Toc problems in a 25 chapter book

my 25 chapter book toc style works pretty well until chapter 5, and stops there leaving 20 chapters out.
what can be the reason for that problem?
Thanks for any help
Samuel

The first thing that jumps into my head is that it isn't finding anything tagged with the style names you included. Check to be sure that the names in use are exactly the same in all the documents -- stylenames are case-sensitive.
Peter

Similar Messages

AGMac-TOC Problem-Keeps only one chapter...

Hello,
I started a new book in iBooks Author 2.0 and I added a 2nd chapter...
The TOC contains only the contents of the last chapter I have selected before I go to TOC page...
Why is this happening?
Thank you for your time and help...

In the popup-menu I do not see any menu item "Apply Changes"...
I See:"Cut Chapter", "Copy Chapter", "Paste", "Delete Chapter", "Duplicate Chapter", "Add Page", "Insert Page", "Rename", "Change Chapter Layout", "Reapply Layout to Chapter"... only...
Can you be more specific?
Thank you again for your time... ))))))

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Hello, I have a problem trying to open my books

Hello, I have a problem trying to open my books the error: Can not open the can (Name Book) The license key is damaged, which is the source of the problem and what can be the solution, Thanks

I have the same problem. I bought a ebook and when I try to add it to my library sometimes it reports error with the license and other times it just crashes.

TOC problems after RH5 - RH7 upgrade

Hello,
I use RoboHTML to create help projects.
After upgrading one with several subprojects from RH5 to RH7
the following problem occurs:
the TOC of the subproject is not incorporated in the main
TOC, instead the name of the subproject is shown. when clicking
this, the subproject is opened in a new tab (tested on Firefix3 and
Opera9.5), virtualy as a separate project.
The same project was previously published with RH5, with the
subprojects correctly linked.
Also, I reveive the attached java error (again not existing
with RH5) when opening the start page. if I substitute the newly
generated WebHelp.jar with the old one (generated by RH5) the error
ceases but the TOC problem persists.
Any ideas?
Thanks a lot,
Norbert

I recently tested the 9.0.1 upgrade and the hotfix for 9.0.1, but the problem still exists. However, "ColdFusion Jedi" Raymond Camden came up with a workaround. You can read about it here:
http://www.coldfusionjedi.com/index.cfm/2010/9/16/Followup-to-CFGRID-MultiRow-Post
The problem occurred when the Adobe team that released the 9.0.1 upgrade added "multi-row select" functionality to the HTML/AJAX version of CFGRID, but they failed to include the same ID-passing functionality of the previous "single-row select" implementation.
I created a more generic version of Raymond's javascript function which finds the selected row(s). This javascript must reside on every page which contains an HTML cfgrid:
<script type="text/javascript">
function getSelected(gridName,idName) {
    obj = ColdFusion.Grid.getSelectedRows(gridName);
    var selected = "";
    for(var i=0; i<obj.length; i++) {
      if(selected == "") selected = obj[i][idName];
      else selected += "," + obj[i][idName];
    document.getElementById('selectedRowIDs').value = selected;
    return true;
</script>
To force the selected row's ID (or other) field to be passed to to the subsequent page, you must include the following in your CFFORM tag (the field name MUST BE in ALL CAPS):
     onSubmit="return getSelected('gridName','FIELDNAME')"
Example: <cfform name="itemGridForm" action="editItems.cfm" method="post" onSubmit="return getSelected('itemGrid','ITEMID')"...>
You must also include the following hidden field in your cfform which contains the cfgrid:
    
     <cfinput type="hidden" name="selectedRowIDs" id="selectedRowIDs">
On the called page, FORM.selectedRowIDs will contain a list of the selected rows' ID fields (or whichever field you choose when calling the Javascript function).
Message was edited by: el-cott

Outlook 2011 problem syncing contacts with address book

I am aware that Lion has broken the sync ability of Outlook 2011 with Address Book. Hopefullly this will be fixed at some point.
So my problem is that I have decided to use a workaround to get my Address Book contents into Outlook 2011. I am not concerned with further syncing at this point. I just want to get my addresses into Outlook and hope a better fix is offered at some point.
About the only way I could figure out how to do this was to export my Address Book as vCard. I then imported the vCard file into Gmail and then exported that as a CSV file. It contained 550 addresses. I opened it in Excel and it contained 550 rows. Great so far.
I then Imported into Outlook 2011 and chose import a text file. When the mapping window opened, it showed over 890 files instead of 550 and the fields were not mapped correctly. I could not complete the import because it was so screwed up.
So I'm back to square one and very frustrated. There must be others who have the same issue and maybe have figured out a way to do this. Please help.

Hi Michael Erb1,
As per your issue, i.e Outlook 2011 problem syncing contacts with address book, activation of this issue is usually can solve out through various ways. One of the simplest way, i.e by restarting Outlook 2011 application and need to chase few necessary steps which are clearly mentioned below blog link, from where you can utilize this method and can get a proper solution for Sync Outlook 2011 for Mac with Mac Address Book.
Source link: http://www.blogs.olmtopst.com/how-to-sync-outlook-2011-for-mac-with-mac-address- book.html
Hope this information will assist you and makes you competent to Sync Outlook 2011 for Mac with Mac Address Book easily.

Problem to see a new book type in project

Dear friends;
I have a problem to see a new book in the module project.
The steps for create the book are the next:
1. - I create the book in the Fixed Asset module in the Book Controls option.
2. - Associate this book to a category in the Fixed Asset module option in the Asset Categories
3. - In the Project module to want to assign it to a project I was not shown in book value list
I missing some step?
Thank you in advance for your support
Best Regards
Tom

Dear Tom,
Please check the Profile options, Security Assiginments, Asset Book dates and Project dates..........
Regards
Raghvender

Problem downloading "The Firm: Chapter Five" error -50

I am having problems downloading "The Firm" "Chapter Five". It gets to about 570 MB and then throw an error of -50. Any suggestions?

iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - includes list of iTunes error codes

Hello guys!! I have a problem! My old mac book today when I am switch one appears and after seconds white screen continue with one interrogation mark?? Someone Knows whats happen?? How can I solve this trobleshooting?? Sorry, my english is poor!!

Hello guys!! I have a problem with my old mac book. Today when I am switch on one white screen appears and after seconds this white screen continue with one interrogation mark!! Someone knows whats happen?? It does not starts !! I have a feel of work inside and I am afraid!! someone may help me??

your English was quite good enough to tell us that you saw this
Niel has advised you well.
If you have a more complicated problem, you can write in your language. Most all of us can translate with Google very easily... see
Español
Si usted tiene un problema más complicado, se puede escribir en su idioma. La mayoría de todos nosotros puede traducir con Google muy fácilmente ... ver
Português
Se você tem um problema mais complicado, você pode escrever no seu idioma. A maioria de todos nós pode traduzir com Google com muita facilidade ... ver
buenos tardes
ÇÇÇ

InD CS4 TOC problem

I have a TOC set up for a multi-file book. The TOC is generating correctly and autoformatting correctly EXCEPT... sometimes if more than one paragraph of the same style is on a single page, only the first one is shown in the TOC. For example, if I have two paragraphs using Header 2 on page 35, only the first instance shows up in the TOC. But, if I add enough blank line breaks to the page to roll the second Header 2 onto page 36, or set its pagination to 'top of column', it will then show up in the TOC.
The truly mind-boggling thing about this is that it's only occurring on some pages. In others it's no problem to have multiple instances of the same paragraph on a single page in the same chapter -- both are picked up correctly in the TOC.
I have tried formatting the headers as body text, then re-applying Header 2. Doesn't solve it.
Ideas?

The only thing I can think of is possibly Remove minor corruption by exporting
Are you fully patched to at least 6.0.5?

How can I create a general TOC using the titles of my books TOCS

I have a document that includes the information of 6 different books, each one has its own TOC at the beginning of the chapter. The chapter title is only written as the title in the TOC. In the first book I want to create a general index that shows the 6 chapter names. I have tried to create a TOC, but it just appears blank. I think that's because I haven't written the titles, they were created in each chapter TOC by InDesign. I really think there must be a way to create this general TOC but I just can't figure it out. Can you help me, please?

Create every TOC with a title paragraph style which is not the same as the title styles in the text.
Create a new document, assamble all documents in a book fille indb, create a new TOC which reads out the paragraph style of your TOC’s titles, include all book files in the definition of this TOC only.

PDF bookmarks not expanding for 2 chapters in my 9-chapter book. What should I look for?

In my unstructured book, page, table and figure numbering is all correct. All 89 figures number correctly. I can't get the PDF bookmarks for chapters 2 and 8 correct. Each of the chapters have a bookmark, but no expanded bookmarks. They should have several. My TOC may have a clue as to what is wrong: only the links for chapter 1 work. All of the other chapters in the TOC show a link is present, but nothing happens with a click.
I've used the same formatting throughout the book; e.g., paragraph tags, master pages, etc. I only have 2 master pages – first and right. First is used for the first page of each chapter. When I save to PDF these 2 chapters separately, the chapter title ends up at the end of the bookmark list instead of the top. I know something is off, but I don't know what to look for. Tags that I don't see? Very frustrating.
I'm relatively new to FM and don't understand the tags in the reference pages. I haven't intentionally created any formatting tags in the reference pages. I only use them for special characters and repeated graphics.
Any guidance would be greatly appreciated. What I want for Christmas – a decent user manual for FM! I'd take a class, but I'm retiring in April.

The title bookmarks for the chapters won't be out of order in the book, but you indicated that they are (at the end of the sub-levels) for chapters 2 and 8 when done separately. If the text frames holding these titles were created after the main flow text frames, that would explain why things are things are misbehaving.
To specify the expanded bookmark level, you need to explicitly type in the level value that you want [ignore the drop down list and "Default" setting].
From the Book file, regenerate the TOC before you test the links. If you get a "File not found" after this, in the TOC, then something is really messed up i nhe TOC file. I would rename it and create a new one for the book. You can then import your formatting from the older, renamed version.

ToC problem with hanging side head paragraphs

I've created a template in CS4 ID that uses hanging side heads that look like those shown here:
http://tinyurl.com/bdrnxq
The hanging side heads were created using instructions included in the linked example.
Everything is working except the ToC. When I generate one, the hanging side heads are grouped together at the top of the items listed on a page, no matter where they really are located on that page. For example, if the following sections were on page 5 in the book:
1st level section 1......pg 5
1st level section 2......pg 5
1st level section 3......pg 5
2nd level hanging side head section 3.1.....pg 5
1st level section 4......pg 5
Are showing up in the TOC as:
2nd level hanging side head section 3.1......pg 5
1st level section 1......pg 5
1st level section 2......pg 5
1st level section 3......pg 5
1st level section 4......pg 5
Is there a setting that will fix this problem, or a workaround? I'm bummed that this isn't working properly in InDesign.

Hello Jeurgen
I don't think that it is possible to do what you want i.e. independently control where Pages breaks the heading in the TOC. However, you will notice that you get slightly nearer what you want if you align the text of the TOC to the left instead of justifying it.
Annoying I know...

Epub navigational TOC problem

Indesign CC 2014; OS 10.9.4
I am having trouble getting a hidden layer, with style applied in the TOC dialogue box, to export to epub navigational TOC. When it is showing, it exports perfectly, but not when the layer is hidden.

Thanks for responding! I am attempting to create a navigational TOC, with two levels, that reads differently than the actual titles of the book chapters, i.e., in most cases, adding "Chapter 1:" to the beginning of the title. As there is also front matter, section dividers, and a glossary, there are different levels that I want in the TOC, and so I have created TOC styles that define these levels, and what I want each navigational TOC entry to say. I've applied TOC-specific styles to these on a hidden layer of each chapter, as I don't want the hidden layer to appear on the actual epub pages...just in the navigational TOC. When the layer is hidden, it doesn't appear at all in the navigational TOC, and instead, a file title navigational TOC shows up, and has unwanted dashes everywhere there is supposed to be a space. When the hidden layer is showing, the exported epub has a perfectly constructed, exactly the way I want it, navigational TOC, but it appears on the chapter page, and I don't want it there. Yes, I have selected "multilayered TOC" instead of file title when constructing the TOC styles. Not sure if this makes any sense, but I appreciate your response and any thoughts you might have.
Mara

Export epub note problem and freeze with big books

(Excuses for my English... I'm not native English speakir)
When I'm mailing a note that i made in a epub book on my iPad, I only get the note and the chapter but not a quote of the text what note is about. (not very useful)
When I export the same note from ibook on mac os X mavericks the text what the note is about is quoted when exporting/mailing.
What am I doing wrong on my iOS device??
Also when iBooks is very slow with rendering the index of example: the bible (>600 chapters). This book has so many chapters when opening the index it seems to freeze and when loaded (after a min or something) you can scroll down but when you are on 3/4 of the index it start stutter.
(it also should make drop-down menu's but that's a total other thing). It makes it un-usable :-( (are people seeing the same problem with big books, (with a lot of chapters)?)
I contacted the auteur of the book but they say, it is iBooks. We can't help you... Apple do not support epub correctly.
I'm using the new version of ibooks 3.2 on iOS 7 ipad Air.
Example I was talking about (Dutch) : https://itunes.apple.com/nl/book/de-nieuwe-bijbelvertaling/id424830497?mt=11

I can confirm iBooks v 3.2 is extremely slow when opening the index of books with a large number of chapters. (Tested with O'Reilly's "Learning Python Fifth Edition" by Mark Lutz in epub format.) There seems to be a sharp cutoff in the length of the index above which iBooks/iPad freezes for a long time (About a minute in my case.) Hitting the "Resume" button once the index has been displayed also freezes for a long period.

Toc problems in a 25 chapter book

Similar Messages

Maybe you are looking for