TOC Structure Problem

Hi,
I am using RH X5 and creating HTML Help.
I have a Master project and a few Child projects. In TOC, if
i have a Book and two Child projects under it. After generating,
the Master project, the second Child project gets merged with the
first Child project.
For eg:
Before generating the Master project, if i have :
Book1
CPrj1
Book1
Book2
CPrj2
Book1
After generating the Master project, it looks like the
following:
Book1
CPrj1
Book1
CPrj2
Book2
Pls suggest...

Hi ezee
I think you are seeing a long standing issue with compiled
help and merges. It used to be that a bug existed with merged TOC
and compiled .CHM. RoboHelp HTML used to correctly handle the merge
by inserting extra code that overcame the issue. Then at some point
it broke again. Now I'm not sure if RoboHelp stopped implementing
the fix or if Microsoft finally corrected the issue on their side
and the RoboHelp "fix" made it break. I suspect it's the latter,
because I've seen many reports that if you move RoboHelp out of the
picture and compile using the basic Microsoft HTML Help Workshop
(HHW), the TOC books nest up just as you would expect. So I'd give
that a try. Compile using HHW and see if the problems melt away.
Cheers... Rick

Similar Messages

IMac (March 2009) - Invalid Node Structure problem

Hi All
I was using my iMac as normal yesterday, when suddenly the system ground to a halt (something I never seen since using OS X). As I had work to do, after about an hour, I restarted, expecting it to be an app misbehaving or something straight forward, but on restart the same thing happened almost straight away.
So, I restarted again, only for the iMac to get stuck on the blue screen which follows the grey 'cog' screen. After looking through these discussions, and some other Mac forums, I booted from the installer disk, tried to run Disk Utility, which found issues and couldn't repair the disk.
I then tried Safe-User mode and fsck, which reported the aforementioned Invalid Node Structure problem. After checking a few more forums, I thought I would try to Erase the disk and reinstall Mac OS. I restored from my Time Machine backup, and finally got it to start, but the system moved at a snail's pace, and wouldn't open any apps or files.
I've tried again with fsck, and also fsck_hfs -r /dev/disk0s2 but all I get is the same error message:
disk0s2: I/O error.
Invalid Node Structure
(4, 38403)
** Volume check failed.
/dev/rdisk0s2 (hfs) EXITED WITH SIGNAL 8
So, does anyone know if there is anything I can do to save the iMac? Or does it need a new HD? It is my primary work computer, so I really need to get it back, and after buying it in the UK, am now in France for 6 weeks, so it's difficult for me to take it to an Apple specialist.
Any help would be greatly appreciated, thanks in advance,
Daniel

As the last user stated, Disk Warrior maybe able to correct it, however if you search the net, you will see there are more than one user with this problem. I had the same problem, however, my machine is out of warranty, It started like you are saying, I RAN disk warrior which corrected the problem long enough to boot the system. In a matter of 10 minutes or so, the system started pausing (apps hung, but in a matter of seconds recovered). I was checking the disk with fsck_hfs and fsck while booted from a USB drive with a maintenance install of 10.5.6. After running fsck the 5th time with different options suggested from the internet, I rebooted with my disk warrior DVD only to find the drive NOT mounted, Drive utility see's it (even can attempt to run disk repair, but it locks up the system when trying this). Disk Warrior doesn't even see the disk to run a directory repair, although in the "check s.m.a.r.t status it sees it as a sata device, and SAYS ITS NORMAL).
Since my iMac was out of warranty, I followed the online instructions to replace the hard drive (not too difficult) and everything is fine now.
The old drive still wont mount, but another utility I bought (data rescue II) has been able to quick scan it and access all the data, even though it wont clear a fsck fsck_hfs or disk warrior, anyways, get it back while you can, IT IS THE hard drive itself, and lots of other iMac users online with the same issue (can you say WHY is my iMac SOOO HOT on the apple in the back (right where the drive is and not sufficient cooling in my opinion, but hey, some people might want to lay their computers face down and fry eggs on the it or something... ))
-SD

RH8 duplicates TOC structure of FM book

Hello all, when I import/link an FM book and select to generate a TOC in the import properties, then RoboHelp duplicates the entire TOC structure! That means, if there are 6 chapters in the FM TOC then there are 12 in the generated TOC in RH. Manually changing the TOC is no solution because after every time I update the import, the structure is duplicated again.
BTW, I also noticed that it is not possible to select the second option in the import properties, to add the TOC at the end of an existing TOC. This option is always greyed out. The the help of Robohelp does not explain either why it is not available.

Hi all
For what it's worth, Leon's suggestion is what I too would recommend. When I facilitate a RoboHelp class and am discussing the "Book with link" feature, I typically will suggest that this approach is used.
@Leon - I think this changed with a recent forum upgrade. Annoying, isn't it?
Standard definiton of any upgrade: Uninstall old bugs. Install new ones.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

BAPIUSNAME Structure Problem on R/3 4.7, WAS 6.20

Hello guys,
As a part of my bachelor thesis I am consuming WS-enabled BAPIs and have encountered a problem on WAS 6.20 that has not appeared on any of the following versions of WAS:
When I try to retrieve the WSDL for BAPI_USER_GETLIST, I receive a time out error, which has not happened when invoking any other WS-enabled BAPI on the same system. And what I found, was that USERLIST table parameter of type BAPIUSNAME prevented the export of the BAPI as WS. The structure BAPIUSNAME is activated in the Dictionary.
That is why I created a structure ZBAPIUSNAME with exactly the same attributes, activated it and used it instead of BAPIUSNAME. Alas, the result was the same.
I would be very thankful, if somebody could give me a hint what is going wrong there.
Thanks.
Best wishes,
Petromil Petkov

Hi Achim,
Thanks for your reply. When I said ITS available with EP, I actually meant WAS 6.40 only. I think my words miss guided you. I do not have stand alone ITS installed in my landscape. Let me rephrase my question.
I have,
1) R/3 4.7 with WAS 6.20
2) EP 6 SP 15 with WAS 6.40(which has abap integrated ITS)
in my landscape.
I need to provide a R/3 transaction on EP using transaction iView. In order for transaction iView to work, is it possible to use the ITS integrated with WAS 6.40 to connect with R/3?
OR
I need to have a separate ITS installation and connection will be R/3 4.7 (WAS 6.20) -> ITS (stand alone) - WAS 6.40(integrated ITS) EP.
Hope I made my question clear.
Let me your response.

Query structure problem

Hi,
I need to create a query with a column structure described bellow:
Key figure .................|.. 0Quantity .....|.. 0Amount
Posting period ...........|.. # .................|.. Var1 (5,6, 7, ... 12)
The problem is that the column 0quantity should show only a figure for the entire year and the 0amount should show figures only for periods while the number of periods shown for 0amount is a variable range. 0amount should not show a figure for entire year (for #).
Creating two different queries does not seem like a solution as an expandable account hierarchy should be shown on the rows. The hierarchy should show the same view for both 0quantity and 0amount when a node is opened by user.
Any suggestions how to solve this?
Aino
Edited by: Aino Tuominen on Apr 2, 2008 11:36 AM
Edited by: Aino Tuominen on Apr 2, 2008 11:37 AM
Edited by: Aino Tuominen on Apr 2, 2008 11:46 AM
Edited by: Aino Tuominen on Apr 2, 2008 11:47 AM
Edited by: Aino Tuominen on Apr 2, 2008 11:48 AM
Edited by: Aino Tuominen on Apr 2, 2008 11:49 AM
Edited by: Aino Tuominen on Apr 2, 2008 11:52 AM

To see the periods for 0amount also 0quantity will have the periods shown as they are both in columns. This is not what I want. I only want to have period "#" shown for for 0quantity and periods "1-12" for 0amount. Even if I have restricted these they will be shown as both 0amount and 0quantity are in the same structure for columns.

Query structure problem (i think)

hi am trying to get selected strings out of a jlist
and concanate them into a query i dont have any
problems getting the strings out of the list and
into the query ,i think that my problem lies within
the structure of my query.i am trying to create a new
user for a database and set their privleges when i run
the program and create a new user every things fine as
long as the only value that i select from the
privilegs list is "ALL PRIVILEGES" or "CREATE" any ther values
and i get a connection failure to the MySQL server. could any one tell
me where i am going wrong or knows the structure of another query
that can do the same job???
cheers gerry
final String privilegetype[] = {"SELECT","INSERT","UPDATE","DELETE","CREATE"
,"DROP","ALL PRIVILEGES"};
String databasename[] = {"garage","music store",};
//the query where mk=the selected string from privilegetype,
mkk=the selected string from databasename,
name=new username,new String(pass)=the new user password
s.executeUpdate ("GRANT "+mk+" ON "+mkk+" TO "+name+" @"+host+"
IDENTIFIED BY '"+new String(pass)+"' WITH GRANT OPTION");

Output the actual query string and see if you can run it outside Java. If you cannot, then it's a database/SQL problem, not a Java problem. If you can, come back and post more details.

SAP ABAP Proxy - recursive data structure problem

Hi,
For our customer we try to bind SAP with GW Calendar using GW Web Services. We tried to generate ABAP Proxy from groupwise.wsdl file but there are problems: GW uses recursive data structures what ABAP Proxy can not use. Is there any simple solution to this problem?
Best regards
Pawel

At least I don't have a clue about ABAP Proxy.
You are pretty much on your own unless someone
else has tried it.
Preston
>>> On Tuesday, August 03, 2010 at 8:26 AM,
pawelnowicki<[email protected]> wrote:
> Hi,
>
> For our customer we try to bind SAP with GW Calendar using GW Web
> Services. We tried to generate ABAP Proxy from groupwise.wsdl file but
> there are problems: GW uses recursive data structures what ABAP Proxy
> can not use. Is there any simple solution to this problem?
>
> Best regards
> Pawel

IMac btree or volume structure problem?

When I turn on my 8 year old iMac I get a gray screen with the Apple logo and a narrow horizontal bar just above the logo. I tried doing a Safe Boot, but after a few minutes it restarts itself. I started it up from various CDs that came with it, and these are the results:
Apple Hardware Test CD shows no hardware problems.
OS 9.1 CD got me to the System 9 desktop. I ran Disk First Aid from the CD. The last item it checked was catalog BTree. Right after that it said unable to read from disk. I was able to copy items from the System 9 desktop to my laptop. But when I opened the Users folder on the HD to copy items from the OS X side, all I found were .localized documents. I was hoping to get to my pictures.
OS 10.0.3 CD Disk Utility - First Aid said "Reserved fields in the catalog record have incorrect data. Keys out of order." When I click Repair, it does not fix the problem.
I then downloaded Tech Tool Deluxe for Power PC and started up from that CD. It says Volume Structure failed. If I choose to rebuild, it will make some drastic changes to the original directory data, such as total files going from 193,111 to 8,595 and volume content size going from 18.6 GB to 12.1 GB. I was afraid I might lose something important, so I did not do the rebuild.
I feel like I might be in over my head. Should I take it to the Apple Store and let them deal with it? Any ideas about how to get to my pictures so I can copy them onto my laptop?
Thanks!
April

+Keys out of order+, in my experience and others here, can only be repaired with the following utility and only if it's not too far gone. It repaired that issue for me.
If Disk Utility can't fix it, you'll need a more robust utility for the repair. I would recommend DiskWarrior. It is the best at directory repairs. It rebuilds then actually replaces your old directory. I feel every Mac owner should have a copy. Make sure you get the disk so you can boot up on it to run repairs. You can also install it on another drive and run it from there to repair this one. DW works faster that way.
TechTool is just not a robust enough repair utility to fix your very serious directory corruption.
I use DW once a month to try and catch errors in my system from getting too far out of hand.
If you have a good backup, hopefully a clone of your system before you had issues, an Erase and Install will also rid you of this issue. But, beware! You will lose everything on the drive with this procedure. Let us know if you need help with that!
Cheers! DALE
p.s. Here's a rewiew of DiskWarrior 4.

Correction Invoice and "invalid document structure" problem

Hello!
Can anybody explain what properties are obligatory for correction invoices? I'm trying to add() one and it always say -5002: invalid document structure.
In the CSI1 table I see linenum has to be unique, every baseline is twice. Do I make any stupid mistake? If so - where? What's wrong? Something is ommitted?...
                                                                                Thanks in advance!
                                                                                This is a snippet (two loops are unnecessary, I was looking for other ways). I'm trying just to zero the invoice. Should quantity in was lines be negative? It does not matter - everytime -5002...
     @Test
     public void testSAPCorrectionInvoice() throws SBOCOMException {
          ICompany company = sapConnector.getCompany();
          // Integer srcDocEntry = 6457;
          Integer srcDocEntry = 7084;// this one has no batches
          logger.debug("Creating correction to: " + srcDocEntry);
          // source doc
          IDocuments srcDoc = SBOCOMUtil.getDocuments(company,
                    SBOCOMConstants.BoObjectTypes_Document_oInvoices, srcDocEntry);
          logger.debug("srcDoc: " + srcDoc.getDocObjectCode() + ", "
                    + srcDoc.getDocNum());
          IDocuments sapDoc = SBOCOMUtil.newDocuments(company,
                    SBOCOMConstants.BoObjectTypes_Document_oCorrectionInvoice);
          // header:
          sapDoc.setHandWritten(SBOCOMConstants.BoYesNoEnum_tNO);
          sapDoc.setSeries(317);
          sapDoc.setDocType(SBOCOMConstants.BoDocumentTypes_dDocument_Items);
          sapDoc.setCardCode(srcDoc.getCardCode());
          sapDoc.setCardName(srcDoc.getCardName());
          sapDoc.setAddress(srcDoc.getAddress());
          String federalTaxID = srcDoc.getFederalTaxID();
          if (federalTaxID.length() > 0)
               sapDoc.setFederalTaxID(federalTaxID);
          sapDoc.setDocDate(new Date());
          sapDoc.setDocDueDate(new Date());
          sapDoc.setSalesPersonCode(srcDoc.getSalesPersonCode());
          sapDoc.setDocCurrency(srcDoc.getDocCurrency());
          sapDoc.setPaymentGroupCode(srcDoc.getPaymentGroupCode());
          sapDoc.setTransportationCode(srcDoc.getTransportationCode());
          sapDoc.setContactPersonCode(srcDoc.getContactPersonCode());
          // sapDoc.setDiscountPercent(0.0);
          sapDoc.setComments("zwrot towaru");
          // sapDoc.setDocTotal(0.0);
          sapDoc.setVatDate(srcDoc.getVatDate());
          // items
          IDocument_Lines lines = sapDoc.getLines();
          int lineno = 0;
          IDocument_Lines srcLines = srcDoc.getLines();
          for (int i = 0; i < srcLines.getCount(); i++) {
               srcLines.setCurrentLine(i);
               logger.debug("line " + i + ", item: " + srcLines.getItemCode());
               if (lineno > 0)
                    lines.add();
               lines.setCurrentLine(lineno++);
               lines.setItemCode(srcLines.getItemCode());
               lines.setItemDescription(srcLines.getItemDescription());
               lines.setWarehouseCode(srcLines.getWarehouseCode());
               lines.setPrice(srcLines.getPrice());
               lines.setDiscountPercent(srcLines.getDiscountPercent());
               lines.setTaxCode(srcLines.getTaxCode());
               lines.setBaseEntry(srcDocEntry);
               lines.setBaseType(srcDoc.getDocObjectCode());
               lines.setBaseLine(i);
               lines.setVatGroup(srcLines.getVatGroup());
               lines
                         .setCorrectionInvoiceItem(SBOCOMConstants.BoCorInvItemStatus_ciis_Was);
               double quantity_was = srcLines.getQuantity();
               lines.setQuantity(quantity_was);
          for (int i = 0; i < srcLines.getCount(); i++) {
               srcLines.setCurrentLine(i);
               logger.debug("line " + i + ", item: " + srcLines.getItemCode());
               if (lineno > 0)
                    lines.add();
               lines.setCurrentLine(lineno++);
               double quantity_diff = 0;
               lines.setItemCode(srcLines.getItemCode());
               lines.setWarehouseCode(srcLines.getWarehouseCode());
               lines.setPrice(srcLines.getPrice());
               lines.setDiscountPercent(srcLines.getDiscountPercent());
               lines.setTaxCode(srcLines.getTaxCode());
               lines.setBaseEntry(srcDocEntry);
               lines.setBaseType(srcDoc.getDocObjectCode());
               lines.setBaseLine(i);
               lines.setVatGroup(srcLines.getVatGroup());
               lines
                         .setCorrectionInvoiceItem(SBOCOMConstants.BoCorInvItemStatus_ciis_ShouldBe);
               double quantity_was = srcLines.getQuantity();
               double quantity_is = 0; //quantity_was - quantity_diff;
               lines.setQuantity(quantity_is);
          int result = sapDoc.add();
          String info = company.getLastErrorDescription();
          logger.debug("res = " + result + ", info: " + info);
          if (result != 0)
               throw new EBladKorektyNrPartii(
                         "Cannot create document: " + info);
Edited by: WodzGalopujacySkleroz on Jul 4, 2011 5:03 PM

Hello,
Maybe it's an old thread, and you might have the solution or workaround for this. Nonetheless i try to answer, it might be useful for those trying to find a solution for the same problem.
The two loops are necessary indeed. DI API expects only this structure: Start with all the "ShouldBe" lines, and follow them with all the "Was" lines. So your code is almost good, but you should have swap the two loops with each other.

TOC Book Problem - RoboHelp 8 - WebHelp Pro

Hello, I'm having a problem in a generated build of help to RoboServer 8. TOC books are linking to the previous page of the toc book above that particular book and this rings true throughout the TOC. I didn't add any links and just wanted to books to be just that books and when you click the book the subtopics within that book should display. Anyone have this problem and what can I do? I see that I can link the book to a particular page, but don't really want that. Any suggestions to correct this problem quickly. We just had a release of our product over the weekend and this is causing quite a stir. Thanks, Lana

I have come acoss issues being reported in adobe forums that webhelp output cannot be viewed in IE 10. Fixes are provided for Robohelp 10 @http://forums.adobe.com/community/robohelp/robohelp_webhelp?view=discussions where we are given a link with the fixes @.http://helpx.adobe.com/robohelp/kb/help-visible-using-win-8-ie.html but no fixes are available for robohelp 8. Please provide a similar fix for robohelp 8
Request the adobe development team to get back ASAP as we do not have the timeframe to upgrade to robohelp 10.

Build JSP-structure problem in JspC

Hi,
I am trying to deploy my project and I need to compile JSPs and create WEB-INF directory and web.xml file.
My build environment:
Win 2000
Java 1.4.1
Tomcat 4.0.3
My problem is as follows:
I use an ANT script :
<java classname="org.apache.jasper.JspC" classpath="${jsp.classpath}" fork="yes" failonerror="yes">
<jvmarg value="-Dcatalina.home=${catalina.home}"/>
<arg line="-d ${jsp.path.precompile.src} -uriroot ${jsp.path.webapp} -webxml ${jsp.path.precompile}\web.xml -webapp ${jsp.path.webapp}"/>
</java>
I have an an compile this JSP structure:
-main_folder
- folder_1
- folder_2
- folder_2_1
- folder_3
- folder_3_1
- folder_3_1_1
but every time I start the script, the JSPs are compiled to JAVA in one default package. But I have in some subfolders the same JSPa like in the other folders ("index.jsp, error_page.jsp") and after compiling to JAVA this JSP are lost, because are overwritten from the other ...
In the old Tomcat 3.2 was OK!
I don't know how to tell to the JspC to use the folder structure as a package definition for the JAVA files.
Please help me !!!

Tis a defect in the way jasper/ant handles subdirectories in the packages that needs to be resolved. If you have your jsp files in a flat directory, you're fine. If you don't, you'll need this bug resolved: http://nagoya.apache.org/bugzilla/show_bug.cgi?id=4750
Please feel free to vote for it. :)
A workaround is to create a separate ant <jspc> task for each directory and subdirectory.

Event structure problem

HI!
I am a Labview Newbie and i have some problems with my event structure in the program "Biegelinie"! I get always failure from the event-structure in the failure-list!
Could somebody help me???
best regards,
Peter
Labview 7.1 on Windows 2000
Attachments:
program.zip ‏134 KB

For a less complicated system, you can achieve nearly the same
functionality without using an event structure. Simply poll the
state of the booleans you require and feed them into case
structures. By placing these case structures and the polling into
a loop with a "wait until ms multiple" set to around 50 or 100ms, the
responsiveness of the code should be high enough without bogging the
processor down with the polling.
If you want have a look at the example VI I've attached.
Hope this helps
Shane.
PS Are you sure the document linked below is relevant for you? It
states that the event handler isn't in the base 6.1 version of LabVIEW,
but your sig says you're using 7.1........
Message Edited by shoneill on 07-25-2005 11:30 AM
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)
Attachments:
Polling boolean.vi ‏23 KB

CS5.5 ePUB: TOC Marker problems

Hi all
Got a problem with some ePUBs I'm exporting out of CS5.5 (7.5.3). I use the TOC Style feature to generate the navigational menu, which it does, but I had some issues with jumping straight to articles in iBooks. Also I was getting some validation errors that caused me to look at the toc.ncx file - eg, "'toc_marker-4': fragment identifier is not defined in 'OEBPS/blahblah_epub.html'"
Turns out that although ID puts all the correct "toc_marker" code into the toc.ncx file it doesn't always put the corresponding code into the actual html files themselves. For example, in the toc.ncx file the code relating to my second file is;
<content src="02_Editorial_epub.html#toc_marker-1"/>
but in the "02_Editorial_epub.html" file there's no "toc_marker-1" defined anywhere. If I add it in next to the para style that is used for the TOC (and do the same for all the other articles - only 2 out of 18 files were output correctly) then it works fine in iBooks and the validation errors disappear. Example of my fixed code;
<p id="toc_marker-1" class="A-head-article-title">Editorial</p>
In case it is relevant, my job is made out of a collection of separate chapters in an ID book - I'm not getting ID to split them up. Also, my first document is just an image of the cover of this title so does not contain the paragraph style I ask ID to include on the TOC, so it does not appear in the TOC (which I'm happy about).
Does anyone know of any workarounds or is this just another thing we need to fix manually once the ePUB is output? Haven't tested this in the CS6 demo yet but we won't be getting CS6 in the near future so that would not be a great help.
thanks,
Iain

Thanks amygfx. Seems like a logical idea. I tried adding in a TOC, even left it in when I made the ePUB, but it didn't make any difference I'm afraid.
Any other ideas?
Just to check I'm doing it right, here's my TOC style;
It's in teh first document in teh book (which is selected as the source) and here's the options I choose when exporting the ePUB;
Using these settings makes a navigation menu okay but just not correctly!

Budget structure problem of internal companies ..

Hi experts,
I am having problem for creating and using the structure below ,as I wanted. I am trying to find a solution which I could not get to so far.
Here is my case ;
I have 3 companies.They make budget planning in the same platform since they are internal companies.
Each company has its own sales organization ,cost centers , sales products. And the structure of these 3 companies basicly
defined as below.
entity dimesion:
ABC_Company_Grup
Company-A
     sales-organization-A
               Company-B (customer)
               Company-C (customer)
     Cost-center-organization-A
               Cost-center-1
               Cost-center-2
Company-B
     sales-organization-B
               Customer-1
               Customer-2
     Cost-center-organization-B
               Cost-center-3
               Cost-center-4
Company-C
sales-organization-C
               Customer-3
               Customer-4
     Cost-center-organization-C
               Cost-center-5
               Cost-center-6
account dimension:
Product-1 (COMPANY-A uses only)
Product-2 (COMPANY-A uses only)
Product-3 (COMPANY-B and COMPANY-C uses only)
Product-4 (COMPANY-B and COMPANY-C uses only)
1.I am having difficulty to create the structure above since it is not allowed to repeat member name.
2.I have to create cost center , customer and product members related to the companies so I can show them in data form ,kind of filtered.
anyone who had this kind of case .?
any advice please.. please.. please..
regards,

The challenge you're facing has a couple of names . . . some people call this a "cross validation rule", and others call it "valid data combinations". The idea is that you want to filter access to certain members based upon other members selected. This would get you away from having to maintain separate hierarchies in other dimensions for each company.
The bad news is that there is no support for valid data combination constraints in Hyperion Planning currently. The good news is that it was mentioned in the road map for future product enhancements at the Kaleidoscope conference (no specifics on timelines or specific versions though . . . . ).
Let's use product as an example here. With current functionality, you could:
1) Create a common hierarchy for product, used by all companies.
2) Create different ID's with specific access to each company.
3) Restrict access to products using security.
4) Create forms that "suppress no access", so invalid products don't show up.
They key is that each ID has access to only one company. Use a similar methodology to address overlaps in other dimensions. It's not 100% clean, but should get you close until true "valid member combinations" are supported by Planning.
Hope this makes sense.
- Jake

File structure problem

I've taken over a site created by another. The file structure
has been corrupted to the point where there are multiple index
files in different folders, and when I update the index file I
think is the right one, the changes are not reflected on the site.
I'd like to clean it up and fix this problem. I need some guidance
as to exactly what files and folders should be in the root folder,
or some other way to remove all the unnecessary files. Can anyone
provide advice?

Why dont you look at a link for the index page and see where
it points. For
example, if you have 5 folders that all contain an index
file, and the
folders are named folder1, folder2 and so on, the link is
going to point you
to the correct index file and folder....no? If there is no
"folder1/"
infront of the index to identify which folder, then it should
be in the root
folder.
"steelydave" <[email protected]> wrote in
message
news:go3q1e$7is$[email protected]..
> >Have the remote files been corrupted? If not you
could define a new site,
> >get all the files from the remote server , putting
them into a separate
> >folder, then delete the other folder.
>
> Corrupted was the wrong word. The files are alright,
it's just the site
> file
> structure that's messed up. The site can be accessed
with a browser, but
> due to
> the plethora of index files, I can't find the one that's
actually in use.
> How
> can I clean up the file structure?
>

TOC Structure Problem

Similar Messages

Maybe you are looking for