TOC does not retain bookmarking between sessions

Hello,
One of my complete courses developed in Captivate for SumTotal LMS is not retaining bookmarking between sessions.
When you re-enter the course, some of the bookmarking is lost.
Does anyone know of a fix for this issue?
Thank you ahead of time.
Chuck

Hello Lilybiri,
Yes, Self Paced Learning is selected in TOC settings.
The individual that was testing the functionality was viewing the content linear.
He left the course after viewing about 10 slides out of 85.
When he returned to the course, the first 10 slides did not have a checkmark.
It did return him to the spot that he left off, and started placing checkmarks from their.
No issues with the knowledge checks or final quiz not working.
Only issue is that the checkmarks were no longer present for previously viewed section.
He stated that this is an issue.
I do not see it as such as long as performance is not compromised.

Similar Messages

ALLOWED Cookies Exception List does not retain entries from session to session.

YES, I've searched the KB for an answer...no joy. I want to manage my cookies by adding the few sites that I want to allow cookies for, with all other sites being denied, and me being prompted every time a site wants to dnld a cookie. I believe I understand all the available settings, but I can't bet FF to retain the list of allowed sites from session to session, and sometimes FF won't retain them even immediately after I save them. I never had a problem with FF3, but now I'm having this problem with FF4.

Issue unsolved. Hoping to receive deeper analysis.
Thank you cor-el, that's a good suggestion, but, something I already knew. I didn't execute Clear Recent History...Clear Recent History is NOT the cause of the problem.
Additional Information: In Options\Privacy\History my settings are: "Use custom settings for history", Permanent Private Browsing mode = ON, Accept cookies from sites = OFF. Should I expect to be able to click on the Exceptions button, and enter urls into the exceptions pop up window as ALLOW, and expect them to be there in subsequent FF sessions? I've noticed that the Exceptions pop up window does not have an "OK" button as I would expect from observed FF convention...should there be one? After entering a url, my only choice is a "Close" button or the Red "X".
Follow on question: Is it possible that a data error occurred during install, preventing an applet from loading correctly, which would prevent the retention of list entries into the permissions.sqlite file? My permissions.sqlite file is located where the KB says it should be, shows a size of 2K, and a Date Modified of today. Note: I have continued to try to enter and save urls into the Exceptions List with an ALLOW value with no success.
Or, perhaps I should migrate back to FF 3.xx?

HOSTS file does not retain changes between boots

I make a number of changes to my HOSTS file for various reasons. Lately, though, I've noticed that attempts to alter the HOSTS file are reverted automatically for some reason.
I modify my HOSTS file by using the command at the terminal: sudo nano /private/etc/hosts
After editing the HOSTS file, I will save while exiting with control+X. At this point the changes are retained. Looking at /private/etc/hosts or /etc/hosts will show the changes I've made. Pining the domains I've modified will show the relevant changes.
Everything is working at this point.
However, at some point after a reboot, the HOSTS file will revert all of my changes without my asking. Looking at the HOSTS file will show it in the state it was before I made any changes at all, despite the file being modified and saved in the previous session.
Could anyone please advise as to how I can permenantly modify my HOSTS file? Again, I AM editing the file as root, and I AM saving the file. It works fine until reboot.
Thanks for any help.

With Lions should be fine editing the standard /etc/hosts file
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1           localhost
add here your IPv4 hosts list
255.255.255.255     broadcasthost
::1                 localhost
fe80::1%lo0         localhost

Sync between Firefox English on WinXP and Firefox French on MacOS 10.5 (english or french) does not bring bookmarks (bug brings tabs from other computer)

Sync between Firefox (latest) English on WinXP and Firefox French (same version) on MacOSX 10.5 PPC (iBook G4) (english or french) does not bring bookmarks (bug brings tabs from other computer). Account WORKS, yet sync does not sync anything BUT the "alien tabs". Using Sync to migrate plataforms in this scenario is impossible. Any hints here ? Thank you.

After experimenting, each sync is scheduled on the each individual device and after all of them have completed, the about:sync-tabs page shows the updated tabs. It is not realtime, it seems to take a few minutes. This being the case, a fresh login did speed this up. If I logged out of the firefox account on my mobile device and logged in, I immediately saw the tabs on the about:sync-tabs page.
There is no limit to how many can be synced. There is a number of tabs that make it to the queue for the next scheduled sync. The tabs are done by a time interval as far as I noticed in the experiment.
The history is indeed merged with the history from other devices. It is merged the synced to each of the devices over an interval of time.

Webhelp TOC does not expand when I click on links

I have developed a Webhelp system, and it has this weird
problem which I don't know how to fix. Imagine the following
scenario:
I have a topic called "page1.htm", and in that topic is a link
to "page2.htm". [/li]
I also have a topic called "page3.htm" and in that topic is a
link to "page4.htm"[/li]
If I click the link to "page2.htm", it will load "page2.htm"
properly, and expands the TOC and highlights the "page2.htm" item
in the TOC.[/li]
If I click the link to "page4.htm", it will load "page4.htm"
properly, but the TOC does not change at all and "page4.htm" is not
highlighted in the TOC.[/li]
It doesn't seem to matter if the TOC entry for "page2.htm" is a
book or a topic[/li]
It doesn't seem to matter if there are two TOC entries for
"page2.htm" - Robohelp will just expand to the first one.[/li]
Can anyone please help me? Thanks!
Gary

Hi Anne and Leon! Thanks for taking the time to help me sort
this out.
quote:
Originally posted by:
AuthorAnne
What browser are you using, and what version of it? Internet
Explorer Version 6
Does the same problem occur in other browsers? Unfortunately
I can't try it in other browsers because the computing environment
here is very rigid :-(
Do you have any books linked to specific topics? Nearly
every book in the TOC is linked to a topic. Some of them are
synchronised, and others aren't, but I can't figure out what the
difference between the topics is.
In the second page of your WebHelp properties, under Single
Source Layouts, do you have Synchronize TOC set to
"Automatically"? Yes.
quote:
Originally posted by:
MergeThis
Gary, I suspect that you might have multiple calls in the TOC
to the same topic, as alluded to when you say:
"It doesn't seem to matter if there are two TOC entries for
"page2.htm" - Robohelp will just expand to the first one.[/li]").
That's the default behavior for Webhelp.
Thanks for your advice on handling multiple
calls in the TOC to the same topic - I have some deliberately
duplicated topic links so this will be useful. However, I don't
think this is the cause of problem. I built the TOC myself and
there are only 5 duplicated TOC entries, but the problem I am
having is occurring with non-duplicated TOC entries.
Thanks again for your time and help!
Gary
PS, I live in Australia, which explains the time difference
:-)

The "Logout" button does not appear my Sakai sessions. I have to mouse over the blank area to find the link to logout. The Logout button does appear in Safari. Firefox version 10.0. Mac OS 10.7.2

The "Logout" button does not appear my Sakai sessions. I have to mouse over the blank area to find the link to logout. The Logout button does appear in Safari. Firefox version 10.0. Mac OS 10.7.2

To make sure that all required media is in the library contain the project you need to "Consolidate media" see: http://help.apple.com/imovie/mac/10.0/#mov882dee351
You can then copy the library to your laptop with the Finder and open it with the same version of iMovie. The last phrase is important since Apple has made changes in the project format several times even between minor updates of iMovie 10. Earlier versions may not be able to read the library and later versions (not possible in this case) may cause the project to be updated so that it is no longer readable by the desktop version. iMovie on the laptop will not at first find the copied library - you will have either to double click on it or File - Open library - Other and navigate to its location.
Geoff.

MW64, cs6 bridge when I move or copy files the context menu does not retain recent folder destinations after I close the program

W64, cs6 bridge when I move or copy files the context menu does not retain recent folder destinations after I close the program. The context options that show are the ones from original install. The workspace I set up is also gone. I have every explorer box and cleaner checked to save recent. Had to disable nivedia desktop software because of weird display conflict. Have Dell pro support and they cannot fix. Any ideas to help me with this would be appreciated.

Self-solved! I work in column view in Finder so get there in a Finder window with folders and files appearing.
There really is no problem, just select an ITEM in the COLUMN before right-clicking!
The "old" context menu will appear. If you click in the white space in that column (or anywhere in a Finder window) and then place the cursor over a folder or file WITHOUT selecting it and right-click you will bring up the secondary context menu - Open, Copy, Duplicate, View Options and a greyed out Labels option. No "Move to Trash".

TOC Does Not Open in WebHelp Generated with RoboHelp 11

The TOC does not open in WebHelp Generated with RoboHelp 11. I tried other solutions posted on this forum but no success. Any ideas? Thanks in advance for your assistance.

Hi Jeff,
Thanks for responding! I uninstalled and reinstalled RoboHelp 11 and the WeHelp appears to display OK now. BUT, I have graphics in my project that are not displaying, only the empty placeholder for the graphics. This was displaying fine in WebHelp generated with RoboHelp 9 but not now. I see the graphics when I do “Preview Topic” but not in the generated WebHelp. Any clues what is causing this behavior? How can I correct it?
My tables appear very strange too. They are the default table in RoboHelp with the raised gray/silver border. However, in WebHelp, the tables appear as double solid black lines for the border. The tables appear fine in the topic but when viewed via “Preview Topic” and WebHelp output, they are double black likes. Help!
Another thing is that I also get an occasional message about a topic that says “The reference to the file contains illegal characters and will not be shown in Project Manager. How can this be? My css is valid and I use it in numerous help projects.
Once again, thanks so much for your willingness to help. It is much appreciated.

Scroll bar does not retain its position after or before pack

Hi
My Scroll bar does not retain its position after pack in my application.
But i need to retain its state.
My code snippet is :
System.out.println("VAlue--->" + getHXValue());
scrollPane.getHorizontalScrollBar().setValue(getHXValue());
pack();
My VAlue printed is 100.
But my positon of scroll bar is at 0 th location.
Can any one help me.....

Swing related questions should be posted in the Swing forum.
My code snippet is :Snippets don't help.
If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)",
see http://homepage1.nifty.com/algafield/sscce.html,
that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
Don't forget to use the "Code Formatting Tags",
see http://forum.java.sun.com/help.jspa?sec=formatting,
so the posted code retains its original formatting.

Copy and Paste on Safari 5.0.2 does not retain formatting

Hi there.
I'm on Safari 5.0.2. and when I copy and paste something (in this case, on a message board--vBulletin, but it doesn't work on anything else) it does not retain the original formatting (for example--bold, italics, underline, etc.) If I copy something from Safari and paste it into another program, TextEdit for example, the formatting remains and works fine.
This is extremely annoying. Anyone have any ideas?
*If you're on Safari, try copying* and *pasting this sentence in a reply* --it will remove all the formatting for some reason. It will work in TextEdit, however. It's not just this message board software either...try it somewhere else too.
Message was edited by: FINALBOSS

Hi
copying formatted text & pasting in Safari does retain the formatting, so long as the place you're pasting it supports varying fonts/styles.
So copy/paste here, just shows as plain text.
c/p to blogger.com in the 'compose' tab - works fine
c/p to blogger in the 'html' tab - plain text
same with textedit: paste from safari to textedit +in a plain text document+ -you get plain text.

HT1677 Safari when set to private browsing and cookies from sites I vist has a problem. I want it to keep cookies from sites I use such as my email and comic sites. Right now it does not retain cookies that set up my choices of comics as site internal fav

Safari on the IPAD has the following problem.
When set to private browsing and only accept cookies from sites I visit does not retain them after I shutdown Safari and then later restart it. I also found out that even if I leave it in background and close the cover of my case it will not retain the cookies even though I did not deactivate it.
Things like email Ids and cookies that contain site specific favorites get deleted.
Here is a site where you can set a series of favorites which get stored as cookies.
http://www.seattlepi.com/comics-and-games/fun/Judge_Parker/
Any Ideas... I have tried various settings but only public browseing keeps the cookies. I use private browsing to curtail popups and various trash from bothering me on my IPAD and Safari....

Safari on the IPAD has the following problem.
When set to private browsing and only accept cookies from sites I visit does not retain them after I shutdown Safari and then later restart it. I also found out that even if I leave it in background and close the cover of my case it will not retain the cookies even though I did not deactivate it.
Things like email Ids and cookies that contain site specific favorites get deleted.
Here is a site where you can set a series of favorites which get stored as cookies.
http://www.seattlepi.com/comics-and-games/fun/Judge_Parker/
Any Ideas... I have tried various settings but only public browseing keeps the cookies. I use private browsing to curtail popups and various trash from bothering me on my IPAD and Safari....

Is there a save option on iPhoto? Sometimes iPhoto does not retain the name on a face I've added to a photo.

Sometimes iPhoto does not retain the name on a face I've added to a photo. I have 'added a face' then flipped to the next picture then back to that picture and the label has disappeared.

No. It's supposed to be automatic. You might try repairing the library's database and then see if it still crops up now and then. If that doesn't help try rebuilding it the same way.
Launch iPhoto with the Option+Command keys held down and select the database repair option in the rebild window:
Then the rebuild option if necessary.
OT

TOC Does Not Synchronize

I have a large WebHelp file containing 775 topics in it. Most
of these are field descriptions. In the TOC, I have a book titled
Fields- A to Z. When I click one of the fields that begin with a
higher letter in the alphabet (e.g., M), the TOC does not jump to
that location. Instead, it jumps back to the top of the book (in
the A's). In my WebHelp settings for the file generation, I have it
set to automatically synchronize the TOC. I do not have this
problem with my other (smaller) WebHelp files.
Has anyone else come across this problem?

Jodee,
After the TOC jumps back to the top of the book, scroll down.
You will find the selected topic actually is highlighted.
So WebHelp (1) properly highlights the selected topic, then
(2) refreshes from the top of the book. We haven't found a good way
to kill step (2).
A possible strategy is to divide the TOC into books, each
with no more topics than will fill the left column. With all the
other books collapsed, the current topic line won't disappear below
the bottom. If you click a link to a topic in another book, the new
book should open from its first topic and the selected topic is
highlighted.
It's not a great solution, I know.
Harvey

I am using CS6 and when I go to save an image for Web the image does not retain its quality

I am using CS6 and when I go to save an image for Web the image does not retain its quality. The first week I did this it worked just fine and now the images save very pixely.
Here is a screenshot of my image on the artboard as I am editing it
Here is a screenshot of the image as I'm trying to save it for Web
As you can see, the image becomes pixely. I have tried to save it as every type of png and jpeg but nothing seems to work. I have no idea why it has started to do this. Please help!

Change None to Art optimized then click apply(alteast in CS5 there was an apply, believe they removed that in CS6 as so many people missed that part).

TOC does not include hyperlinks in export to PDF

I created an eBooklet in Pages, but when I export it to PDF, the TOC does not include hyperlinks to the pages. There aren't any signs of the TOC including links in the original Pages document, either.

The iWork '09 DVD can be had at Amazon. You will need to apply the Apple IWork 9.3 updater to bring the applications to their last revision, and compatibility with Mavericks and Yosemite. The help menu in Pages ’09 v4.3 has a link to the that specific PDF user guide. The Number '09 guide is there too. The Keynote '09 PDF User Guide is here.
Pages v5 documents are not directly backwards compatible with Pages '09. You will need to export the content as Pages '09. Since Pages v5.5.1 is lacking nearly 100+ features that were in Pages '09, you must take care with opening Pages '09 documents in Pages v5. It will filter out content that it does not support (e.g. linked text boxes).
Any double-click on a Pages document with both applications installed, will default to opening in Pages v5.5.1. Deliberate effort is required to open Pages '09 documents, either by the Pages '09 file chooser, or a two-finger tap (on your Air) to bring up the secondary menu that has Open with > Pages (4.3) on it.

TOC does not retain bookmarking between sessions

Similar Messages

Maybe you are looking for