TOC and playbar free-float when played in IE9

I have this Captivate 7 session that I have published in HTML5.
When I play it in IE9 and i resize the screen, the TOC and playbar become undocked and are free-floating, while the session is resized.
This cause the playbar to end up floating in the middle of the screen at times, and the TOC becomes disconnected to the session, too.
What causes this?
Regards,
George

Hi Rod,
Thanks for responding.
I didn't actively change the width setting, I just went with the default. It's set at 250.
What would you recommend it be set at?
And btw, do you know what Alpha: 100% means?
Regards,
George

Similar Messages

Hide TOC and Playbar on selected slides

Hello,
I was wanting to hide the TOC and Playbar on for example the first slide of my CP6 project. I have created an advanced action with the 'Assign' action and variables - cpCmndShowPlaybar with 0 , cpCmndTOCVisible with 0. When viewing the project in web browser the playbar does not show but the TOc still shows - please refer to screen dumps below:
I am still learning about advanced actions - so some help would be greatly appreciated
thankyou
ali

Hi Ali,
I have reported it ahead.
This is a known issue with current Captivate 6 built.
Thanks,
Anjaneai

I recently got an iphone 5S and my songs not purchased from iTunes are grayed out (phone only) and are skipped past when playing them through my iPhone.

I recently got an iphone 5S and my songs not purchased from iTunes are grayed out (phone only) and are skipped past when playing them through my iPhone. i have tried the following:
1) Removing all music from phone and resynced to iTunes PC library.
2) Erased phone and restored from back up
3) Erased phone and started as a new iPhone
4) Reformated the music files in my library that weren't playing
5) Deleted songs from iPhone and computer and re-imported CDs
6) Tried to redownload my COMPLETE MUSIC LIBRARY from iCloud.
7) I have also turned it off and turned it back on several times
8) I tried syncing through my macbook (only moved partial songs to it to see if it would even work).
9) I have tried to get Siri to play them, did not work.
10) All music does play fine on my iPod Touch 3rd (iOS6 i think) gen and iTunes on Mac and PC
11) I added a CD to my roommates iTunes and it plays on their iPhone 5S but not mine.
After all of these things it is now WORSE!!! My iTunes purchased songs are now experiencing the same issue along with some (not all) of the original music files that were skipping and grayed out. My conclusion is i have no clue at this point! I have done everything i have found online in EVERY discussion, i have spent over 60 hours trying to get this to work and i am asking myself, i bought this product why am having to fix this when it worked just fine on my iPod touch (3rd Gen) and iPod Classic!!!! PLEASE APPLE FIX THIS ISSUE FOR US!!!!

I had this problem too after i upgdatd to OS X Mavericks... only the songs on my iphone 5s that i purchased from itunes would play.
i read something about it being a syncing issue. when you plug your phone into your computer with the usb cable, the person said to switch from automatic syncing of itunes to the "manual" option. mine was already set to manual so i wasn't sure anything would work. BUT, when i plugged my phone into my computer, it started to sync all of my music on my phone again (top of itunes bar where song playing/time is listed said "now syncing 123/534 songs to x's iphone"). once that was completed, i checked the music app on my iphone and everything was back to normal!
so, i would suggest setting your music syncing settings to manual if you haven't tried that yet!
hope this helps!

What does "you have data to Sync, go to TOC and press Sync" mean when I open the Bible 1 App. I don't know what "TOC" is

When I open my Bible +1 App the following appears - extremely too brief to read once - "you have data to Sync, go to TOC and press Sync.." on my iPad. I don't know what TOC is, or where to go to Sync my data. I also don't know WHAT data I have TO Sync. Also, is there an Instruction "manual" so-to-speak that explains more about the latest update from November 27? I'm working off an iPad 2 which is my ONLY piece of computer "anything" so all I'm woking on is my iPad. I also do not have access to any person's lap top or computer. Can you help me?

Went to Google, tonefox, and found the information. As I told Meg, I am still "way over my head" with computers and still have to remember that you can 'Google" pretty much ANYTHING.

HT204053 Why can't I update and get free apps when I don't have money on my account?

I have an iCloud account. Why can't I update and add free app if my account has no money?

You would have to ask iTunes store support: http://www.apple.com/emea/support/itunes/contact.html.

DVD created in iMovie and iDVD appears cropped when played in DVD player

Hi all.
I have created a MPEG4 movie in iMovie 5 and exported it to iDVD 5 and brunt it to DVD (PAL). Now, when I play it in a DVD Player it appears to be cropped or zoomed in a bit. But when it is played through computer DVD player it works perfectly.
I have fiddled with settings and tried it in a few different DVD Players (PS3 made it worse!) but to no avail.
I cannot for the life of me work out what it happening. I haven't changed any settings in iMovie or iDVD because I can't find anything to change.
Please help me!!!

Hi
Most certainly nothing to do with either iMovie or iDVD if viewed on a TV (CRT)
Old TVs had to have what's called an OverScann (about 10% isn't viewable) but when
such material is played back on a Mac or LCD screen one will see all strange lines
and dotted bands that Text-TV uses etc.
To be able to get a perfect match:
• Nobody can't - different TV set's varies
• You can adjust to a specific TV but then You need FinalCut and by trial and error
get the precise shrinking of Your movie.
Yours Bengt W

How do I get a smartshape button that open the TOC and pause the project when it is selected?

Please help! I created a smartshape button and assigned it the action of making the table of contents visible when clicked. However, now I also need the project to pause when the TOC button is clicked. Can someone please guide in as to what I need to do? Thanks

Hi,
Please follow the below steps.
1) Create an advanced action with the action "Show TOC"
2) Insert a smart shape and use it as button
3) Execute the advanced action on success of the shape button.
In the published output, movie will not continue on clicking the shape. Please let me know if it solves your issue.
Regards,
Haridoss

TOC and playbar area - Adobe Captivate6

I would like to be able to add buttons (smartshape used as button) into the TOC area and/or the recorder playbar area (playbar hidden).
Is it possible to "script" your own controls within either of these sections? say, instead of using default playbar of Captivate6

If you know enough ActionScript 3 you can create your own playbar. The TOC is a different matter. I haven't seen that done by anyone other than Adobe.

Song songs have not downloaded completely and are cut short when playing. How can i download these again?, song songs have not downloaded completely and are cut short when playing. How can i download these again?

I have noticed some of the songs i have downloaded have not fully downloaded and cut short before they reach the end of the track. Has anyone else had this problem or know how to download songs again without paying to do so again.

make shor that you have the latest version of itunes then you can go to the itunes store and on the right side by the quick links box there is "Purchased" click on that and then chage it to all in the top right corner and then find the song or songs and click the little cloud button to download them.
PS: You do not have to pay for that

Titles get cut off when playing after the burn

The title created in the movie are too wide and get cut off when playing it in a DVD player into a TV. Is there a setting I should use before burning?
Any help is appreciated.

You should turn on the TV Safe Area and make sure that everything that you care about is within this area. Anything outside the area is subject to the over-scan of TV sets.

No sound w/ WMP when playing DVDs

The picture looks fine and I have sound when playing music, video & Flash files. Also I have two drives and no sound on either of them and i have tried several different DVDs

Hi rbfeik,
Did you by chance upgrade from Vista to Win 7?
If so, did the DVD player work prior to upgrading?
Did you upgrade using the HP Upgrade Assistant?
I'm thinking you need to install a Win 7 version of your DVD software.
Here is the Win 7 64bit software and drivers page for your PC:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3813...
Look for DVD related software and drivers.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

OFFICE 365 and SKYPE free world calls free

I have office 365 and activated to skype free calls it shws i have a subscribtion and 60min free but when i try to call first my credis were gone and after that it shows that i have to buy more credits.
When i try to buy once more credits it shows that i allready have this subscibtion.
Whats wrong? Are you people working on this or not? How to use my 60 min free??????????
Tryed android, IOs , windows, MAC.
Solved!
Go to Solution.

arasdk wrote:
I have office 365 and activated to skype free calls it shws i have a subscribtion and 60min free but when i try to call first my credis were gone and after that it shows that i have to buy more credits.
Hello,
Your account shows that you were attempting to call a Lithuania cellphone. Your free minutes are for calls to landlines only. To call cellphones you need to purchase Skype Credit.
Buy Skype credit
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Jumpy playback when playing movies wthin iTunes

I just downloaded iTunes 7 and a movie purchased and downloaded successfuly. When playing it within iTunes 7 The picture is very jumpy and skips frames. Also when playing within iTunes 7 it generates or uses a lot of my resources 50% to 60% and veriates. I did figure out that I can watch the movie by opening my QuickTime player and find the file of the movie and it plays fine, flawless awesome quality of picture without jumping and my resources stay under 2% even if I run other aplications at the same time.
My question is how do I get it to play the same within iTunes 7 so I can enjoy the full screen option and avoid jumping through all the hoops just to open and play the movie? I did try fix tool within the instal program and it did not fix the problem. Thanks for any help you can give!
Kanda66866

I am having exactly the same problem--my movie and TV shows are very jumpy. It gets significantly worse at loud or fast-moving sections. I've not found any solution.

When playing any videos(E.g youtube) at mozilla firefox there will be a buzzer sound like "zzz"or cracking the sound is not smooth which seems like lag issue.

I have no audio problem playing videos at google chrome or while playing any games on my desktop which i mean the sound play is smooth without any extra noise,but when i uses mozilla firefox to play any videos(e.g youtube),there will be sound like "zzz" or u may call it cracking which seems to be lagging sound but it is not lagging at all.I try to use my phone to play music through my speaker and it's working fine.It only happened recently few days ago,the sound is irritating which make any music sound like crap..Please help..Oh and for your information when playing the video the cracking sound is not so much but scrolling up and down the page it became worst and louder.

Hey guys,i have try what your say and it did not work and i've been finding for ways all over the internet and getting really really pissed off.could this http://forums.adobe.com/message/4323464#4323464 be the problem?..any ways to help me solve it?maybe it just maybe not mozilla.It's just that google chrome is better in term of the crackling sound is minimum when i scroll up and down and i got a feeling it's because google chrome is fast not lag at all that's why not much of the static crackling sound ..

MicroStar NX6800GT-TD256 256MB AGP - problems when playing movies

Hello,
I have just upgraded from MSI Gf FX 5950 ultra to MSI 6800Gt AGP, and I have problems when playing all movies.
Movies are VERY overbrightened, and there are some color issues too.
I have tried installing various codecs, nothing helped. {I did a fresh installation of windows XP, and I installed win media 9 codec, indeo codec, and Allin1 codec ver. 60.27 }
i have also tried to play movies in different movie playes {BSplayer, win media player, MSI intervideo}, still same problem.
I never had such a problem with my old FX card.
In PC games, there is no problem at all, all runs perfectly.
Can anyone help me pls?
thank you for any tip.

Quote from: Karlosczech on 10-July-05, 17:03:00
Hello,
I have just upgraded from MSI Gf FX 5950 ultra to MSI 6800Gt AGP, and I have problems when playing all movies.
Movies are VERY overbrightened, and there are some color issues too.
I have tried installing various codecs, nothing helped. {I did a fresh installation of windows XP, and I installed win media 9 codec, indeo codec, and Allin1 codec ver. 60.27 }
i have also tried to play movies in different movie playes {BSplayer, win media player, MSI intervideo}, still same problem.
I never had such a problem with my old FX card.
In PC games, there is no problem at all, all runs perfectly.
Can anyone help me pls?
thank you for any tip.
I can guarantee its the video overlay color profile. I had the same problem with my evga 6800gt pci-e card. Easy fix too. Just reset it.

TOC and playbar free-float when played in IE9

Similar Messages

Maybe you are looking for