chair and keyboard.
In a German graphics forum Windows users have confirmed this bug on their side too.
What I don't know, if the bug also applies to CS5 7.0 because in German all users have 7.0.1 which is only available in German and Swedish.

I'm unable to commbine pdf's files?...they are not password protected and they are adobe files

Any idea?

Hi tquinn24
Are you using Acrobat ?
If Yes, Please Refer : http://www.adobe.com/in/products/acrobat/merge-pdf-files.html
Or provide more details ...

RoboHelp 9 - problem with merged TOC and index

Using RoboHelp v9.0.0.228 I have a master project which contains several merged TOCs and indexes for other CHMs. This has worked successfully for years, but has now stopped working in our translated CHMs. I have checked all the relevant settings and they appear to be correct. The English version still works correctly. Can you help please? Many thanks.

OK, so my post was just a summary really!
I have a main project with its own TOC, index and topics. I then have several other projects with their own TOCs, indexes and topics, and these are merged into the master TOC. In all these projects, we use the indexes to contain function ids for our software, so that when you press F1 in a software function, it invokes the correct Help topic in the CHM. The software is coded so that it goes to the main project first, and then looks in the merged index to find the link to the Help topic.
In the individual sub projects, the TOCs and indexes are present and work correctly. Also, in the master project, the TOC and index works correctly in the original English version. However, even though the TOCs, indexes and topics are all present and correct in the translated versions (Russian, for example) the index in the master project does not contain the entries for the sub projects. The TOCs for the sub projects do, however, work correctly.

Acrobat 9 Pro: Links to Word TOC and cross references are lost

I'm testing Acrobat 9 Pro and while it successfully creates a PDF from Word 2003 with bookmarks, all my TOC and internal page reference links are lost.
I have triple checked the conversion settings from the Adobe PDF menu option in Word, and the "Convert cross-references and table of contents to links" check box is definitely selected.
I used the same Word document on another machine with Acrobat 6 Pro installed - and the TOC and cross ref links were created successfully. As far as I can see the Adobe PDF settings in Word 2003 on both machines are the same - the only difference is that one uses Acrobat 6 Pro and the other uses Acrobat 9 Pro.
The only setting in 9 Pro I turned off was the 'enable accessibility tagging' one; it's also turned off in 6 Pro. The remaining settings are the default.
A clickable TOC and internal links is essential for my clients who often have 400+ page documents.
Anybody have any suggestions? Or can anybody confirm that they do/don't get the same behavior in Acrobat 9 Pro?

Thanks Abhigyan - your test PDF worked fine for me.
This is what I've done today:
1. Checked for all instances of pdfm*.dot files and removed any that were lurking in old Application Data and Microsoft Office folders.
2. Deleted all Acrobat 5 and 6 folders and subfolders still lurking in Program Files.
3. Used Add/Remove to delete Adobe Reader 8 and its updates. I figure I can always install Reader 9 if I need it as a separate app.
4. Checked that everything was gone using the Windows Installer CleanUp utility (it was).
5. Restarted my machine.
6. Turned off my anti-virus software.
7. Did a search for any pdfm*.dot files - found one only in the current Microsoft Office folder and left it there.
8. Reinstalled Acrobat 9 Professional.
9. Opened my test Word 2003 document.
10. Checked all the Acrobat conversion settings and left them as the defaults.
11. Converted the doc to PDF and checked for internal links. Yes! The TOC links worked! But my joy was short-lived as the page link didn't work...
12. Tried various other conversion settings based on some suggestions from Lance in first level Adobe Support yesterday - still no page link. And I also lost the TOC links when I cleared the Enable Accessibility check box on the Settings tab of the conversion settings.
13. Checked the Edit > Preferences > Convert To PDF settings for Word in Acrobat 9 - add bookmarks and add links are both selected (default).
14. Used Acrobat 9 to create the PDF (File > Create > From File) hoping that this might might a difference. Nope. No TOC or page links.
15. Changed conversion settings back to default via Word 2003, and created a PDF from a longer document. Again the TOC links worked, the URLs worked (they always did), the bookmarks worked (they always did too), but the none of the internal page cross-reference links worked.
So my summary is this:
* I can only create TOC links *if* Enable Accessibility is turned on, but I have always turned this off in earlier versions of Acrobat as I don't need it and it made the process of creating a PDF from a long document incredibly slow - I'm wary of using it!
* I cannot get internal page links to work at all, no matter which method I use to create the PDF (from within Word or within Acrobat), and no matter which conversion settings I select.
I really don't know what to try next. Manually creating links for what could be hundreds of cross-references in a single document is NOT an option, especially as I have many of these long documents.
Any further suggestions?

Extension manager not listing any adobe apps. seems most recent extension manager is cc, and apps are cc2014

Premiere Pro CC and the New Mac Pro (2014)Premiere Pro CC and the New Mac Pro (2014)

Flash based extensions are not supported by PS CC 2014 anymore. Please refer to http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html, http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
And http://blogs.adobe.com/crawlspace/2014/06/2014-release-of-photoshop-cc-faq.html#plugins (scroll down to "Why don’t my 3rd Panels show up in the 2014 release of Photoshop CC? What happened to Oil Paint, Mini-Bridge & Kuler?”)
There is a new Kuler HTML5 panel available on Add Ons: http://adobe.ly/UgxQSN
Adobe is working on HTML based version of Adobe Watermark, eMailer, etc.
If some extensions are must have for you, you have to continue to use PS CC until HTML based counterparts become available.

We just upgrade to Adobe Illustrator CC and my menus and toolbars are huge icons.. How do I make them smaller?? Its freaking me out.

We just upgraded to Adobe Illustrator CC and all my toolbars and icons and menus are huge.. I just need to know how to make them normal sized again.

It is set to 124% but they are still huge.. The other programs I use are normal sized menus just the new illustrator is huge.. any suggestions?

When I am trying to package my artwork in Adobe Illustrator CC, it is not capturing my images and fonts. How do I make sure my linked photos and fonts are captured?

When I am trying to package my artwork in Adobe Illustrator CC, it is not capturing my images and fonts. How do I make sure my linked photos and fonts are captured?

Not all fonts can be packaged depending on their licensing. Some fonts are set to not allow packaging. For those you would have to manually locate them on your computer and add them to the folder where the packaging occurred.
For the images have you checked the "copy links" option?

News and other story videos will not play in Firefox for Yahoo v20.0.1,adobe and java are current. All I get is a circle going around, videoes work fine in IE9.

All plug-ins are up to date and current, have disabled and checked for problem plug-ins with no results. I have uninstalled and reinstalled Firefox, Adobe Flash Player, Java, Real Player multiple times with no results. Have also uninstalled my antivirus program temporarily with no results.

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
When in Safe Mode... <br />
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
If not, see this: <br />
[https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems]

Taking an infinite time to login to launch Acrobat XI trial - Adobe ID and password are correct ?

Taking infinte time to log-in to launch Adobe XI Pro Trial. Credentials, Adobe ID and password are coreect. Requested new password via log-in trouble shooting and got new password, still no success. Just get rotating icon and no response when I logi-in !

We can't know anything. you are not offering system information or otehr details liek what network conenction. As a start, refer to this:
Sign in or activation errors
Mylenium

Adobe flash player and youtube are not working

adobe flash player and youtube are not working

It seems that going to Preferences>Security> Check allow plug ins, then manage sites, and then allowing one site allows all??? Seems like a lot to go through. I have installed the player 4 times now and just got it figured out!

Where are the bullets for adobe. im creating a document and they are not in the toolbar

where are the bullets for adobe. im creating a document and they are not in the toolbar

ADOBE PRO I JUST GOT IT A FEW MONTHS AGO

I hope you can help me. I purchased adobe captivate 8 on line and when I click on the email link to download, it comes up with 7 programs, some are 64 bit and some are not, my computer is 32 bit. I am not sure which of these 7 to download? All or just

I hope you can help me. I purchased adobe captivate 8 on line and when I click on the email link to download, it comes up with 7 programs, some are 64 bit and some are not, my computer is 32 bit. I am not sure which of these 7 to download? All or just the 4 non 64 bit?

I tracked down the problem with the download and installation, my windows 7 was missing a file and after reinstalling windows everything worked out. The first 32 bit program in their list was used. I hope this can help others.

TOC and playbar area - Adobe Captivate6

Similar Messages

Maybe you are looking for