TOC disappears after allow blocked content

I have a Robohelp 9 project (single sourced through FrameMaker)
I can compile the help and run. When I view it, I see the full help along with the "Allow blocked content" message.
When I click Allow Blocked Content, my help appears but now the TOC is missing. (see images below)
I have been generating the help for the same way for a long time and this is the first time I have seen this problem.
I did install/uninstall Robohelp 10, but I have built help (albeit a different project) successfully after that
I do not really know what scripts are running here and blocked. Has anyone seen this and can anyone help?
Thank you!

Sadly, I'm not having much luck. The Chrome switch seems to work, but on IE, the file replacement causes the contents to flicker now rather than just hide the TOC. It never loads successfully after allowing blocked content.
I therefore copied the output to a web server and tried running it there. I'm seeing the same problems, which indicates to me that something is corrupt in my WebHelp build out of Robohelp.
I'm trying reinstalling RH9 now, but should that fail, do you know if RH10 would work successfully with the rest of my TCS 3.5 installation?

Similar Messages

  • How to automatically allow blocked plug-in in Internet Explorer

    Hi,
    I'm using an 'easy rotator' slideshow plug in on the home page of my site i'm building which works fine in chrome but gets blocked when I preview it in Internet Explorer unless i click 'Allow blocked content'. Is there anyway to bypass this block and have it apppear automatically to viewers as it does in chrome?
    Thank you.

    In a word... No. It's an end user setting to allow ActiveX and javascript content.
    Let's say for a moment that you COULD disable the script warning in IE with code in your page... An unsuspecting surfer using IE hits your site and the warning is disabled without their knowledge or consent. THEN they accidentally stumble onto a phishing site, and all of their business banking information is sent to an ID thief and they're cleaned out. It may take a while to trace the cause but if they do and discover that your page was the source... guess who's liable for that because of a slideshow?

  • Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.

    Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.

    discoveriweb wrote:
    This is iweb development where after publishing, things look different in IE than other browsers. U r correct that this is due to IE software but is iWeb related. After all, one uses iweb not to just publish in Safari but for all browsers.
    Which means that you are only considering half of the problem, but that's your choice.
    I'm out.

  • Thunderbird does not show a blocked remote content notification bar when content is blocked even when Allow remote content is not clicked

    Thunderbird does not show a blocked remote content notification bar when content is blocked to allow remote content. The allow remote content box is not enabled in the privacy settings.

    Is it always like that? or just from one source?
    How are you viewing emails ?
    (view / Message Body As) should be ''original html ''

  • Music and Video Content Disappears After Transfer From itunes

    Hi
    I am experiencing a very strange issue so I hope someone can help or has at least experienced this themselves.
    I have my iphone set up so I manually manage/sync music ans content. For the last 2 weeks everytime I transfer music and video to my iphone it disappears after I eject the device from itunes. When transferring the content this works as expected and I can see the tracks being transferred. If I then go into my music library while the iphone is still connected to my laptop I can see and play music on the iphone.
    As soon as I eject the device (in the recommended way) my iphone music library shows no content what so ever it has vanished. If I then reconnect the iphone to itunes, on the iphone summary screen it seems to show there is content on the iphone as the GB capacity bar is filled up with whatever I have put on their but no content is visible on the iphone.
    Interestingly if I download a podcast or music directly onto the iphone this stays on there.
    This is driving me mental has anybody else experienced this and if so know how to fix it?
    Thanks
    Chris

    I'm having the same issue and haven't found anything on how to fix it other than restoring my phone. Won't be doing that. Hopefully this bumps it back to the top and someone will have an answer.

  • Even when I add a Trusted File location, I still recieve the Allow / Block message?

    We use the "Protected Mode at startup" with Acrobat Reader 10.x and when we added trusted location, then the allow / block message disappears.  Sadly, with Acrobat 11.x even after add the folder locations to the Trusted list, the PDF file still ask "Allow / Block"
    Is there anything else I need to do with 11.x to make the message fo away, without turning off Protected Mode?
    Cheers
    J

    Can you please elaborate your workflow and error more?
    Like what file you are trying to access and the location etc.
    Also, please try latest Adobe Acrobat Reader DC now.
    Thanks,
    Shakti K

  • Playlist disappeared after software update

    Hello,
    All my playlist disappeared after i upgrade my itunes to the version 11.1.5 (5).
    Can anyone help me?
    Thank you

    Joshua
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Regards
    TD

  • Submenu disappears after click in Firefox only

    I have created a horizontal spry menu which is working fine, but in Firefox the submenu disappears after clicking a submenu item - you then have to roll over the parent menu item to make the submenu visible again. In Safari the submenu remains visible even after clicking an item. I would prefer the menu to behave as it does in Safari. A link to the site is www.jakeharris.ca if anyone can help - look at it in Safari and Firefox to see the differences (not sure how it is in IE!)
    Many thanks,
    Hillary

    That is how the submenu is programmed to work...to hide when you get to the page you call.
    Although my Safari did not work the way yours did (I am on XP), I think what you are actually asking about is what I would call "local page indicators." That is, a kind of 'sign' that you are on a specific page.
    In your case, for each page, you would show an "open" menu with the appropriate menu list item highlighted with your normal hover color.
    There may be a way in the javascript to allow the submenu on a page to be always "on" or open, but I don't know much about javascript, so I can't help with that.
    If you have not used a Template to build the pages, it is even easier than fiddling with the javascript, if a tiny bit timeconsuming.
    Locally-significant styling is pretty straightforward, in theory.
    On each page, replace the class on the top menu item (on the main bar) for that page (right now it will say something like <li><a class="MenuBarItemSubmenu" href="#">Item 1</a> with a new class (you might call it "localpage") so you can make descendant selectors that apply to showing the submenu. Then write styles that cancel the 'hide' technique...get rid of the left: -1000em; for instance. I haven't gone through and worked this through, but it should work. Let me know if you need code; I need to go to breakfast right now, though!
    Then make another class to style the individual items for their pages, for instance .local that can be grouped with the hover styles that change the item color when you hover over them:
    ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible, .local
        background-color: #33C;
        color: #FFF;
    On each page, add this class to the menu item that pertains to that page:
    <a href="#" class="local">Chasing Wild Horses</a>
    on the "Chasing Wild Horses" page, for instance.
    This is a pretty subtle and elegant solution to what most people use <h1> heads for. Keep in mind, though, that if you want SEO to understand your page, without a hierarchical text indicator, it might be too subtle, as h1, h2, etc. heads help to indicate levels of importance of content for search engines and screen readers.
    But it will look great, nonetheless.
    Beth

  • HT1694 All of the mail on my iPad and iPhone disappeared after my outlook downloaded. How to I keep mail resident in both places?

    All of the mail on my iPad and iPhone disappeared after my outlook downloaded. How to I keep mail resident in both places?

    I managed to lose an earlier reply I'd started before you came back with your "solved" so I didn't bother to retype it.
    It went something like this:
    You should be able to recover the media with the tips in  this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into an authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup.
    The older .itl file is useful however as iTunes should see this as the "home" library for your device which will allow you to preserve the application settings. (.itl file? Mac? I assume the library has migrated from PC to Mac at some point). Any files in the Previous iTunes Libraries folder or did you kill those as well? The most recent of these would be the best place to start.
    And no, the .itl file is not editable by mortals...
    Once you've restored the media from backups or recovered whatever else you useful can from the device, the scripts MusicFolder Files Not Added and Super Remove Dead Tracks should help get the library up to speed with the contents of the media folder.
    tt2

  • Edits in Finder sidebar disappears after reboot

    Hi,
    When I change the content of Finders sidebar the changes I make disappears after a reboot. Doesn't that indicate something wrong??

    Personally I have not enabled the root account and have no intention of ever doing so. I think the problem is really that the .DS_Store file is not being rewritten, perhaps because of the permissions. I would simply remove the .DS_Store file from the affected folders and then arrange those folders as you want them to be and close the folders. This will create a new .DS_Store file with new settings for the folders. As the .DS_Store files are invisible you will either have to use one of the many utilities that allow you to show invisible files or use the Terminal remove command. If the problem is the permissions you may have to authenticate to remove the files, or use a sudo remove command.
    Francine
    Francine
    Schwieder

  • Http error 405 method not allowed sap content server windows

    Hi Expert,
    we have install sap content server 6.5 on microsoft windows 2012 using
    IIS 8.0 and MAXDB 7.9 SP 8 Build 21. After configuring the content server it self we still cannot
    create repository error "http error 405 method not allowed"
    Oac0 --> tab Create --> Content rep.
    I have implement note number 1704365 - IIS roles not created by
    default when installing Content Server on Windows 2008. even though it
    is not applicable to our IIS.
    when i try to open http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
    it always direct us to download file not showing the version number.
    is there any solution for this issue?
    Thanks a lot,

    Dear,
    Can you please try following URL ?
    http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046
    http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046&contRep=<Repository Name>
    Regards
    S S B

  • Contacts will disappear after bulk vCard import

    Hi all,
    After bulk importing multiple 700 vCard contacts to the Address Book application (Version 8.0 - 1371) on Mac OX Mavericks, they disappear after closing and reopening the application, just showing the original 7 iCloud contacts I previously created.
    Facts:
    I am trying to import (by drag & drop) 700 vCards 2.1 - windows latin 1 (already selected this format in the Address Book Settings), created with Outlook 2002.
    Address Book is connected to iCloud
    Already tried, unsuccessfully:
    Merging previously all vCard into a single one.
    Doing the import after disconnecting iCloud, merging the contacts, reactivating iCloud.
    Doing the import after disconnecting WiFi and LAN, merging the contacts (even without reactivating them afterwards).
    Creating a new contact after the import before closing the application.
    The previous 3 combined.
    Importing the merged vCard directly on iCloud (getting Error though the file doesn't exceed the limitations)
    In any case is that after closing the application the imported contact not be there any more: only the 7 iCloud contacts (or the "on this mac" if iCloud deactivated) will remain in the Agenda. I do not think it has to do with iCloud.
    I the only clue I have, is that importing the vCards one by one, or in small groups (>10), they "may" remain recorded in the Address Book.
    Does anyone have an idea or workaround to make this bulk import of vCard contacts?
    Thanks,

    So I had to do it manually... in blocks of 5-15 to see the conflicting vCards, that would not be recorded (and hence not automatically synchronized with iCloud).
    Out of the 712 contacts, 8 were not recognized by the Adressbook.
    No idea why, because the other 704 vCards were in the same format (v2.1) and codification (Windows latin 1), and where having also special characters in the .vcf filename or in the data inside.
    I think there is a codification/import issue that Apple should check.

  • How to get the name of the selected building block in a building block content control?

    Hello,
    How can I obtain the name of the selected building block in a building block content control?
    I want to use this together with an on exit-event to populate other content Controls depending on the name of the selected building block item.
    Environment: Word 2010.
    Thanks,
    Peeter

    Hi Peeter,
    As far as I know the building block is the pre-built content, and the
    BuildingBlock object represents a building block in a template. After add the building block to the document, it inserts the content to the document.
    Building blocks are stored in the templates, therefore, to access the building blocks available for a document, we need to access an attached template.
    So, I think, we can’t obtain selected building block in the document.
    There are some links that may benefit you:
    # BdingBlock Object (Word)
    https://msdn.microsoft.com/en-us/library/office/ff192414.aspx?f=255&MSPPError=-2147217396
    # Working with Building Blocks
    https://msdn.microsoft.com/en-us/library/office/ff837878.aspx
    # Set the Building Blocks That You Can Use for a Content Control
    https://msdn.microsoft.com/en-us/library/office/ff197523.aspx
    Regards
    Starain
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • "Restrictions Do Not Allow Explicit Content"???

    Downloaded a few podcasts yesterday.  Listened to one of them on the ride home last night (from my iPhone, after syncing).  Tried to pick up where I left off this morning, and these particular podcasts are "grayed out" and, when tapped, say "Content Not Allowed.  Restrictions do not allow explicit content".  I checked my iTunes preferences (Parental), nothing is checked, no restrictions.  These are the very same podcasts I was listening to 12 hours ago!  And they play fine on my computer, within iTunes.  Just won't play on the iPhone after syncing.  And it's just these podcasts (Start Up by Alex Blumberg -- far from explicit or pornographic).  All the others are playing fine on the iPhone. 
    Any ideas? 

    I do not understand why APPLE is making it Rocket Science to protect our kids from this por-nography through their Store.
    I have been in a dialgue with APPLE now for 2 weeks about the APP's that continue to come up, and researching further their podcasts also. They continue, as recommended here, to suggest that you complain to the a feedback link that, unfortunately, ends with a thank you and we will not be contacting you personally about this.
    My suggestion is that you go to one of their 24 hour response links, here is one! (http://www.apple.com/support/itunes/contact.html?form=app_store&topic=App%20Stor e&subtopic=Downloading%20and%20updating%20Applications) and complain there. It is their respondsibility to manage their content.
    The other suggestion is to notify everyone you know of your issue with APPLE and encourage them to also notify APPLE!
    Everyone that I have notified is equally dissatisfied with APPLE.
    Shame, we have to go so far to get APPLE to do what's right!

  • On the left side of my address bar it is showing that firefox has blocked content that is insecure, whenevr I'm using facebook or any other apps related to it.

    Firefox is blocking content from almost all the websites.
    It is even showing that for this page.
    Every time I refresh the facebook page/ an app on the facebook this will appear.
    Previously it used to crash firefox, then I upgraded it but since then it is just keeping on blocking if the gray/ geen colored padlock is active on the left side of the address bar.
    So every time I get this error I have to refresh the page & again disable protection on the page.
    If the website is verified then is firefox blocking almost everything.

    Hello,
    I would recommend running the latest version, Firefox 25. Improvements are always being made based on user feedback.
    Starting in Firefox 23, if a secure page includes certain types of insecure content, Firefox blocks the insecure content and a shield icon will appear in the address bar. See this article for more information about the new mixed content blocker: [[How does content that isn't secure affect my safety?]]
    To temporarily allow the mixed content to be displayed:
    *Click the '''shield icon''' [[Image:Mixed Content Shield]] in the address bar and choose '''Disable Protection on This Page''' from the dropdown menu.
    [[Image:Fx23MixedContentBlocker]]
    To allow insecure content to be displayed in all secure pages, enter '''about:config''' in the address bar and double-click on this preference, to toggle it from true to false:
    '''security.mixed_content.block_active_content'''
    You can also use this add-on instead, to toggle the preference:
    *[https://addons.mozilla.org/firefox/addon/toggle-mixed-active-content/ Toggle Mixed active content] add-on
    You may want to do this only for the current session, then reset the preference back to "true" and check back with the site to see whether it's been fixed, since this is a global setting that exposes you on all sites, not just the one you care about.
    Let us know if this helps!

Maybe you are looking for