TOC will not show in landscape view

I'm not sure what I did, but I can not get the TOC to show up in the landscape view. It shows fine in portrait. All I have is this box with a blue outline and no text. Any ideas? I've sent everything else to the back and even went to the length of deleting everything, but I can't get it to show

I think I figured it out. I was un-aware that in landscape the TOC only shows sections, not paragraph styles like in portrait. Since I didn't have any sections in my chapter it didn't show anything. Super frustrating to say the least!!

Similar Messages

My iPhone 4s will not switch to landscape view when streaming a video on Facebook. It works on YouTube and safari, just not Facebook. Help?

My iPhone 4s will not switch to landscape view when streaming a video on Facebook. It works on YouTube and safari, just not Facebook. Help?

Well I deleted the Facebook app and reinstalled the latest version to try to correct the issue and it still didnt work. I had changed a bunch of settings earlier to try and fix it and it worked for the video to be landscape but as soon as I closed out of the app and re-opened it then it quit working.

Ever since I downloaded the ICloud I am unable to use my camera, it will turn on but the screen will not show the camera view, anyone else have this problem or what I can do to fix?

Ever since I downloaded/installed the ICloud IOS5 I can not use the camera icon on my Ipod. I can click on the icon, the screen will lighten just a little but it is not letting me see what is in the camera view. Any one else have this problem or know how I can fix it?

Make an appointment at the genius bar are your nearest Apple store. At this point there is nothing you can do without a computer, so if you don't have one and don't know anyone who has one that you can use the Apple store is a good fallback.

MS Word 2010 will not display in Layout view

In a nutshell, Word appears to be not so much stuck in "Draft" view but will not show Print Layout view at all. I am writing a manual which includes many embedded images, charts, and the like, so all of the editing has been done thus far in Layout
View. At this point my project is effectively paralyzed; perhaps if I uninstall Word 2010 and return to a version that worked?

"GSHancock" wrote in message news:[email protected]...
Unfortunately the document is a section from an unpublished game manual, and falls under "sensitive" in its entirety. However, I will share this experiment with you; I deleted the entire manual's text and wrote a few lines, then saved the document. When
I loaded it again, it came up in Layout View... so the problem may lie somewhere in the formatting of one of the section breaks? Weirdest thing.
OK, I see why you can’t share the content. :-)
Your observation does suggest a formatting problem. Continuing on that idea, working with a copy on the original document of course, you could split the document in halves (via Save As); then see which half shows symptoms of the problem. Split the problem
document again, and again, until you have isolated the problem.
Alternatively, if you want a quicker fix, the following would be worth trying: Delete all section breaks and then copy the content, minus the final paragraph mark (¶), into a new document.
To show/hide nonprinting marks, including paragraph marks, click the ¶ button on the Home tab.
Stefan Blom, Microsoft Word MVP

My apple TV will not show my iPhotos travel photos in sequence. I set up a sequence of photos that STAY in sequence when viewing in iPhoto on my iMac, but they do not show in sequence when my Apple TV shows them on my TV screen. My Apple TV is MC 572C/A

My Apple TV will not show my photos in iPhoto on my iMac in the same sequence of images that I can see when viewing the iPhoto photos on my iMac. This is especially frustrating when I try to show my travel pictures in sequence on my TV. I have to resort to showing them on my iMac which defeats the principle purpose for purchasing my MacTV. Does anyone have a solution?
My Apple TV is Model MC 572C/A and the software is 5.2.1 (6025)
My iMac is Mac OSX version 10.7.5
THANKS!
Doug May

I can't recall whether slideshows are ordered by title or date, but you can manually re-arrange the albums in iPhoto, then batch change them once you have the order you want.

Bookmarks toolbar Firefox 10.0.2/OSX 10.6.8 - gone. View Toolbars Bookmarks Toolbar - checked. Dragging URL's to bookmarks toolbar area no longer works. Gray area appears/disappears when checked/unchecked but will not show any or accept new bookmarks.

My bookmarks toolbar in Firefox 10.0.2 Mac OSX 10.6.8 suddenly disappeared. View>Toolbars>Bookmarks Toolbar is checked. Dragging URL's to the bookmarks toolbar area no longer works. The gray area appears and disappears when checking/unchecking under View/Toolbars menu, but will not show any or accept addition of bookmarks.

Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

Safari 7.0.5 Will not show a pdf. I Can't view, save, download or print a PDF. Just get a black page.

Safari 7.0.5 Will not show a pdf. I Can't view, save, download or print a PDF. Just get a black page.

Macintosh HD > Library > Internet Plug-ins
Look for these two files.
AdobePDFViewerNPAPI.plugin
AdobePDFViewer.plugin
Right click those and select “Move To Trash’.

When I place a clip in the timeline and try to watch it, the viewer says "Unrendered" and it will not show the clip

When I place a clip in the timeline and try to watch it, the viewer says "Unrendered" and it will not show the clip. What do I need to do to fix this?

Option 1: Render the clip in FCE then watch it.
Option 2 (preferred): Convert the clip so it will match your Sequence settings in FCE prior to importing the clip into your project. It will not need rendering if converted properly.
-DH

Preview window in premiere 10 will not show view video images

My Premiere 10 preview window will not show video images. There has been some on-line discussion that nVidia GeForce video card automatic updates is the problem and it has been suggested that I roll back to a previous card however the rollback button does not light up and can not be activated. Also I'm not sure that I'm using the correct settings for the preview window, what are the default settings?

I recommend that you try your question in premeire forum, so you have a better chance of getting an answer.
http://forums.adobe.com/community/premiere_elements - premeire elements
http://forums.adobe.com/community/premiere - premeire pro

PHP icon not showing in design view

I just ordered Studio 8 and currently working on the demo
version of Dreamweaver 8. I had been using FrontPage for many years
and I finally hit it's limitations. I am creating new pages from
scratch and not importing any of my older FrontPage web pages. I am
coding in PHP and noticed this nice php icon that shows in my
design view of where all my php code is. This FrontPage could never
do. I have a table that is doing multiple "include" calls. I am
able to successfully add 2 lines of code, which generates two php
icons in my design view. When I try to add a 3rd line of php code,
it removes all of the nice php icons in the design view. For the
rest of the document, if I add more code, then the icons will not
show up. The PHP is in the code view, but the design view is no
longer showing the php icon. Does anyone have any ideas on how to
make them show up permanently? This is one of many great features
of Dreamweaver that drove me to purchase it.

Thank you for the quick response. I went home and took a look
at my code. It matches pretty closely with what you offered as a
suggestion. That didn't seem to fix the issues I am having. Maybe
there is something I am missing that will stand out for you.
Here is a sample of it:
<td>Item Review 1</td>
<td><div align="center"><?php include('
http://www.mytestsite.com/review/stars_only_by_item_id_listing.php?item_id=5');
?></div>
</td>
<td><div align="center"><a href="
http://www.mytestsite.com/review/index2.php?item_id=5">
link</a></div></td>
</tr>
<tr>
<td>Item Review 2</td>
<td><div align="center"><?php include('
http://www.mytestsite.com/review/stars_only_by_item_id_listing.php?item_id=6');
?></div></td>
Thank you for any help you can offer. This one is really
stumping me. Could it be that I am using the demo version and not
the full version?

PHP Include not showing in design view

One of the advantages of Dreamweaver is the ability to see
the result of your code in the Design view. I am building a
template set for a web site I'm starting, and will be using the
template files in various paths and path depths. As a result, I am
not interested in using relative paths for things like PHP
includes.
If I use the following code for an include, the 'main.php'
file is included in the design view:
<?php include('/includes/templates/main.php'); ?>
When uploaded to the Apache server, this does not display
properly, because it is looking for the file in the user root, not
the Apache document root.
The portable code solutions to this would be to use the
following code:
<?php
include($_SERVER['DOCUMENT_ROOT'].'/includes/templates/main.php');
?>
This shows perfectly when uploaded to the Apache server, but
of course does not show in the Design view of Dreamweaver.
It is ridiculous to think that someone would want code one
way to see in the design view, and another for the web server, so I
am assuming that there is a way to do this so that it works both in
the desing view and on the web server.
I have had limited success using:
<?php virtual('/includes/templates/main.php'); ?>
which shows up in both the design view and on the web server.
However, I've experienced problems using virtual calls in scripts
called by the virtual command. I.e. nested inclusions. It would be
important to note that PHP's own documentation states "This
function may be used on PHP files. However, it is typically better
to use include() or require() for PHP files.", along with other
warnings.
So, basically, what I am asking for is a solution to allow
the following code to work and show the included file in the design
view:
<?php
include($_SERVER['DOCUMENT_ROOT'].'/includes/templates/main.php');
?>
Any suggestions?
BTW, I have tried setting the PHP include_path to the web
root so that the first example above would work. Doesn't work. I
have full, unrestricted access to the server, so if there is
another setting or configuration change I can make to have the
include function default to the web root, I'd love to know what it
is.

quote:
Originally posted by:
Newsgroup User
It does that with all server-side includes, not just PHP. It
only shows
the HTML content of includes. To see dynamic output from a
server-side
language, you need to use Live Data view.
I'm not referencing dynamic output from PHP processing. I am
referencing includes. When using an include, Dreamweaver shows you
exactly what it would show you if you were looking at the included
file itself.
However, Dreamweaver makes the assumption that <?php
include('/inc/test.php'); ?> is a path located in the web server
document root. This is not the same assumption that web servers
make.
The Apache web server (at least the several that I use),
treat this same include as a request for /inc/test.php off of the
root of the server. To achieve the same include, relative to the
web document root, the include must be <?php
include($_SERVER['DOCUMENT_ROOT'].'/inc/test.php'); ?>.
Unfortunately, Dreamweaver does not understand this basic syntax
and will not show the included file in the design view.
The bottom line is that Dreamweaver could make it much
simpler to build portable code if it understood this syntax on the
include. You could take place that include in any location on your
site and it would pull the include from the proper location in both
your design view and on the web server.
Keep in mind that we establish a "document_root" when we set
up a site in Dreamweaver. The information is already there. The
handling of it just needs to be added to the include parser.

My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

Hey there Kellee,
It sounds like the device drivers for your iPhone are working in Windows, but the phone is not showing in iTunes. You should be able to get that showing again with the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Start with these three steps, and there are more in the article if you need them.
1. Update iTunes
Check that you have the latest version of iTunes installed on your computer. In iTunes, select "Check for updates" in the Help menu.
2. Check the USB cable
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might support only charging those products (and not transmitting data) or they might work only with the product with which they were sold. Using one of these cables to sync could cause issues. If you are using a third-party case, such as an extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
3. Verify that Apple Mobile Device Support is installed
iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
Windows XP: Click Start and choose Control Panel. Open the "Add or Remove Programs" control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows Vista and Windows 7: Click Start and choose Control Panel. Click "Uninstall a program" (or if using Windows Vista's Classic View of the Control Panel, click "Programs and Features"). Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type Control Panel,and press Return. Click "Uninstall a program". Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. Follow the steps appropriate for your Windows operating system below:
Reinstall iTunes for Windows XP
Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
If after reinstalling iTunes Apple Mobile Device Support is still not installed, follow steps in Trouble installing iTunes or QuickTime for Windows.
Thank you for using Apple Support Communities.
Regards,
Sterling

Elements 5 - Organizer will not show thumbnails

Recently moved Elements 5 to my new laptop - On the laptop the organizer will not show photos in any view other than single picture. Anything smaller shows the hour glass [also shows on the collections icons]. I deleated the first catalog transfer and have been only using new photos transfered from my D-50. It will run full screen shows just nothing smaller that a single picture view. I also uninstalled and reinstalled the Elements software.
I have unchecked the filer checker.
Systems is a Vista home premium 64 bit, 4 gig of ram, Lenovo ideapad laptop 5800T processor. Version 5.0.2
Any ideas?
Alan

I can't be sure this is the problem, but ...
Is this the first time you have opened PSE5 on this computer? If so, it truly is generating the thumbnails. Your statement about how in single image mode the thumbnail appears is a symptom of this phase of the operation. Just let it run. It will finish, and the problem will be gone.

When using spotlight search on my 5s it will not show past text messages that haven't even been deleted even if I type a specific word that I know is in a message I want to search for. I have message search turned on in the spotlight settings.

When using spotlight search my phone will not show all text messages with a common word even though I have not deleted any messages from my phone and I have the message search turned on in settings under spotlight search. The search only shows the messages that are recent within the past day or so. Why won't it show the other messages when I search for them even using a specific word that I know was in the message I'm searching for.

Hello ChiomaM,
It sounds like you are not getting notifications for new text messages that are coming in, and you must manually check the app. I recommend checking the Notification settings to see if they are configured correctly:
iOS: Understanding notifications
http://support.apple.com/kb/ht3576
iOS apps can provide three types of notifications:
Sounds: An audible alert plays.
Alerts/Banners: An alert or banner appears on the screen.
Badges: An image or number appears on the application icon.
You can view which apps provide notifications and adjust notification settings using Settings > Notification Center. For additional information, refer to the user guide for your device.
Thank you for using Apple Support Communities.
Regards,
Sterling

TOC is not showing in document

The TOC is not showing up in the Document Inspector. I have no way of actually creating one. Help.

Hi Marrietta,
A TOC is made up of paragraph styles that you specify in Inspector > Document > TOC
This screen shot shows Heading 1 as a TOC Style. Heading 2 is greyed out because there are no paragraphs with that style in the document.
View > Show Styles Drawer to apply a style to a paragraph.
The TOC searches downwards. Click at the top of the document then Insert > Table Of Contents. It is highlighted in blue because it is selected. You can add more chapters later. Click on the TOC to update it.
Regards,
Ian.

TOC will not show in landscape view

Similar Messages

Maybe you are looking for