TOC Problem: Leader Lines disappeared after I've changed the font
Hi,
I am having a strange problem with Pages (I use the version in iWork 08). I am currently writing on my dissertation. I have used Helvetica while typing because it reads better on the screen. However, after changing the font to Georgia (for the final printout), my TOC got all messed up.
First, I had beautiful leader lines that looked like this:
Heading one ................. [page number]
This was the default option. I did not change a thing. Then, after changing the font and the margins of the document, the leader lines disappeared and I could not get them back, even after setting them manually. Right now the entries look like this:
Heading one [page number]
...which is very ugly.
Any help is highly appreciated. I do not want to hand in the paper like this. (Also, switching the font back to Helvetica did not bring back the leader lines. This seems to be a strange bug in Pages.)
Sounds to me as if the tab that the leader lines were attached to have been lost in your changed style, or have popped off the right hand margin. Leaders go with the tab which should be holding the right hand text in place. No tab, no leader.
I have noticed a bug with tabs in Pages where if you have multiple tabs that should fit within a given space, the last one may not register and falls over to the next line.
Similar Messages
-
My ipod shuffle disappears after I click on the icon in Itunes. I reinstalled Itunes and my computer has been updated. What else can I do?
The shuffle icon in iTunes disappears, after you click on the icon in iTunes? If so, if you do not click on the shuffle icon in iTunes, does it remain there indefinitely? Are you looking at the shuffle icon in the iTunes sidebar?
-
How do I make drag sources disappear after being moved to the correct drop target in Captivate 7
How do I make drag sources disappear after being moved to the correct drop target in Captivate 7
Thank you so much. I could have searched a very long time and not found that. It is counter-intuitive to me that I would set the behavior for the drag source on the properties for the drop target.
-
How do I change the fonts on the home page? They recently shrank from 12 to very tiny..(6 pt?). I did nothing to change them, but after the event tried to change them using "preferences-Fonts"which had no effect. ATT seems to have made a change in their email. The fonts in the email are now huge (18 pt?). This could be an ATT/Yahoo problem with Mac, although Safari seems to be working o. k.
Jim, extensions are also add-ons. Add-ons include extensions, themes and plugins.
Whenever you have a problem with Firefox, whatever it is, you need to make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author. -
Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?
after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days
-
After I've changed the file name/format in Finder iPhoto can't load/relink to the referenced file anymore. For some reasons I don't like to reimport the file.
Hmm the advice has been not to use referenced libraries - you ignored and did it anyway and you find the advise not helpful
Furthermore the advice is that if you choose to use a referenced library that you assure that the path never changes - you also choose to ignore that advice and do it anyway - and you blame the peopson trying to help you
once again - you have one choice - change the file names back and put the files back in the exact same place - and again you are totally ignoring the advice and instead name calling and attacking the person giving you advice
Maybe life would be easier if you followed advice rather than ignoring it and then complaining that things no longer work
change the name back and you will be fine until the next problem you hit that is caused by choosing a referenced library
Have a nice day
LN -
I do not know how I changed the font size on my face book page I have tried everything to change the font size to 100% but have failed. Any suggestions?
Hi,
From your description, you want to know how to edit a page in SharePoint 2013.
Go to the page->click Settings->Edit page,refer to the following screenshot:
If a user want to edit a page, he at least have edit permissions.
If you have any problems, please don't hesitate to let me know.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I don't know what is going on with the White Balance (WB) and LR. I had no problem before but recently LR started to change the WB as it is importing photos. I checked the color scale for my photos and LR and both are with sRGB. Now instead of LR changing the WB it is giving me a second copy with a new WB. Your advise is very much needed and appreciated. Thank you.
Can you show us a screen capture of this 2nd copy with a new WB in your Lightroom grid? Thanks
Are these second copy photos by any chance photos that had been previously imported? -
After both (1) changing the password for my Iphone 4S and now (2) loading system 6.1.3 for it (and restoring when Itunes said I must)
- Itunes it will no longer restore all the apps I bought with the old psasword.
How to get them please?
===========================
Sorry - no - all well, they seem to be all coming back - back just after I put this question.
Mysterious to me but very satisfactory.
Profile doubtless that of an ignoramus.Ok, so I was able to find one but the one i'm most diappointed is the "free music" app i purchased and it had hundreds of songs that i didn't put on my desk top to save. So just so we're clear, I cannot get that app back again with all my songs if it wasn't in the "purchased" place?
Also,
my husband has a iphone 4 and i've been trying to connect it to our Garmin GPS through bluetooth. Now both devices recognize it but once a call is made or received, nothing goes through the GPS. I've had it working before but it was before a couple of upgrades. It is currently on ios7.2 upgrade. Is that why it won't work?
Thanks -
Hi I run the 6.0.2 patch and I stiil have the same problem, no wifi connection even if i change the wireless antenna and the security any ideas??
There are two steps to the update for an iPhone 5. First you run the patch then you update the iOS. Did you do both? And does iOS 6.0.2 show up in Settings > General > About > Version
The first thing apple will tell you to do if you bring them the phone is to reset the phone. Try that before going any further.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem. -
On some sites certain lines appear with the bottom half missing, as if obliterated. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.
I looks that the whole line doesn't fit in the container, so the bottom part is cut off. The usual cause is that a font is used that takes more vertical space, so any increase or changes from the font in what the website prescribes can cause this issue. I've seen web pages that were even affected by changing the minimum font size from none to 1 (!). If you do not have the font installed that the website specifies then Firefox will fallback to another (default) font that may have different dimensions.
-
How do I change the font style in After Effects CS6?
How do I change the font style in After Effects CS6?
AE basics: Go to Window>Character or select Workspace>Text
In the timeline, select the Text Layer or in the Comp Panel, with the text tool selected and the layer selected in the timeline, highlight the text you want to change
In the Character Panel, Change the font attributes...
Take a quick look at this short video. You will learn how to find the font panel, change the paragraph style and baseline shift:
Please, since your question tells me you are very new to After Effects start here: Basic Workflow -
I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password. Can anyone help?
Hi twinkytomes,
Welcome to the Support Communities!
The article below may be able to help you with this.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
- Judy -
the burn cds software has disappeared after loading 10.5, itunes 10.5 wont let me burn cds
Thanks for trying Toonz, but unfortunately no success yet. I updated my driver but still get an error message. The interesting thing is I have windows XP (not Windows 2000), so I unchecked a box someone else suggested that I try to check. Here are my latest diagnostics:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 5100
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: AFS2K (3.1.14.0), CDR4_XP (5.3.5.10),
UpperFilters: pwd_2k (5.3.5.10), cdralw2k (5.3.5.10), GEARAspiWDM (2.0.4.3),
Video Driver: MOBILITY RADEON 7500\MOBILITY RADEON 7500
IDE\DiskHITACHIDK23FB-60______________________00M0A0C1, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STRW/DVD_GCC-4240N_______________E112___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST RW/DVD GCC-4240N, Rev E112
Audio CD in drive.
Found 12 songs on CD, playing time 39:19 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:21:55
Track 3, start time 05:56:13
Track 4, start time 08:56:00
Track 5, start time 12:45:03
Track 6, start time 15:34:68
Track 7, start time 19:08:23
Track 8, start time 23:21:45
Track 9, start time 26:37:65
Track 10, start time 30:19:48
Track 11, start time 33:32:70
Track 12, start time 36:52:00
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 16 24.
The drive CDRW speeds are: 4 10 16.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: HL-DT-ST RW/DVD GCC-4240N on CDR media at speed 4X.
Any other ideas? -
Hi
I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
TY!!!!Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original.
Maybe you are looking for
-
How do I add a two word phrase to index
I’m trying to speed up the process of adding Latin names of plants and animals to an index using Indesign CS4. These consist of two word phrases (genus + species) which need to be put into the topic level 1 and topic level 2 boxes of the New Page Ref
-
Has anyone implemented ChaRM in a 4-tier or 5-tier landscape?
Iu2019ve setup ChaRM with a 3-tier landscape DV1-QA1-PRD and everything works as advertised. I used the transport route, DV1/120 -c- /QA1/ (clients 149/150) -QA1 -d- PRD/150. Where -c- is a consolidation route and -d- is a delivery route. Now I need
-
Unable to set ringtone for each contact
After upgrade to the 5.1.1 iOS I was not able to set individual ringtone to each of contact anymore. All my contacts are using the same default ringtone when ever anyone calls. When I go into contact and hit edit I can see the different ringtone alre
-
Someone was using my account and changed my security question's answers and changed my rescue email address. What can i do to change everything back to the way it was?
-
We used to be able to sort by multiple columns/rows at once by right clicking on the header and choosing show more options-how do we do that in the new Numbers? It doesn't appear anywhere. Do I now have to sort massive tables by each column one at