TOC heading indent (when going from 9 to 10)

Hi,
My TOC has three styles; TOC Heading 1, TOC Heading 2 and TOC Heading 3. TOC Heading 2 and TOC Heading 3 each has their own indent so they'll align after TOC Heading 1's lead number:
1 TOC Heading 1
  1.1 TOC Heading 2
      1.1.1 TOC Heading 3
But what to do when TOC Heading 1 changes from a one-digit lead number to a two-digit one?
10 TOC Heading 1
  1.1 TOC Heading 2
      1.1.1 TOC Heading 3
Thanks!

Nice!
I'd have to apply this space to the last TOC level 3 in a bunch right?
6
6.1
6.1.1
6.1.2
6.1.3 <- This one
6.2
To achieve this:
6
6.1
6.1.1
6.1.2
6.1.3
6.2
Otherwise it'd probably end up like this wouldn't it?
6
6.1
6.1.1
6.1.2
6.1.3
6.2
I hope that made sense!
Cheers!

Similar Messages

  • Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

    Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

    In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

  • When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version?  (mostly Helvetica) where and how do I get those Fonts?  And/or, can I use the Mac version of these Fonts?

    When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version?  (mostly Helvetica) where and how do I get those Fonts?  And/or, can I use the Mac version of these Fonts?
    Thanks, Rich

    In order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf  type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.

  • Print issues when going from develope to print

    In LR5 when going from Develope to Print, I loose the picture and the print tab is greyed out.  Never had this problem before, did I do something wrong

    Make sure the source remains the same - check the filmstrip.
    The only suggestion is to place the batch for editing and printing into a collection or (temporary) quick collection and access the images from there in both modules.

  • Problems losing quality when going from develop module to library module ??  anyone have a fix

    Problems losing quality when going to library module from develop module.  Sharpness and color quality decrease

    This is normal. There will be a difference as you are comparing Library Previews with the image in Develop which accesses the original file, although the difference is usually slight. Real results need to be judged from exporting after selecting the output sharpening e.g. for glossy paper, if printing or screen sharpening for web images or emailing.
    The idea with sharpening is to apply capture sharpening so that the image in Develop looks just sharp but not over sharp. Lightroom then uses the correct algorithm for output sharpening based upon image size and quality settings etc.

  • Why do documents shrink when going from Pages To Word?

    To work on my Word docs on my iPad, I email them to myself, and save the attachments in Pages. To get them pack to my laptop, I email them back to myself from the iPad, as Word docs. The attachments that come back are half the size of the original (in KBs), even though I do not remove any content, and usually have added some. Does anyone know why this is, and what occurs to reduce the document to half the KBs it was before?
    Thanks.

    The content is text only, being composed in Word and edited in Pages. It's getting incoporated into a bigger Word document (the master document). I worry that a document which goes from 100 KB to 40KB is missing something - and that it will somehow corrupt the master document if I add it in.
    Pages takes .docx docs and saves them as .doc. But converting them back to .docx in Word after they've been compressed doesn't bring them back to their original size.

  • How do I remove the header/footer when printing from ipad safari?

    I'm trying to print invoices from a web app I'm using in safari on my ipad1. When I print there doesn't seem to be anyway not to include the header and footer that prints by default with Safari. I'd rather not have to use a second app just to print and go back and forth to the browser. Any ideas on this?
    The printing itself is no issue at all and I'm using an HP6500A plus over an airport extreme in case you need those details.

    I have been bumping up against this issue in the last few days. I have redone my output as PDF and that works OK - i.e. There are no Safari footer details on the AirPrint printed page.
    But now I find that PDF documents frequently print with white space bands across the page (chopping off some of the text). I can even replicate this when pinch zooming on my iPad with a PDF document. So I suspect a bug in the PDF processing functionality within IOS. I am running IOS 4.3 so I had better update to see if the issue goes away.

  • Outlook 2010 not responding, hangs, freezes or stopped working when going from one email to another

    Hi all,
    I have an issue with one of my clients running Office Pro Plus 2010 32bit on windows 7 pro with exchange 2010 service pack 3 where they have voicemails coming in as .wav files and have a rule set up to automatically going into a sub-folder call
    "voicemails". I have deleted all the voicemails except for 5 for testing purposes (as there was over 800 messages and thought this could of been the culprit). When opening these voicemail emails, outlook doesn't respond for about 1-2 minutes and
    then opens the email eventually, then I can open the .wav file. The .wav files are approximately 50kb to 200kb in size. All other attachments seem to open quickly with the rading pane on or off.
    Troubleshooting Steps I have done;
    - Install the latest updates
    - Check to make sure Outlook is not in use by another process
    - Investigate possible issues with add-ins
    - Check to see if your mailbox is oversized
    - Repair your Office programs
    - Repair your Outlook Data files
    - Check to see if your antivirus software is up-to-date or conflicting with Outlook
    - Create a new user profile in Outlook
    - Created a new .OST
    - Perform a Selective Startup to determine if another program is conflicting with Outlook (for advanced user)
    - Create a new Windows user profile (for advanced user)
    - Started in outlook /safe mode
    - Turned off chached mode
    - Checked error logs and receive a Outlook Hang error ID: 10001
    Since doing all the above troubleshooting, I have found out the same problems occur within a Terminal Server Session (Server 2009 R2 with Service 1) running Outlook 2010 Professional Plus.
    One thing I notice is that when I click on one of the email messages, where is usually says "connected to MS exchange", it is saying "requesting data from exchange".
    The above is happening with another user so this is not user specific.
    If you need any other info, just let me know.
    Thanks in advance.

    Hi,
    Logon OWA and check if the voicemails can be played fine, make sure the mails are good.
    If you have installed the improper drivers for any devices or hardwares, this kind of issue may occur. Actually some devices which seem to have nothing to do with the issue may also be the culprit, like a printer or some audio devices in this case.
    Try restore the system to an earlier date if you have backup.
    If you have got the logs, you may post the complete logs here, it may help to determine the cause of the issue.
    Regards,
    Melon Chen
    TechNet Community Support
    Thank you very much for your reply. I could access in OWA successfully with a quick response and used this as a workaround. There was not too many logs to go from.
    It looks like there was a server that was decommissioned around 6 months ago and just a test thought I would start this up to see if our voicemail server had any relationship with it - once I started this server up, voicemails
    were opening quickly will all users. I am not sure if our voicemail  software (Cisco Unity) is pointing to our old server or if has anything to do with DNS entries but will need to dive into this further as we cannot have the old server online for too
    much longer.
    If anyone would have an inclining as to what this could be, please let me know.
    Thanks again.

  • Photo in video cut when going from "Quick" to "Expert"

    I created a video using Premiere Elements 11. I used a video I took on a Canon T3I and pics saved on the computer and edited using Photoshop Elements 11.   I created the video with the Premiere Elements 11 set to "Quick." With the video created this way it worked fine and it up;loaded to you tube and worked perfectly on there.  I then opened the completed video file and saved a copy. I then opened the copy and clicked the "Expert" button. After the screen had changed to go from "quick" to "expert"  I noticed that one of the pics in the video was cut and replaced with a red and black screen that says  "media off-line" in several languages. The caption from the original pic is still there but when I play the video on Premiere Elements 11 the picture is not there and when the video plays it shows the red and black media offline screen.  The pic that was eliminated is a .tiff file. what happened to that pic and how can I fix it? Thanks.

    Henry XYZ
    I suspect that somewhere along the line you moved the source media that went into the project.prel after the project prel (project file) was saved closed. Let us see.
    But, I need to go through your details to see where that might have happened. I want to make sure we are distinguishing between import source media, source media on the Quick view Filmstrip, source media on Expert view Timeline, and the export of the source media to a file.
    1. You set up a project with video and photo content in the Quick view. And, uploaded that to YouTube. Am I correct that the uploaded to YouTube was from Quick view Filmstrip via Publish+Share/Online/YouTube?
    2. What did you save when you wrote
    I then opened the completed video file and saved a copy.
    Was that a copy of the project.prel (project file) that you saved via File Menu/Save A Copy or something else?
    3. Then you wrote
    I then opened the copy and clicked the "Expert" button. After the screen had changed to go from "quick" to "expert"  I noticed that one of the pics in the video was cut and replaced with a red and black screen that says  "media off-line" in several languages.
    Assuming that is the copy of the project.prel file and given that you switched to the Quick To Expert view and noticed a missing photo (.tif) when viewing in Expert view, what next?
    a. When you first opened the project.prel copy, apparently it opened in Quick. Did you see the photo at this point?
    b. When you went to Expert view and found the photo missing, did you go back to Quick? If so, was the photo still there?
    4. Do you have any drive letter changes going on in all this? Where is the source media for this project saved?
    Please review. Your reply will help us to help you resolve this matter.
    It is not uncommon for the Quick view not to offer features or present as does the Expert view. But I have rarely if ever run into instances of the reverse.
    So, please check the save location of the "missing" photo in Expert as to what is going on there. Premiere Elements project has only copies of the source media and these copies link back to the originals at their hard drive save location.
    Thanks.
    ATR

  • Logs flooded with CGSResolveShmemReference when going from 10.5.7 to 10.5.8

    Could someone please explain to me what changed with respect to "CGSResolvShmemReference" between 10.5.7 and 10.5.8.
    I just upgraded to 10.5.8 earlier today and applied the latest security patch and I'm getting these messages in my logs:
    CGSResolveShmemReference: reference offfset (xxxx) exceeds bounds (xxxx) on shmem obj 0x<hex number>.
    I'm getting this from a LOT of apps, from the Dock, iMovie, iPhoto, iShowU, Firefox, Thunderbird, Finder, VirtualBox, etc etc
    I have a large memory Mac Pro config that seemed to "behave" much better with 10.5.7 (I have 13GBs of RAM). I could run 4-5 Virtualbox guest VMs, multiple browsers, do screencapture of screencasts, edit the screencasts in iMove, run different browsers and email cients, etc etc, all without my mac breaking a sweat (well at least not a heavy sweat).
    Now, nothing seems to behave. iMovie is unstable, firefox will slow down and speed up, thunderbird too, iShowU will have MISSING menu lists when selecting a menu drop down, iMovie will do the same, iPhoto doesn't seem to pick up all the albums I have, at least not between invocations consistantly, and I can't do the same tasks concurrently that I used to with 10.5.7 because of little quirks as previously explained or in the case of iShowU and/or iMovie, it will just crash.
    10.5.8 from my perspective is JUNK because it makes me LESS productive than 10.5.7 with all these little inconnsistant application quirks that have started since I went to 10.5.8.
    Ever since I upgraded, my apps have misbehaved and my logs are inundated with these messages so I have to believe the issues are related. I really don't want to re-install from scratch JUST to get back to 10.5.7....
    Could someone please expalain... and please don't pull any punches (I'm technical).
    Bob

    Of course not.  Computers always work perfectly.  Upgrades are always flawless.  User data is never lost.  Disks never fail.  Corruptions never occur.   Power is completely reliable.  :-)
    But back here on Planet Earth, where bad things do occasionally happen to good data, yes, always have backups of your files.  At least the data that you care about.
    The OS files?  Useful for fast(er) recoveries, but available from distributions if lost.  Those files can be recovered.  But your own unique user-local files?  Definitely have copies of those.
    Somewhat more seriously, that you're even asking this question could imply you're not already running Time Machine or related archival processing; that you're not creating your own regular backups.  If that's the case, then your data is already exposed to corruption, loss, user error, and to intentional deletions that can sometimes be initiated by miscreants subsequent to a security breach.
    But if you do have a Time Machine backup configured and going, you can directly trigger a backup to get the latest copies of the files (if you've been making any changes since the most recent TM backup) and allow it to run to completion, then do your upgrade.

  • Porting issues with boost::regex when going from CS6 to CC2014 using Xcode

    I have a working project in CS6 that uses the boost::regex framework that I'm having problems porting into CC2014.
    I ported this project by using Dolly to create a new project, then coping the old source files across, finally updating the various out dated InDesign API calls that appeared when I compiled. For the use of regular expressions I added the debug and release builds of the boost_regex.framework to the respective targets.
    Now, for the debug build the new CC2014 projects builds happily. But when I switch to the release build I get a few linker errors. They are all something like:
    Undefined symbols for architecture x86_64:
    "boost::re_detail::get_mem_block()", referenced from:
    boost::re_details::perl_matcher<__gnu_cxx::__normal_iterator<char const *, std::string>, std::allocator<boost::sub_match<__gnu_cxx::__normal_iterator<char const *, std::string> > >, boost::regex::regex_traits<char, boost::cpp_regex_traits<char> > >::find_imp() in SbRegex.o
    etc.
    I did a bit of reading through the boost header files. The odd thing is that the "get_mem_block()" appears to be defined for the pre-processor option BOOST_REGEX_NON_RECURSIVE, while in the project settings for BOOST_PREPROCESSOR_DEFINITIONS contains BOOST_REGEX_RECURSIVE. These two settings are mutually exclusive and there's pre-processor logic that blocks having both cases defined at once.
    This recursive option is used to control how memory is used while processing a regular expression, so seeing a get_mem_block() call (other link errors involve a call to put_mem_block) sort of makes sense being calls that look like something to do with memory.
    I'm trying to figure out why debug builds, but release build fails. Does this problem look familiar to anyone? Anyone have any suggestions to try to fix it?

    Thanks for the reply, Bartok, but those didn't seem to work for me. Maybe I applied them incorrectly as that thread was for the Win platform and not Xcode and I might have translated the solution poorly.
    Basically I went to the "Release_Cocoa64" target, and scrolled down the "Build Settings" page. I then edited the BOOST_PREPROCESSOR_DEFINITIONS field.
    First I tried just appending BOOST_SYSTEM_NO_DEPRECATED.
    Second I thought that this might be a macro of some sort so I tried $(BOOST_SYSTEM_NO_DEPRECATED).
    Finally, I deleted all the previous values and added "BOOST_ALL_DYN_LINK BOOST_REGEX_USE_CPP_LOCALE BOOST_REGEX_RECURSIVE BOOST_HAS_ICU=1 BOOST_ FILESYSTEM_VERSION=3 BOOST_CHRONO_HEADER_ONLY BOOST_SIGNALS_NO_DEPRECATION_WARNING".
    As you might guess from the experimentation I got none of these to work. The error that I was getting has remained exactly the same.
    One difference that I assumed between the Win and Xcode version is that Win separates the values with a semi-colon whereas Xcode separates with a space.
    My only other thought is maybe I edited the wrong field. Is BOOST_PREPROCESSOR_DEFINITIONS the one?
    As a final comment, the thread you gave me and my issue really comparable? I have other projects that don't use the boost::regex libraries and they build and run without issue. It's only when I try to use boost's regular expressions in a release build that I get problems when linking (debug build is still fine).
    Also the link error looks different. The thread that you gave me points at "boost::system::error_category" as not being resolved, while I have problems resolving "boost::re_detail::get_mem_block".
    I don't seem to have problems with basic boost - just the regular expression stuff.

  • Low audio when going from Xpress Pro to DVD SP

    When I output from Avid Xpress Pro to DVD SP I get low audio on the final DVD.
    I export my Xpress Pro sequences as QT References with the audio as an AIFF file. I was able to improve the audio a bit by going into APack and converting the AIFF to an AC3 file. Even after boosting all the audio in the sequence (back in Xpress Pro) 10DB it's still not great. Any ideas?

    Mix your audio as hot as you can in the Avid...if you are using the -27 Dialogue Normalization setting, you are going to get the levles cut considerably. Use -31 (IIRC) instead...

  • Time Machine Issue when going from WiFi Network to Ethernet cable

    I have my WD network drive attached to my router so I can do Time Machine backups wirelessly. I updated my ancient Mac to Snow Leopard the other day for software reasons, and when I went to backup via Time Machine it said I had 4.6GB to backup. Ok. Don't understand why, but assume it has to do with the OS update. I thought it would quicker to do it through the Ethernet cable, but when I unplugged it from the router and into the Mac Time Machine said it couldn't locate it. that seemed very, very odd. I put it back into the router, and it re-appeared. The bummer is, after two days it's less than half way through the backup. I'm just going to keep it going and hope for the best, but if anybody has any thoughts on this Im all ears.

    I decided to change the external drive setup to be a wireless drive over our home network, plugged into my Airport Extreme
    Unfortunately, Apple does not support Time Machine backups to a drive attached to the USB port on the AirPort Extreme.
    Some users seem to be able to make this work anyway, some have some success and some have no success. At best, it is not a reliable method to protect your data.
    Time Machine stores backups differently depending on whether the drive is attached directly to your Mac compared to a drive that works over a network.
    That's why Time Machine will make a complete new backup of your Mac when the drive is located at the AirPort Extreme. It may well be that there is not enough space on the drive to allow this.
    Options...
    1) keep the drive attached to your Mac. This is supported and works well.
    2) Erase the drive or add a new drive and start over with a new complete backup on the drive at the AirPort Extreme
    If you go for #2, I would suggest that you also develop a secondary backup plan in case things do not work out.
    I've experimented 3-4 times with Time Machine backups at the AirPort Extreme and in each case.....they work fine for a few weeks or so. Then I get messages that the backups have become corrupted and I have to "repair disk". This works a few times until I cannot repair the disk and must erase the drive and start over again.
    Your resullts, may of course be different.

  • Session is lost when going from a servlet to a jsp

    Any help would be greatly appreciated.
              I can sucessfully go from my jsp page to the Servlet. When in the servlet I have a service method where I place the information from my form on the jsp on a bean. Then I do a session.setAttribute("aBean", aBean) to place the bean in the session. Then do a req.sendRedirect("my.jsp"). Watching it in the debugger, when we leave the servlet our session is cleared and when we do a jsp:usebean to get the bean session from the session it creates a new bean so all the information is gone that was there before. here is my usebean tag where we are getting it from scope,
              <jsp:useBean id="aBean" scope="session" class="com.MyBean"></jsp:useBean>
              Thanks, Trucker

    <jsp:useBean name="helper" scope="session" class=".."/>
              <jsp:useBean name="helper" scope="session" type=".."/>
              ·class="package.class"
              Instantiates a bean from a class, using the new keyword and the class constructor. The class must not be abstract and must have a public, no-argument constructor. The package and class name are case sensitive.
              ·type="package.class"
              If the bean already exists in the scope, gives the bean a data type other than the class from which it was instantiated. The value of type must be a superclass of class or an interface implemented by class.
              If you use type without class or beanName, no bean is instantiate
              In your case you already instantiated the bean “com.MyBean” in servlet and you set bean in session scope. But you are not accessing that bean from servlet. Instead of that you are crating a new bean instance by using class attribute of <jsp: useBean>. So if you want to access the bean already created in servlet you should use type attribute instead of class in <jsp: useBean>. So you have to change your code as follows.
              <jsp:useBean id="aBean" scope="session" type="com.MyBean"></jsp:useBean>
              Then you will not lose the bean created in servlet.
              - Navaneeth

  • When going from Gmail to google calendar I get an error message that the google is asking for a redirect that cannot complete. This works fine in IE, but not my beloved Firefox. I have the default cookie settings still in place

    When looking at my gmail, I want to open google calendar, but get the above error message. Cookies are enabled, default settings are still I place. This works fine when I use IE. HELP!

    This issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    * http://kb.mozillazine.org/The_page_is_not_redirecting_properly

Maybe you are looking for