ToC in CS4 crashes but not in CS3

Hi, i'm new to CS4 and i'm having a huge problem with a ToC in a book, everytime i try to update it, InDesign crashes, without prompting any error message, it just quits and disappears. I thought it had something to do with my document, though i couldn't put my finger on it. But this morning i tried with an older CS3 document, opened it in CS4 and it crashes too. It does not crash in CS3. Even more strange, i did another new document to build another ToC (in case it was my document that was corrupt or something) and it was working fine... but all of a sudden it stopped working and started crashing, i didn't make any changes, just reupdated it
Is there something that changed drastically in how InDesign handles the ToC? Maybe i'm doing something wrong since i kind of just figured it would work the same as in CS3.
Or maybe it's because we're still using MAC OS 10.4 ??
Any help would be wonderful!
Thanks in advance.

humm maybe my message was confusing, it's the native CS4 file that is crashing, in my book (book panel) in CS4.
The test i did was to take a native CS3 document, opened it in CS4 and it started crashing too, while the same document would not crash in CS3.
Therefore my problem is with eitheir native and/or converted file in CS4...
though you make me think, i'm gonna try to export my book in INX just for fun and open it in CS3 see if still crashes... though it will not be a long term solution because we noticed that converted INX files tend to have textbox lenght issues...
edit : after the test above, i now confirm that my problem is with CS4, because when i export my CS4 document into a CS3 (inx) one, my ToC works fine
and we cannot use CS3 for that document, it needs to be in CS4...

Similar Messages

Some programs crash but not in safe mode or for guest user

Hoping that some talented and kind Mac wizard will help me solve a bizarre problem: Some but not all of my programs have started crashing immediately upon launch, but not in safe mode, nor when I log in as a guest user.
The problem began on February 5th, right after I installed an update to my OS (bringing it up to version 10.7.3), which included an update to the firmware for my computer, a Mac mini from mid-2010. The programs that began crashing upon launch *may* be those that were open at that time, but I can’t be sure. They include Adobe Reader, Picasa, Word for Mac, and a sweet little utility called uCalendarX.
Specifically what happens with, say, uCalendarX, is this: After I launch it, nothing appears on screen for a few seconds, and then comes a message that it is trying restore its windows, with a choice of whether to attempt restoring them or not. After a few more seconds comes the news that it has quit unexpectedly. The first several dozen lines of the crash log appear at the end of this posting.
So far my troubleshooting has revealed the following:
(a) When I reboot in safe mode, the programs that crash now work normally.
(b) When I boot the usual way but log on a guest user, the programs that crash now work normally.
(c) Fully emptying the trash made no difference.
(d) The problem was not solved by restoring my hard drive (via Time Machine) to its state the day before I downloaded that update to the OS and the firmware. (This was a drastic step, the intervention of last resort, and I was sure it would work. But no. Perhaps I did not go back far enough for the restoration.)
(e) Deleting the plist files and plist.lockfiles made no difference.
(f) Deleting the files for the app under Saved Application States made no difference.
(g) Disabing the user’s font cache (as happens in safe mode) made no difference.
(h) Uninstalling Adobe Reader, emptying the trash, downloading the latest version, and installing that made no difference – this latest version newly installed continues to crash (but not for a guest user, nor for me, the administrator, in safe mode).
(i ) Repairing permissions on the hard drive made no difference.
I will be mighty grateful for a solution to this perplexing, vexing problem!
B.t.w., I don’t know Unix but was able to do all those (fruitless) interventions listed above.
Gordon Bear
Ramsey NJ U S A
The log from one of the many crashes of uCalendarX begins as follows:
Process: uCalendarX [750]
Path: /Applications/uCalendarX 3.2.3/uCalendarX 3-2-3.app/Contents/MacOS/uCalendarX
Identifier: com.riuz.ucalendarx
Version: 3.2.3 (3.2.3)
Code Type: X86 (Native)
Parent Process: launchd [289]
Date/Time: 2012-02-20 00:38:48.931 -0500
OS Version: Mac OS X 10.7.3 (11D50b)
Report Version: 9
Interval Since Last Report: 2463 sec
Crashes Since Last Report: 3
Per-App Interval Since Last Report: 30 sec
Per-App Crashes Since Last Report: 3
Anonymous UUID: 0CA8DA26-8927-4AC3-B35F-3B2E9FD65A8E
Crashed Thread: 4
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000008bcc45ab
External Modification Warnings:
Thread creation by external task.
VM Regions Near 0x8bcc45ab:
 CoreServices 0000000004fd0000-00000000051ee000 [ 2168K] rw-/rwx SM=COW
-->
 __TEXT 000000008fe52000-000000008fe85000 [ 204K] r-x/rwx SM=COW /usr/lib/dyld
Application Specific Information:
objc[750]: garbage collection is OFF
Thread 0:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x920136e6 __open + 10
1 libFontParser.dylib 0x9cc5b403 TFileDescriptorContext::TFileDescriptorContext(char const*) + 77
2 libFontParser.dylib 0x9cc5b1c5 TFileDataReference::TFileDataReference(char const*) + 65
3 libFontParser.dylib 0x9cc5b056 TFileDataSurrogate::TFileDataSurrogate(char const*, bool) + 136
4 libFontParser.dylib 0x9cc59af3 TFont::CreateFontEntitiesForFile(char const*, bool, TSimpleArray<TFont*>&, bool, short, char const*) + 2581
5 libFontParser.dylib 0x9cc58a7a FPFontCreateFontsWithPath + 193
6 libCGXType.A.dylib 0x950164b0 create_private_data_with_path + 26
7 com.apple.CoreGraphics 0x95349ecf CGFontCreateFontsWithPath + 33
8 com.apple.CoreGraphics 0x95349b09 CGFontCreateFontsWithURL + 442
9 com.apple.CoreText 0x90e1c1aa TCGFont::TCGFont(__CFURL const*, bool) + 90
10 com.apple.CoreText 0x90e1bfb2 TCGFontCache::CopyFont(__CFURL const*) const + 92
11 com.apple.CoreText 0x90e1be6c TBaseFont::CopyNativeFont() const + 50
12 com.apple.CoreText 0x90e1bd6f TTableStore::CopyTable(unsigned int, TCFRetained<__CFData const*>&) + 81
13 com.apple.CoreText 0x90e1bade TBaseFont::CopyTable(unsigned int) const + 72
14 com.apple.CoreText 0x90e1ba0f TcmapTable::TcmapTable(TBaseFont const&) + 31
15 com.apple.CoreText 0x90e1b8fd TBaseFont::GetGlyphsForCharacterRange(CFRange, unsigned short*) const + 27
16 com.apple.CoreText 0x90e1b79b TASCIIDataCache::TASCIIDataCache(TBaseFont const*) + 83
17 com.apple.CoreText 0x90e1b70f TBaseFont::CreateASCIIDataCache() const + 47
18 com.apple.CoreText 0x90e1b690 TFont::InitAdvanceCache() const + 42
19 com.apple.CoreText 0x90e1b4ad TASCIIEncoder::Encode() + 45
20 com.apple.CoreText 0x90e4433f TGlyphEncoder::EncodeChars(CFRange, TAttributes const&, TGlyphList<TDeletedGlyphIndex>&, TGlyphEncoder::Fallbacks) + 925
21 com.apple.CoreText 0x90e19ff6 TTypesetterAttrString::Initialize(__CFAttributedString const*) + 322
22 com.apple.CoreText 0x90e19b9d CTLineCreateWithAttributedString + 47
23 com.apple.HIToolbox 0x963d2b2d TCoreTextEngine::LayoutSingleLine(THIThemeTextInfo*, float) + 23
24 com.apple.HIToolbox 0x963d2a9a TCoreTextEngine::Layout(THIThemeTextInfo*, float, float, TextLayoutType) + 64
25 com.apple.HIToolbox 0x963ad2c9 TCoreTextEngine::VerifyLayout(THIThemeTextInfo*, float, float, LayoutIntent) + 309
26 com.apple.HIToolbox 0x96410b0a TCoreTextEngine::GetThemeTextDimensions(float, THIThemeTextInfo*, float*, float*, float*) + 54
27 com.apple.HIToolbox 0x9640fc51 DataEngine::GetTextDimensions(void const*, float, HIThemeTextInfo*, float*, float*, float*) + 283
28 com.apple.HIToolbox 0x963d1fc5 HIThemeGetTextDimensions + 187
29 com.apple.HIToolbox 0x963d1ca3 HIMenuBarView::MeasureMenuTitle(MenuData*, unsigned char, float*, int, unsigned char*) + 451
30 com.apple.HIToolbox 0x963d1a49 HIMenuBarView::MeasureAppMenus() + 261
31 com.apple.HIToolbox 0x963abb5d HIMenuBarView::EnsureBarLayout() + 489
32 com.apple.HIToolbox 0x963ab152 HIMenuBarView::DrawSelf(short, __HIShape const*, CGContext*) + 520
33 com.apple.HIToolbox 0x963aac22 HIView::DrawCacheOrSelf(short, __HIShape const*, CGContext*) + 86
34 com.apple.HIToolbox 0x963aaa42 HIView::SendDraw(short, OpaqueGrafPtr*, __HIShape const*, CGContext*) + 124
35 com.apple.HIToolbox 0x964395c7 HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned long, HIView*, CGContext*, unsigned char, float) + 755
36 com.apple.HIToolbox 0x964398b9 HIView::RecursiveDrawComposited(__HIShape const*, __HIShape const*, unsigned long, HIView*, CGContext*, unsigned char, float) + 1509
37 com.apple.HIToolbox 0x9643a86b HIView::DrawComposited(short, OpaqueGrafPtr*, __HIShape const*, unsigned long, HIView*, CGContext*) + 1227
38 com.apple.HIToolbox 0x9643a9b3 HIView::Draw(short, OpaqueGrafPtr*, unsigned long) + 81
39 com.apple.HIToolbox 0x9643ad7b HIView::Render(unsigned long, CGContext*) + 45
40 com.apple.HIToolbox 0x963d084f WindowData::PrepareForVisibility() + 137
41 com.apple.HIToolbox 0x963cf893 _ShowHideWindows + 355
42 com.apple.HIToolbox 0x963cf728 ShowHide + 44
43 com.apple.HIToolbox 0x96399b09 _GetMenuBarWindow + 872
44 com.apple.HIToolbox 0x96399765 GetMenuBarView(MenuData*, unsigned char) + 74
45 com.apple.HIToolbox 0x963a2f3a MBarMenuRgn + 26
46 com.apple.HIToolbox 0x963a2d27 _ZL7ShowBar21MenuBarAnimationStylehhh + 281
47 com.apple.HIToolbox 0x963cd42a _ZL21UpdateAggregateUIMode21MenuBarAnimationStylehh + 772
48 com.apple.HIToolbox 0x963e38e5 ShowMenuBar + 163
49 com.apple.AppKit 0x001a9cad -[NSApplication finishLaunching] + 1331
50 com.apple.AppKit 0x001a9374 -[NSApplication run] + 142
51 com.apple.AppKit 0x0043d261 NSApplicationMain + 1054
52 com.riuz.ucalendarx 0x00001eea _start + 216
53 com.riuz.ucalendarx 0x00001e11 start + 4

Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
So the mystery continues, but these additional facts will help with the diagnosis, I hope.
Thanks again for your suggestion.
Gordon

I need to re-install my inDesign 5.5 but don't have my licence no for the previuos version (3). My 5.5 has been registered on my Adobe-account, but not the CS3, what can i do?

I need to re-install my inDesign 5.5 but don't have my licence no for the previuos version (3). My 5.5 has been registered on my Adobe-account, but not the CS3, what can i do?

Why do you need InDesign CS (that is version 3) or InDesign CS3 (that is Version 5) to install InDesign CS5.5 (it is version 7.5)?
If it is an upgrade and asks you to input your serial of an older version, you have to get an find it. No one will help you here. If you can't find it and if you have not registered it, you are out of luck. You will have to spend money for a new version.

CS3 to CS4/CS5-- Book TOC crashes but not in chapters

Hi, i'm having a conversion problem again,
i'm working within a book (like always) and i have a main TOC, that regroups styles from all the documents, in CS3 i had no problem with it, but in CS4/CS5 it makes ID crash and i have no idea why. the thing that is even more strange is that every document inside the book has its own TOC (with more styles) included, and they do not crash my InDesign. It seems to be only the one that "reads" the styles across the book that do so.
Anybody has an idea why?
i get this error message :
Thanks in advance!
Message was edited by: korinsama

edit that needed a bump :
since my TOC in for the book differs from the TOC in each chapter, i tried importing the one from the chapters (the one that technically doesn't crash)
... but once in the book TOC when i check 'include book documents" ... well... it crashed... so i'm guessing it's not the TOC styles that have a problem but the fact that i'm trying to apply it to the whole book ..... which... is really problematic...
retested the original TOC, just unchecked the "include book documents" and it didn't crash..... i wish there was a detailed crash log so i could understand what's going on... it's kind of ridiculous that i can generate a single document TOC but not the exact same one applied to a book....
soooo the good news is, i can generate each chapter individually and copy/paste into the main TOC, which is good since in earlier version of INDD, copy/pasting TOC made it crash.. and it doesn't anymore
Message was edited by: korinsama

Problem Encoding WMV to FLV with Media Encoder CS4 (but not with CS3)

Hello,
I have been attempting to encode some WMV files with Flash Media Encoder CS4 (I have Adobe Creative Suite CS4 installed) but it has failed, generating this error:
- Source File: C:\Documents and Settings\usf\Desktop\incoming\ch01.wmv
- Output File: C:\Documents and Settings\usf\Desktop\incoming\ch01_3.flv
- Preset Used: Custom
- Video: 624x343, Same as source [fps]
- Audio: MPEG Layer III (MP3), 128 [kbps], Stereo
- Bitrate: VBR, 400.00 [kbps]
- Encoding Time: 00:06:36
5/28/2010 11:26:16 AM : Encoding Failed
Error compiling movie.
Unknown error.
On another computer where Adobe Media Encoder CS3 is installed (with Creative Suite CS3), I experience no such problem. I do notice that when I add the WMV to Adobe Media Encoder CS3, it opens a window that prompts me to use "ffdshow", which will apparently work if it's configured to decode the file. I click "OK" and start the queue in the encoder. A few minutes later I get a successfully encoded FLV file.
I have come to question whether Adobe Media Encoder CS4 should be re-installed, whether the entire Suite should re-installed, or if there is some patch or fix I can install somewhere. Adobe Media Encoder CS4 is installed on my "production" computer which also has Adobe Premiere Pro (CS3) and Adobe Premiere Elements (7).
Could use some advice here.
Glen
P.S. the files will also not export to FLV using Adobe Premiere or Premiere elements...

Again, the reason we are capturing with Windows Media Encoder is because we tried using Live Flash Encoder to capture directly into flash but our equipment wasn't fast enough and it was dropping frames all over the place. We also don't have the space to capture into an uncompressed format because we don't have the available storage, and our events can be 8 hours long or more (each video is about 15 minutes, 20 or more videos)
Ive listened to everything in my workflow and it sounds fine until the outputted FLV file from AME.
WME is capturing at the following specs:
160kbps 48KHz Windows Media Audio 9.2 codec (stereo) 1 pass CBR
1800kbps 1 pass CBR video
29.97 fps
640x360 resolution
buffer size: 5 seconds
key frame interval: 8 seconds
I have verified this with a codec info utility I ran on the wmv files.
AME is encoding with the following specs:
FLV Multiplexing
On2 VP6 codec
620x360 resolution
800kbps 2 pass VBR
100% undershoot at best quality
160kbps stereo MP3 audio
I verified the above with the same codec info utility (gspot 2.70a) and it is all acurate, it also told me that the audio is at 44.1KHz rather than 48 (there was no place to specify this, is this a limitatino of the VP6 codec?)
Yes, these are our source assets. They're being captured either through an XL2 via firewire, or from an analog program feed converted to firewire via a Canopus converter box.
If anyone has any suggestions on how to get rid of this, or a different encoder (either to capture with rather low cpu resources, or to encode into flash) let me know. I can provide a sample of the clipping if you need
Thanks,
Peter

CS4 Install does not remove CS3

I installed CS4 Web Premium 4 over CS3 Web Premium and CS3 still exists in the folders, but not in the "remove programs" file.
How can I remove CS3? And its programs?

I do not intend to imply that you can use the DW apps simultaneously, though. You cannot. -- Murray "Murray" <[email protected]> wrote in message news:[email protected].. > Just so you'll know, all such installations occur as stand-alone apps. > They > have never removed the previous version - they are completely independent > installs. So it's possible to have Dreamweaver 4, 6, 7, 8 CS3 and CS4 all > installed and usable at the same time. > > -- > Murray >

Code works in DW8 but not DW CS3

Why would the following code work in Dreamweaver 8 but not in
Dreamweaver CS3?
Expires in
<select name="mnuExpires" id="mnuExpires">
<option value="0"
>0</option>
<option value="30" <% if true then
response.write("selected") %>
>30</option>
<option value="60"
>60</option>
<option value="90"
>90</option>
<option value="120"
>120</option>
</select> days.
Dreamweaver CS3 shuts down after throwing an error: "Adobe
Dreamweaver CS3 has encountered a problem and needs to close. We
are sorry for the inconvenience." Event ID 1000 appears in the
Application Events Log.

Brad Boyink wrote:
> Dreamweaver CS3 shuts down after throwing an error:
"Adobe Dreamweaver CS3 has
> encountered a problem and needs to close. We are sorry
for the inconvenience."
> Event ID 1000 appears in the Application Events Log.
http://www.adobe.com/go/kb402776
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Application crashes, but not in new user account. How to fix?

Like many others on the forum, I have experienced frequent crashes in SL in Mail, Safari, Powerpoint, and other applications, particularly when adding an attachment to an email message or inserting an image file in a presentation slide. Did all the usual maintenance things such as verifying and repairing permissions, reinstalling SL, trashing virus protection apps, etc. Crashes persisted. However, I created a new user account and when working in that account the crashes do not occur.
What does this suggest about the nature of the problem and how do I resolve it, preferably without migrating all my files over to the new user account.
Many thanks.

Open Directory Utility. You will find it in Applications/Utilities.
Click the lock to make changes and enter your admin password.
Go to the menu bar: Edit > Enable root user.
Follow the instuctions to create the System Administrator (Root) user.
Do not use the same password that a regular user already has. Do not use a trivial password.
Log out the current user.
In the log in window, enter root as the user name.
Enter the password that you just created.
You now have access to all User accounts, folders and files. Move the files you need from the old account to the working one. For example move the contents of your old Documents folder to the new Documents folder. This is easiest if you open two Finder windows and place them side by side. repeat this for the other folders in your old user space with one exception. *Do not* copy the contents of the Library folder.
There are a couple of things in the Library folder that you probably do want. To retrieve your email, copy the contents of the Mail folder. If you have installed fonts in your user space copy those too.
Let your new Library manage itself from then on. Your apps will place preference files etc in the appropriate folders as they are launched.
You should also give the working account admin priviliges. (System Preferences > Accounts)
Be very careful whilst logged in as root. The main Library and System folders are no longer protected and nothing requires a further password entry. Do what you need to do and get out of there.
When you are finished log back in to the working account and open Directory Utility once more.
Go to Edit > Disable root user.
Keep the old user account on the drive for a while until you are sure everything is working correctly and nothing is missing.

Networked files show padlock (can't open) in Bridge, but not PS CS3

When looking at files on a network in Bridge CS3, they all show a padlock in the upper right corner of the icon representing the file and cannot be accessed via Bridge, but they are not locked. The same files can be seen, and opened (no padlock) in Photoshop CS3. Any suggestions?

Great, thanks Ian. This worked a treat. I'd forgotten that I needed to download that again. Cheers. Thanks for your help. Marc.

920 settings menu, mail, camera crashes but not al...

My 920 is doing weird things since last weekend.
I installed some weather apps and the new foursquare app and ever since then when freshly booted after some time my 920 decides to do some strange things:
It takes like 5-10 seconds to display the unlock screen
Screen is very dim
Some apps will no longer start
Email
Settings
Camera
Internet Explorer
and probably a few others.
Strangely enough most other apps will work fine (angry birds, wordament, calculator, nokia music, xbox music etc.)
Also email, calls etc will still be comin in (albeit I cannot open the emails). Also switching between applications is VERY slow when this happens.
I have since removed above mentioned apps (to no avail), rebooted (which helps for a short period)
Also i've been in a reboot loop of some kind for like half an hour where it would only show the nokia logo, reboot, show logo and so on. This booted through eventiually.
I have tried:
Soft reset
Settings->about->factory defaults, with backup restored
Hard reset through buttons method, with backup restored
Hard reset through buttons method, clean (so no backup restored)
Flashed the phone with the most recent firmware
All this has not helped and I cannot find the source of the problem, I've eliminated nearly all thinkable options.
disabled wifi
flight mode
stopped my mail accounts from syncing
disabled mail from my live ID
removed facebook account
removed skype
Under all these conditions the problem has come up, wheter I am using the phone at that particular time or not.
I am at a loss as what this could be and am on the verge of sending the phone back.
Does this problem sound familiar to anyone? And if so, some pointers?
Solved!
Go to Solution.

This issue is really strange, Yesterday I used the phone the whole day with a fresh boot in the morning and a single "crash" in the evening and today it has already "crashed" 4 times within 2 hours. And a short boot loop of about 10 minutes.
I also noticed that the rotation sensors are not working anymore when the phone gets in this state.
Oh and I mentioned that the calculator seemd to work, but this is wrong. It also crashes.

Pen Pressure works.. but not in Cs3? Please help

Hi there
I'm having a problem with the pen pressure dynamics on CS3. They can't be changed.
If I change it to 'pen pressure' I get a little yellow marker next to it which I assume means its not registering or recognizing.
http://i571.photobucket.com/albums/ss154/Peardan/Yellow_error.jpg
The tablet I use is Wacom Intuos (I think its the original) http://i602.photobucket.com/albums/tt110/thedeekin/forsale/Intuos1.jpg
I know for a fact that the pen pressure works because I have a program that tests it.
http://i571.photobucket.com/albums/ss154/Peardan/Stupidthingdunwork.jpg
That blue bar goes up the harder I press so I know its working..
Every method of fixing has been tested:
Driver in the box, Latest drivers, Every driver that was available for download,
Unplug and plug,
Ctrl+Alt+Shift.
10million pc restarts.
It has always worked fine on my old computers which where xp, no problems but I got a new computer with 64bit Windows7.
As far as I can tell its photoshop thats not letting it work. CS3 is fully updated and works great aside from this problem which is stopping everything.
Thanks for the help.
I want to draw..

Ok its fixed! Thanks guys!
Exactly what I did for those who want to know:
Opened photoshop with Ctrl+Alt+Shift and hit the pop up button
I then made the brush settings to normal and not pen pressure and closed it down.
Start -> Control Panel -> Programs/Uninstall a program -> Uninstalled Wacom tablet file
Went onto that link provided http://www.wacom.com/downloads/drivers.php
Selected Intuos GD and Windows 7.
I then downloaded the oldest driver down the bottom (Which apparently was the first one compatable with windows 7)
Installed and accepted the restart notification.
Before I checked Photoshop I opened Paint and tested the pen pressure on various brushes and kept it open
Then opened photoshop and put the settings on pen pressure again and it worked!
Doing it exactly like that was what seemed to get it working propperly.
Thank you again!

Excel file causes 2008 to crash but not 4.5

I have an excel file that is give or take 5MB which controls an excelsis dashboard, I have no issues with the spreadsheet on 4.5 but as soon as I load it into 2008 and try to create a .swf excelsius crashes (even with a blank model).
The file has quite a few vlookups and concatenate's with data in xs of 13,000 rows.
Can anyone give me any hints, does 2008 have more problems dealing with excel formula than 4.5 did?

Gregory,
Here are a few thing to try:
1. Before opening Xcelsius have you ensured that there are no background istances of Excel running (use Ctrl +Alt + Delete) to view process running in background. If so, end the process.
2. If this does not work, try uninstalling, restarting you PC, and reinstalling X2008 again. This is probably the desired route if you can't even get a blank model to open. We had to do this as well.
Hope this helps!
Xcelsius Gurus
http://www.everythingxcelsius.com
"Xcelsius Gurus share tips, reviews, tricks and much more!"

Premiere CC crash but not CS6

Premiere CC crash - period!
Before it crash on start-up it also crashed when I tried to render longer project. The message say "applications running out of memory". But CS6 is runing fine. Something wrong with the CC version of Premiere Pro? Does it need more memory then CS6?
Frustrating to say the least...

Exactly what is inside the files?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Can adjust page elements in MX, but not in CS3

I don't know what to call this problem, so couldn't do a
search on this forum. I have two computers, one of which runs
Dreamweaver MX, the other of which runs CS3. I can access different
elements of a particular set of web pages in MX, for example
resizing a photograph. But in CS3 all the page elements within the
"contents" div tag highlight as one single element, so that, for
example, if I try to delete a single word of text, the entire
contents--pictures, text, etc.--gets deleted instead. I made these
pages in MX. I'm guessing that there is some default setting in CS3
that is preventing me from accessing the individual content
elements. Here is a sample page:
http://www.colorado.edu/English/faculty/facpages/winokur.shtml
Can someone help me out? Thanks in advance.

> for example resizing a photograph
Never resize a photo or any image from within DW. Load the
image in your
image editor and resize it there. If you do it in DW you
aren't actually
changing the size, merely squeezing or stretching it thereby
diminishing its
quality. And if you reduce the size (in DW) you have a
visually smaller
image but the pixel size (weight) doesn't reduce.
Walt
"Zaphod234" <[email protected]> wrote in
message
news:g4k4j2$atk$[email protected]..
>I don't know what to call this problem, so couldn't do a
search on this
>forum.
> I have two computers, one of which runs Dreamweaver MX,
the other of which
> runs
> CS3. I can access different elements of a particular set
of web pages in
> MX,
> for example resizing a photograph. But in CS3 all the
page elements within
> the
> "contents" div tag highlight as one single elements, so
that, for example,
> if I
> try to delete a single word of text, the entire
contents--pictures, text,
> etc.--gets deleted instead. I made these pages in MX.
I'm guessing that
> there
> is some default setting in CS3 that is preventing me
from accessing the
> individual content elements. Here is a sample page:
>
http://www.colorado.edu/English/faculty/facpages/winokur.shtml
> Can someone help me out? Thanks in advance.
>

Mail not crashing but not working

Today I noticed that I haven't received any emails in the past few days - hitting "Get Mail" does nothing other than a nice soft chime. I log on to Mobile Me - no recent mail. Then check my Ipad - nothing new.
I check "Connection Doctor" and everything is green. I repair permissions using Disk Utility - twice. I throw out the .plist file - nothing seems to work.
What else can I do? Should I reinstall Mail? I've backed my emails up so I'm not worried about losing anything.

Hmmmm, the chime & checking WebMail would seem to indicate you have none, but have you tried eMailing yourself anything?
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup

ToC in CS4 crashes but not in CS3

Similar Messages

Maybe you are looking for